Public tenders for electrical in Ethiopia

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!
ElectricalEthiopia

Procurement of Water Pumps (Lot I) and Electrical Generators (Lot II).

UNDP Country Office - ETHIOPIA | Published October 18, 2016  -  Deadline November 1, 2016
cpvs

UNDP Ethiopia Office kindly request you to submit your quotation for supply of Water Pumps (Lot I) and Diesel Electrical Generators (Lot II) as detailed in the RFQ. When preparing your quotation, please be guided by the form attached hereto as Annex 2. Quotations may be submitted on or before November 1, 2016 and via e-mail to the address below:United Nations Development ProgrammeUNDP Ethiopia;ECA OLD BUILDING, AFRICA HALL;Addis Ababaprocurement.et@undp.org Quotations submitted by email must be limited to a maximum of 10MB, virus-free and no more than two email transmissions. They must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation will reach the address above on or before the deadline. Quotations that are received by UNDP after the deadline indicated above, for whatever reason, shall not be considered for evaluation. If you are submitting your quotation by email, kindly ensure that they are signed and in the .pdf format, and free from any virus or corrupted files.Download RFQ Form from the following link:http://procurement-notices.undp.org/view_notice.cfm?notice_id=33652Procurement Reference No. ETH/RFQ/2016/022.Quotation Submission date: 01 November 2016 at 10:00am

Automatic laser die cutting,grooving, perforating and engraving on various material machine

United Nations Secretariat | Published March 9, 2017
cpvs

It is anticipated that the United Nations Economic Commission for Africa (UNECA) in Addis Ababa, Ethiopia will shortly be issuing an "Invitation to Bid" to procure Automatic Laser Die Cutting from a contractor/s with valid license. Hence, the UNECA hereby request qualified contractor/s to express their interest for the supply of Automatic Laser Die Cutting to the UNECA. Interested firms will be invited to the tender by “Invitation to Bid” (ITB) at a later stage. This tender envisages selection of a single contractor to supply Automatic Laser Die Cutting Machine. Please note that the UNECA is precluded from entering into contract with a firm that is not fully registered with UNGM. Those interested in responding to this invitation but not currently fully registered as vendors with UNGM, are encouraged to register before submission of the bid. Further details may be obtained by visiting https://www.ungm.org/Vendor/Registration. In order to be eligible for UN Registration, please make sure to declare in writing the Prerequisite for Eligibility criteria itemized from A-F as contained in EOI instruction attached. Those interested should write to the above-mentioned e-mail address or fax number to submit their “expression of interest” by the deadline of 08 April 2017. Technical Specifications Laser Source 30 W (Sealed CO2 Laser, air cooled) Work Area 860 X 610 mm Adjustable power Control 0 – 100 % Product thickness 40 mm Adjustable Speed control 0.1 – 100 % Speed Max 2.032mm / sec Graphic Design Software Machine must be able to work with PC with Windows OS and Vector oriented (CorelDraw or Adobe Illustrator) PRINTER Interface : Parallel and USB 2.0 Power 240v. 50/60 hz Electrical Power Input: KVA 2.0 Thermal rating BTU/h 6,8creasing, perforating and engraving

Procurement of Kitchen Equipments for United Nations Conference Centre- Addis Ababa

United Nations Secretariat | Published February 9, 2015  -  Deadline March 6, 2015
cpvs

The United Nations Economic Commission for Africa (UNECA) in Addis Ababa, Ethiopia hereby seeks interested and qualified vendors to provide Kitchen Equipments for the United Nations Conference Centre (UNCC)- Addis Ababa as specified below: 1. Potato Peeler, Container Capacity 19 Kg (380 Volt, 50Hz, 1Kw) 2. Electric fry-top: one Ribbed and one flate plate (380 Volt, 50Hz, 12Kw) 3. Electrical Cooking Ranges (380 volt, 50 Hz, 13Kw) 4. 900 Electric Fryer (380 V, 50 Hz, 24Kw) 5. 900 Electric Tilting bratt pan (380 V, 50 Hz, 18Kw) 6. Rectangular electricity heated boiling pan (380 V, 50 Hz, 18Kw) 7. Round electrically heated jacketed boiling pans (380 V, 50 Hz, 15Kw) 8. Auomatic pasta cooker (380 V, 50 Hz, 33Kw) 9. Vegetable Dryer, Capacity 40 Litre (380 V, 3PH, 50Hz) Vendor who express their interest will be invited to participate in a tender through "Invitation to Bid" (ITB). This tender will envisage the selection of a single firm to procure the above mentioned equipments with the described specifications that are detailed in the ITB. The UNCC requires a 3 year Long Term Agreement (LTA) with the qualified vendor to provide similar equipment and spare parts when or if required. Please note that the UNECA is precluded from entering into contract with a firm that is not fully registered with UNECA. Those interested in responding to this invitation but not currently fully registered as vendors with UNECA, are encouraged to register before submission of the bid. Further details may be obtained by visiting https://www.ungm.org/Vendor/Registration. In order to be eligible for UN Registration, please make sure to declare in writing the Prerequisite for Eligibility criteria itemized from A-E as contained in EOI instruction attached. Those interested should write to the above-mentioned e-mail address or fax number to submit their “expression of interest” by the deadline of 6 March 2015

