Call +44 800 9755 164

Public tenders for electrical in East-northport United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

Common Electrical Hull Penetrator

Department of the Navy, Naval Sea Systems Command | Published November 12, 2015  -  Deadline March 25, 2015
cpvs

This requirement was solicited as unrestricted and awarded to L.L. Rowe Company of Woburn, MA in accordance with FAR 6.101, 10 U.S.C. 2304 and 41 U.S.C. 3301 - Full and Open Competition. This Indefinite Delivery Indefinite Quantity contract contains firm fixed price provisions. This contract is to develop, fabricate, test, qualify, manufacture, and deliver Common Electrical Hull Penetrator (CEHP) in support of Virginia Class submarines.

N--Install One EGX300 Data Logger

Department of Veterans Affairs, Bronx VAMC (NAL) | Published December 14, 2015  -  Deadline December 18, 2015
cpvs

Response date (Deadline): December 18, 2015 STATEMENT OF WORK Electrical Substation Data Logging Northport, NY PART 1. GENERAL INFORMATION: A. INTRODUCTION: The scope of this contract is to provide the Department of Veterans Affairs (VA) with the cost estimate, purchase, installation and training of an electrical data logging system for the 5 electrical utility feeders in the Northport VAMC electrical substation in building 209 located at the Northport VAMC. B. BACKGROUND: B.1. Electrical power is fed into the Northport campus via two utility feeds. One from the Northport (Elwood) feed and the other is from the Indian Head (Pulaski) feed. The VAMC segregates power from the two substations to five campus electrical feeders. 2 feeders, "B" and "C" are fed from the Indian Head (Pulaski) feed. 3 feeders, "A", "D" and "E" are fed from the Northport (Elwood) feed. B.1. The substation is set up so that in the event of a power failure from one of the power stations, the circuit breakers in the substation can be switched from either open to closed or closed to open across a main tie breaker, which would allow power from one substation to traverse the tie breaker and feed the failed side with electricity while not pushing power back out to the grid. The key here is that the circuit breaker from the failed side must be open to disallow electricity flow back out onto the grid until PSEG has corrected the problem and energized the incoming line again. While the system is currently configured to manually perform this action, new switchgear is in design to automatically switch the circuit breakers on and off correctly through another project. B.2. The future project that will replace the current substation, which is over 40 years old, with an entirely new substation is set to begin sometime in 2016. But to do this, Northport VAMC's electric utility provider, PSEG needs to tell the VA what type of protective gear the VA needs to place on the upstream side of the line to make sure we protect the local electrical feeds that distribute power to the Northport VAMC campus. B.3. The data that PSEG and Northport VAMC will need to design the upstream utility protection and downstream (on-campus) utility distribution requires real-time electrical data from each of the 5 electrical feeders (A, B, C, D and E). This data needs to be gathered on each of the three electrical legs in each feeder as electricity is sent out into the campus. C. SCOPE: C.1. GENERAL: The contractor shall purchase, install and train Northport VAMC personnel on the Schneider Electric EGX300 Integrated Gateway Server electrical data logger. C.2. REQUIREMENTS: C.2.1. One or more data loggers need to be installed to collect data output by the Square D (Schneider Electric) Series 2000 - Power Logic Circuit Monitors that are residing on each of the 5 electrical substation feeders (A, B, C, D and E) located in building 209. The data logger must be seamlessly compatible with Power Logic Circuit Monitors. C.2.2. The Schneider Electric EGX300 - Integrated Gateway Server is the recommended data logging unit to use. C.2.3. The Circuit Monitors located on each electrical feeder shall be serially wired across the RS485 onboard circuitry. The wires shall pass between electrical cabinet either through pre-existing open pathway or through installed through-hull electrical connectors. On the last Circuit monitor, the RS485 wires shall be connected to the Schneider Electric EGX300. C.2.4. The Schneider Electric EGX300 shall be mounted on the outside face of the campus feeder closest to the west door of the substation to allow access to the Ethernet port in such a way that an Ethernet cable can connect to the EGX300 periodically to download data. C.2.5. A 20' Ethernet cable will also be supplied by the contractor. C.2.6. The contractor will have previous knowledge of Schneider software. C.2.7. The contractor will provide training to Energy Manager and VA Northport Electricians on how to retrieve data via Ethernet connection. PART 2. WORK REQUIREMENTS: A. TECHNICAL REQUIREMENTS: A.1. POWER LOGIC ETHERNET GATEWAY EGX300: A.1.1. Installation: A.1.1.1. Install at least 1 x Power Logic Ethernet Gateway EGX300 on the proximal (closest) campus electrical feeder. Do not install on the utility feed cabinets labeled "Northport" or "IndianHead". A.1.1.2. Connect EGX300 to Square D Power Logic Circuit Monitor via RS485 wires in serial fashion. Follow Power Logic Ethernet Gatway EGX300 Installation Guide 63230- 319-212A1 directions. Use Belden 8723 or 9842 wiring for serial connections. A.1.1.3. Access setup menu via Ethernet connection by typing address 169.254.0.10 into internet interface software (Internet Explorer, Safari, FireFox or Chrome). Setup logging on EGX300 to acquire data at a minimum of 15 minute intervals. Minimum logged data must include voltage and current of each campus feeder (A, B, C, D and E) on 15 minute intervals. Ideally, Northport would like to log the voltage and current of each leg of wire in each campus feeder on 5 minute intervals. A.1.1.4. Follow Power Logic Ethernet Gateway EGX300 User's Guide for correct setup. Document # 63230-319-216A1. A.1.1.5. Verify EGX300 is properly recording data via Ethernet cable data download into MS Excel format. A.1.2 Training Contractor shall train VA Northport energy manager and electricians on data retrieval PART 3. SUPPORTING INFORMATION: A. PLACE OF PERFORMANCE: A.1 WORK PERFORMANCE LOCATION: VAMC Northport Building 209 - Electrical Substation 76 Middleville Rd. Northport, NY 11768 B. PERIOD OF PERFORMANCE: The Government estimates that the design specified in this Statement of Work shall be performed within 10 calendar days after receiving the award/ notice to proceed. Construction Administration Services will be determined at time of Construction award. C. SECURITY: C.1. The A/E shall follow all Government rules and regulations regarding information security to prevent disclosure of sensitive information to unauthorized individuals or organizations. C.2. VA Handbook 6500.3 defines the procedures for Certification and Accreditation (C&A) of VA Information Systems. C&A is the process used to ensure information systems including major Applications (MA) and General Support Systems (GSS) have effective safeguards which have been implemented, planned for, and documented in a system security plan as commensurate with potential risks to the system's information. Since this acquisition will not require services that involve connection of one or more A/E-owned IT devices (such as a laptop computer or remote connection from a A/E system) to a VA internal trusted (i.e. non-public) network, C&A requirements do not apply, and a Security Accreditation Package will not be required. C.3. A/E staff and management may have access to some privileged and confidential materials of the United States Government such as budget and strategic plans. These printed and electronic documents are for internal use only, are not to be copied or released without permission, and remain the sole property of the United States Government. Some of these materials may be protected by the Privacy Act of 1974 (revised by PL 93-5791) and Title 18. Unauthorized disclosure of Privacy Act or Title 18 covered materials is a criminal offense.

