Public tenders for led in Susquehanna-avenue-aberdeen-proving-ground-md United States

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!
ElectricalledUnited Statessusquehanna-avenue-aberdeen-proving-ground-md

EXTERIOR LED LIGHTING UPGRADE

Department of Agriculture, Agricultural Research Service | Published April 19, 2017  -  Deadline May 2, 2017
cpvs

The USDA-Agricultural Research Service, Pacific West Area, has a requirement for "Exterior LED Lighting Upgrade," at its Aberdeen, Idaho location.Requirement Description: The work includes but is not limited to these principal features of work: Replace Existing HID lighting system in parking lot and sidewalk areas around facility and replace with an energy efficient, cost effective and reliable LED Lighting System. Project will be accomplished by retrofitting the existing fixtures with LED Lamps or replacing complete fixtures as indicated in the Statement of Work. (See the attached Statement of Work for the complete requirement).Solicitation #AG-0202-S-17-0001 is issued as a request for quotation (RFQ). The solicitation document, with the attached clauses and provisions, is issued in accordance with the Federal Acquisition Regulation (FAR) and will be incorporated in the awarded firm-fixed price purchase order. Interested vendors should reference the solicitation documents for all terms and conditions. As authorized by FAR 5.102, solicitation is limited to electronic medium, and the USDA ARS will provide no hard copies. The solicitation, consisting of various documents, specifications, forms, and drawings will only be available for download at no charge at the Federal Business Opportunities (FBO) website (http://www.fbo.gov). All responsible sources may submit a response which, if timely received, must be considered by the agency. All interested offerors (prime contractors & subcontractors) should register at www.fedbizopps.gov so that others will know of your interest in participating in this procurement. A Bidder's List WILL NOT be prepared nor distributed by the Contracting Officer. All interested parties are responsible for monitoring this website to ensure they have the most current information (i.e. Amendments) for the solicitation. Contractor must be registered at SAM.gov (System for Award Management) at https://www.sam.gov/portal/public/SAM/ prior to award. Notice of Set-Aside for Small Business Concerns: This requirement is a Total Small Business Set Aside. NAICS: The associated North American Industrial Classification System (NAICS) code for this procurement is 238210 Electrical Contractors and Other Wiring Installation Contractors, with a small business size standard of $14.0 million. The project magnitude of this construction project is less than $25,000.00. Site Visit: A Site Visit will be conducted at USDA-ARS, 1691 S 2700 W, Aberdeen, ID 83210, on Thursday, April 27, 2017 at 10:00 am Mountain Daylight Time (MDT).The site visit will be held for the purpose of providing contractors with the opportunity to familiarize themselves with the site which may be helpful in the preparation of offers. Attendance at this site visit is not mandatory for offer submission. However, failure to visit the site will not relieve or mitigate the successful contractor's responsibility and obligation to fully comply with the terms, conditions, and specifications contained and/ or referenced in this document. Period of Performance: Deliver 120 days from Notice to Proceed to USDA-ARS, 1691 S 2700 W, Aberdeen, ID 83210. Biobased Products: This procurement requires the use of Biobased products to the extent that such products are reasonably available, meet agency or relevant industry performance standards, and are reasonably priced. The products should first be acquired from the USDA designated products categories. All supplies and materials shall be of a type and quantity that conform to applicable Federal specifications and standards, and to the extent feasible and reasonable; include the exclusive use of biobased and recycled products. Please visit www.biopreferred.gov for more information on the USDA Biobased Program and to reference the catalog of mandatory biobased products. Buy American Act: The contractor shall use only domestic construction materials in construction contracts performed in the United States in accordance with FAR.201 and that meet FAR 52.225-9 and 52.225-10 Notice of Buy American Act-Construction Materials. Quote Submission Instructions: 1. Read the solicitation in its entirety (including the Statement of Work and all other documents). Construction Clauses are attached. 2. The quote should include offeror's proposed delivery schedule (in days after award) as part of their quotation and be included with the bid schedule detailing the unit pricing and references for the proposed project. NOTE: A minimum of 3 references is required and must have received the proposed services within the last three calendar years. 3. Quotes must be submitted by 4:30 PM Mountain Daylight Time, Tuesday, May 2, 2017. Send quote to: Rose Wride, Purchasing Agent, USDA-ARS, 1691 S 2700 W, Aberdeen, ID 83210, by email (preferred): Rose.Wride@ars.usda.gov. 4. This is a "Best Value" Acquisition. Award of the contract resulting from this solicitation will be made to the responsible offeror whose proposal offers the "best value" to the Government, which may not necessarily be the quote offering the lowest price nor the highest technical advantage. In the event two or more offerors within the competitive range are considered essentially equal in terms of technical competence, the Government reserves the right to award to the offeror with the lowest realistic price. 5. The Government may elect to conduct discussions with offerors whose quotes are technically acceptable (or which may be expected to be made acceptable by moderate modification) and fall within the competitive price range. The Government reserves the right, however, to award a contract based on initial offers without conducting discussions. Therefore, each quote should be submitted in the most favorable terms from a price and technical standpoint. See FAR 9.104-1. 6. USDA-ARS is Tax Exempt. See attached Tax Exemption Certificate: 720564834F. 7. GSA discounts: The USDA is requesting that schedule contractors extend additional discounts to the USDA when making responses to this solicitation. GSA contract schedule holders are able to offer one-time discounts from established Schedule contracts. Schedule contractors can give one buying member a discount without passing the discount on to the entire federal government. In essence, this provision allows the contractor to offer and the government to avail itself of spot pricing in the commercial market. Criteria for Evaluating Proposals: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: 1. Technical: This factor will be evaluated based on how well the offeror demonstrates their ability to meet the requirements outlined in the Specifications. 2. Price: All quotes must be FOB Destination. Please respond with a firm fixed price quote to Rose.Wride@ars.usda.gov. The Government will evaluate prices offered for reasonableness in accordance with FAR 13.106-3(a) - Basis for Award. 3. Past Performance: This factor will be evaluated based on the offeror's capability and capacity to meet the contract requirements, based on past contract performance. Past performance will be assessed based on references provided to the procurement office. If no references are provided and there is no known past performance with the procurement office, the vendor will be given a neutral rating.  