Supply, Installation, and Commissioning of carpets at the Conference Service Section of UNECA

United Nations Secretariat | Published September 23, 2014  -  Deadline October 31, 2014
cpvs

The United Nations Economic Commission for Africa (UNECA) in Addis Ababa, Ethiopia hereby seeks a contractor which will undertake the stated below - dismantle existing furniture, fixture and carpets that cover an approximate area of 5, 500M2 with a potential to increase, - Supply related electrical materials and carpets as per UNECA specification, - Supply for a potential carpet renovation requirement of UNECA's executive office, Vendors who express their interest will be invited to participate in a tender through formal solicitation document of which the detalis regarding the specifications and pertinet matters shall be described in the bid document. UNECA is precluded from entering into a contract with a firm that is not fully registered with United Nations Global Market Place (UNGM). Only those vendors who are registered or provisionally registered or have started their registration process in UNGM will be eligible to receive the formal solicitation document. UNGM web site:- https://www.ungm.org. UNECA reserves the right to send the solicitation document to vendors who were identified through additional market research or others means to source the UNECA requirements. This Request for Expression of Interest (REOI) does not constitute a soliciation, responding to the REOI does not guarantee that the vendor will be invited to participate in the soliciation when issued; and the UNECA reserves the right to change / modify or cancel the procurement at any time during the REOI process or the formal solicitation process. Those interested should write to the above-mentioned e-mail address or fax number to submit their “expression of interest” by the deadline of 31 October 2014.

Spare parts for MGE Galaxy 7000, 160KVA UPS specific to APC by Schneider Electric Products

United Nations Secretariat | Published November 3, 2014  -  Deadline December 3, 2014
cpvs

The United Nations Economic Commission for Africa hereby seeks interested and highly qualified local and international firms for supply of spare parts for MGE Galaxy 7000, 160KVA UPSs. A sample of the items requested is herebelow. Product Family Spare item Spare description MGE Galaxy 7000 0J-0P3082EB BOARD GALAXY7000 EXTT MGE Galaxy 7000 0J-0P3087EM/0J-0P3087EP BOARD GALAXY7000 DIGIT MGE Galaxy 7000 0M-3460066800SE IN/OUT AC CAPS G7K 200 KVA- SPARE PART

Provision of Electromechanical operation and maintenance Services

United Nations Secretariat | Published April 20, 2017
cpvs

The United Nations Economic Commission for Africa (UNECA) is located in Addis Ababa, Ethiopia is seeking Expression of Interest (EOIs) from qualified companies with the required experties and experience for the provision of Electromechanical operation and maintenance services. The main objective of this project is to have an effective operation and maintenance of all electromechanical equipment, machines and other related systems in the compound, which will result in smooth and uninterrupted operation of the installations 24 hours per day/7 days per week. The electromechanical services will incorporate HVAC, hot and cold water, firefighting system, sanitary and storm drainage system, plumbing fixtures, electrical panels and switchgears, generator sets, UPS, and provide ECA technician engineer assistance on fire alarm systems, audiovisual conference facilities, building automation systems support and the like. Interested firms will be invited to a “Request for Proposal” (RFP) stage. This EOI will determine the group of firms that will receive the RFP for the services. UNECA reserves the right to change or cancel the requirement at any time during the EOI/ or solicitation process. Thus, submitting a reply to this EOI does not automatically guarantee that your company will be considered for receipt of the solicitation when issued. The RFP and any subsequent commitment to contract will be issued in accordance with UN rules and regulations. Please note that the UNECA is precluded from entering into contract with a firm that is not registered with UNGM. Those interested in responding to this EOI but not currently registered as vendors with UNGM, are encouraged to register before submission of the EOI in the United Nations Global Market Place (UNGM). Further details may be obtained by visiting https://www.ungm.org/Vendor/Registration.In order to be eligible for UN Registration, please make sure to declare in writing the Prerequisite for Eligibility criteria itemized from A-E as contained in EOI instruction attached. Interested firms should submit a fully completed Vendor Response Form to the above listed email address or fax number on or before the closing date of the EOI i.e. 11 May 2017.

