Public tenders for electrical in Robins-afb-ga United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

REPAIR OF ELECTRICAL PLUG-IN UNIT

Department of the Air Force, Air Force Materiel Command | Published January 8, 2016  -  Deadline January 25, 2016
cpvs

NSN:6625-01-552-7652 Noun: Repair of Electrical Plug-In Unit Quantity: 3 each

Repair of Electrical-Electronic Plug-in Unit

Department of the Air Force, Air Force Materiel Command | Published June 29, 2015  -  Deadline July 30, 2015
cpvs

NSN: 6625-01-552-7652 Noun: Electrical-Electronic Plug-in Unit Quantity: Basic Year - Two (2) each Required Delivery: 90 Days ARO Contract The RFQ will be issued on a limited source basis to Honeywell International, Inc. and National Instruments Corporation. The solicitation is expected to be issued approximately 29 Jun 15, with responses due 30 Jul 15. The RFQ will not be posted at www.fedbizopps.gov. If you desire (NO TECHNICAL DATA IS AVAILABLE) a copy of the solicitation, your e-mailed or faxed request must be submitted to carlos.renfroe@us.af.mil. No telephone request will be honored.

Repair of Electrical-Electronic Plug-In Unit

Department of the Air Force, Air Force Materiel Command | Published June 29, 2015  -  Deadline July 30, 2015
cpvs

NSN: 6625-01-552-7652 Noun: Electrical-Electronic Plug-in Unit Quantity: Basic Year - Two (2) each Required Delivery: 30 Days ARO Contract The RFQ will be issued on a limited source basis to Honeywell International, Inc. and National Instruments Corporation. The solicitation is expected to be issued approximately 29 Jun 15, with responses due 30 Jul 15. The RFQ will not be posted at www.fedbizopps.gov. If you desire (NO TECHNICAL DATA IS AVAILABLE) a copy of the solicitation, your e-mailed or faxed request must be submitted to carlos.renfroe@us.af.mil. No telephone request will be honored.

Institute of Electrical and Electronics Engineers (IEEE)

Department of the Air Force, Air Force Material Command | Published August 3, 2015  -  Deadline August 10, 2015
cpvs

Public Announcement of Intent to Purchase on a Sole Source Basis. The Government intends to procure a printed and online perpetual subscription for electronic access to Institute of Electrical and Electronics Engineers (IEEE) WILEY 2015 LIST for Air Force Institute of Technology (AFIT) libraries. NAICS: 519130, FSC: 7630, SIZE STANDARD: 500 employees. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. This synopsis is being published for informational purposes only. The proposed source is the Institute of Electrical and Electronics Engineers (IEEE). The proposed action is to acquire electronic and printed material for perpetual access beginning 01 September 2015. This notice of intent is not a request for competitive quotations. However, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the Air Force. The Government will consider any responses received within 6 days of issuance of this notice. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether or not to conduct a competitive procurement, and the Government does not intend to pay for any information received in response to this announcement. Any responses should be emailed to Glen M. Lange at glen.lange@us.af.mil no later than 10 August 2015, 4:00 PM EST. Any questions should be directed to Glen M. Lange through email.

Institute of Electrical and Electronics Engineers Digital Library

Department of the Air Force, Air Force Material Command | Published October 14, 2015  -  Deadline November 4, 2015
cpvs

Featuring content from IEEE as well as the IET, IEL contains almost one-third of the world's current literature in electrical engineering, communications, and computer science. unlimited, full-text access to more than three million documents; documents delivered in PDF and HTML (as available) formats; highly-cited, peer-reviewed research that fuels more new patents than any other publisher, including: 174 IEEE journals, magazines, and transactions, 26 IET journals and magazines, plus 20+ IET conference titles, proceedings from over 1,400 IEEE and IET annual conferences and more than 2,800 approved and published IEEE standards in key technology fields.