66--Micrometer System- Notice of Intent to Sole Source

Department of the Army, Army Contracting Command | Published August 28, 2015  -  Deadline September 8, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. APG-ADL-B.5152.206-4400 INTENT TO SOLICIT ONLY ONE SOURCE (FEB 2015) The proposed contract action is for supplies or services for which the Government is soliciting and negotiating with only one source under the authority of, FAR 13.106-1(b)(1)(i). The name of the company the Government intends to award a contract to is Keyence Corporation of America 669 River Drive Suite 403 Elmwood Park NJ 07407. This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received prior to the closing date and time of this solicitation. (ii) The solicitation number is _W911QX-15-T-0337 . This acquisition is issued as a request for quote (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. (iv) The associated NAICS code is 333314. The small business size standard is 500 Employees. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): Quantity one (1) CMOS/GaN-LED (Gallium Nitride-Light Emitting Diode) Micrometer System to include: Four (4) CMOC/GaN-LED Micrometer Sensor Heads (PN: LS-9030M) Four (4) Cable for Displacement Sensors (PN: CB-B3) Two (2) CMOS/GaN-LED Micrometer Controllers (PN: LS-9501) Two (2) CMOS/GaN-LED Micrometer Extension Units (PN: LS-HA-100) One (1) CMOS/GaN-LED Micrometer PC Software (PN: LS-H2) (vi) Description of requirements: See section (v) (vii) Delivery is required by NLT 14 Days ARO. Delivery shall be made to 321 Colleran Road Aberdeen Proving Ground, MD 21005. Acceptance shall be performed at Aberdeen Proving Ground. FOB point is Destination (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: ___NONE__. (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items is applicable to this acquisition. The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: NONE. (x) Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause NONE. (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: FAR: 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug, 2013) 52.219-28, Post-Award Small Business Program Rerepresentation (July 2013) 52.222-3, Convict Labor (June 2003), 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2014) 52.222-21, Prohibition of Segregated Facilities (Apr 2015) 52.222-26, Equal Opportunity (Apr 2015) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) 52.222-50, Combating Trafficking in Persons (March 2, 2015) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) DFARS: 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7011, Alternative Line Item Structure 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7001, Buy American and Balance of Payments Program 252.225-7036, Buy American--Free (B) Trade Agreements-- Balance of Payments Program, with Alt I 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7010, Levies on Contract Payments 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies by Sea (xiii) The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): 52.204-7 System for Award Management (Jul 2013) 52.204-16 Commercial and Government Entity Code Reporting (Jul 2015) 52.204-18 Commercial and Government Entity Code Maintenance (Jul 2015) 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications (Dec 2012), 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) 52.252-2 Clauses Incorporated by Reference (Feb 1998) 252.204-0009 Contract-wide: by Fiscal Year. (SEP 2009) 252.204-7003 Control of Government Personnel Work Product (APR 1982) Full Text clauses: 252.232-7006 Wide Area Workflow Payment Instructions (MAY 2013); 252.211-7003 Item Unique Identification and Valuation (DEC 2013); APG-ADL-B.5152.204-4409 ACC - APG Point of Contact (Apr 2011); APG-ADL-B.5152.204-4411 Technical Point of Contact (Dec 2002); APG-ADL-B.5152.216-4407 Type of Contract (Sep 1999); APG-ADL-L.5152.215-4441 US ARMY CONTRACTING COMMAND (ACC-APG) - ADELPHI CONTRACTING DIVISION WEBSITE APG-ADL-E.5152.246-4400 Government Inspection and Acceptance (Sep 1999); APG-ADL-G.5152.232-4418 Tax Exemption Certificate (Sep 1999); APG-ADL-H.5152.211-4401Alt I Receiving Room Requirements- APG Alternate I (JAN 2003) APG-ADL-I.5152.212-4401 DFARS COMMERCIAL ACQUISITION PROVISIONS AND CLAUSES (MAR 2015) (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as _N/A. __. (xv) The following notes apply to this announcement: N/A (xvi) Offers are due on 09/08/2015, by 11:59 AM EST, at ___jessica.r.camunez.civ@mail.mil (xvii) For information regarding this solicitation, please contact Jessica Camunez, 575-678-8283, jessica.r.camunez.civ@mail.mil

Life Technologies QuantStudio 7k Flex Fast 96-well with 384 well block

Department of the Army, Army Contracting Command | Published November 3, 2015  -  Deadline November 9, 2015
cpvs

Technical Specifications Life Technologies QuantStudio 7k Flex Fast 96-well with 384 well block The RDECOM Edgewood Chemical Biological Center (ECBC) Environmental BioMonitoring Bio lab requires the procurement of one (1) Life Technologies QuantStudio 7 Flex Real-Time Polymerase Chain Reaction (PCR) System, 96-well Fast (item # 4485698). The following technical specifications that shall be provided with the equipment, by the Contractor are listed below:  Block configurations and volume: 96-well (10-100 µL reactions) Fast 96-well (15-30 µL reactions) 384-well (5-20 µL reactions)  Block change design: Block change from front in less than 1 min; no tools or service call required  Excitation source: Enhanced OptiFlex® system, White LED  Detection channels: Decoupled: 6 emission, 6 excitation (96-well/Fast, 384-well, TaqMan® blocks) Coupled: 4 emission, 4 excitation (OpenArray® blocks)  Instrument Dimensions: -H: 70.5cm, D: 70.0cm, W: 53.0 cm  Power: 100-240 V  Data export format: User configurable: *.xls, *xlsx, *.txt Manuals/electronic storage devices containing operating and maintenance instructions shall be provided. Shipping shall be FOB destination. Acceptance will be at the following address: Edgewood Chemical Biological Center 5183 Blackhawk Road Aberdeen Proving Ground, MD 21010 DODAAC: W91B94