Africa Hall – Retail Decant Early Works

United Nations Secretariat | Published August 18, 2016
cpvs

United Nations Economic Commission for Africa (ECA) located in Addis Ababa, Ethiopia is seeking Expressions of Interest (EOIs) in order to pre-qualify companies with the required expertise and experience to demolish existing tenant works and carry out new refurbishment works to provide the existing tenants with permanent or temporary relocation space during the renovation of the Africa Hall building. ECA intends to appoint a single vendor for these works. This project is for the demolition of existing tenant works and new refurbishment works to facilitate commercial tenancies within both the Nile and Congo Buildings at the UNECA campus in Addis Ababa. The total area of the works, including circulation and foyer, is approximately 1800m2. The works in the Congo building are located predominantly on the ground floor and minor areas of the basement and level one. The remaining seven (7) stories of the Congo Building will remain operational throughout the construction works. The works in the Nile building are predominantly on ground floor and level one (1), with minor areas of work required on lower ground and roof levels. Access to operational areas of the lower ground must be facilitated throughout the duration of the construction works. Levels ground and one (1) will be unoccupied for the construction period. The works generally are to provide 'hard' fitouts of new retail tenant spaces for the existing tenants located within the Africa Hall Building. NB: The 'soft' tenancy fitouts (furniture, fixtures and equipment) do not form part of the project scope. At the substantial completion of this project, retail tenants will decant into the newly refurbished Congo and Nile buildings, enabling the Africa Hall renovation project to commence. The hard fitout works include (but are not limited to) structural upgrades, lighting, electrical, communication, security, mechanical, hydraulic engineering upgrades, new external and internal aluminium façade partitioning, linings and fire safety upgrades. Minor civil site works are required to facilitate services connections with the existing site infrastructure. Interested bidders are informed that for the implementation of the Project, UNECA has set up a dedicated management team/unit. A design firm has been appointed to provide all technical services related to the design and construction management, including work supervision and quality control. Those interested should write to the above-mentioned e-mail address or fax number to submit their “expression of interest” by the deadline of 30 September 2016.

Recruitment of National consultant for compiling and archiving hydrological data sets at the Ministry of Water, Irrigation and Electricity of Ethiopia (Re-Advertisement)

UNDP Country Office - ETHIOPIA | Published October 17, 2016  -  Deadline November 3, 2016
cpvs

The exiting situation indicates that the data are not handled well and not retrieved easily as required. Hence, when the database management activity is implemented, those easily but tedious data handling problems would be resolved and data will be easily retrieved for later uses. This would help in the proper handling of the valuable and expensive hydrological datasets which would be used for different purposes and studies such as water resource, dam management, irrigation, water supply, disaster risk management, etc. The datasets are collected from the twelve river basins many years back and shall serve as a basis for the MoWIE and the government of Ethiopia to decide on feasibility of many major projects....Application Instruction:Download both TOR and IC Proposal Submission Form from the following link: http://procurement-notices.undp.org/view_notice.cfm?notice_id=33623;Strictly follow the instructions indicated in the IC Proposal Submission Form uploaded hereto; andGroup of Individuals and/or Firms are not eligible for this consultancy assignment (open only for individual consultant)Documents Required:The following proposals must be prepared as per the IC Proposal Submission Instructions. The Proposals shall be submitted on or before application deadline November 3,2016 via UNDP Ethiopia Secured mail address: procurement.et@undp.orgTechnical Proposal in pdf under file name:ETHC-IC-2016-081 – TP - [insert your name];Financial Proposal in pdf under file name: ETH-IC-2016-081– FP - [insert your name];Please note that these proposals shall be submitted to the designated secured email into two files but in one email unless both Files are Greater than 9MB file size.Important Note:A candidate applying only by uploading CV to this job site will not be considered. Instead, both Technical and Financial Proposals shall be submitted to UNDP Secured email: procurement.et@undp.orgThose prospect consultants who fail to submit both Technical and financial proposals as per the standard format and to the designated secured email will not be further considered for evaluation.Please group all your documents into single PDF document as the system only allows to upload maximum one document.While submitting your proposals to procurement.et@undp.org be sure your email subject line is ETH-IC-2016-081 in order to let our Office easily locate your respective proposals from secured email and be considered in subsequent evaluations.

