Call +44 800 9755 164

Public tenders for electrical in Cleveland United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

A--POWER ANALYZER

National Aeronautics and Space Administration, Glenn Research Center | Published June 12, 2015  -  Deadline May 7, 2015
cpvs

Wideband power analyzer system for the measurement of the voltage and current of electrical systems. The primay measurements well be on DC power systems and variable frequency AC electrical motor systems.

Senator Brown Office Relodcation

General Services Administration, Public Buildings Service (PBS) | Published December 5, 2014  -  Deadline December 18, 2014
cpvs

This is a non-competitive 8a Small Business Set a Side This project entails a tenant renovation and retrofit of an existing space on the 14th floor of the Stokes US Courthouse. The project includes demolition, new drywall/steel stud partitions, ceiling grid adjustments and new grid and acoustic tiles, a new kitchenette, millwork, new doors, frames, hardware (Supplied and coordinated through GSA), security (supplied and contracted through GSA and Senate Sergeant at Arms), video conferencing, telecom, power, data, new paint, carpet in select areas, carpet cleaning throughout, and renovations to the mechanical, electrical, and plumbing.

K--HYDRAULIC POWER UNIT

National Aeronautics and Space Administration, Glenn Research Center | Published July 8, 2015  -  Deadline July 22, 2015
cpvs

NASA/GRC has a requirement for a Hydraulic Power Unit meeting the following specifications: 1.0 Hydraulic Power Unit Mechanical Description: 1.1 The hydraulic power unit (HPU) can supply not less than 20 gallons per minute. In addition the HPU can include a pressure-control for operating the HPU at selectable pressures at or below 3000 psi. 1.2 The HPU can incorporate a variable displacement, pressure compensating piston pump to ensure flow meets the required demand, yet automatically reduces flow (and operating cost) when demand is low. 1.3 The HPU can operate at no more than 63 db(A) when measured at 3 feet at full pressure, fully compensated. 1.4 The HPU can incorporate a hydraulic reservoir with a capacity of not less than 90 gallons, and can be constructed of aluminum or stainless steel to eliminate the need for plating and/or painting. Thus eliminated the risk of eventual corrosion and potential flaking paint and rust chips from contaminating the hydraulic fluid. 1.5 To ensure maximum oil quality and component life, the vendor can supply the unit filled with Mobil DTE 25 hydraulic fluid (no substitutions). The power unit can be delivered with adequate fluid to fill the unit to the full level. 1.6 The reservoir can incorporate a double-sealed, valve-type drain for easy reservoir clean-out. 1.7 All high-pressure fittings can be of the o-ring face-seal type of fitting to ensure good seals to prevent leaks and drips. 1.8 The motor/pump can be mounted on vibration isolators, thus reducing vibration being transmitted to the chassis. 1.9 The electric pump motor can be liquid cooled for greater life and efficiency and operate at an efficiency level of at least 90%. 1.10 The HPU can provide a lockable enclosure for the mechanical portion of the power unit to prevent nuisance and intentional tampering. This enclosure can also accommodate easy service/maintenance access. 1.11 The HPU can provide external connections for high-pressure hydraulic fluid, return hydraulic fluid, drain hydraulic fluid and both feed and discharge cooling water. 2.1 The motor can be rated for a full 60 horsepower, continuous duty at 50/60 Hz at 380 - 460v. 2.2 The HPU can provide reduced-voltage starting Wye-Delta starter connections to limit starting in-rush current. Normal power consumption not to exceed 78 Full load amps (460v/60Hz). 2.3 All electrical controls can be mounted in NEMA and UL/ETL/CE approved enclosures. The electrical controls can include: Latching, mushroom-head Stop switch Power-on switch Power-on indicator light Off/low/high pressure control Fluid over-temperature interrupt and indicator light which shuts the system down should the fluid temperature exceed limits Low fluid-level interrupt and indicator light to shut the system down in a low hydraulic fluid level condition Indicator light to indicate when the hydraulic filter needs service An hour meter to track total running time of the HPU 2.4 To ensure operator safety, the electrical panel can include a main, lockable, electrical disconnect which also is integrated into the electrical enclosure to prevent the enclosure door from being opened while live power is on inside the panel. 2.5 The HPU can have accommodations for the following add-on options: High-pressure (3000 psi) 3 micron filtration Castor/transport trolley option Modification to air-cooling Accumulators Commoning (connecting to two power units to provide increased flow) 2.6 HPU can incorporate a control feature to enable remote: start/stop, high/low pressure and basic fault indication. 3.0 Hydraulic Power Unit Warranty 3.1 The HPU can carry a manufacturers 1-year warranty on parts and labor. NASA/GRC intends to purchase the items from MTS SYSTEMS CORPORATION, 14000 TECHNOLOGY DR, EDEN PRAIRIE, MN 55344-2247. The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact (DAVID.S.ECCLESTON@NASA.GOV ) not later than 4:30 p.m. local time on JULY 22ND, 2015. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are acceptable in response to this notice. DAVID.S.ECCLESTON@NASA.GOV 216-433-2422. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html .