59--Miscellaneous Electrical Equipment

Department of the Army, Army Contracting Command | Published September 14, 2015  -  Deadline September 18, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation Number: W91ZLK-15-T-0357 Miscellaneous Electrical Equipment This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-83 (03 September 2015). The solicitation number for this requirement is W91ZLK-15-T-0357. The North American Industry Classification System (NAICS) code applicable to this procurement is 335999 which has a business size standard of 500 employees. This acquisition is being set-aside for small business concerns only. The Government contemplates the award of a Firm-Fixed-Price (FFP) purchase order with delivery within 30 days of award. This procurement is being conducted using the Simplified Acquisition Procedures authorized in FAR Part 13. This requirement is for the purchase and delivery the following electrical items that are brand name or equal to Eaton: TECHNICAL REQUIREMENTS Description of Requirement: CLIN 001 XV-152-E6-10TVRC-10, TFT Resistive; Metal; Codesys; SWDT; Can - 1 EA CLIN 002 XTCE750N22A, Contactor 3P FVNR 750A Frame N 2N (2NC 110-250V AC/DC Coil - 4 EA CLIN 003 XTCEXMLN, Contactor Accessory mechanical Interlock Frame N - 2 EA CLIN 004 CN35DN12AB, LTG CONT OPN 30A 12P 120V - 6 EA CLIN 005 XTCF045C10TD, Contactor 4P 45A Frame C 24-27 - 50 EA CLIN 006 XTRE10B22TD, Control Relay , 10A Frame B 2N0SNC 24VDC Coil - 10 EA CLIN 007 DIL-SWD-32-001, SWDT Contactor Module Auto Only - 60 EA CLIN 008 M22-PVT45P-MPI, E-Stop Twist-Release; 45MM; Mechanical Indicator - 2 EA CLIN 009 M22-SWD-K11, SWDT Pilot Dev ice Module, Front Mount, 1 Contact - 20 EA CLIN 010 M22-XPV60-Y-24, 24V Luminous Rings 3 Sep Control LED Rows - 2 EA CLIN 011 M22-D-S, Non-Ill MOM PB SIL-BZL FLSH BL - 2 EA CLIN 012 M22-L-B, Ind Light Blue - 2 EA CLIN 013 M22-SWD-LED-B, SWDT Pilot Dev ice, Wht LED - 20 EA CLIN 014 M22-L-A, Ind Light Amber - 2 EA CLIN 015 M22-SWD-LED-W, SWDT Pilot Dev ice, White LED - 20 EA CLIN 016 E22VA8, 70MM Diameter Round Visual Aid Plate - Yellow quote mark Emergency Stop quote mark - 2 EA CLIN 017 M22-USB-SA, USB Socket - 2 EA CLIN 018 M22-RJ45-SA, Ethernet RJ45 to RJ45 Pass Thru - 1 EA CLIN 019 E22NS36STAMP, E22 Legend Plate Non-Standard marking - 4 EA CLIN 020 E22NS80, Lgd Plate Aluminum Standard Power On - 2 EA CLIN 021 EU5C-SWD-PF2-1, SWDT Power Feed Module Aux 24VDC 3A & Pow 24VDC 0.7A - 8 EA CLIN 022 EU5C-SWD-4AX, SWDT Analog I/O Module 4 in- 4 EA CLIN 023 EU5E-SWD-2A2A, SWDT Analog I/O Module 2 In, 2 Out - 1 EA CLIN 024 EU5E-SWD-4D2R, SWDT Discrete I/O Module 4 In, 2 Out Relay - 1 EA CLIN 025 PSG480E24RM, Power Supply , 1Phase, 24VDC 480W IP20 Term Metal - 2 EA CLIN 026 M22-L-B-230B, Ind Light Blu 85-264VAC - 1 EA CLIN 027 SWD4-10LF8-24-2S, SWDT Flat Cable 10M 8-Conductor with f lat plugs - 4 EA CLIN 028 SWD4-RC8-10, SWDT Terminating Resistor - 1 EA CLIN 029 SWD4-8SF2-5, SWDT Dev ice Connector Plug 8-pole - 80 EA CLIN 030 SWD4-8MF2, Blade Terminal, Ribbon Cable, Power - 40 EA CLIN 031 XBUT25RD, 4.2MM Wide Red Feed Through TB - 100 EA CLIN 032 XBUT25BK, 5.2MM wide Feed-Through TB 26-12AWG Black - 100 EA CLIN 033 XBUT25, 5.2MM Wide Gray Feed Through TB 26-12AWG - 300 EA CLIN 034 XBUT6, Terminal, 8.2MM Wide, Grey - 50 EA CLIN 035 XBAFBS105, 10 Position Bridge - 10 EA CLIN 036 XBAFBS210, 2 Position Bridge - 10 EA CLIN 037 SWD4-8FRF-10, SWDT Adapter Flat to Round Cable - 4 EA CLIN 038 SWD4-8SFF2-5, Coupling, 8 Pos, Length 34.5mm, External Width, 48.5mm, External height 10mm - 4 EA INSTRUCTIONS AND INFORMATION TO OFFERORS: Supplies will be delivered FOB Destination to Aberdeen Proving Ground, MD 21005. The Contractor shall round any estimated shipping charges into unit prices and shall not charge shipping on a separate line item. The provision at FAR 52.212-2 - Evaluation -- Commercial Items, applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The lowest price technically acceptable (LPTA) process described in FAR 15.101-2 will be used, meaning the award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical evaluation will be a determination based on information furnished by the Contractor. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions. In order to be considered technically acceptable, Contractor responses must provide: a. Detailed information showing that the Contractor is able to meet each of the specifications outlined in the CLIN descriptions above; b. Unit prices for each of the CLINs as broken out above; and c. Point of contact name and contact information, company CAGE code, DUNS number, and TIN. Partial quotes will not be evaluated by the Government. SUBMISSION PROCEDURES: All questions regarding this solicitation must be submitted to the Contract Specialist via email no later than 12:00 p.m. Eastern Time, 17 September 2015, to payten.e.redfearn.mil@mail.mil Responses to this solicitation must be signed, dated, and received no later than 12:00 p.m. Eastern Time, 18 September 2015. Responses must be sent by email directly to the Contract Specialist, Staff Sergeant Payten E. Redfearn at payten.e.redfearn.mil@mail.mil. All quotations from responsible sources will be fully considered. Contractors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Contractors may register with SAM online for free at www.sam.gov. Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications- Commercial Items, with its offer. FAR 52.252-1 - Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at the following address: http://farsite.hill.af.mil The following clauses and provisions are incorporated by reference: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government, Alternate I FAR 52.204-7, System for Award Management FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.204-13, System for Award Management Maintenance FAR 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment FAR 52.211-6, Brand Name or Equal FAR 52.212-1, Instructions to Offerors- Commercial Items FAR 52.212-2, Evaluation- Commercial Items FAR 52.212-3, Offeror Representations and Certifications - Commercial Items FAR 52.212-4, Contract Terms and Conditions - Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items (Deviation 2013-O0019) FAR 52.219-13, Notice of Total Small Business Set-Aside FAR 52.219-28, Utilization of Small Business Concerns FAR 52.219-14, Limitations on Subcontracting FAR 52.219-28, Post Award Small Business Program Rerepresentation FAR 52.222-3, Convict Labor FAR 52.222-19, Child Labor- Cooperation with Authorities and Remedies FAR 52.222-21, Prohibition of Segregated Facilities FAR 52.222-26, Equal Opportunity FAR 52.222-35, Equal Opportunity for Veterans FAR 52.222-36, Affirmative Action for Workers with Disabilities FAR 52.222-37, Employment Reports on Veterans FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications FAR 52.232-33, Payment by Electronic Funds Transfer- System for Award Management FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.233-1, Disputes FAR 52.233-2, Service of Protest FAR 52.233-3, Protest After Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.239-1, Privacy or Security Safeguards FAR 52.243-1, Changes- Fixed Price FAR 52.247-34, FOB- Destination FAR 52.249-8, Default (Fixed-Price Supply and Service) DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors DFARS 252-211-7003, Item Identification and Valuation DFARS 252.216-7006, Ordering DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7012, Preference for Certain Domestic Commodities DFARS 252.225-7035 Alternate I, Buy American - Free Trade Agreements - Balance of Payments Program Certificate DFARS 252.225-7036 Alternate I, Buy American - Free Trade Agreements - Balance of Payments Program DFARS 252.225-7048, Export-Controlled Items DFARS 252.226-7001, Utilization of Indian Organizations and Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel DFARS 252.243-7002, Requests for Equitable Adjustment DFARS 252.243-7001, Pricing of Contract Modifications DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea EXEMPTION CERTIFICATE FROM MARYLAND RETAIL SALES AND USE TAX (OCT 2012) ACC-APG 5152.229-4900 Exemption Certificate No. 30005004 covers exemption from Maryland Retail Sales and Use Tax. AMC-LEVEL PROTEST PROGRAM (AUG 2012) ACC-APG 5152.233-4900 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible Contracting Officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accounting Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Send protests (other than protests to the Contracting Officer) to: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Phone: (256) 450-8165 Fax: (256) 450-8840 E-mail: amcprotests@conus.army.mil The AMC-Level Protest Procedures are accessible via the Internet at: www.amc.army.mil/amc/commandcounsel.html. If Internet access is not available, contact the Contracting Officer or HQ, AMC, to obtain the AMC-Level Protest Procedures. For questions concerning this solicitation, contact Staff Sergeant Payten E. Redfearn, Contract Specialist, at payten.e.redfearn.mil@mail.mil. TELEPHONE REQUESTS WILL NOT BE HONORED.