Various Electrical Repairs at the Rose Lake PMC - Michigan

Department of Agriculture, Natural Resources Conservation Service | Published September 8, 2015  -  Deadline September 25, 2015
cpvs

USDA, Natural Resources Conservation Service in Michigan is planning to have repairs made to the electrical system at the Rose Lake Plant Materials Center in East Lansing, Michigan. The duration of the contract is approximately 10 calendar days from the Notice to Proceed. Any contract resulting from this solicitation will be a firm fixed price contract. The North American Industry Classification for this acquisition is 238210 and the size standard is $15 million. This solicitation is issued as a Small Business Set-Aside. The magnitude of proposed construction is less than $25,000. The solicitation package along with the specifications will be issued as a Request for Quote and will be available for downloading from the Federal Business Opportunities website at www.fbo.gov on or around September 8, 2015. A site visit will be held on September 15th at 1:00 P.M. (EDT) at 7472 Stoll Road, East Lansing, MI 48823. Quotes are due by 2:30 P.M. EDT, September 25, 2015, at USDA-NRCS, Attn: Contracting Officer, 3001 Coolidge Road, Suite 250, East Lansing, MI 48823. Quotes will also be accepted via facsimile at (855) 693-2502 or via email to gay.mullen@mi.usda.gov. A Notice to Proceed is expected to be issued on or about September 30, 2015 with construction to begin within 10 days of issuance. The Davis-Bacon Act Wage Determination No. MI150084 dated August 21, 2015 applies. PLEASE NOTE: Contractor will be required to follow the USDA-NRCS Supplement to OSHA Part 1926. Notification of any changes to this solicitation (amendments) shall be made only on the internet. It is therefore the contractor's responsibility to check the above listed web address daily for any posted changes to this solicitation. Downloading from the internet is free of charge; however, specifications and drawings may take a considerable amount of time to download. Telephone and fax requests will not be accepted for request for copies of the solicitation. E-mail all questions to the Contracting Officer, Gay Mullen, at gay.mullen@mi.usda.gov. All contractors must register with the System for Award Management (SAM) database at www.sam.gov. The first step in registering is to obtain a Data Universal Numbering System (DUNS) number, which is a unique nine-character identification number provided by the commercial company Dun & Bradstreet (D&B). To request a DUNS number call D&B toll free at 1-866-705-5711. Obtaining a DUNS number through this process is free of charge. It behooves anyone who is submitting a bid to begin this process as soon as possible since it can take several days or longer to complete. Failure to register may cause a rejection of your offer.

J--Relocate & Install Wheelchair Washer Northport

Department of Veterans Affairs, Bronx VAMC (NAL) | Published November 5, 2015
cpvs

STATEMENT OF WORK (SOW) - Wheelchair Washer Installation Introduction and Overview: This Statement of Work is to relocate and install a wheelchair washer and the removal of a large station scale. Background: The scale in need of removal is a large 2,000 lb. inlaid, Detecto station scale. The wheelchair washer is an Aqua Phase AQ4000 sealed washer. The Wheelchair Washer's total Outer Dimensions are: Width 63 ¼" Length 96 3/4 , Height 73". Effective Chamber Dimensions-Width 40 ½" Length-93 ¾". Height 93 ¾" Objectives: VAMC Northport's wheelchair washer, once installed, will allow the station to clean our rolling stock in-house without seeking the services of an outside contractor. This will result in significant savings for Veterans Affairs. Period of Performance- Contractor is expected to complete work within 45 days of award. Place of Performance: Building 200, Scale Room near loading dock area. Scope of Work: The scope is to install a wheelchair washer and remove a large station scale. After removal of the scale, the area must be filled in with rebar and cement to make level with existing floor. The double doors in this area must be removed to install the new wheelchair washer. Connect electric to existing electrical outlets. Connect water supply to existing water lines. Test unit operation after installation. Safety Codes- It will be expected that VAMC safety codes will be adhered to with the hardware to be installed. Installers should follow safety guidelines pertaining to professional code standards. Special Material Requirements-The Aqua Phase wheelchair washer, once relocated, needs hookups to two hoses-one for hot water and one for drain. The Aqua Phase 4000 will then have to be connected to the appropriate power source.