ELECTRIC CIRCULATION HEATER

National Aeronautics and Space Administration, Glenn Research Center | Published June 28, 2016  -  Deadline July 8, 2016
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a (RFQ) for an Electric Circulation Heater for a 225 sq-cm Supersonic Wind Tunnel that meets the following specifications. Fluid: Dry Air Minimum flow rate: 3.2 lb. /s (11,520 lb. /hr.) Maximum flow rate: 12.9 lb. /s (46,440 lb. /hr.) Pressure drop at max. Flow rate: Inlet temperature: 70 F Outlet temperature: 80-150 ±0.25 F Inlet Pressure: 40 psig Material of construction: 304SS Insulation: Required, no type preference Process line: Pipe Process line size: 14 inch Connection type: 150 lb. flanged Heater mounting: Horizontal Installation: Indoor Installation temperature: 70-100 F Code Stamp: ASME Sec VIII Heater element controller: Silicon Controlled Rectifier (SCR) type, remote from heater by ~25 feet Process controller: Not required, controlled by facility PLC Terminal enclosure: NEMA 2, 4, or 12Available power: 480 V, 3-Phase, 60Hz.   The provisions and clauses in the RFQ are those in effect through FAC 2005 - 85.   This procurement is a total small business set-aside.   The NAICS Code and the small business size standard for this procurement are 333414/500 respectively. The offeror shall state in their offer their size status for this procurement.   All responsible sources may submit an offer which shall be considered by the agency.   Delivery to NASA Glenn Research Center, 21000 Brookpark Road, Cleveland Ohio 44135 is required. Delivery shall be FOB Destination.   All contractual and technical questions must be in writing (e-mail) to Scott Stidham not later than July 1, 2016 at NOON EST. Telephone questions will not be accepted.   Offers for the items(s) described above are due by July 8, 2016 at NOON EST to scott.e.stidham@nasa.gov and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL:http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml   Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin.   FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable.   FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13, 52.232-33 The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html   The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm    Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements: Meeting all require specifications shall also be considered It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)).   Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm. These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html.   Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).    

66--FRACTIONAL HORSEPOWER ELECTRIC MACHINES

National Aeronautics and Space Administration, Glenn Research Center | Published August 20, 2015  -  Deadline August 28, 2015
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for Dyno kit: 6 fractional horsepower electric machines. Base coupling and guard. PM Generator fitted with a 1000 line encoder. Double Fed induction Generator mounted on a bracket. In-Line torque-kit (0 to +/- 2.0 Nm) with Digital readout and RS232 data-out. Triple inverter Dyno Drive Board and Interconnecting cables. Must be safe to use in a university lab environment. Variable speed control for all machines, low voltage, fractional horsepower electric machines with different machine types, On-line class videos and notes for self-leaning and educational development. Laboratory experiments and procedures. Must be small enough to allow convenient motor testing in test cell as well as training for lab personnel. The provisions and clauses in the RFQ are those in effect through FAC 2005-83 http://nais.nasa.gov/far/ . This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 335312 / 1000 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA GLENN RESEARCH CENTER, 21000 BROOKPARK RD., CLEVELAND OHIO 44135-3191 is required. Delivery shall be FOB Destination. All contractual and technical questions must be in writing (via e-mail) to Dorothy.E.Viancourt@nasa.gov not later than noon on Aug 25, 2015. Telephone questions will not be accepted. Offers for the items(s) described above are due by noon on Aug 28, 2015 to Glenn Procurement - Dorothy.e.viancourt@nasa.gov and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.na sa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13, 52.232-33 The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements: the size of the machines, how they handle in the university and labs, training for lab personnel and their ability to have many interchangeable motors, shall also be considered. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

61--MOTORS FOR ELECTRIC AIRCRAFT TESTBED

National Aeronautics and Space Administration, Glenn Research Center | Published December 3, 2015  -  Deadline December 10, 2015
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for two (2) Motors, two (2) Controllers, two (2) Connector Kits, and two (2) Resolver Cables per the following specifications: Require motors/inverters with the following specifications: Samarium Cobalt Permanent Magnet Motors for high temperature operation 125kW continuous power for the motor and inverter 1Mb/s CAN bus communication rate Dimensions inverters must be within our envelope: 200 X 90 X 440 mm Dimensions of 125kW motors must be less than 300 mm diameter, 300 mm length Inverters and motors must be able to operate together and be tuned Speed and torque control support Must provide four quadrant support in both motors/generators and inverters/rectifiers DC link voltage between 600V and 900V Liquid cooled The provisions and clauses in the RFQ are those in effect through FAC 2005-83. This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 336412, 1,000 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA Glenn Research Center, 21000 Brookpark Rd, Cleveland OH 44135 is required. Delivery shall be FOB Destination. Offers for the items(s) described above are due by 4:00 p.m. December 10, 2015 to NASA Glenn Research Center, 21000 Brookpark Rd., Cleveland OH 44135 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.na sa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13, 52.232-33. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to Garnette Dutton@ Garnette.A.Dutton@nasa.gov not later than 4:00 p.m. on December 8, 2015. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

A--PROCUREMENT FOR 27 REWORKED AND 37 NEW TYPE T THERMOCOUPLE EXTENSION WIREBUNDLE CABLE ASSEMBLIES FOR THE SPACE POWER FACILITY SPF AT NASA PLUM BROOK STATIONSANDUSKY OH

National Aeronautics and Space Administration, Glenn Research Center | Published November 18, 2015  -  Deadline November 28, 2015
cpvs

NASA/GRC Plum Brook Station, Sandusky, Ohio, has a requirement for 27 re-worked and 37 new Type-T thermocouple extension wire bundle cable assemblies for the Space Power Facility (SPF). NASA/GRC intends to purchase the items from Douglas Electrical Components, Inc., Randolph NJ, 07869-1112. The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on November 28, 2015. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Please see attached STATEMENT of WORK. Please respond to Syreeta.J.Stewart@nasa.gov by cob, 11/28/2015. E-mails shall have this dated. Please include DUNS numbers, CAGE Codes, SAM registration.