66--One (1) Optp-Digital Upright Microscope package

Department of the Army, Army Contracting Command | Published July 29, 2015  -  Deadline August 5, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (i)This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. APG-ADL-B.5152.206-4400(INTENT TO SOLICIT ONLY ONE SOURCE ) The proposed contract action is for supplies or services for which the Government is soliciting and negotiating with only one source under the authority of FAR 13.106-1(b) (1)(i) quote mark Only one responsible source and No Other Supplies or Services Will Satisfy Agency Requirements. quote mark The name of the company the Government intends to award a contract to is Leco Corporation, 3000 Lakeview Aveune, St. Joseph, MI 49085-2396. This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received prior to the closing date and time of this solicitation. (ii) The solicitation number is W911QX-15-T-0218. This acquisition is issued as a Request for Quote (RFQ) / Notice of Intent to Sole Source. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-81. (iv) The associated NAICS code is 333314 The small business size standard is 500 (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): SEE APG-ADL-B.5152.206-4400 INTENT TO SOLICIT ONLY ONE SOURCE PROVISION. CLIN 001 - One (1) Opto - Digital Upright Microscope CLIN 002 - Motorized Stage CLIN 003 - DSX 40X Objective Lenses CLIN 004 - DSX 10X Objective Lenses CLIN 005 - Super - HDR imaging Module CLIN 006 - 20X Bright Field Polarized Objective CLIN 007 - 50X Bright Field Polarized Objective CLIN 008 - 5X Bright Field Polarized Objective CLIN 009 - DSX 3D Measuring Module CLIN 010 - DSX particle Analysis Module CLIN 011 - Transmitted LED Illuminator CLIN 012 - Software Digital Acquisitionand Enhanced Measurement CLIN 013 - On-site Training (vi) Description of requirements: QTY DESCRIPTION UNIT 1 Opto-Digital Upright Microscope Each 1 Motorized Stage Each 1 DSX 40X Objective Lenses Each 1 DSX 10X Objective Lenses Each 1 Super-HDR Imaging Module Each 1 20X BrightField/DarkField Polarized Objective Each 1 50X BrightField/DarkField Polarized Objective Each 1 5X BrightField/DarkField Polarized Objective Each 1 DSX 3D Measuring Module Each 1 DSX Particle Analysis Module Each 1 Transmitted LED Illuminator Each 1 Software, Digital Acquisition & Enhanced Measurement Each 4 On-Site Training Hour (vii) Delivery is required by 60 days after contract award. Delivery shall be made to: US Army Research Aberdeen Proving Ground, MD 21005-5001 Acceptance shall be performed at the Aberdeen Proving Ground, MD The FOB Destination: Aberdeen Proving Ground, MD 21005-5001 (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: NONE (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items are not applicable to this acquisition. APG-ADL-B.5152.206-4400 INTENT TO SOLE SOURCE (x) Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause: NONE (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006) ALTERNATE I (OCT 1995) ; 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (JUL 2013) ; 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (AUG 2013) ; 52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (MAY 2012) ; 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) 52.222-3 CONVICT LABOR (June 2003) ; 52.222-19 CHILD LABOR-COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2014) ; 52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) ; 52.222-26 EQUAL OPPORTUNITY (MAR 2007) ; 52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010) ; 52.222-50 COMBATING TRAFFICKING IN PERSONS (FEB 2009) ; 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) ; 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) ; 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (JUL 2013) ; 52.233-3 PROTEST AFTER AWARD (Aug 1996) ; 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (Oct 2004) ; 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) ; 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) ; 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) ; 252.204-7011 ALTERNATIVE LINE ITEM STRUCTURE (SEP 2011) ; 252.209-7001 DISCLOSURE OF OWNERSHIP OR CONTROL BY THE GOVERNMENT OF A TERRORIST COUNTRY (JAN 2009) ; 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) ; 252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2012) ; 252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013) ; 252.225-7021 TRADE AGREEMENTS ; 252.232-7010 LEVIES ON CONTRACT PAYMENTS, AS PRESCRIBED IN 232.7102 ; 252.244-7000, SUBCONTRACTS FOR COMMERCIAL ITEMS, AS PRESCRIBED IN 244.403 ; 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (JUN 2013) (xiii) The following additional contract requirement(s) or terms and conditions apply (full text of all local clauses can be found in the attached ACC-APG Adelphi Local Clauses Full Text document): 52.232-1 PAYMENTS (Apr 1984) ; 52.232-8 DISCOUNTS FOR PROMPT PAYMENT (Feb 2002) ; 52.232-11 EXTRAS (Apr 1984) ; 52.232-25 PROMPT PAYMENT (Oct 2008) ; 52.233-1 DISPUTES (July 2002) ; 52.244-6 SUBCONTRACT FOR COMMERCIAL ITEMS (Dec 2009) ; 52.253-1 COMPUTER GENERATED FORMS (Jan 1991) ; 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER (MAY 2011) ; 52.204-7 SYSTEM FOR AWARD MANAGEMENT (JUL 2013) ; 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR TRANSACTIONS RELATING TO IRAN-- REPRESENTATION AND CERTIFICATIONS (DEC 2012) 52.243-1 CHANGES-FIXED PRICE (AUG 1987) 52.246-2 INSPECTION OF SUPPLIES - FIXED PRICE (AUG 1996) ; 52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984) ; 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998); 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2011) ; 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) ; 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) APG-ADL-B.5152.204-4409 ACC - APG POINT OF CONTACT (APR 2011) ; APG-AD-B.5152.204-4411 TECHNICAL POINT OF CONTACT (DEC 2002) ; APG-ADL-B.5152.216-4407 TYPE OF CONTRACT (SEP 1999) ; APG-ADL-E.5152.246-4400 GOVERNMENT INSPECTION AND ACCEPTANCE (SEP 1999) ; APG-ADL-G.5152.232-4418 TAX EXEMPTION CERTIFICATE (SEP 1999) ; APG-ADL-H.5152.205-4401 RELEASE OF INFORMATION BY MANUFACTURERS, RESEARCH ORGANIZATIONS, EDUCATIONAL INSTITUTIONS, AND OTHER COMMERCIAL ENTITIES HOLDING ARMY CONTRACTS (AUG 2006) ; APG-ADL-H.5152.211-4401ALT RECEIVING ROOM REQUIREMENTS - APG ALTERNATE I (JAN 2003) (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as: N/A (xv) The following notes apply to this announcement: None (xvi) Offers are due on: 05 August 2015 by 3:00 pm (EST), at: nathlie.m.hicks.civ@mail.mil (xvii) For information regarding this solicitation, please contact: Nathlie M. Hicks, TelephoneNumber: 301-394-3985, nathlie.m.hicks.civ@mail.mil

39--Forklift 4000 lbs.

Department of the Army, FedBid | Published August 14, 2015  -  Deadline August 28, 2015
cpvs

Bids are being solicited under solicitation number W91ZLK-15-T-0349. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 744508. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-08-28 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Aberdeen Proving Ground, MD 21005 The APG - Tenant Division requires the following items, Meet or Exceed, to the following: LI 001: Forklift 4000 lbs. Diesel Engine with a Cab. The cab is needed to protect the operator, the forklift will be used daily under all weather conditions and can travel distances over three miles. The remote location requires a dependable and rugged forklift., 1, EA; LI 002: Forklift Accessories: Cab enclosed with heater Mast 2-stage standard Mast No more than 130" Max Fork Height No more than 86" Overall Lowered Height Side Shifter ISO Class II Side shifter Forks 72" Hook Type Pallet Forks Lights headlight/work light and back up light amber LED strobe light, keyswitch activated should not increase truck height Tires Solid, Pneumatic, Tires Seats Vinyl Suspension Seat w/seatbelt Alarm Back-Up Alarm Mirrors Rear View Mirrors Warranty Minimum 12 Month/2,000 Hour Complete Machine 36 Month/4,000 Hour Drive Train Manuals English: Operator and Maintenance, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, APG - Tenant Division intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. APG - Tenant Division is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Everglades Boat Repair

Department of the Army, Army Contracting Command | Published August 3, 2015  -  Deadline August 18, 2015
cpvs