W--Rental of Two (2) 500 Ton Chillers

Department of Veterans Affairs, Bronx VAMC (NAL) | Published May 20, 2016  -  Deadline May 27, 2016
cpvs

A. GENERAL INFORMATION 1. Title of Project: Rental of Two 500 Ton Chillers. 2. Background: A catastrophic failure occurred in the air conditioning system's cooling towers that provide services to Building 200, Building 200N, Community Living Center 3, Community Living Center 4, and Building 9. As a result of this failure, chillers No 1, 2, 3, and 4 had to be taken out of service leaving these locations without air conditioning and dehumidification services. The chillers will remain out of service, for an indefinite period of time, until a permanent solution can be found to replace the cooling towers. Currently two portable chillers are in place to cover chillers No. 1 and 2. However, during the months of May, June, July, August, and September, the demands placed on the Medical Center's chillers increases significantly. A 2,000 ton demand is required to be met, daily, during these months. To meet this demand, two (2) additional 500 Ton Portable Chillers are required to be put in place of chillers No. 3 and 4. 3. Scope of Work: The contractor shall provide rental, mobilization, and demobilization of two chillers including other related items described below: 3.1 Rental: " Two (2) 500 ton air cooled chillers, 460 volt. " Four (2) 6 inch, 200 feet host kit. " Sixteen (16) 4/0 cable box, 100 feet or 50 feet sections. " Two (2) trailers. 3.2 Mobilization: " Delivery of two Chillers to the Chiller Plant located at Northport VAMC. " Delivery of trailers for these Chillers (No. 3 and 4) to the Chiller Plant located at Northport VAMC. " Delivery of all chilled water hoses to the Chiller Plant. " Delivery of all temporary electrical cables to the Chiller Plant. " Transportation of all equipment to the Chiller Plant located at the Northport VAMC from the contractors equipment storage location. " Hook-up and installation of all equipment to the Chiller Plant. 3.3 Demobilization: Demobilization shall consist of the following services: " The demobilization shall occur at the end of the period of performance. " Removal of two chillers (No. 3 and 4) from the Chiller Plant. " Removal of trailers for Chillers No. 3 and 4 from the Chiller Plant. " Removal of all chilled water hoses. " Removal of all temporary electrical cables. " De-installation and removal of all equipment. " Transportation of all equipment from the Chiller Plant from the Northport VAMC to the contractor's facility. 4. Performance Period: " Base Year: June 1, 2016 through September 30, 2016 5. Place of Performance: Department of Veterans Affairs Northport VA Medical Center Chiller Plant 79 Middleville Road Northport NY 11768. 6. Type of Contract: Firm Fixed Price (FFP) 7. Site Visit: Vendors are highly encouraged to attend a site visit to verify existing conditions and to get full understanding of the work to be performed. a. Date and time: Wednesday, May 25, 2016 at 10:00 am. E.T. b. Location: Department of Veterans Affairs Northport VA Medical Center 79 Middleville Rd. Engineering Main Office Bldg. 10, Room 216 Northport, NY. 11768 c. Point of Contact: John Derudder d. All questions must be submitted in writing via email to Delfo.Saco-mizhquiri@va.gov by Thursday, May 26, 2016 at 1:00 pm E.T. B. GENERAL REQUIREMENTS 1. Both chillers must meet the energy efficiency requirements. See table in the next section. 2. The mobilization, installation, and demobilization of two chillers shall occur between 8am-4:30pm. 3. The mobilization shall occur at the beginning of the period of performance. 4. The demobilization of Chillers shall occur at the end of the period of performance. 5. Upon mobilization, installation, and rental of the two chillers, the equipment shall be inspected by the Mechanical Shop Supervisor, Michael Romero. 6. Report of acceptance of delivery. Copy of report shall be submitted to the Chief, Engineering Service. 7. Inspections shall be coordinated with the Mechanical Shop Supervisor, Michael Romero. 8. Vendor shall show valid ID at police check point for access to the facility's repair site. D. CHANGES TO STATEMENT OF WORK 1. Any changes to this SOW shall be authorized and approved only through written correspondence from the Contracting Officer (CO). A copy of each change will be kept in a COR folder along with all other required documents. Costs incurred by the vendor through the actions of parties other than the Contracting Officer shall be borne by the vendor. F. CONTRACTOR PERSONNEL SECURITY REQUIREMENTS 1. The vendor shall not have access to the Department of Veterans Affairs' computer systems. The certification and accreditation (C&A) requirements do not apply and a Security Accreditation Package is not required. 2. All contractor employees and subcontractors under this contract or order are required to complete the VA's on-line "VA Privacy and Information Security Awareness and Rules of Behavior Training" - TMS Code "10176." 3. Contractors must provide signed certifications of completion to the Contracting Officer Representative (COR) during each year of the contract. This requirement is in addition to any other training that may be required of the contractor and subcontractor(s)." **This is a pre-solicitation notice. A request for quote (FRQ) will be posted soon**

23--Enclosed Trailer for Decon Equipment and Workstation

Department of the Army, National Guard Bureau | Published September 2, 2015  -  Deadline September 15, 2015
cpvs

Fully enclosed trailer designed to carry decontamination equipment and have an individual work station. Trailer has electrical requirements. Standard industry warranty required.