Recruitment of National (Technical Advisor ) consultant for the provision of support for data collection for existing data set by Automation and Telemetry system at the Ministry of Water, Irrigation and Electricity of Ethiopia (Re-advertisement)

UNDP Country Office - ETHIOPIA | Published October 17, 2016  -  Deadline November 3, 2016
cpvs

The Technical support of data collection For Existing data set by Automation and telemetry system shall be taken as part of the project Strengthening Climate Information and Early Warning Systems in Africa for Climate Resilience Development and Adaptation to Climate Change in Ethiopia. The project is supported by the UNDP as part of the Strengthening Climate Information and Early Warning Systems in Africa.The directorate would strongly like to improve the current information system Systems which is very important for the water resource development strategies and early warning approaches. Application Instruction:Download both TOR and IC Proposal Submission Form from the following link: http://procurement-notices.undp.org/view_notice.cfm?notice_id=33625Strictly follow the instructions indicated in the IC Proposal Submission Form uploaded hereto; andGroup of Individuals and/or Firms are not eligible for this consultancy assignment (open only for individual consultant)Documents Required:The following proposals must be prepared as per the IC Proposal Submission Instructions. The Proposals shall be submitted on or before application deadline November 3, 2016 via UNDP Ethiopia Secured mail address: procurement.et@undp.orgTechnical Proposal in pdf under file name:ETHC-IC-2016-082 – TP - [insert your name];Financial Proposal in pdf under file name: ETH-IC-2016-082– FP - [insert your name];Please note that these proposals shall be submitted to the designated secured email into two files but in one email unless both Files are Greater than 9MB file size.Important Note:A candidate applying only by uploading CV to this job site will not be considered. Instead, both Technical and Financial Proposals shall be submitted to UNDP Secured email: procurement.et@undp.orgThose prospect consultants who fail to submit both Technical and financial proposals as per the standard format and to the designated secured email will not be further considered for evaluation.Please group all your documents into single PDF document as the system only allows to upload maximum one document.While submitting your proposals to procurement.et@undp.org be sure your email subject line is ETH-IC-2016-082 in order to let our Office easily locate your respective proposals from secured email and be considered in subsequent evaluations.

Support for Capacity Dev't of the AUC - P126848

African Union Commission | Published April 18, 2016  -  Deadline April 28, 2016
cpvs