FOUR DIGITAL TEMPERATURE SCANNERS

National Aeronautics and Space Administration, Glenn Research Center | Published December 28, 2015  -  Deadline December 29, 2015
cpvs

Specifications: 4 Digital Temperature Scanners (DTS): Model DTS4050/64Tx made by Scanivalve along with the matching Power Supplies and Power/Ethernet cables (Power cable #155819-1 for PDM3200 - 10 ft. long, Ethernet cable #156100-1 - 10 ft. long, Power Distribution module #PDM3200 for up to 4 each DTS modules). With screw terminal inputs. This is an item that reads thermocouple inputs from the field and outputs the temperature reading to the data system via Ethernet, eliminating the need for Analog to Digital Converters on the data system. Each unit has 64 channels that are capable of outputting values in Degrees Celsius, Degrees Fahrenheit, Degrees Rankine, Degrees Kelvin, Millivolts, or Counts with inputs from Type-E, J, K, N, R, S, T, and B Thermocouples. The accuracy of the unit is +/- 0.5 Degrees Celsius and was designed to operate in rugged environments with high levels of electrical noise and vibration. This is a replacement of the existing 1970's vintage thermocouple oven in the Propulsion Systems Laboratory. Scanner model number DTS4050/64Tx - must be exact.

Z--CENTRAL-PROCESS RECERTIFICATION OPERATIONS AND MAINTENANCE

National Aeronautics and Space Administration, Glenn Research Center | Published February 6, 2015
cpvs

NASA Glenn Research Center (GRC) plans to issue a Draft Request For Proposal (DRFP) for Central-Process Recertification, Operations and Maintenance (CROM) Support Services including: Contract Management (including program management, business functions, work control functions, safety, health & environmental functions, etc.) for both Base and Indefinite Delivery Indefinite Quantity (IDIQ) Work includes: Base Work Scope * Minor Repairs, Maintenance and Operations of: GRC Lewis Field Central Process Systems. GRC Lewis Field & PBS Cryogenic Systems. * Minor Repairs, Maintenance of: GRC Lewis Field High Voltage Electrical System Controls. * Certification services for: GRC Lewis Field & Plumbrook Station Pressurized Vessels & Systems. * Minor Design modifications and analysis for: GRC Lewis Field & Plumbrook Station Pressurized Vessels & Systems. * All technical staff to support the functions listed above. IDIQ * Major Repairs and Upgrades to: GRC Lewis Field Central Process Systems. GRC Lewis Field and Plumbrook Station Cryogenic Systems. GRC Lewis Field High Voltage Electrical System Controls systems. * Major finite element analysis, flexibility analysis and design for hardware modifications for: GRC Lewis Field and Plumbrook Station Pressurized Vessels & Systems. * All technical staff to support the functions listed above. The latest version of the Draft Statement of Work will be uploaded for review. The Government anticipates the award of a single COST PLUS FIXED-FEE contract for the required services. The North American Industry Classification System (NAICS) Code is 561210 (Facilities Support Services) with Small Business Size Standard of $38.5 million in a three-year average annual receipts for determining whether or not a business is small. This procurement is a 100% total small business set-aside. Technical and Procurement Questions shall be directed to Eunice Adams-Sipp via e-mail: Eunice.J.Adams-Sipp@nasa.gov ***The Government will host an Industry Day for this procurement on Monday, February 23, 2015. Additional information and instructions will be uploaded in the very near future.*** The Government does not intend to acquire a commercial item using FAR Part 12. All qualified responsible sources may submit an offer which shall be considered by the agency. An Ombudsman has been appointed. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . The firm date for proposal submittal will be stated in the Final Request for Proposal. The solicitation and any documents related to this procurement will be available over the Internet. These documents will reside on a World Wide Web (WWW) server, which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA Business Opportunities home page is http://procurement.na sa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin= . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the Internet site for the release of the solicitation and amendments (if any). This announcement serves as Advance Notice for this procurement. The Government will not provide written paper copies of the solicitation package or any written paper copies of the amendments. Telephone, written, facsimile, or e-mail requests for the solicitation package will not be honored. Potential offerors will be responsible for downloading their own copy of the solicitation and amendments (if any). Potential Offerors MUST register on FedBizOpps at www.fbo.gov/ in order to receive notification(s) and/or changes to the solicitation. Amendments will be available from the FedBizOpps website by download only. Potential Offerors are responsible for obtaining and acknowledging all amendments to this solicitation prior to the due date and time for receipt of proposals. Contractors will be required to register with the System for Award Management (SAM) at: http://www.sam.gov All contractual technical questions must be submitted in writing via e-mail. Telephone questions will not be accepted.