The combined synopsis/ solicitation number is W56ZTN-15-T-0018. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-83 The Government contemplates award of a Firm-Fixed Price (FFP) Purchase Order for repair of the MWE Everglades Patrol Boat. United States Army, Aberdeen Proving Ground Directorate of Emergency Services (DES) in accordance with the Performance Work Statement. This solicitation is set aside for small business. The Associated North America Industry Classification Code (NAICS) is 336611 and the Business Size Standard is 1000. This acquisition is in accordance with FAR Part 13. This requirement is not being procured in accordance with FAR Part 8 and only Open Market, NOT General Service Administration (GSA) quotations are being accepted from responsible contractors. Acceptance and inspection shall be at DESTINATION. Final completion/destination shall be at Aberdeen Proving Ground, MD 21005 CLIN 0001:.The Aberdeen Proving Ground Directorate of Emergency Services (DES) has a requirement for services to repair the MWE Everglades Patrol Boat. DES needs a onetime repair on all boat electronics and system due to water damage. Items to repair include: • Engines and electronics. • Rigging of entire boat for Yamaha systems and displays. • Replacement all Garmin chart plotter systems. • Replacement of radar systems. • Electrical systems to include battery switches, can links, main harness, electrical panels and fuse blocks, associated wiring, head unit, LED lighting, spot light and radar mount. • Pump fuel tanks and dispose of contaminated fuel. • Contractor shall be responsible to transport boat to and from repair location. The contractor shall provide all personnel, equipment, tools, materials, supervision and non-personal services necessary to support approved repairs. Contractor shall have all necessary Yamaha certifications required to repair/replace Yamaha systems. All work will be completed at the contractor's location off Aberdeen Proving Ground (APG). The contractor shall be able to install replacement parts and repair the Everglades Patrol Boat to working condition within 30 days of contract award. CLIN 0002: Accounting for Contract Services. Cost for Providing Accounting for Contract Services-ACC-APG 5152.237-4900, Accounting for Contract Services Requirement, has been added to the statement of the work, and the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of the contract. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "No Cost". Instruction, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil. The following provisions and clauses will be incorporated by reference: 52.203-3 Gratuities 52.203-6, Restrictions on Subcontractor Sales to the Government, with Alternate I (41 U.S.C 253S and 10 U.S .C. 2402) 52.203-13, Contractor Code of Business Ethics and Conduct 52.204-7, System for Award Management 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters 52.211-6, Brand Name or Equal 52.212-1 Instruction to Offerors Commercial Items 52.212-2, Evaluation Commercial Items: The contract will be awarded to the Lowest Price Technically Acceptable (LPTA) offeror. The award will be made on the basis of the lowest evaluated price of quotations meeting or exceeding the acceptability standards for non-cost factors, which are the technical requirements in accordance with attached W56ZTN-15-T-0018 Performance Work Statement. The technical evaluation will be a determination based on information furnished by the vendor. The Government is not responsible for locating or securing any information which is not identified in the quotation. The following factors shall be used to evaluate offers: Lowest Price Technically Acceptable: a. Award will be made on the basis of the lowest evaluated price quotation technically meeting or exceeding the acceptability standards of the required service in accordance with the attached this solicitation, W56ZTN-15-T-0018 Performance Work Statement. The Government reserves the right to make an award without discussions. Government reserves the right to award on all or none basis. b. Past performance will also be evaluated, the offeror shall have provided boat repair services over the past 3 years. Offeror must demonstrate that they have experience, in providing similar like services within the last 3 years. 52.212-3, An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically via https://www.acquistion.gov If an offeror has not completed the annual representations and certifications electronically at the SAM website, the offeror shall complete only paragraphs (c) through (o) of this provision at https://www.sam.gov 52.212-4 Contract Terms and Conditions Commercial Items. 52.212-5, Contract terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items (DEVIATION 2013-O0019) 52.219-6 Notice of Total Small Business Set-Aside 52.219-8 Utilization of Small Business Concerns 52.219-14 Limitations on Subcontracting 52.222-3, Convict Labor 52.222-19 Child Labor Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era and Other Disabled Veterans 52.222-17, Nondisplacement of Qualified Workers 52.222-36 Affirmative Action for Workers with Disabilities 52.222-37 Employment Reports on Disabled veterans and Veterans of the Vietnam Era 52.222-54, Employment Eligibility Verification (Jul 2012 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. 52.222-50, Combating Trafficking in Persons 52.222-40, Notification of Employee Rights Under the National Labor Relations Act 52.222-41, Service Contract Labor Standards 52.223-11 Ozone Depleting Substances 52.223-3 Hazardous Material Identification and Material Safety Data 52.223-5 Pollution Prevention and Right to Know Information 52.225-2 Buy American Act - Supplies 52.225-13 Restrictions on Certain Foreign Purchase 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration 52.239-1, Privacy or Security Safeguards 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.237-2 Protection of Government Buildings, Equipment and Vegetation 52.246-2 Inspection of Supplies-Fixed Price 52.247-34 FOB Destination 52.252-1 Solicitation Provisions Incorporated by Reference: This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7003 Agency Office of the Inspector General 252.204-7004 Alt A System for Award Management Alternate A 252.225-7001 Buy America and Balance of Payment Program 252.223-7001 Hazard Warning Labels 252.223-7006 Prohibition on Storage and Disposal Of Toxic and Hazardous Materials 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7008 Restriction on Acquisition of Specialty Metals 252.225-7009 Restriction on Acquisition of Certain Article Containing Specialty Metals 252.225-7012 Preference for Certain Domestic Commodities 252.225-7015 Restriction on Acquisition of Hand or Measuring Tools 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings 252.225-7038 Restriction on Acquisition of Air Circuit Breakers 252.232-7007 Limitation of Government's Obligation 252.232-7003 Electronic Submission of Payment Requests 252-247-7023 Transportation of Supplies by Sea 252-247-7024 Notification of Transportation of Supplies by Sea 252-211-7003 Item Identification and Valuation EXEMPTION CERTIFICATE FROM MARYLAND RETAIL SALES AND USE TAX (JUL 1999) (APG 52.0229-4100) Exemption Certificate No. 30005004 covers exemption from Maryland Retail Sales and Use Tax. AMC-LEVEL PROTEST (NOV 2008) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Materiel Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number: (703) 806-8866 or 8875 Packages sent by FedEx, UPS, or other delivery service should be addressed to: HQ Army Materiel Command Office of Command Counsel Room2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-level protest procedures are located on the Internet. If Internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-level protest procedures. http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp Quotations must be dated and received by US Army Contracting Command, Aberdeen Proving Ground, Tenant Division 6001 Combat Drive, 2nd Floor, Room C2-101, Aberdeen Proving Ground, MD, 21005-1846, Attention Ms. Amy Bowen via email amy.m.bowen.civ@mail.mil no later than August 18, 2015 @ 10:00 AM Eastern Time (ET). All quotations from responsible sources will be fully considered. Vendors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Vendors may register with SAM by calling 1-866-606-8220 or online at https://www.sam.gov service desk http://www.FSD.gov. For questions concerning this Request for Quotation contact Ms. Amy Bowen via email amy.m.bowen.civ@mail.mil. Please provide any questions no later than August 14, 2015 @ 10:00 AM eastern time (ET). NO TELEPHONE REQUESTS WILL BE HONORED.

66--Thermocouple Interface Module

Department of the Army, Army Contracting Command | Published May 7, 2015  -  Deadline May 20, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-81 (10 April 2015). The solicitation number for this requirement is W91ZLK-15-T-0180. This requirement has been deemed a 100% small business set aside under the associated North American Industry Classification System (NAICS) Code 334513, Instruments and Related Products Manufacturing for Measuring Displaying and Controlling Industrial Process Variables, which has a business size standard of 500 employees. The Government contemplates the award of a Firm-Fixed-Price (FFP) purchase order with delivery within 30 days of award. This procurement is being conducted using the Simplified Acquisition Procedures authorized in FAR Part 13. This requirement is for the purchase and delivery of the following: Universal Thermocouple to CAN bus Interface Modules with Cable Assemblies CLIN 0001: Thermocouple Interface Module. QTY: 15 The thermocouple interface module provides a digital data stream containing temperature readings generated by up to 8 thermocouples. The module will accept up to 8 standard thermocouple inputs, digitize, linearize and output via CAN bus to a data logger. Each of the 8 channels of the module will be programmable to accept either a J, K, N, R, S or T type thermocouple on each channel input. Required technical specifications: 1. Maximum number of inputs: 8 2. Input Type: T-Type, K-Type, J-Type, R-Type, N-Type thermocouple 3. Cold junction compensation for each channel 4. Sample rate maximum: 20 Hz per input 5. Full galvanic isolation 6. Each channel has one LED for sensor break detection 7. Output format: CAN 2.0B according to ISO 11898-2 8. Minimum module enclosure is rating is IP67 9. Output and power connectors are water resistant 10. Minimum module operating temperature range: -40 Deg C to +125 Deg C 11. Required input Voltage: 9 to 36 Volts Dc 12. Maximum Power Consumption; 1.5 Watts Cable Assemblies: The Thermocouple Interface Modules will be provided with cables that connect the modules to each other, to external data acquisition systems and to external power source, as follows: CLIN 0002: Cable assembly QTY: 10 The module interconnect cables will interface to the CAN connector of each module and shall be a minimum of 4 feet in length. CLIN 0003: Cable assembly QTY: 20 The cable from module to external data acquisition system will have the module CAN connector at one end and a Sub D female 9-pin at the other end. The cable shall be a minimum of 4 feet in length. CLIN 0004: Cable assembly QTY: 2 The cable from module to external power will have the module CAN connector at one end and a Sub D female 9-pin with three banana jacks the other end. The cable shall be a minimum of 4 feet in length. INSTRUCTIONS AND INFORMATION TO OFFERORS: Supplies will be delivered FOB Destination to Aberdeen Proving Ground, MD 21005. The Contractor shall round any estimated shipping charges into unit prices and shall not charge shipping on a separate line item. The provision at FAR 52.212-2 - Evaluation -- Commercial Items, applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The lowest price technically acceptable (LPTA) process described in FAR 15.101-2 will be used, meaning the award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical evaluation will be a determination based on information furnished by the Contractor. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions. In order to be considered technically acceptable, Contractor responses must provide: a. Detailed information showing that the Contractor is able to meet each of the specifications outlined in the CLIN descriptions above; b. Unit prices for each of the CLINs as broken out above; and c. Point of contact name and contact information, company CAGE code, DUNS number, and TIN. Partial quotes will not be evaluated by the Government. SUBMISSION PROCEDURES: All questions regarding this solicitation must be submitted to the Contract Specialist via email no later than 12:00 p.m. Eastern Time, 14 May 2015, to masiray.a.kallay.mil@mail.mil. Responses to this solicitation must be signed, dated, and received no later than 12:00 p.m. Eastern Time, 20 May 2015. Responses must be sent by email directly to the Contract Specialist, CPT Masiray A. Kallay, at masiray.a.kallay.mil@mail.mil. All quotations from responsible sources will be fully considered. Contractors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Contractors may register with SAM online for free at www.sam.gov. Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications- Commercial Items, with its offer. FAR 52.252-1 - Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at the following address: http://farsite.hill.af.mil The following clauses and provisions are incorporated by reference: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government, Alternate I FAR 52.204-7, System for Award Management FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.204-13, System for Award Management Maintenance FAR 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment FAR 52.212-1, Instructions to Offerors- Commercial Items FAR 52.212-2, Evaluation- Commercial Items FAR 52.212-3, Offeror Representations and Certifications - Commercial Items FAR 52.212-4, Contract Terms and Conditions - Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items (Deviation 2013-O0019) FAR 52.219-6, Notice of Total Small Business Set-Aside FAR 52.219-8, Utilization of Small Business Concerns FAR 52.219-13, Notice of Set-Aside of Orders FAR 52.219-14, Limitations on Subcontracting FAR 52.219-28, Post-Award Small Business Program Representation FAR 52.222-3, Convict Labor FAR 52.222-19, Child Labor- Cooperation with Authorities and Remedies FAR 52.222-21, Prohibition of Segregated Facilities FAR 52.222-26, Equal Opportunity FAR 52.222-35, Equal Opportunity for Veterans FAR 52.222-36, Affirmative Action for Workers with Disabilities FAR 52.222-37, Employment Reports on Veterans FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications FAR 52.232-33, Payment by Electronic Funds Transfer- System for Award Management FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.233-1, Disputes FAR 52.233-2, Service of Protest FAR 52.233-3, Protest After Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.239-1, Privacy or Security Safeguards FAR 52.243-1, Changes- Fixed Price FAR 52.247-34, FOB- Destination FAR 52.249-8, Default (Fixed-Price Supply and Service) DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors DFARS 252-211-7003, Item Identification and Valuation DFARS 252.216-7006, Ordering DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7012, Preference for Certain Domestic Commodities DFARS 252.225-7048, Export-Controlled Items DFARS 252.226-7001, Utilization of Indian Organizations and Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel DFARS 252.243-7002, Requests for Equitable Adjustment DFARS 252.243-7001, Pricing of Contract Modifications DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea EXEMPTION CERTIFICATE FROM MARYLAND RETAIL SALES AND USE TAX (OCT 2012) ACC-APG 5152.229-4900 Exemption Certificate No. 30005004 covers exemption from Maryland Retail Sales and Use Tax. AMC-LEVEL PROTEST PROGRAM (AUG 2012) ACC-APG 5152.233-4900 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible Contracting Officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accounting Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Send protests (other than protests to the Contracting Officer) to: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Phone: (256) 450-8165 Fax: (256) 450-8840 E-mail: amcprotests@conus.army.mil The AMC-Level Protest Procedures are accessible via the Internet at: www.amc.army.mil/amc/commandcounsel.html. If Internet access is not available, contact the Contracting Officer or HQ, AMC, to obtain the AMC-Level Protest Procedures. For questions concerning this solicitation, contact CPT Masiray A. Kallay, Contract Specialist, via email at masiray.a.kallay.mil@mail.mil. TELEPHONE REQUESTS WILL NOT BE HONORED.