Airfield Electrical Vault and West Duct Banks

Department of the Army, U.S. Army Corps of Engineers | Published June 2, 2015  -  Deadline July 27, 2015
cpvs

This pre-solicitation notice was previously posted under W912DR014-S-0024 The proposed procurement is a 100% set-aside for small business. The NAICS Code is 236220 with a size standard of $36,500,000.00. This procurement is being advertised as a Two Phase Request for Proposal (RFP). The magnitude of construction is between $10,000,000 and $25,000,000. The completion period is expected to be approximately 365 calendar days from notice to proceed. The project consists of the design and construction of a 4,092 SF airfield lighting vault, regulators, electrical distribution systems (switchboards, panel boards, transformers), manholes, duct banks, generator, fuel storage tank, automatic transfer switch, remote data/telecom capability, HVAC, intrusion detection, and fire detection/protection systems. Demo and all necessary and required work associated with this project will be accomplished. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. This project will comply with DoD antiterrorism/force protection requirements per UFC 4-010-01. The Government is utilizing a Two Phase Best Value approach to select the Prime Contractor. An award will be made to the offeror whose proposal is determined to be the best value to the Government considering both price and technical factors. It is anticipated that Phase 1 will be released on or about June 15, 2015 with proposals due on or about July 15, 2015. Phase 1 of the solicitation will be provided in an electronic format, free of charge, to all authenticated account holders of Federal Business Opportunities (FBO) System. To familiarize vendors with the system, please download the Vendor guide by logging into https://www.FBO.gov. Please note that all Corps of Engineers acquisitions are considered Sensitive, but Unclassified documents, and require users to have a valid MPIN entered in the FBO system to access package. Phase 2 of the solicitation will only be available to those offerors selected to advance to Phase 2. The media through which the Government chooses to issue this solicitation will be the internet only. This solicitation will not be issued in paper. No phone or fax requests for copy of solicitation will be accepted.

Electrical Discharge Machine

Department of the Air Force, AFICA | Published November 21, 2014  -  Deadline December 8, 2014
cpvs

COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation ("synopsis" hereafter), which is expected to result in the award of a firm-fixed-price contract for commercial item (i.e. Electrical Discharge Machine), as described under the requirements section of this synopsis/solicitation or accompanying requirements attachment. This synopsis/solicitation is prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only synopsis/solicitation; proposals are being requested and a written solicitation will not be issued. An award, if any, will be made to the responsible Offeror who submits a proposal that: 1. Conforms to the requirements of the synopsis/solicitation. 2. That receives a rating of "Acceptable" on the Technical Capability evaluation factor. 3. That submits the proposal with the lowest total evaluated price (TEP), provided that the TEP is not unbalanced and is fair and reasonable. Submittal of quotes in response to this synopsis/solicitation constitutes agreement by the Offeror of all terms & conditions contained herein, which will also be the terms & conditions of any resulting contract. It is the Offerors responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions in full text may be accessed via the Internet at website http://farsite.hill.af.mil. The Government reserves the right to award without discussions or make no award at all depending upon the quality of proposals received and the price fair and reasonableness of proposals received. The synopsis/solicitation number for this requirement is FA8601-15-R-0009 and is hereby issued as a Request for Quotes (RFQ) using FAR Subpart 13, Simplified Acquisition Procedures. NAICS Code: 333517- Machine Tool (Metal Cutting Types) Manufacturing Business Size Standard: 500 Employees Acceptable means of Submission: All submissions must be submitted electronically to the following email address- julie.hansen.1@us.af.mil by 8 December at 1200 EST. Any correspondence sent via e-mail must contain the subject line "FA8601-15-R-0009" The entire proposal must be contained in a single e-mail, unless otherwise approved and that does not exceed 5 megabytes including attachments. E-mails with compressed files will not be accepted. Note that e-mail filters at Wright-Patterson Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. This synopsis incorporates FAR provisions and clauses in effect through Federal Acquisition Circular (FAC) Fac 2005-77, effective 13 Nov 14; Defense Federal Acquisition Regulation Supplement (DFARS) Publication Notice (DPN) 20141113, effective 13 Nov 14; and Air Force Federal Acquisition Regulation Supplement (AFFARS) Air Force Acquisition Circular (AFAC) 2014-1001, effective 01 Oct 14. Delivery Schedule: 30 days ARO Delivery Destination: 2230 10th St. Bldg 655 WPAFB, OH 45433 Delivery Type: FOB Destination (As defined in FAR 2.101-Definitions, the seller or consignor is responsible for the cost of shipping and risk of loss.) Inspection and Acceptance: Both inspection and acceptance will be by the Government at Destination. Requirements: The requirements for 1(one) 5 axis wire Electrical Discharge Machine are detailed below. All parts are brand name or equal. We require a computer numerical controlled machine able to machine a material using electrical discharges using wire and the workpiece as electrodes separated by a dielectric liquid. 1. Travel (X/Y/Z/U/V) (equal or greater than 600 x 400 x 300 x 75 X 75 mm) 2. Maximum Workpiece Size (x/y/z) (Greater than 800 x 800 x 300 mm) 3. Maximum Workpiece Weight or Mass (Greater than 500 kg) 4. Floor Space Footprint (Less than 2413mm x 4064mm OR less than 95" x 160") Plus/Minus 100mm a. User controls must be on the narrow side (side with less than 95") 5. Table- Number of Sides (Require 3 or 4) 6. Surface Finish Capability- Automatic Multiple Pass Technology to result in better surface finish 7. Software to automatically assist technicians to improve processing conditions 8. .010" Wire Guide included 9. Automatic electrical control adjustment control system for corner correction and cutting condition optimization 10. Auto wire threading 11. 15"+ Touchscreen 12. 10 year warranty on main XY movement systems (ball screws or linear motors) 13.