66--REPLACEMENT LOAD CELLS

National Aeronautics and Space Administration, Glenn Research Center | Published March 27, 2015  -  Deadline April 6, 2015
cpvs

NASA/GRC has a requirement for Qty 6, Force Measurement Systems Model BUL-MM69-OD-4K-89-193 load cells and Qty 10, Force Measurement Systems Model BUL-MM69-OD-2K-89-193 load cells. NASA/GRC intends to purchase the items from Force Measurement Systems, Fullerton, CA for the following reasons: These load cells are a DIRECT replacement to the current Force Measurement Systems load cells installed in the NASA/GRC 6 axis thrust stand. The thrust stand was designed and built around the current Force Measurement Systems load cells. The sensitivity of 6mV/V is required to achieve research's desired signal to noise ratio and resolution. This model of load cell is the only load cell that will fit with our flexures and associated mounting hardware and in the footprint required. Existing electrical connectors and pin outs match our current cabling. The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on 4/3/2015. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html .

70--SERVER AND INSTALLATION

Department of Veterans Affairs, Brecksville (Cleveland) VAMC | Published April 8, 2015  -  Deadline April 22, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is VA250-15-Q-0234 and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-80. The requirement is for Brand Name for Equal Server and Installation, see Statement of Work below. Delivery location is Cleveland VAMC in Cleveland, Ohio. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-80. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/Far/ The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors -Commercial Items, FAR 52.212-3, Offeror Representations and Certifications-Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications or confirm that the annual representations and certifications was completed electronically via the SAM website accessed through http://www.acquisition.gov; FAR 52.212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.204-10, 52.209-6, 52.219-6, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.223-18, 52.225-1, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The following VAAR Clause applies 852.203-70 Commercial Advertising 852.232-72 Electronic submission of payment requests 852.246-70 Guarantee 852.246-71 Inspection Quotes are to be emailed to Rachelle Hamer at Rachelle.hamer@va.gov no later than Wednesday, April 22, 2015 by 5pm EST. STATEMENT OF WORK (SOW) A required walk through will be available and required on Thursday, April 16, 2015 at 11am. The walk through will take place at the EUL Admin Building, 1620 East 105th Street, Cleveland, Ohio 44106, meeting in the reception area. Your guide will be someone from the Engineering Department and Rachelle Hamer, Contracting Specialist (216) 482-4182. Please no calls before or after the survey. 1. Contract Title. Engineering Server and Storage Array 2. Background. The Louis Stokes VA Electrical Shop would like to request a Turnkey Installation of a New Dell R620 Server, MD1200 Storage Array & Lenel OnGuard Server Software in to the existing VAPD Server racks at the EUL Bldg, 1620 East 105th Street, Cleveland, Ohio 44106 for engineering security. 3. Scope. At the current time there is not space on the existing servers to allow engineering to move forward with their security plan. The electrical shop would like to add security cameras and card swipes to vital areas of engineering including the generator room, Russell gear room, Medium Voltage room, Energy Center and many other high risk areas. At the present time there is limited security in the engineering areas allowing easy to access these rooms with a key. This will allow for safer working environment for the facility staff. This Scope of Work is considered a turnkey project. All cables are to be marked on both ends at or near the termination point so as to be easily traced in the future. All cables are to be labeled with Brady wire labels or equal. Provide a cable schedule and drawing for all new cables that pertain to the project. All cables and wiring are to be installed in conduit or cable tray. No bridal rings or open wiring will be permitted. Include all wiring, materials and labor needed to produce the results stated in the scope of work. Any and all additional control, feeder and modification to existing wiring will be included in the scope of work. No additional cost to the VA will be allowed due to miscalculations or under estimating by the contractor. Upon completion electric shop is to work in conjunction with the vendor to ensure all devices installed are functioning correctly to the scope of work. 4. Parts and Material. 1 Each- OnGuard Video Security Server Software License on CD include this part number if you want stand-alone video system. Includes OnGuard digital video server software license, system administration for video, communication server for video, alarm monitoring for video, a single OnGuard digital video client license, flexnet soft key and first year support plan SUSP-W-VO. 1 Each- OnGuard Digital Video Enabler. This option should be included if you already have purchased an OnGuard Access Control system and wish to turn on digital video. This license activates the digital video tab to show up in OnGuard so you can use IP - Analog or hybrid recorders and cameras in OnGuard. Also increments SWC-DVxxx license by 1 giving you 1 client of Digital Video included. 1 Each- Dell Power Edge R620 Dual Xeon E5-2667 2.90Ghz 15M Cache, 2x 8GB RDIMM RAM, RAID 1 Dual 146Gb SAS HDD, DVD+/-RW, SATA Drive, Ready Rack Rails, Dual Hot-Pug Redundant Power Supply 750W, Windows Server 2008 R2 SP1, Quad Port 1 GB NIC, 3 Year Pro Support & Mission Critical 4 Hr 7x24, PERC H710 Integrated RAID Controller. 1 Each- Dell Power Vault MD1200 12 Bay Rack mount, PERC H800 SAS, 12x 2TB 7.2K RPM Near-Line SAS 6Gbps 3.5in Hot-Plug HDD, Rapid Rails w/Cable Mang., 4Yr Pro Support NEMA 5-15P to C13 Wall Plug 125V 15A 10' Cord Device & Head End Hardware Systems Programming, Adjustments & Testing Shipping & Handling 1 Yr. Warranty Materials & Workmanship or better Warranty Period The vendor will warranty in full labor and material for one year. All cables are to be marked on both ends at or near the termination point so as to be easily traced in the future. All cables are to be labeled with Brady wire labels or equal. Provide a cable schedule and drawing for all new cables that pertain to the project. All cables and wiring are to be installed in conduit or cable tray. No bridal rings or open wiring will be permitted. Include all wiring, materials and labor needed to produce the results stated in the scope of work. Any and all additional control, feeder and modification to existing wiring will be included in the scope of work. No additional cost to the VA will be allowed due to miscalculations or under estimating by the contractor. Upon completion electric shop is to work in conjunction with the vendor to ensure all devices installed are functioning correctly to the scope of work. 5. Performance Monitoring. 