J--Relocate & Install Wheelchair Washer Northport

Department of Veterans Affairs, Bronx VAMC (NAL) | Published December 9, 2015  -  Deadline December 17, 2015
cpvs

Response date (Deadline):December 17, 2015 at 10AM STATEMENT OF WORK (SOW) - Wheelchair Washer Installation Introduction and Overview: This Statement of Work is to relocate and install a wheelchair washer and the removal of a large station scale. Background: The scale in need of removal is a large 2,000 lb. inlaid, Detecto station scale. The wheelchair washer is an Aqua Phase AQ4000 sealed washer. The Wheelchair Washer's total Outer Dimensions are: Width 63 ¼" Length 96 3/4 , Height 73". Effective Chamber Dimensions-Width 40 ½" Length-93 ¾". Height 93 ¾" Objectives: VAMC Northport's wheelchair washer, once installed, will allow the station to clean our rolling stock in-house without seeking the services of an outside contractor. This will result in significant savings for Veterans Affairs. Period of Performance: Contractor is expected to complete work within 45 days of award. Place of Performance: Building 200, Scale Room near loading dock area. Scope of Work: The scope is to install a wheelchair washer and remove a large station scale. After removal of the scale, the area must be filled in with rebar and cement to make level with existing floor. The double doors in this area must be removed to install the new wheelchair washer. Connect electric to existing electrical outlets. Connect water supply to existing water lines. Test unit operation after installation. Safety Codes: It will be expected that VAMC safety codes will be adhered to with the hardware to be installed. Installers should follow safety guidelines pertaining to professional code standards. Special Material Requirements: The Aqua Phase wheelchair washer, once relocated, needs hookups to two hoses-one for hot water and one for drain. The Aqua Phase 4000 will then have to be connected to the appropriate power source. Type of Procurement: The responses to this Request for Information (RFI) will help determine what, if any, type of set-aside. Contract Vehicle: The resulting contract vehicles from this process will be a firm fixed price. Responses to this notice will be used by the Government to make appropriate acquisition decisions. Responses to this notice should include company/individual name, a service capability statement, examples of similar facilities which you have provided services to, DUNS number, address, point of contact and social-economic category (ex: SBVOSB, VOSB, 8(a), HUBZone, WOSB, EDWOSB, Small Business). If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). Contractor must be registered in Central Contractor Registry (CCR) (see internet site: http://www.ccr.gov). Responses to this notice must be submitted in writing (email) and received not later than November 24, 2015 at 1:00PM. If you have any further question, please email me at Desiree.Flores@va.gov or call me at 7185849000 ext 6411. All interested parties should provide the following information via e-mail only to the Contracting Officer by the stated deadline Contracting Office Address: VISN 3 Network Contracting Office (NCO3) James J. Peters VA Medical Center 130 West Kingsbridge Road, Bronx, New York 10468-3992

N--Provation Medical Service

Department of Veterans Affairs, Bronx VAMC (NAL) | Published March 14, 2016  -  Deadline March 28, 2016
cpvs

Response date (Deadline): March 28, 2016 GASTROENTEROLOGY SOFTWARE as described in Section C located at the: Northport VAMC, 79 Middleville Road, Northport, New York 11768. I. REQUIREMENTS: The regulatory requirements extend to repairs performed by OEMs and required maintenance to return the equipment/instruments and systems to the manufacturer's original specifications. The repair and refurbishment process is subject to regulatory FDA audits and must comply with Medical Device Reporting (MDR) requirements. A. FULL SERVICE CONTRACT: Furnish all necessary labor, equipment, tools, materials, repair service, software updates, parts, etc., for complete Software Support Service as specified below in accordance with the terms, conditions and schedule of this agreement. B. BASE PERIOD: Date of Award The Government will have the Option to extend the Term of the contract for Four (4) additional years. C. SOFTWARE/EQUIPMENT MAINTENANCE: Site Name DESCRIPTIPTION SUPPORT NP VAMC MAINTENANCE MD GASTROENTEROLOGY SOFTWARE 12 MONTHS NP VAMC MAINTENANCE MULTICARE 12 MONTHS NP VAMC ORACLE SUPPORT 12 MONTHS II. DEFINITIONS/ACRONYMS: A. Biomedical Engineering - Chief or designee. B. CO - Contracting Officer. C. COR - Contracting Officer Technical Representative (Biomedical Engineering) D. PMI - Preventive Maintenance Inspection. Services which are periodic in nature and are required to maintain the equipment in such condition that it may be operated in accordance with its intended design and functional capacity with minimal incidence of malfunction or inoperative conditions. E. ESI - Electrical Safety Inspection. F. FSE - Field Service Engineer. A person who is authorized by the contractor to perform maintenance (corrective and/or preventive) services on the VAMC premises. G. ESR - Vendor Engineering Service Report. A documentation of the services rendered for each incidence of work performance under the terms and condition of the contract. H. Acceptance Signature - VA employee who indicates FSE demonstrated service conclusion/status and User has accepted work as complete/pending as stated in ESR. I. Authorization Signature - COR's signature; indicates COR accepts work status as stated in ESR. J. NFPA - National Fire Protection Association. K. CDRH - Center for Devices and Radiological Health. L. VAMC - Department of Veterans Affairs Medical Center M. OSHA - Occupational Safety and Health Agency. N. OEM - Original Equipment Manufacturer. O. AQL - Acceptable Quality Level III. CONFORMANCE STANDARDS: The contractor shall ensure that the equipment (hardware and software) functions in conformance with the latest FDA (medical device regulations (including but not limited to Class I, Class II, Class III and MDDS), validation, quality assurance and compliance), latest published edition of NFPA-99, TJC, OSHA, CDRH, ISO 9001, and any other performance standards and specifications used when the equipment was procured by VA and any upgrades/updates. IV. SECURITY: 1. All vendors/contractors will sign-in at the Biomedical Engineering Administrative Office building 11 room 1, before reporting to their respective work site. Each vendor/contractor will be issued a temporary identification badge that must be worn at all times above the waist, in front, with the face of the card visible. 2. If removable media (i.e. USB or DVD/CD Device) is required to service, troubleshoot or install/update software, then it must be scanned with an anti-virus program. The removable media is scanned with anti-virus software running current virus definitions prior to connection to any medical device at the scanning workstation located in Biomedical Engineering. Any vendor/contractor with patient sensitive information that is imported into the removable media device for any reason must purge all patient sensitive information prior to departure from the facility. 3. All items covered by the manufacturer's warranty, contractor service of any devices, systems, or other equipment containing media (hard drives, optical disks, etc.) with VA sensitive information must not be removed / returned to the vendor at the end of life, for trade-in, or other purposes. 4. Upon completion of the scheduled work, the vendor/contractor will return to the Biomedical Engineering Administrative Office building 11 room 1, to sign-out, return the temporary identification badge, and leave any Field Service Reports if necessary. 5. All medical device workstations and servers must be in compliance with MDIA (Medical Device Infrastructure Architecture) as well as comply with all FDA regulations. 6. Remote System Diagnosis: Proactive, remote monitoring and diagnosis shall be provided and covered by contractor, however contractor must meet strict VA guidelines on use of virtual private network (VPN) access. 7. Bio-Medical devices and other equipment or systems containing media (hard drives, optical disks, etc.) with VA sensitive information must not be REMOVED / RETURNED to the vendor at the end of lease, for trade-in, or other purposes. HOURS OF COVERAGE: A. Normal business hours of coverage are [24 hours per day, 7 days a week, 365 days per year], including federal holidays. All service/repairs will be performed during normal business hours of coverage unless requested and approved by [COR]. B. Hardware/software update/upgrade installations will be scheduled and performed outside normal hours of coverage at no additional charge to the Government (unless it would be detrimental to equipment up-time; to be determined by COR). C. Federal Holidays observed by the VAMC are: New Years Day Labor Day Martin Luther King Day Columbus Day President's Day Veterans Day Memorial Day Thanksgiving Day Independence Day Christmas Day And any other day specifically declared by the President of the United States to be a national holiday. V. MAINTENANCE SERVICES: A. The contractor shall maintain the equipment in accordance with the Conformance Standards Section, by furnishing all necessary labor, travel, management, equipment, tools, materials, repair service, instruments, and software updates for service (excluding consumables) in accordance with the terms, conditions and schedule of this agreement. The contractor will provide technical repair service which may consist of maintaining the equipment, including all intervening calls necessary between regular services and calibrations/testing of system operation. The contractor will provide all technical support. Contract Vehicle: The resulting contract vehicles from this process will be a firm fixed price. Responses to this notice will be used by the Government to make appropriate acquisition decisions. Responses to this notice should include company/individual name, a service capability statement, examples of similar facilities which you have provided services to, DUNS number, address, point of contact and social-economic category (ex: SBVOSB, VOSB, 8(a), HUBZone, WOSB, EDWOSB, Small Business). If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). Contractor must be registered in Central Contractor Registry (CCR) (see internet site: http://www.ccr.gov). Responses to this notice must be submitted in writing (email) and received not later than March 28, 2016. If you have any further question, please email me at Desiree.Flores@va.gov or call me at 7185849000 ext 6411. All interested parties should provide the following information via e-mail only to the Contracting Officer by the stated deadline Contracting Office Address: VISN 3 Network Contracting Office (NCO3) James J. Peters VA Medical Center 130 West Kingsbridge Road, Bronx, New York 10468-3992