66--Thermocouple Interface Module

Department of the Army, Army Contracting Command | Published September 1, 2015  -  Deadline September 14, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation Number: W91ZLK-15-T-0386 Thermocouple Interface Module This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-83 (03 August 2015). The solicitation number for this requirement is W91ZLK-15-T-0386. The North American Industry Classification System (NAICS) code applicable to this procurement is 334513 which has a business size standard of 500 employees. This acquisition is unrestricted and is not set-aside for any particular socio-economic concern. The Government contemplates the award of a Firm-Fixed-Price (FFP) purchase order with delivery within 30 days of award. This procurement is being conducted using the Simplified Acquisition Procedures authorized in FAR Part 13. This requirement is for the purchase and delivery of the following: TECHNICAL REQUIREMENTS Universal Thermocouple to CAN bus Interface Modules Item 1: Thermocouple Interface Module. QTY: 15 The thermocouple interface module provides a digital data stream containing temperature readings generated by up to 8 thermocouples. The module will accept up to 8 standard thermocouple inputs, digitize, linearize and output via CAN bus to a data logger. Each of the 8 channels of the module will be programmable to accept either a J, K, N, R, S or T type thermocouple on each channel input. 1. Maximum number of inputs: 8 2. Input Type: T-Type, K-Type, J-Type, R-Type, N-Type thermocouple 3. Cold junction compensation for each channel 4. Sample rate maximum: 20 Hz per input 5. Full galvanic isolation 6. Each channel has one LED for sensor break detection 7. Output format: CAN 2.0B according to ISO 11898-2 8. Minimum module enclosure is rating is IP67 9. Enclosure shall be made of anodized aluminum 10. Output and power connectors are water resistant 11. Minimum module operating temperature range: -40 Deg C to +125 Deg C 12. Measurement drift over operating temperature range: +/- 10 ppm/K 13. Required input Voltage: 9 to 36 Volts Dc 14. Maximum Power Consumption; 1.5 Watts Cable Assemblies: The Thermocouple Interface Modules will be provided with cables that connect the modules to each other, to external data acquisition systems and to external power source. Cable assembly is required to be brand name Ipetronik Part Number: 620-560.1.5, or equivalent to the specifications of those cables. Item 2: Cable assembly - 620-560.1.5 QTY: 10 The module interconnect cables will interface to the CAN connector of each module and shall be a minimum of 4 feet in length. Cable assembly is required to be brand name Ipetronik Part Number: 620-567.1.5, or equivalent to the specifications of those cables. Item 3: Cable assembly -620-567.1.5 QTY: 20 The cable from module to external data acquisition system will have the module CAN connector at one end and a Sub D female 9-pin at the other end. The cable shall be a minimum of 4 feet in length. Cable assembly is required to be brand name Ipetronik Part Number: 620-502.105, or equivalent to the specifications of those cables. Item 4: Cable assembly - 620-502.015 QTY: 2 The cable from module to external power will have the module CAN connector at one end and a Sub D female 9-pin with three banana jacks the other end. The cable shall be a minimum of 4 feet in length. INSTRUCTIONS AND INFORMATION TO OFFERORS: Supplies will be delivered FOB Destination to Aberdeen Proving Ground, MD 21005. The Contractor shall round any estimated shipping charges into unit prices and shall not charge shipping on a separate line item. The provision at FAR 52.212-2 - Evaluation -- Commercial Items, applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The lowest price technically acceptable (LPTA) process described in FAR 15.101-2 will be used, meaning the award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical evaluation will be a determination based on information furnished by the Contractor. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions. In order to be considered technically acceptable, Contractor responses must provide: a. Detailed information showing that the Contractor is able to meet each of the specifications outlined in the CLIN descriptions above; b. Unit prices for each of the CLINs as broken out above; and c. Point of contact name and contact information, company CAGE code, DUNS number, and TIN. Partial quotes will not be evaluated by the Government. SUBMISSION PROCEDURES: All questions regarding this solicitation must be submitted to the Contract Specialist via email no later than 12:00 p.m. Eastern Time, 9 September 2015, to payten.e.redfearn.mil@mail.mil Responses to this solicitation must be signed, dated, and received no later than 12:00 p.m. Eastern Time, 14 September 2015. Responses must be sent by email directly to the Contract Specialist, Staff Sergeant Payten E. Redfearn at payten.e.redfearn.mil@mail.mil. All quotations from responsible sources will be fully considered. Contractors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Contractors may register with SAM online for free at www.sam.gov. Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications- Commercial Items, with its offer. FAR 52.252-1 - Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at the following address: http://farsite.hill.af.mil The following clauses and provisions are incorporated by reference: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government, Alternate I FAR 52.204-7, System for Award Management FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.204-13, System for Award Management Maintenance FAR 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment FAR 52.211-6, Brand Name or Equal FAR 52.212-1, Instructions to Offerors- Commercial Items FAR 52.212-2, Evaluation- Commercial Items FAR 52.212-3, Offeror Representations and Certifications - Commercial Items FAR 52.212-4, Contract Terms and Conditions - Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items (Deviation 2013-O0019) FAR 52.219-14, Limitations on Subcontracting FAR 52.222-3, Convict Labor FAR 52.222-19, Child Labor- Cooperation with Authorities and Remedies FAR 52.222-21, Prohibition of Segregated Facilities FAR 52.222-26, Equal Opportunity FAR 52.222-35, Equal Opportunity for Veterans FAR 52.222-36, Affirmative Action for Workers with Disabilities FAR 52.222-37, Employment Reports on Veterans FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications FAR 52.232-33, Payment by Electronic Funds Transfer- System for Award Management FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.233-1, Disputes FAR 52.233-2, Service of Protest FAR 52.233-3, Protest After Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.239-1, Privacy or Security Safeguards FAR 52.243-1, Changes- Fixed Price FAR 52.247-34, FOB- Destination FAR 52.249-8, Default (Fixed-Price Supply and Service) DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors DFARS 252-211-7003, Item Identification and Valuation DFARS 252.216-7006, Ordering DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7012, Preference for Certain Domestic Commodities DFARS 252.225-7035 Alternate I, Buy American - Free Trade Agreements - Balance of Payments Program Certificate DFARS 252.225-7036 Alternate I, Buy American - Free Trade Agreements - Balance of Payments Program DFARS 252.225-7048, Export-Controlled Items DFARS 252.226-7001, Utilization of Indian Organizations and Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel DFARS 252.243-7002, Requests for Equitable Adjustment DFARS 252.243-7001, Pricing of Contract Modifications DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea EXEMPTION CERTIFICATE FROM MARYLAND RETAIL SALES AND USE TAX (OCT 2012) ACC-APG 5152.229-4900 Exemption Certificate No. 30005004 covers exemption from Maryland Retail Sales and Use Tax. AMC-LEVEL PROTEST PROGRAM (AUG 2012) ACC-APG 5152.233-4900 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible Contracting Officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accounting Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Send protests (other than protests to the Contracting Officer) to: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Phone: (256) 450-8165 Fax: (256) 450-8840 E-mail: amcprotests@conus.army.mil The AMC-Level Protest Procedures are accessible via the Internet at: www.amc.army.mil/amc/commandcounsel.html. If Internet access is not available, contact the Contracting Officer or HQ, AMC, to obtain the AMC-Level Protest Procedures. For questions concerning this solicitation, contact Staff Sergeant Payten E. Redfearn, Contract Specialist, at payten.e.redfearn.mil@mail.mil. TELEPHONE REQUESTS WILL NOT BE HONORED.

