COMPREHENSIVE MODERNIZATION OF SOUND.
| Published June 9, 2014 - Deadline June 17, 2014
The contract is for delivery to the premises of the Purchaser complete and consistent, in terms of selected devices, a new set of electroacoustic sound along with the necessary enclosures that aggregate the individual parts of the system and installation, commissioning and tuning of the supplied equipment (including measurements and sound design, sound set, with hooks peripherals, power amplifiers, stage monitors) as well as the construction of a new, separate from the internal electrical power line building for the sound system tailored to the needs of the new system. New installation of electric power system operation must ensure sound without interference, hum, etc. After installation, tuning and commissioning sound system Contractor shall ensure that the system after installation constituted a coherent whole, will make the final presentation of your system and provide training for persons appointed by the Employer to operate and develop the instruction manual for the system. List of services and devices that make up the subject of the contract contains a detailed description of the contract. Purchase of the equipment offered must be done through the official channels of sales of the manufacturer of your product, operating in the European Union. By the term should be understood new equipment produced in 2013 or 2014 do not have a constituent that is compatible for use with factory specifications not subjected to modifications without completed repairs, traces of an earlier building or use, delivered in original packaging with intact seal the factory if any. By the term should be understood professional equipment dedicated to the operation characteristic of mass events inside and outside the building, having no restrictions manufacturer in the operation of the sound stage sets or entertainer. By the term should be understood equivalent equipment that meets the minimum requirements and specifications indicated in the tender documents. The supplied equipment must be selected in a manner appropriate for compatibility with other devices and must meet the requirements of devices in the European Union (min. have the necessary certificates, including a certificate of safety, technical certificates, declarations of conformity, Polish standards). This excludes the possibility of offering sets matched against the recommendations of manufacturers of various components of the system. The Employer requires a minimum of audio connections in the standard second class IPC/WHMA-A-620. WARRANTY CONDITIONS: Minimum two years warranty on every available device, and a minimum of two years warranty on assembled, running and tuned complete sound system which is the subject of the contract. The Contractor shall provide warranty service under the authorization granted by the manufacturer of the product offered, to conduct warranty and post-warranty service within the European Union. Warranty repairs must be carried out on the site authorized by the manufacturer of the equipment offered. Is not allowed to offer different warranty periods for different elements of the contract and for a set of orders as well as exclusions from warranty on component parts of devices. For a limited warranty on any part of the contract the Contractor shall provide a total guarantee for the period included in the offer. SERVICE: The Employer will provide the warranty period to adopt any part of the order under the warranty service, door-to-door, with the adoption of an object must occur in not more than 48 hours from the date of notification of the fault or defect item. When servicing require repair time over 48 hours of admission subject Contractor shall provide at its own expense a replacement for the repair time of not worse performance on the subject of the order adopted in the framework of the site. The Contractor shall provide transportation of equipment covered by the contract within the service ..