Test Set, Electrical

Department of the Air Force, Air Force Materiel Command | Published August 18, 2016  -  Deadline September 1, 2016
cpvs

Link To Document

59--Electrical and Electronic Equipment Components

Department of the Air Force, Air Force Materiel Command | Published May 27, 2015
cpvs

No Description Provided

59--Electrical and Electronic Equipment Components

Department of the Air Force, Air Force Materiel Command | Published March 2, 2016  -  Deadline April 4, 2016
cpvs

No Description Provided

AIRFIELD ELECTRICAL VAULT AND WEST SIDE DUCT BANKS (SOLICITATION #: W912DR-15-R-0038)

Department of the Army, U.S. Army Corps of Engineers | Published June 1, 2015  -  Deadline June 15, 2015
cpvs

NOTICE: THE SOLICITATION NUMBER FOR THIS PROCUREMENT IS W912DR-15-R-0038 The proposed procurement is a 100% set-aside for small business. The NAICS Code is 236220 with a size standard of $36,500,000.00. This procurement is being advertised as a Two Phase Request for Proposal (RFP). The magnitude of construction is between $10,000,000 and $25,000,000. The completion period is expected to be approximately 365 calendar days from notice to proceed. The project consists of the design and construction of a 4,092 SF airfield lighting vault, regulators, electrical distribution systems (switchboards, panel boards, transformers), manholes, duct banks, generator, fuel storage tank, automatic transfer switch, remote data/telecom capability, HVAC, intrusion detection, and fire detection/protection systems. Demo and all necessary and required work associated with this project will be accomplished. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. This project will comply with DoD antiterrorism/force protection requirements per UFC 4-010-01. The Government is utilizing a Two Phase Best Value approach to select the Prime Contractor. An award will be made to the offeror whose proposal is determined to be the best value to the Government considering both price and technical factors. It is anticipated that Phase 1 will be released on or about June 15, 2015 with proposals due on or about July 15, 2015. Phase 1 of the solicitation will be provided in an electronic format, free of charge, to all authenticated account holders of Federal Business Opportunities (FBO) System. To familiarize vendors with the system, please download the Vendor guide by logging into https://www.FBO.gov. Please note that all Corps of Engineers acquisitions are considered Sensitive, but Unclassified documents, and require users to have a valid MPIN entered in the FBO system to access package. Phase 2 of the solicitation will only be available to those offerors selected to advance to Phase 2. The media through which the Government chooses to issue this solicitation will be the internet only. This solicitation will not be issued in paper. No phone or fax requests for copy of solicitation will be accepted.