66--BRAND NAME OR EQUAL Orbitrap Fusion ETD Mass Spectrometer System

Department of the Army, Army Contracting Command | Published March 18, 2015  -  Deadline April 17, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. COMBINED SYNOPSIS/SOLICITATION W91ZLK-15-R-0018 Orbitrap Fusion ETD Mass Spectrometer System BRAND NAME OR EQUAL This combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-79. The solicitation number for this request for proposal (RFP) is W91ZLK-15-R-0018. This requirement is under the associated North American Industry Classification System (NAICS) Code 334516, Analytical Laboratory Instrument Manufacturing Business Size Standard in number of employees is 500. The Government contemplates award of a Firm-Fixed Price contract under FAR Part 12, Acquisition of Commercial Items. This procurement will be evaluated as lowest price technically acceptable, for the procurement of the following brand name or equal: Orbitrap Fusion ETD Mass Spectrometer System Specifications: BRAND NAME OR EQUAL TO the ORBITRAP FUSION ETD MASS SPECTROMETER SYSTEM SYSTEM ORBITRAP FUSION ETD ORGINAL EQUIPMENT MANUFACTURE (OEM): Thermo Scientific Orbitrap Fusion ETD (FSN01-10002, SYSTEM, ORBITRAP, FUSION, ETD) mass spectrometer combines quadrupole, linear ion trap, and Orbitrapmass analyzers and features multiple fragmentation techniques-CID, HCD, ETD and EThCD - all available at any stage of MSn, with subsequent mass analysis in either the ion trap or Orbitrap mass analyzer. Every Orbitrap spectrum can be calibrated in real time with theEASY-IC Ion Source. The instrument contains the following: EASY-Max NG ion source API inlet source housing with x- and y-direction probe positioning and a fixed on-axis view port. All gas and voltage connections are hard connected automatically, enabling worry-free performance and ultimate reliability. The EASY-Max NG ion source includes one HESI spray insert. EASY-Max NG ion source with APCI includes both HESI and APCI spray inserts. EASY-IC Ion Source generates internal calibrant ions for real time mass calibration of any Orbitrap spectrum. Vacuum system containing a split-flow turbo molecular pump, which controls the vacuum in multiple regions. Progressively spaced stacked-ring ion guide (S-Lens), which captures and efficiently focuses ions in a tight beam. The Active Beam Guide reduces noise by preventing neutrals and high-velocity clusters from entering the quadrupole mass filter. Quadrupole Mass Filter consisting of 4mm field radius quadrupole mass analyzer with a hyperbolic surface and a 10% RF imbalance, which provide excellent peak shape and transmission with a minimum resolution of 0.4 FWHM. Orbitrap Mass Analyzer with an m/z range of 50-6000, resolving power of up to 500,000 FWHM and isotopic fidelity of up to 240,000 FWHM at m/z 200. A Dual-Pressure Linear Ion Trap used for MSn precursor ion isolation and collision induced dissociation (CID) and electron-transfer dissociation (ETD). The ions are detected at a maximum scan rate of 20 Hz using a dual-dynode detector with high linear dynamic range for improved quantitation and a large surface area for increased lifespan and robustness. EASY-ETD Ion Source, generating fluoranthene anions for electron transfer dissociation (ETD) and the EASY-IC Ion Source generating internal calibrant ions for real-time mass calibration of any Orbitrap spectrum. The system also features an independent dual barrel syringe pump and injector/divert valve with mounting bracket, which are both controlled via the data station for maximum flexibility. Computer System: OptiPlex 9010 Minitower Processor: 3rd Generation Intel Core i7-3770 Processor Memory: 8 GB, 3.4GHz w/ HD4000 Graphics Monitor: Dell S2740L (27 quote mark ) LED Monitor Video: Intel Integrated Graphics w/o Adapters Hard Drive: 1TB SATA 6Gb/x with 32MB DataBurst Cache, 1TB DVD: 16X DVD +/- RW SATA, 16X DVD ROM SATA Keyboard: Dell USB Keyboard, English. Mouse: Dell USB Optical Mouse This clause applies in its entirety and there are currently no addenda to the provision. Proposals shall be submitted in two (2) separate volumes: Volume I: Orbitrap Fusion ETD System W91ZLK-15-R-0018 PRICE PROPOSAL Volume II: Orbitrap Fusion ETD System W91ZLK-15-R-0018 TECHNICAL PROPOSAL ALL PROPOSALS SHALL BE SUBMITTED VIA EMAIL WITH THE SUBJECT LINE: W91ZLK-15-R-0018 PROPOSAL FROM (INSERT COMPANY NAME) Proposal Format: Volume I: Detailed Price Proposal to include the following elements: 1. Header Page Company Name, DUNS, CAGE, Business Type/Size, ETN# and point of contact information to include: Name, title, email address, and telephone number including extension. 2.INCLUDE ALL Information Below: Item 0001: Orbitrap Fusion ETD System QTY: __________ Unit Cost: ________ Total Cost: ________ Item: 0002: Installation: Total Cost: ______________ **Note** Firm Fixed Priced cost for all labor associated with removal, disposal and installation of materials **Note** F.O.B Destination, no shipping cost will be funded separately Volume II: Detail Technical Proposal to include the following elements: 1. Specifications of instrumentation to include variance from the brand name 2. Delivery and Installation procedures 3. Schedule 4. Quality Assurance Plan 52.212-2, Evaluation Commercial Items The contract will be awarded to the Lowest Price Technically Acceptable (LPTA) offeror. The technical evaluation will be a determination based on information furnished by the vendor in the submitted proposals. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions. Proposals will be evaluated by adding all Firm-Fixed Price costs for Items 1 and 2. 52.212-3 Offeror Representations and Certifications -- Commercial Items. All quotations from responsible sources will be fully considered. Vendors, who are not registered in the System for Award Management (SAM), prior to award, will not be considered. Vendors may register with SAM by going to www.sam.gov. 52.212-4 Contract Terms and Conditions Commercial Items This clause applies in its entirety and there are currently no addenda to the provision. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items. This clause applies, and the following clauses are incorporated by reference. The following provisions and clauses will be incorporated by reference, and the full text of the references may be accessed electronically at this address: http://farsite.hill.af.mil: 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note). 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (July 2013) (31 U.S.C. 6101 note). 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313). 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (MAY 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). 52.219-28, Post Award Small Business Program Representation (July 2013) (15 U.S.C. 632(a)(2)). 52.222-3, Convict Labor (June 2003) (E.O. 11755). 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212). 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332). 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O.13495). Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. 52.217-8 Option to Extend Services (Nov 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor at least 30 days before the contract expires. All questions must be submitted via email to chanel.d.desilva.civ@mail.mil by 07 April 2015, 3:00 p.m. EDT. SUBJECT LINE: W91ZLK-15-R-0018 Questions from (INSERT COMPANY NAME). All questions will be answered via an amendment to the solicitation on FBO. NO TELEPHONE INQUIRES WILL BE HONORED. Quotations must be signed, dated, and received by 17 April 2015, 3:00 p.m. EST via email to chanel.d.desilva.civ@mail.mil NO TELEPHONE INQUIRES WILL BE HONORED.