Individual Consultant For Consultancy Services To Provide Architectural And Engineering Services For The African Union Representation To The United Nations Office?s Conference Rooms In New York (tor) REQUEST FOR EXPRESSION OF INTEREST(ROIE) Individual Consultant for Consultancy Services to Provide Architectural and Engineering Services for the African Union Representation to the United Nations Office'sConference Rooms in New York (TOR) SUPPORT FOR CAPACITY DEVELOPMENT OF THE AFRICAN UNION COMMISSION AND OTHER AFRICAN UNION ORGANS PROJECT(P126848) Grant No. IDAH9390 Reference No.: AUC/CDP/IC/03-2016 The African Union Commission has received financing from the World Bank toward thecost of the "Support for Capacity Development of theAfrican Union Commission and Other African Union Organs Project (P126848)", andintends to apply part of the proceeds for consulting services for the captioned assignment. Development Objective of the Project (P126848): Strengthen African Union Commission's capacity to facilitate economicdevelopment results and transformation through enhanced institutional efficiency. This will be achieved by enhancing the AUC'sinternal humanresources and management systems, and supporting result-oriented external partnerships and collective actionsdesigned to enhance the implementation of regional economic development initiatives in priority areas (e.g. regional trade, energy,infrastructure, governance, natural resource management) for the benefit of African Union member states, the Regional EconomicCommunities and African citizens. Background The African Union, established as a unique Pan African continental body, ischarged with spearheading Africa's rapid integration and sustainable development by promoting unity, solidarity, cohesion andcooperation among the peoples ofAfrica and African States as well as developing a new partnership worldwide. The Institution hasthe ambition to further enhance its effectiveness and efficiency to constantly adjust its operations to the evolving needs of theAfrican citizens and drive the Continent's integration and the institutional transformation process, a prerequisite fororganization capacity and systems enhancement, which is required to support it. In support of the AUC's 2014 strategic plan and Agenda 2063, essentialelements for success ofthe AU Vision, the African Union Commission has received a grant fromthe International DevelopmentAssociation (IDA) to strengthen and develop its Capacity and other African Union Organs.   In an effort to strengthen capacity of AUC and its organ, the Administrations andHuman Resources Management Directorate (AHRMD) of AUC is undertaking several capacity development initiatives to modernize itssystems that enable it to deliver on its mandates and vision of being "An integrated and prosperous Africa at Peace withitself". Accordingly, AHRMD wishes to modernize one of the Conference Rooms of AURepresentation to theUN in New York, USA with modern Multimedia Conferencing System and refurbishing to accommodate moderntechnology for Member States uses.  The modern Digital ConferenceSystem will enhance the Commission's capacity in hosting and undertaking meetings by Member States with the expected businessstandards. It will also improve the existing information systems by providing complete and secure information storage, retrievingand sharing mechanisms.  Thus, modern digitalconference systems will meet the expectation of Member States by giving convenient platform to attend and undertake meetings. The current conference system, which is 13 years ago, is outdated and theequipment are malfunction and some are broken.  The model and makeof the product which is beingcurrently used is not manufacture by the manufacturer and the productline is discontinued.   The Commission is not ableto replace the productsine the manufacturer does not manufacture such product line anymore. The system has very week audio visual quality and get interrupted while session.  The screens are very old model with low quality outputs.The lighting system is outdated and mostly the room has a very low brightness and is notcompletely convenient for users toread.  In addition, the furniture used in themeeting room are very old and are not convenient for use for longer meeting sessions. Some of the furniture are broken and are notsuitable for use.   The roof has nosealing and the installed electromechanical and sanitary system are visible on the roof that leads the sound is the room is notabsorbed within the room. Objective of theAssignment The objective of this assignment is to undertake designing, supervision and administration forexecution of modernizing the African Union Representation to the United Nation Conference Room in New York, USA, with modernMultimedia Conferencing System and refurbishing to accommodate modern technology for Member Statesuses Scope of the Assignment To attain the specific objective, the consultant will carry out the below major tasks in three major stages; i, programmingand drafting schematic design, ii, design and develop final requirements and biding documentation, and iii, supervision andadministration of supply, installation and commission of work, under the supervision of the AHRM Director, who is a project managerunder this assignment.   The consultancy service will cover AURepresentation Office in New York conference room. The assignment doesn't require traveling to other AU offices outsideNewYork. The existing conference room was built in 2003. The capacity of the room is 116 participants.  The building is located 346 East 50th Street, 10017,New York, NEW YORK, and the conferenceroom is on 5th floor. The Consultant would be selected based on the following minimum educational andexperience criteria stated below: Architectural and engineering services (acoustics,audio visual, interpretation equipment and systems) and (Mechanical, Electrical and Plumbing) MEPValid and relevant practicing professional licenceAdvanced University degree in Engineering RelatedFieldsSimilar nature and complexity and who has done thedesign and construction administration'Five years' experience in specifying requirement,designing and preparation of biding document for an audio/visual supply and installation contracts.  Five years' experience in supervision and contractadministration of such audio/visual supply and installation contracts. Proven confirmation of documentation for completeset of architectural and engineering documentation for permitting and construction purposes. The African Union Commission now invites eligible IndividualConsultants to indicate their interest in providing the Services.  Interested Individual Consultants must provide information demonstrating that he/she has the required qualifications and relevantexperience to perform theServices.  Consulting firms may proposeindividual consultant, but only the experience and qualifications of individual shall be used in the selection process, and thathis or her corporate experience shall not be taken into account, and the contract would be signed with the proposedindividual. This Call for Expression of Interest will lead to the preparationof a Short List of qualifiedIndividual Consultants. For evaluation of the expressions of interest the following criteria will be applied: a)            Relevant Education Qualification and Relevant Training (25points); b)           Experience Related to the Assignment(65 points); c)            Relevant experience working in the region, (10 points) The attention of interested Individual Consultants is drawn to paragraph 1.9 of theWorld Bank's Guidelines: Selection and Employment of Consultants under IBRD Loans and IDA Credits & Grants by World BankBorrowers dated January 2011.   The Guideline is available onwww.worldbank.org/procure.  "ConsultantGuidelines", setting forth the World Bank's policy on conflict of interest. A Consultant will be selected in accordance with the with the procedures set out inthe World Bank's Guidelines: Selection and Employment of Consultants under IBRD Loans and IDA Credits & Grants by World BankBorrowers dated January 2011. Further information can be obtained at the address below during office hours8:00-13:00hrs and 14:00-17:00 hours Local Time. Expressions of interest must be delivered in a written form to the address below (bymail, or by fax, or by e-mail) not later than 15:00 hours local time, April 28, 2015. African Union Commission, Attn: Carine Toure Yemitia Head of Procurement Travel and Store Division Building C, Room 327 P.O.Box 3243, Roosevelt Street Addis Ababa, Ethiopia Tel: +251 (0) 11 551 7700 ? Ext 4305 Fax: +251 (0) 11551 0442; +251 11-551-0430 E-mail: tender@africa-union.org
  • 1