39--Non-ACAT, MMHS, Additional electrical work at Kirtland ANGB

Department of the Air Force, Air Force Materiel Command | Published November 17, 2015
cpvs

No Description Provided

IEEE Xplore

Department of the Air Force, Air Force Material Command | Published October 15, 2015  -  Deadline November 5, 2015
cpvs

Provides full-text access to IEEE (Institute of Electrical and Electronics Engineers - US) and IEE (Institution of Electrical Engineers - UK) transactions, journals, magazines, and conference proceedings published since 1988 (plus select content back to 1893), and all current IEEE Standards. The database includes some of the most read titles covering electrical, electronics, and computer engineering and science.

Buffer Connector

Department of the Air Force, Air Force Materiel Command | Published October 15, 2014  -  Deadline October 30, 2014
cpvs

The government has a requirement to purchase 1471 electrical connectors. NSN: 5935-01-336-3017, P/N: 44095-30P-303/654478-3. This requirement is initiated to obtain a firm fixed price contract for spares in support of the AIM-120 missile and missile launcher. APPL: The AIM-120 missile buffer connector provides electrical connectivity between the LAU-12X launcher and the missile. The initial quantity for the basic year is 1471. There will be 4 - out-year options with a quantity of: 1st Outyear Option = 1-1000, 2nd Outyear Option = 1-1000, 3rd Outyear Option = 1- 1000, and the 4th Outyear Option = 1-1000. The approximate response date is 30 Oct 2014. No telephone requests. Only written, faxed, or electronic requests received directly from the requestor are acceptable. Specifications, plans, and drawings relating to the procurement described are not available at this time, and cannot be furnished by the government. The only approved source for this item is HIREL Connectors Inc. The required delivery schedule is 300 units per month with a final delivery by 31 Dec 2015. F.O.B. Origin/Destination, inspection and acceptance at origin. Height: 1.5 inches, Width: 1 inch, Depth: 1 inch, Pounds: .5 ounces. Predominant Material of Manufacture: Steel. The connector provides the electrical connection between the AMRAAM missile and the aircraft launcher.

Data Center Reconfiguration

Department of the Air Force, Direct Reporting Unit - Air Force District of Washington | Published July 31, 2015  -  Deadline August 14, 2015
cpvs

The primary objective is to obtain a full range of data center electrical services from APC authorized master electricians, technical data center subject matter experts (SME), project managers, and skilled data center support services to oversee, advocate, and support the 744th CS Data Center Manager in the reconfiguration of the Data Center. All personnel must be APC Elite Partners.

AutoCrib Automated Inventory Cabinet/Equipment

Department of the Air Force, Air Force Materiel Command | Published June 15, 2016  -  Deadline June 21, 2016
cpvs

This is a brand name requirement for AutoCrib. The 461 AMXS has a requirement for a computerized, secure & access controlled, mobile, ScaleMate, flexible, simple & fast AutoCrib automated inventory cabinet/equipment that provides a means of measuring and supplying and tracking common use items. Examples of 461 AMXS common use bench stock items are abrasives, O-rings, nuts, bolts, clamps, washers, electrical, tapes and other like items used in the maintenance, repair and overhaul process.

FA8534-17-F-0036 - BEAR Primary Switching Center

Department of the Air Force, Air Force Materiel Command | Published April 10, 2017
cpvs

This acquisition is for six (6) BEAR PSC, part number PDS-PSC-AR/AF, needed to satisfy urgent requirements to complete BEAR BPU High Power deployment packages. The PSC is a critical part in the BEAR BPU Electrical Distribution System.Requirement is for six (6) units. Delivery is 120 days ARO. Period of performance is 120 days, or 3 months. This is a sole source acquisition to PD Systems, Inc., IAW FAR 8.405-6(a)(1)(i)(B). This order was placed against GSA Schedule Contract GS07F0543W with PD Systems, Inc.