USDC Clerks Kitchen Renovation

General Services Administration, Public Buildings Service (PBS) | Published April 24, 2015  -  Deadline May 12, 2015
cpvs

Renovation of the clerk's 1st floor kitchenette area. The total project includes, but is not limited to, removing existing kitchen cabinetry, installation of new kitchen cabinets, countertops, sinks, faucet, garbage disposal, under cabinet lighting and related electrical outlets. Existing carpeting will be replaced with hard flooring in areas and painting is to be performed.

Piezo-electric Ceramic Cylinders

Department of the Navy, Naval Sea Systems Command | Published June 14, 2015  -  Deadline June 23, 2015
cpvs

This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Request for Quotation (RFQ) number is N66604-15-Q-1658. This requirement is unrestricted. NAICS Code is 334511, Size standard is 750 employees. NUWC Division Newport intends to purchase four different sized piezoelectric ceramic rings to be integrated into an Engineering Development Model (EDM) 4-channel prototype design. The piezoceramic cylinder specifications are attached as attachment #1 and the applicable drawings are attached as attachment #2. Vendors must be JCP certified (see website http://www.dlis.dla.mil/jcp for further information) to receive access to the attachment #2 drawings. The POC listed on the JCP certification must be the person submitting the request for access to drawings or the JCP certification must be revised to the correct POC who is making the request. Offers must submit detailed product information and prices. Evaluation is based on the offer which is Low Price Technically Acceptable. Offers should also include delivery dates and terms and the following additional information: Cage Code and DUNS #. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-82. FAR 52.212-1 Instructions to Offerors--Commercial Items applies. FAR 52.212-4, Contract Terms and Conditions--Commercial Items and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items. The following addenda or additional terms and conditions apply: Defense Priorities and Allocations System (DPAS) rating is DO-C9, DFARS 252.225-7048, Export-Controlled Items applies. Offers must be submitted to Commercial Acquisition, Building 1258, Naval Undersea Warfare Center Division Newport, Code 0222, 1176 Howell St., Newport, Rhode Island 02841-1708, faxed to 401-832-4820 or e-mailed to debra.dube@navy.mil. Contractors must be registered in the System for Award Management (SAM) (https://www.sam.gov/portal/public/SAM/) to be eligible for award. Instructions for registration are available at the website. Required delivery is twelve (12) weeks after award of contract. F.O.B. Destination Naval Station Newport; Newport, RI. Offers must be received by 2:00 p.m. eastern time on 6/23/15. Offers received after this date are late and will not be considered for award. For information on this acquisition contact Debra Dube at 401-832-2281 or debra.dube@navy.mil.