5.1 Contractor is to notify the electrical shop, nursing supervisor or charge nurse when they start in the morning and when they are finished at the end of the day. Contractor must keep the electrical shop and nursing supervisor informed on his decisions pertaining to the job. If nursing supervisor or electric shop request vendor to discontinue work for the day vendor must comply. Electrical shop will be notified immediately if there is a work stoppage. Vendor must keep in mind that this is a patient ward and no tools or carts can be left unattended. 5.2 Smoking and consumption of Alcohol on VA property: No smoking in any building on station. Provide contractors with a copy of Medical Center Policy 138-060. Mechanical rooms and contractor occupied areas are no exception. Also, contractors are NOT allowed to bring alcohol on to government property. Those who violate this policy can face up to a $300 fine. 5.3 Professional Behavior: Please remind all staff and subcontractors that they are working in an active medical center environment, and professional behavior is expected at all times. Since work is sometimes performed directly adjacent to active offices or patient care areas, please be cognizant of excessive noise and disruptions to those nearby (radios too loud, use of foul/inappropriate language, etc.) 6. Security Requirements. 6.1 All doors must remain closed and secure at all times. Propping doors open will not be tolerated. 6.2 Contractor is also responsible for security badges of all contractor/subcontractor personnel. Every worker must have a badge and form of identification when working on VA property, and is subject to VA security checks and enforcement actions while working on VA property. ? 7. Other Pertinent Information or Special Considerations. 7.1 Use of Existing VA Canteen: Contractors may use VA canteen for purchasing food so long as they have appropriate ID badge on and their clothes and footwear are free of excess dirt and debris. 7.2 Above Ceiling Work Permits: Contractor shall request and follow all provisions of approved permit(s) while working in the Medical Center. Working outside of construction barriers without having approved permit with construction personnel is cause for immediate cessation of work by the COTR/ACO. 7.3 Lock Out/Tag Out Energy Control Program shall be observed by all contractor personnel. Contractor is to submit a copy of their policy for approval. Provide contractors with copy of Medical Center Lock Out/Tag Out Policy 138-031. 7.4 All cables are to be marked on both ends at or near the termination point so as to be easily traced in the future. All cables are to be labeled with Brady wire labels or equal. Provide a cable schedule and drawing for all new cables that pertain to the project. All cables and wiring are to be installed in conduit or cable tray. No bridal rings or open wiring will be permitted. 7.5 Include all wiring, materials and labor needed to produce the results stated in the scope of work. Any and all additional control, feeder and modification to existing wiring will be included in the scope of work. No additional cost to the VA will be allowed due to miscalculations or under estimating by the contractor. All conduit and cable tray raceways are to be provided by the contractor. 7.6 Upon completion electric shop is to work in conjunction with the vendor to ensure all devices installed are functioning correctly to the scope of work. 7.7 A site visit is a must by the contractors before signing a contract with the VA to do what is stated in the scope of work. All work will be completed 90 days from the day the contract is signed. The quote will include all labor, material, equipment, freight charges, and testing to produce the end results described but not limited to the scope of work. 7.8 Shut downs will be scheduled with the VA. Shut downs are on Sundays at 6am start time. Normal work hours are 7am to 3:30pm. Off hours can be coordinated with VA to meet schedules. 7.9 When the scope of work is completed the vendors will give VA Electric Shop (W) employees 4 hours training on the equipment, operation and a briefing on how the equipment was installed. Any special tools, drawings needed to replace equipment or parts will be supplied to the Electric Shop (W) upon completion of the scope of work. 7.10 A required walk through will be available and required on Thursday, April 16, 2015 at 11am. The walk through will take place at the EUL Admin Building, 1620 East 105th Street, Cleveland, Ohio 44106, meeting in the reception area. Your guide will be someone from the Engineering Department and Rachelle Hamer, Contracting Specialist (216) 482-4182. Please no calls before or after the survey. 7.11 When the scope of work is completed the vendors will give VA Electric Shop (W) employees 4 hours training on the equipment, operation and a briefing on how the equipment was installed. Any special tools, drawings needed to replace equipment or parts will be supplied to the Electric Shop (W) upon completion of the scope of work. 8. Place of Performance. EUL Bldg. 1620 East 105th Street Cleveland, Ohio 44106 9. Period of Performance. The contractor has 30 days from award to start the project and 90 days to complete this project. 10. Hours of Operation. Shut downs will be scheduled with the VA. Shut downs are on Sundays at 6am start time. Normal work hours are 7am to 3:30pm. Off hours can be coordinated with VA to meet schedules. The Government observes the following holidays: New Year's Day Dr. Martin Luther King Jr. Day President Day Memorial Day Independence Day Labor Day Columbus Day Veterans Day Thanksgiving Day Christmas Day If a holiday falls on Sunday, the following Monday will be observed as the National Holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a National Holiday by the U.S. Government agencies. Also included would be any day specifically declared by the President of the United States of America as a National Holiday. 11. Evaluation Factors. Price Past Performance; vendors must give at least 3 references to check on and PPIRS will be checked. Technical; Delivery, Include best delivery date; and All technicians must be Lenel Master and Dell Certified. A certificate must be presented with the quote. ? B.1 Price/Cost Schedule Item Information ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 1 Turnkey Installation of a New Dell R620 Server, MD1200 Storage Array & Lenel OnGuard Server Software into the existing VAPD Server racks at the EUL Bldg for engineering dept. 1.00 JB __________________ __________________ GRAND TOTAL __________________