Portable handheld 3D Scanning Equipment

Department of the Army, Army Contracting Command | Published August 24, 2016  -  Deadline August 31, 2016
cpvs

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. N/A (ii) The solicitation number is W911QX-16-T-0335. This acquisition is issued as an request for quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-89 effective 14 July 2016. (iv) The associated NAICS code is 334513. The small business size standard is 750. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): Portable handheld 3D Scanning Equipment as listed below:  The Contractor Shall Provide: 1) Handheld 3D Scanner -Two (2) units that meet the following minimum Government specifications: Shall capture textures with resolution of at least 1.3 mp and colors to 24 bits per pixelShall capture with resolutions down to 0.1mmShall maintain 3D accuracy of up to 0.03% over distances of 100cmLight source shall be flash bulb or blue LED (not laser)Angular field of view shall be at least 30° H x 21° WData acquisition speed shall be at least 1 million points per secondUnit weight per unit shall be 1.9 lbs maxInterface shall be USB 3.0 compatibleNo special calibration equipment required 2) Scanner Operating Software Shall output in the following formats: OBJ, PLY, WRL, STL, ASCII, PTX, e57, XYZRGBShall process at many as 40 million triangles per 1 GB of RAMSupported operating systems: Windows 7, 8 or 10 - x64 3) Scanner(s) shall come with hard shell travel case or as an accessory 4) Scanner(s) shall be capable of battery powered operation, supplied as accessory5) 6) Scanner software training and support shall be available from an authorized reseller within 50 miles of APG, MD 7) Post processing software shall be capable of: Input from scanner software in compatible format as aboveProvide advanced tools for mesh editing to high quality watertight polygon modelsProvide advanced tools for creating Nurbs geometry from scan/mesh data into CADOutput shall be compatible with existing Army software packages for human factors analysis  8) Post-processing software training Training and support shall be available from an authorized re-seller within 50 miles of APG, MDTraining shall include use of specified scanner(s) with specific workflows for Army human systems integration analysis 9) Vendor shall supply technical support via email, phone, for a minimum of 1 year and shall be located within 50 miles of APG, MD in case of additional training or support is required Additional requirements: 1. Offeror Information: Offeror shall be current in relevant U.S. Government and DoD procurement systems.2. Offeror Experience: Offeror shall be in the business of providing 3-D scanning equipment and must have done so for at least the past five (5) years.3. Authorization: Offeror shall be an original manufacturer, authorized distributor, or dealer authorized by OEM. (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: N/A (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items is applicable to this acquisition. The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and has the lowest evaluated price of all offers meeting or exceeding the acceptability standards for non-cost factors. The Contracting Officer determines that past performance need not be evaluated because the supplies being purchased are of a low complexity that past performance information would not make a substantial difference. The technical acceptability element of the evaluation will be a determination as to whether the proposed product meets the performance characteristics and specifications in the solicitation. The Technical element of the evaluation shall be based solely on information furnished by the vendor. The Government is not responsible for locating or securing any information, which is not identified in the proposal. To ensure sufficient information is available, vendors must furnish as part of their proposal all descriptive material (such as cuts, illustrations, drawings, or other information) necessary for the Government to determine whether the product meets the performance characteristics and specifications of the requirement. If the offeror proposes to modify a product so as to conform to the requirement of this solicitation, the offeror shall include a clear description of such proposed modifications and clearly mark any descriptive materials to show modifications. Price will be evaluated based on the total proposed price, including options, (if any). (x) Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause: N/A (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: 52.204-7 System for Award Management (July 2013), 52.204-8 Annual Representations and Certifications (Apr 2016), 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013), 52.204-16 Commercial and Government Entity Code Reporting (Jul 2015); 52.204-18 Commercial and Government Entity Code Maintenance (Jul 2015);52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug, 2013), 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011), 52.219-28 Post Award Small Business Program Representation (July 2013), 52.222-3 Convict Labor (June 2003), 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2014), 52.222-21 Prohibition of Segregated Facilities (Feb 1999), 52.222-26 Equal Opportunity (Mar 2007), 52.222-36 Affirmative Action for Workers with Disabilities (July 2014), 52.222-50 Combatting Trafficking in Persons (Mar 2015), 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011), 52.225-13 Restrictions on Certain Foreign Purchases (June 2008), 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications (Dec 2012), 52.232-33 Payment by Electronic Funds Transfer-System for Award Management (July 2013), 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013), 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011), 252.203-7005 Representation Relating to Compensation of Former DoD Officials (Nov 2011), 252.204-7003 Control of Government Personnel Work Product (Apr 1992), 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (Dec 2015), 252.204-0009 Contract Wide: By Fiscal Year (Sep 2009), 252.204-7011 Alternative Line Item Structure (Sep 2011), 252.204-7012 Limitations on the use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (Dec 2015), 252.204-7015 Disclosure of Information to Litigation Support Contractors (Feb 2014), 252.223-7008 Prohibition of Hexavalent Chromium (Jun 2013), 252.225-7000 Buy American Statute-Balance of Payments Program Certificate (Jun 2012); 252.225-7001 Buy American Act and Balance of Payments Program (Dec 2012); 252.225-7048 Export-Controlled Items (Jun 2013), 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Jun 2012), 252.232-7010 Levies On Contract Payments (Dec 2006), 252.244-7000 Subcontracts for Commercial Items (Jun 2013), 252.247-7023 Transportation of Supplies by Sea (Aug. 1992). (xiii) The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): APG-ADL-B.5152.204-4409 ACC - APG Point of Contact (Apr 2011);APG-ADL-B.5152.204-4411 Technical Point of Contact (Dec 2002);APG-ADL-B.5152.216-4407 Type of Contract (Sep 1999);APG-ADL-E.5152.246-4400 Government Inspection and Acceptance (Sep 1999);APG-ADL-G.5152.232-4418 Tax Exemption Certificate (Sep 1999);APG-ADL-H.5152.211-4401Alt I Receiving Room Requirements- APG Alternate I (JAN 2003);APG-ADL-L.5152.203-4440 AMC-Level Protest Program (Jul 2011); 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998);52.252-2 Clauses Incorporated by Reference (Feb 1998);252.211-7003 Item Unique Identification and Valuation (DEC 2013);252.232-7006 Wide Area Workflow Payment Instructions (MAY 2013); (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as: N/A (xv) The following notes apply to this announcement: N/A (xvi) Offers are due on 31 August 2016 by 10:00am Mountain Standard Time (MST) via email to nicole.g.hernandez2.civ@mail.mil, (xvii) For information regarding this solicitation, please contact Nicole Hernandez, nicole.g.hernandez2.civ@mail.mil, (575) 678-4979.
  • 1