Z--VA262-16-C-0214, UPGRADE Electric Utility for Medical Diagnostic Equipment, Bldg 164 ER

Department of Veterans Affairs, Long Beach VANLO | Published August 26, 2016  -  Deadline September 13, 2016
cpvs

No Description Provided

Indefinite Delivery-Indefinite Quantity Architect and Engineering Services Contract

Department of the Army, National Guard Bureau | Published April 19, 2017  -  Deadline May 24, 2017
cpvs

DESCRIPTION: Indefinite Delivery-Indefinite Quantity Architect and Engineering Services Contract. The United States Property and Fiscal Officer (USPFO) for Rhode Island, Rhode Island National Guard, intends to award a single firm fixed-price Indefinite-Delivery/Indefinite-Quantity (IDIQ) Architect-Engineer (A-E) Services contract. This announcement is being solicited as unrestricted. Small business size standard is $7.5 Million for NAICS 541310. The Points of contact for this announcement are Ms Mona Morin and Capt Timothy Caron. Submit questions to mona.morin.civ@mail.mil and timothy.j.caron.mil@mail.mil. CONTRACT INFORMATION: The work requires multi-discipline professional A-E services for various projects throughout the State of Rhode Island (RI Air National Guard/RI Army National Guard). Selection of a firm is not based upon competitive bidding procedures, but rather the process for A-E firm selection described in FAR Part 36 using the competitive ranking of firms based upon the professional qualifications necessary for the performance of the required services, as more fully set forth in the selection criteria. The competitive ranking will be followed by a negotiation with the most highly ranked firm and continuing to lower ranked firms only if satisfactory terms are not reached with the preferred firm as described in FAR 36.606. The A-E firm must be capable of responding to and working on multiple task orders concurrently. All firms responding to this announcement are cautioned to review FAR 9.5 - Organizational and Consultant Conflicts of interest; and FAR 36.209 - Construction Contracts with Architect-Engineer firms. The United States Property and Fiscal Officer (USPFO) for Rhode Island intends to award one (1) Firm Fixed-Price Architect-Engineer (A-E) Indefinite Delivery-Indefinite Quantity (IDIQ) Contract, with Options, for support of National Guard activities throughout the State of Rhode Island (RI Air National Guard/RI Army National Guard). The A-E IDIQ contract will be established for a base period of two (2) years with options exercisable for three (3) successive one (1) year option periods. A one-time minimum guaranteed amount for the contract is $2,000.00; and a cumulative $10 Million ceiling will apply for the duration of the contract. The Maximum Task Order Amount to be awarded for any single requirement is $500,000. This A-E IDIQ Contract is intended to support the USPFO for Rhode Island Multiple Award Task Order Contracts (MATOC) for Construction which have a maximum award value of $5,000,000. The average MATOC for Construction award by this agency for the previous five (5) years has been approximately $300,000.00, with a high of $1,600,000 and a low of $5,000.00. There is no minimum guarantee in the option years. Firm Fixed-Price (FFP) Task Orders are anticipated to be awarded against the A-E IDIQ contract. Large business firms that intend to be awarded a contract must convey their intent to meet the minimum small business goals on the SF 330, Section C., by identifying subcontracting opportunities with small businesses. If selected, the large business offeror will be required to submit a Small Business Subcontracting Plan in accordance with FAR 52.219-9 and DFARS 219.704/705 as a part of the Request for Proposal Package. The subcontracting plan is NOT required with the initial SF 330 submittal. The National Guard subcontracting goals are as follows: Small Business 34%; Small Disadvantaged Business 5%; Women-Owned Business 5%; HUBZone Small Business 3%; Service-Disabled Veteran-Owned Small Business 3%. The Government anticipates that this announcement will result in the award of one contract to provide services to supported locations/activities on a statewide basis. Offerors shall note that there will be no travel paid on the resulting task order unless specifically authorized by the contracting officer and only in unusual circumstances. DUTIES: Work will involve a broad variety of investigative, design and construction monitoring services (Types A, B, and C services respectively), in accordance with applicable Army, Air Force and National Guard regulations/standards for facility design and construction and miscellaneous other services which include, but are not limited to: Investigative, design and/or monitoring services for design-bid-build and criteria consultant services for design-build projects pertaining to repair, maintenance, alteration or new construction of facilities and aviation-related structures; scope development, design criteria and conceptual designs; feasibility and planning studies; field investigations; plans and specifications; historical preservation and archaeological services, studies and reports; topographic subsurface investigation and other surveys; anti-terrorism/force protection; space planning and interior design; construction cost estimating; quality control; asbestos and lead-based paint assessment and abatement; building evaluation reports; construction management; life safety studies; fire protection measures; life cycle cost analyses; landscaping design; miscellaneous design and problem analyses; independent technical review of product submittals; and on occasion, participation in peer review processes and source selection boards. Designed projects shall incorporate but are not limited to applicable sustainable design methods and practices in accordance with EPACT 2005 and ANG Sustainable Design and Development policies. DISCIPLINES: The work will require primarily architectural; mechanical, electrical, civil and structural engineering; cost estimating; and specification writing services but may also necessitate, but is not limited to geotechnical, toning/subsurface mapping, environmental, industrial hygienist, fire protection, historic preservation and archaeological monitoring, surveying, space planner/interior designer, landscape architect or designer, construction manager/inspector, USGBC LEED accredited professional, and other disciplines with specialized experience. SELECTION CRITERIA; FAR 36.602-1(a): Failure of a firm to address its specified qualifications will result in the incontrovertible determination that the submittal is non-compliant with the submission requirements. Firms will be evaluated on the following factors and A&E selection criterion, included in descending order of importance: PROFESSIONAL QUALIFICATIONS necessary for satisfactory performance of required services. Address professional qualifications by education, training, registration, certifications, overall and relevant documented specialized experience of key individuals in the discipline of Architecture; Mechanical; Civil; Electrical; and Structural. SPECIALIZED EXPERIENCE and technical competence in the type of work described in CONTRACT INFORMATION, and DUTIES above, including experience in energy-efficient products and services, products and services that utilize renewable energy technologies, waste reduction, environmentally preferable products and services and use of recovered/recycled materials CAPABILITY TO ACCOMPLISH the work in the required time. Discuss ability to meet the potential of working on multiple task orders at one time. Address your ability to sustain the loss of key personnel yet accomplish the work within required times. Address your management approach, organizational flow chart showing the inter-relationship of management and various team components, management and coordination of disciplines and subcontractors, and quality control procedures. Address capability to furnish drawings in CADD format; text documents in Microsoft Office format; and specifications/drawings as an Adobe Acrobat PDF file. PAST PERFORMANCE on contracts with government agencies and private industry in terms of cost control, quality of work and compliance with performance schedules. List but do not submit more than five (5) actual copies of recent awards, commendations or other superior performance indicators. LOCATION in the general geographical area of the projects and knowledge of the locality of the project areas in the State of Rhode Island. All contract work is to be performed within the State of Rhode Island. Address specific knowledge of Rhode Island topography and soil conditions, coastal and weather conditions and knowledge of State of Rhode Island local building codes and practices. VOLUME OF WORK performed in the previous 12 months under contracts awarded by DOD. SUBMISSION REQUIREMENTS: THIS IS NOT A REQUEST FOR PROPOSALS. Interested Architect-Engineer firms having the capabilities to perform the anticipated work are invited to submit three (3) completed and bound paper copies of their SF 330 (Parts I and II) (Architect-Engineer Qualifications). Additionally, firms may submit the data on CD/DVD but the CD/DVD shall not substitute for the hard copy submission. Submitting firms are to include the DUNS, CAGE and TIN numbers along with the name of the firm in Block 5 of the SF 330, Part I, Section B. FONT SIZE shall be at least 10 pitch or larger on white letter-sized paper (8-1/2 inches by 11 inches), limited to 20 double-sided sheets, stapled, fastened or bound. Do not furnish design portfolios, prints, magazines, newspaper clippings and/or CDs of completed projects. All requirements of this notice must be met for a firm to be considered responsive. Solicitation packages will not be provided. Qualification submissions must be received no later than 3:00 p.m., local time, on May 24 2017. Submission may be hand-carried to the Contracting Office, USPFO for Rhode Island, Camp Fogarty, Building 235, 2841 South County Trail, Route 2, East Greenwich, RI 02818 or mailed to this same address, ATTN: Mona Morin. Facsimile transmissions will not be accepted. Late proposal rules in FAR 15.208 will be followed for submissions received after 3:00:00 p.m. local time on the closing date specified in this announcement. No other general notification to firms under consideration for this project will be made. All information relating to this synopsis, including pertinent changes/amendments and information prior to the date set for receipt of AE Qualification Submission will be posted on https://www.fbo.gov. Cover letters and extraneous materials ARE NOT desired and WILL NOT be considered by the selection boards. Personal visits, for the purpose of discussing this announcement or the Submittal, will not be allowed. To be eligible for contract award, a firm must be registered in the System for Award Management (SAM). To register go to: https://www.sam.gov/portal/public/SAM/. You will need your DUNS number to register. Instructions for registering are on the web page. Firms should be registered well in advance of the closing date for submission of the SF 330 as the process may take 3 - 5 days.