66--120 KN CAPACITY HYDRAULIC GRIPPING SYSTEM

National Aeronautics and Space Administration, Glenn Research Center | Published July 31, 2015  -  Deadline August 6, 2015
cpvs

NASA/GRC has a requirement for a new 120 kN Capacity Hydraulic Gripping System for multi-functional mechanical testing of flat specimens in an existing MTS Systems Corp. Insight 50 load frame. Grips: Gripping System shall include 2 (two) each hydraulic wedge grips with flat specimen side loading capability. Minimum static force capability shall be 120 kN, and minimum dynamic force capability shall be 100 kN. Minimum operating temperature range shall be 0 degrees C to 170 degrees C. Interface to the MTS Insight 50 load frame shall be by MTS M27 x 2 mm high strength threaded rod fastener; all adapters and locking wedge washers shall be provided to enable preloading and locking at the full rated axial value. The grips shall be pre-lubricated and ready for immediate use. Hydraulic Supply: Gripping System shall include a self-contained hydraulic pumping and control system to simultaneously operate each grip to its fully open and closed position. Supplied pressure shall be sufficient to clamp test specimens for the full rated value of the hydraulic wedge grips. Hydraulic hoses and fittings shall be provided for connection of the pump system to the wedge grips. Hydraulic supply shall permit operation of grips over the minimum operating temperature range of 0 degrees C to 170 degrees C. Electrical power requirement shall be wall power at 100 to 115 VAC, 60 Hz. Grip Wedges: Gripping System shall include grip wedges for each wedge grip to interface to flat test specimens with a range of thicknesses from 0 mm to 19 mm. Gripping surfaces of all grip wedges shall be treated for permanent high friction contact to enable force transfer of at 100 kN. Grip wedges shall be pre-plumbed for water-cooling. Minimum operating temperature range shall be 0 degrees C to 170 degrees C. Water Cooling: A water manifold with metering valves shall be provided for routing of chilled water to the grip wedges. Fittings and a minimum of 12 feet of hose shall be provided. Functional and Performance Test: The Government (or the Supplier, at the Suppliers option) will install the 120 kN Capacity Hydraulic Gripping System and perform a functional test to assure that full actuation of the grips is achieved with continuous smooth operation, and that no leaking of hydraulic fluid or water occurs throughout the full range of the rated hydraulic pressure. If this is not achieved, the Supplier shall replace or repair the Gripping System at no additional charge to the Government. Warranty: The Supplier shall warrant the 120 kN Capacity Hydraulic Gripping System to be free from defects in materials and workmanship for at least 1 (one) year after shipment to the Government. Manuals: The Supplier shall provide Installation and Operation manuals for the 120 kN Capacity Hydraulic Gripping System in hardcopy or digital format. Shipment: The Supplier shall ship and deliver the 120 kN Capacity Hydraulic Gripping System to the Government at the following address: NASA Glenn Research Center Attn: Receiving MS: 152-1 21000 Brookpark Road Cleveland, OH 44135 The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. The Sole Source is under th authority of FAR Reference 13.106-1(b)1. NASA/GRC intends to purchase the items from MTS Systems Corp. Due to the proprietary nature of the equipment, hardware, fastener system, and specifications, this procurement is a sole source. The Government intends to acquire a commercial item using FAR Part 12. Oral communications are NOT acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html .