Wiley eBooks Backfile

Department of the Air Force, Air Force Materiel Command | Published February 11, 2016  -  Deadline February 16, 2016
cpvs

Public Announcement of Intent to Award on a Sole Source Basis. The Government intends to procure access to The Institute of Electrical and Electronics Engineers (IEEE) - Wiley eBooks backfile for the Air Force Research Lab library.  NAICS: 519130, FSC: 7630, SIZE STANDARD: 500 employees.  The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1.  This synopsis is being published for informational purposes only.  The proposed source is The Institute of Electrical and Electronics Engineers (IEEE).  This notice of intent is not a request for competitive quotations.  However, all responsible sources may submit a capability statement, proposal, or quotation, which shall be reviewed by the Air Force.  The Government will consider any responses received within 5 days of this posting.  A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.  Information received will normally be considered solely for the purpose of determining whether or not to conduct a competitive procurement, and the Government does not intend to pay for any information received in response to this announcement.  Any responses should be emailed to David Gunkelman at david.gunkelman.1@us.af.mil no later than 2:00pm EST 16 February 2016.  Any questions should be directed to David Gunkelman via email.

Electric Lithium Crawler

Department of the Air Force, Direct Reporting Unit - Air Force District of Washington | Published September 23, 2015  -  Deadline September 28, 2015
cpvs

Link To Document Total Small Business US 20762 3710 Fetchet Ave JB Andrews, MD

Electric Stock Pickers

Department of the Air Force, Air Mobility Command | Published June 1, 2015  -  Deadline June 22, 2015
cpvs

Combined Synopsis / Solicitation 87CONS This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number FA4484-15-T-0023 is being issued as a Request for Quote (RFQ) using the Simplified Acquisition Procedures in accordance with FAR Part 13 guidelines. The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-82 This solicitation has been set aside 100% for small business. The North American Industry Classification code for this procurement is 333924 Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing. The Standard Industry Code for this procurement is 3534. The small business size standard for this procurement, as defined by the U.S. Small Business Administration, is 750 employees. The Government will award to the lowest price technically acceptable offeror. Technically acceptable is defined as providing the minimum requirements for the Electric Stock Picker(s) as listed below: Stock Picker: Minimum Platform Height: 118 inches Power Source Electric Maximum Width: 40 inches Minimum Operator Capacity:250 pounds Charging System: Built-in 110V Safety Features: Dual foot sensors & dual hand sensors Rail Guide Rollers Battery Discharge Indicator Horn The Government will award a firm fixed price contract for these vehicles It is the vendor's responsibility to be familiar with all applicable clauses and provisions. All Offerors must submit representations and certifications in accordance with the provision at FAR 52.212-3, Offeror Representations and Certifications Commercial Items, with their offer. FAR 52.212-3 can be downloaded from the internet: http://farsite.hill.af.mil/ Offerors that fail to furnish the required representation information, or reject the terms and conditions of the solicitation, may be excluded from consideration. DFARS 252.212-7000 Offeror Representations and Certifications - Commercial Items (Jun 2005). All FAR Clauses and provisions incorporated by reference may be viewed in full text via the Internet at http://farsite.hill.af.mil/ The following provisions and clauses apply to this acquisition have been attached to Solicitation FA4484-15-T-0023 The Government reserves the right to award on a multiple award or an all or none basis. Offers are due to the Contract Specialist by 22 June 2015 at 1600 (4:00 PM) EST, as outlined in the attached RFQ. Offers may be submitted by mail, e-mail, or facsimile. Please contact Mrs. Zaquette Everett at (609) 754-4861 or Mr. Raymond Mesler at (609) 754-8917 for information regarding the solicitation.