Y--VA MINOR CONSTRUCTION PROJECT 640-394 PTSD EXPANSION / NEW PHARMACY

Department of Veterans Affairs, VA Northern California Health Care System | Published July 16, 2015
cpvs

Network Contracting Office 21 intends to issue an Invitation for Bid (IFB) to award a single, firm-fixed-price contract for Project 640-394, Post Traumatic Stress Disorder (PTSD) Expansion and New Pharmacy. All construction must be in strict compliance with applicable codes, VA policies and standards as to be specified in bid documents. The contractor shall provide all tools, travel, trades, labor, materials, permits, licenses and supervision for complete construction services per specifications and drawings. Project 640-394 consists of work at two different locations on the Menlo Park VA Campus. One project consists of general renovation, including interior demolition, at Building 334. The other project consists of site and utility work and new construction of a Pharmacy - new Building 360J, connected to current Building 360H. Building 334 (PTSD Expansion & renovation) consists of renovating approximately 16,500 s.f. of existing second floor interior administrative office space. The intent of this renovation project is to open up and expand the existing space to accommodate workstations, offices, conference rooms, and administrative support functions. Scope of the this renovation includes but is not limited to mechanical, electrical, plumbing, OIT, fire protection, low voltage, telecommunications infrastructure modifications and new walls, doors, flooring, lighting, ceiling, modular furnishings, interior finishes, and signage, in support of the new PTSD administrative office. The new Pharmacy (to be Building 360J) consists of site and utility work to support the proposed new 3000 s.f. +/- single story pharmacy building. Site work consists of but is not limited to grading, trenching, underground utility relocation, new utility installation, walks, fence, and landscaping. New construction consists of, but is not limited to utility infrastructure including HVAC, plumbing, fire sprinklers, low voltage, telecommunications, lighting, life safety and security systems to support pharmacy equipment and furnishings. The building structure to consist of concrete foundation and steel frame columns and roof. Exterior metal framed walls to be finished with cement plaster, windows, and door. Roofing to be single ply membrane. Existing Building 360H windows, walls, ceiling, roof, and utilities to be modified as necessary to accommodate new Building 360J. Interior features include but are not limited to a masonry vault and door, break room, storage room, mechanical room, IV room equipped with fume hood, eyewash, sink, pharmacy work area, counters, doors, pass thru window, modular storage units. The period of performance is 548 calendar days from issuance of Notice To Proceed. The solicitation, specifications and drawings will be available at www.fbo.gov. Amendments to the solicitation will also be posted on this website. All parties must obtain solicitation documents and amendments to the solicitation through this website. Hard copies will not be mailed. It is the responsibility of all bidders to frequently check the website for all notices, amendments, etc., regarding this solicitation. The Government will not be responsible for any notification not sent or received by the bidder regarding the solicitation. The contract will be awarded in accordance with the procedures specified in the solicitation. The solicitation will be issued as an IFB conducted in accordance with Federal Acquisition Regulation Part 14 - Sealed Bidding. This project is being solicited as a total-small-business-set-aside. The North American Industry Classification System (NAICS) Code for this project is 236220, with a small business size standard of $36.5 million. The Government is under no obligation to issue a solicitation as a result of this notice. No other information is available until issuance of the solicitation. The magnitude of construction is between $5,000,000 and $10,000,000. Solicitation is anticipated to be issued on or about 3 August 2015. In accordance with FAR 5.203, this notice is being published at least fifteen days before issuance of the solicitation.