MINIATURE PRESSURE SCANNER

National Aeronautics and Space Administration, Glenn Research Center | Published July 18, 2016  -  Deadline August 1, 2016
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for 2 each of a Miniature Pressure Scanner (Normal Px), part number: MPS4264/64NPx-15psid 64-channel or equal; 1 each Miniature Pressure Scanner (Normal Px), part number: MPS4264/64NPx-30psid 64-channel or equal; 3 each MPS Power Supply, 5-port, part number: 70450-1 or equal; 3 each MPS Power/Serial Trigger Cable, 10 ft long, part number: 156085-1 or equal; 3 each MPS Ethernet Cable, 10 ft long, part number 156062-1 or equal; 1 each Power Distribution Unit, part number PDM3200 or equal; and 3 each Power Cable (PDM3200-DTS), 10 ft long, part number 155819-1 or equal.High Accuracy Miniature Pressure Scanner Specifications are as follows:1.1 General specifications:1.1.1 Pressure Range: 15 and 30 PSID modules are required1.1.2 Accuracy: ≤ ± 0.06 % of full scale1.1.3 Overpressure capability: ≥ 2x full scale pressure1.1.4 Maximum reference pressure : ≥ 30 PSIG1.1.5 Maximum operating temperature: ≥ 60 °C1.1.6 Minimum operating temperature: ≤ 0 °C1.1.7 Media: Air1.1.8 Number of pressure channels: 641.1.9 Required control pressure: ≤ 120 PSIG1.1.10 Must have self-calibrating capability1.1.11 Must have removable pneumatic connectors1.2 Electrical/data specifications:1.2.1 Input power: 9-36 VDC, nominal 1.2.2 Must support external data trigger1.2.3 A/D resolution: ≥ 24 bit1.2.4 Ethernet connection : 100 Base T1.2.5 Data output rate: ≥ 850 (samples/channel/sec)1.2.6 Must support standard communication protocols1.2.7 Must support web browser interface to change settings and scan data1.2.8 Must support LabVIEW and other common DAQ/HMI software1.2.9 Must support IEEE-1588v2 Precision Time ProtocolThe provisions and clauses in the RFQ are those in effect through FAC 2005-89/07-14-16. This procurement is a total small business set-aside.  The NAICS Code and the small business size standard for this procurement are 334513/750 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, Ohio 44135 is required within 14 weeks ARO. Delivery shall be FOB Destination. Offers for the items described above are due by 4:30 pm 08/01/16 to NASA/Glenn Research Center, Attn: Nancy Shumaker (MS: 60-1), 21000 Brookpark Road, Cleveland, OH 44135 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-6, 52.219-4, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-1, 52-225-13, and 52.232-33. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to Nancy Shumaker not later than 07/28/16. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements such as Delivery, Maintenance, etc shall also be considered.  It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm. These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html. Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).      

66--FIELD PROGRAMMABLE GATE ARRAY BOARD

National Aeronautics and Space Administration, Glenn Research Center | Published March 25, 2015  -  Deadline April 8, 2015
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotation (RFQ) for 2 each of a Field Programmable Gate Array Board Model Number: ADA-VPX3-6T1-LX550T-2/2CCE, Part Description: Virtex-6 FPGA Board 3U VPX, Conduction Cooled, or equal; 2 each of a Model Number: ADC-VPX3-XMC-RTM, Part Description: Rear Transition Module for FPGA Board, or equal; 2 each of a Model Number: XRM2-FCN, Part Description: Front Panel Adapter with RocketIO via FCN Connector, or equal; and 2 each of a Model Number: AD-JTAG-6T1, Part Description: Adapter Card AD01237-1, or equal in accordance with the following specifications: Mechanical Specifications: Each FPGA board SHALL abide by the following constraints: 3U VPX Conduction Cooled 1 inch pitch Operating Temperature: 0 to 70C Humidity: up to 95%, non-condensing Electrical Specifications: Each FPGA board SHALL abide by the following constraints: Xilinx Virtex-6-LX550T, FPGA (level 2 speed) PCIe Generation 2 x4 Fat Pipe Host Interface PCI express Generation2 link to separate bridge. 4 DMA controllers The Memory SHALL be the following: - DDR3 SDRAM: Four (4) of 512 Mbytes per bank 2 GBytes total for the board - Flash Configuration flash The Front I/O SHALL have the following: - 146 LVCMOS/LDVS I/O - Programmable signaling levels of 1.5V, 1.8V, or 2.5V 8 High speed serial links The Rear I/O SHALL have the following on P1: - One (1) PCIe data plane - Two (2) expansion planes - Two (2) 100Base-BX control planes - Eight (8) GPIO The Rear I/O SHALL have the following on P2: -Sixty-four (64) I/O Compliant with VITA The Clocks SHALL have the following: - 250MHz reference clock with low jitter - 200 MHz reference clock for IOB - Custom clock input capability. Device configuration capability SHALL be the following: - PCI express direct to SelectMAP port - From flash direct on power up. - External JTAG connector Linux driver support Support RTM module with the following: - Two 10/100/1000BASE-T Ethernet Ports - RS-232 Ports Support for Front End connector: - Octal high speed serial links via FCN connector - Supplied with sample UCF and HDL files - Operating temperature 0 to 55C The provisions and clauses in the RFQ are those in effect through FAC 2005-80. This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 334111/1000 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA/Glenn Research Center, 21000 Brookpark Road is required within 12 weeks ARO. Offers for the items(s) described above are due by 4:00 pm April 7, 2015 to NASA/Glenn Research Center, Attn: Nancy Shumaker (MS: 60-1), 21000 Brookpark Road Cleveland, OH 44135 and must include, solicitation number, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors shall provide the information required by FAR 52.212-1 (JUL 2013), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (SEP 2013), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (SEP 2013), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204.10, 52.209-6, 52.209-10, 52.219-4, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-36, 52.223-18, 52.225-1, 52.225-13, and 52.232.33 The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to Nancy Shumaker not later than April 7, 2015. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements such as Delivery shall also be considered. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (AUG 2013), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

A--SINGLE BOARD COMPUTER WITH LINUX BOARD SUPPORT PACKAGE

National Aeronautics and Space Administration, Glenn Research Center | Published May 7, 2015  -  Deadline May 19, 2015
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for a Single Board Computer with a Linux Board Support Package. Minimum Technical Specifications Mechanical Specifications: 1. The SBC SHALL abide by the following constraints: 3U VPX-REDI Conduction-Cooled form factor 1 inch pitch with solder-side cover Operating Temperature: -40 to +85C (Board Rail Surface) Vibration: 0.1 g2/Hz (maximum), 5 to 2000 Hz Shock: 40 g, 11 ms sawtooth Humidity: 0% to 95% non-condensing 2. The RTM SHALL abide by the following constraints: 3U VPX RTM (VITA 46.10) form factor Dimensions: 100 mm x 85.5 mm 1 in. pitch Operating Temperature: 0 - +55C ambient Vibration: 0.002 g2/Hz, 5 to 2000 Hz 20 g, 11 ms sawtooth 0% to 95% non-condensing Electrical Specifications: 1. The SBC SHALL abide by the following constraints: SHALL have the following processor features: o 4th generation Intel Core i7 o Integrated high-performance 3D graphics controller SHALL have the following Memory: o 16GB of DDR3 ECC SDRAM on two (2) channels o 32 GB of NAND flash o 64 MB NOR boot flash o 64 kB EEPROM SHALL have the following VPX (VITA 46) P0 I/O: o I2C Port SHALL have the following VPX (VITA 46) P1 I/O: o X4 PCI Express Fat Pipe Interface to P1.A o X4 PCI Express Fat Pipe Interface to P1.B o Two (2) 1000Base-BX Gigabit Ethernet ports. o XMC P16 I/O mapping P1w9-X12d per VITA 46.9 SHALL have the following VPX (VITA 46) P2 I/O: o Two (2) 10/100/1000BASE-T Gigabit Ethernet ports o Four (4) SATA ports o Two (2) USB 2.0 ports o Two (2) HDMI/DVI-D or Dual-Mode DisplayPort interfaces o Up to two (2) RS-232/422/485 serial ports o 3.3 V GPIO signals 2. The RTM SHALL abide by the following constraints: SHALL have the following back panel I/O: o Two (2) RJ-45 connectors for dual 10/100/1000BASE-T ports o One (1) micro DB-9 for dual serial ports o One (1) USB connector o Two (2) eSATA connectors o One (1) mini DisplayPort connector SHALL have the following internal I/O: o One (1) USB connector o Two (2) SATA connectors o One (1) DisplayPort connector o GPIO header Software Specifications: The SBC manufacturer SHALL provide a Linux based board support package providing all necessary drivers to interface to the SBC components. The board support package shall be based on Linux kernel 3.10.6 or newer. The provisions and clauses in the RFQ are those in effect through FAC _2005 05-81. This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 334111, 500 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135-3191. Delivery shall be FOB Destination. Offers for the items(s) described above are due by May 19, 2015 to NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135-3191 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.na sa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13,52.232-33. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.htm l The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/o ffice/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing e-mail to Sandra Gerlach not later than May 15, 2015. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http: //farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm . These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi- bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).

Dual Source Laser Cutter

National Aeronautics and Space Administration, Glenn Research Center | Published June 20, 2016  -  Deadline June 30, 2016
cpvs

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for a Dual Source Laser Cutter: 75 Watt C02 Laser/30 Watt Fiber Laser.Meets the following specifications: Specifications/Minimum Requirements Dual Source Laser Cutter withAt least 30 Watt Ytterbium Fiber Laser TubeAt least 75 Watt CO2 Laser TubeAbility to switch between CO2 and fiber laser sources without tools, optic changes, or software reconfiguration. At least 32" x 18" Active Engraving and Cutting AreaVector Cutting Grid / Downdraft Cutting TableComplete filtration system, requiring no ventilationFilters for 500 hours of operation Rotary attachment Internal lightingAir Assist Optics Protection (including compressor)Red Dot PointerElectrical requirements: 110V PowerInstallation and on-site trainingBumper-to-Bumper Warranty (at least 1 year)   The provisions and clauses in the RFQ are those in effect through FAC _2005_-_88_ . This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 423830, 500 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA Glenn Research Center 21000 Brookpark Road, Cleveland, Ohio 44135 is required. Delivery shall be FOB Destination. Offers for the items(s) described above are due by June 30, 2016 to Sandra.L.Gerlach@nasa.gov at noon, and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL:http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml Offerors shall provide the information required by FAR 52.212-1 (APR 2014), Instructions to Offerors-Commercial Items, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (DEC 2014), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAR 2015), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13, 52.232-33. The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm   All contractual and technical questions must be in writing (e-mail) to Sandra L Gerlach not later than June 27, 2016. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements: Must meet all specification such as Delivery, Maintenance, etc shall also be considered It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3 (MAR 2015), Offeror Representations and Certifications - Commercial Items with their offer. The provision may be obtained via the internet at URL: http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm. These representations and certifications will be incorporated by reference in any resultant contract. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html. Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/nais/link_syp.cgi . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).
  • 1