General Services Administration (GSA) seeks to lease the following space: Solicitation Number: 6LA0262

General Services Administration, Public Buildings Service (PBS) | Published August 25, 2016  -  Deadline August 29, 2016
cpvs

  General Services Administration (GSA) seeks to lease the following space:   State: Louisiana City: Shreveport Delineated Area: North:  I-20 East:    Clyde Fant Memorial Parkway South:  East 70th Street / West 70th Street West:    Hearne Avenue (see delineated area map below) Minimum Sq. Ft. (ABOA): 8,970 Maximum Sq. Ft. (ABOA): 8,970 Space Type: Office Parking Spaces (Total): 20 Parking Spaces (Surface): 0 Parking Spaces (Structured): 0 Parking Spaces (Reserved): 20 Full Term: 12 Years Firm Term: 7 years Option Term: n/a Additional Requirements: The Space shall be located in a modern quality Building of sound and substantial construction with a facade of stone, marble, brick, stainless steel, aluminum or other permanent materials in good condition and acceptable to the GSA Lease Contracting Officer.  If not a new Building, the Space offered shall be in a Building that has undergone, or will complete by occupancy, modernization or adaptive reuse for the Space with modern conveniences.   Location •·         Building shall not be located in the immediate vicinity of any facilities identified as "hazardous materials transportation/storage facilities."  Examples of hazardous locations include facilities with potential environmental threats, such as fuel storage areas, gas stations, chemical manufacturing facilities, etc., as well as railroad lines transporting hazardous material.  It is preferred that the proposed building not be located near facilities such as day care centers, schools, hospitals and religious/rehabilitation/social service centers. •·         Building shall not be located near Public Defenders, Immigration and Customs Enforcement, or Probation Offices. •·         Space will not be considered where parking located under the building is open to the general public.     Building/Layout •·         Offered space must be contiguous and located on the second floor or higher; •·         All windows shall have 7mil fragment retention film; •·         One elevator shall be equipped with override control; •·         Space configuration shall be conducive to an efficient layout. Consideration for an efficient layout will include, but not be limited to, the following: size and location of interior fire (support) walls, size and number of columns, column placement, bay depths, window size and placement, convector size and placement, electrical and telephone accessibility, any angles, curves or offsets that will result in an efficient use of space. •·         The building must be able to comply with the Americans with Disabilities Act and meet certain security requirements as set forth in the Interagency Security Committee Standards and the Department of Justice Security Standards.   •·         Action: Choose whether or not a fully serviced lease is required.  Also choose 100 year floodplain unless requirement is identified by agency as a critical action. •·         Offered space must meet Government requirements for fire safety, accessibility, seismic and sustainability standards per the terms of the Lease. •·          A fully serviced lease is required.  •·         Offered space shall not be in the 100 year flood plain.    The U.S. Government currently occupies office and related space in a building under lease in Shreveport, LA that will be expiring.  The Government is considering alternative space if economically advantageous.  In making this determination, the Government, will consider, among other things, the availability of alternative space that potentially can satisfy the Government's requirements, as well as costs likely to be incurred through relocating, such as physical move costs, replication of tenant improvements and telecommunication infrastructure, and non-productive agency downtime.                           Delineated Area: To receive consideration, submitted properties must be located within the delineated area which is bounded by the following roads.  Properties fronting any of the following roads are considered to be within the delineated area.   A map of the delineated area is provided for further clarification of the boundaries:       Expression of Interest Submission Instructions/Requirements: Please provide the following basic information and descriptions pertaining to the building you propose for consideration.    All submissions should include the following information: •(1)          Name of owner; •(2)          Address or locational description of the building; •(3)          Age of building; •(4)          Total existing gross square feet of building and gross square feet per floor; •(5)          Site plan depicting the building and parking; •(6)          Floor plan and gross square feet of proposed space; •(7)          Identification of on-site parking; •(8)          A map demonstrating the building lies within the delineated area; •(9)          FEMA map evidencing that the property lies outside the 100-year floodplain; •(10)       Evidence of ownership, if building submitted by owner.  Non-Owners (e.g. brokers) must provide evidence of authority granted by property owner to submit the property; and •(11)       Any information related to title issues, easements, or restrictions on the use of the building. •(12)       A description of any planned land development or construction which will affect the building including neighboring projects and road/utility line construction.   Action: for fbo postings, insert the following language only for potential sole source succeeding lease actions.  Delete for procurement summary page. Action: For FBO postings, delete "offers due;" for procurement summary, keep "offers due" and delete "(estimated)" from dates. Expressions of Interest Due: August 29, 2016 Market Survey (Estimated): Mid-September 2016 RLP Initial Offers Due (Estimated): Mid-October 2016 Occupancy (Estimated): January  2017   Send Expressions of Interest via email to: Name/Title: Lorena Jewart, GSA Broker Representative Address: 3210 Grace Street, NW, Ste. 100 Washington, D.C. 20007 Office: 202-652-4197 Email Address: ljewart@ppwashdc.com Copying: Name/Title: Megan  Shulin, GSA Broker Representative Address: 3210 Grace Street, NW, Ste. 100 Washington, D.C. 20007 Office: 202-417-3621 Email Address: mshulin@ppwashdc.com   Government Contact Contracting Officer Representative Jaquolene Forys, General Services Administration Broker Lorena Jewart, Public Properties Megan Shulin, Public Properties  
  • 1