Public tenders for electrical in Ostrava Czech Republic

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

Electric buses

Dopravní podnik Ostrava a.s. | Published March 4, 2017  -  Deadline April 26, 2017
cpvs
34144910, 71356300, 71320000, 31600000

Subject VZ:

a) Delivery (2) pieces of new single-cell electric bus, the low-editing, powered by electrical energy stored in the traction batteries for public transport;

b) Delivery (2) pieces of mobile charging kit for emergency charging traction batteries and balancing on the supplied single-cell electric bus;

c) the supply, installation and commissioning of one (1) piece of the charging station designed for automatic Boost traction batteries supplied by single-cell electric bus;

d) project documentation charging station in the merged stage for zoning and building permits including itemized budget;

e) delivery of further performance, which is closely specified in the tender conditions, especially in the Purchase Agreement, which is Annex no. 2 W;

f) design ZASKO. Sponsor operators and workers;

g) construction works related to the construction of charging tent. Closer to ZD.

Electric buses

Dopravní podnik Ostrava a.s. | Published February 10, 2017  -  Deadline April 19, 2017
cpvs
34144910, 71356300, 71320000, 31600000

Subject VZ:

a) Delivery (2) pieces of new single-cell electric bus, the low-editing, powered by electrical energy stored in the traction batteries for public transport;

b) Delivery (2) pieces of mobile charging kit for emergency charging traction batteries and balancing on the supplied single-cell electric bus;

c) the supply, installation and commissioning of one (1) piece of the charging station designed for automatic Boost traction batteries supplied by single-cell electric bus;

d) project documentation charging station in the merged stage for zoning and building permits including itemized budget;

e) delivery of further performance, which is closely specified in the tender conditions, especially in the Purchase Agreement, which is Annex no. 2 W;

f) design ZASKO. Sponsor operators and workers;

g) construction works related to the construction of charging tent.

Closer to ZD.

Making corrections (plumbing and heating, electrical, locksmith and glazier and minor plumbing work) in residential buildings owned by WMO, city district Ostrava-Jih

Statutární město Ostrava, městský obvod Ostrava-Jih | Published March 13, 2017
Winner
TOKKRA Servis s.r.o.
cpvs

Public contract on combined services of electricity supply for the City of Ostrava and municipal organizations for 2017

Statutární město Ostrava | Published December 16, 2016
Winner
Amper Market, a.s.
cpvs
09310000

Composite services of electricity supply for the University of Ostrava 2017

Ostravská univerzita | Published December 14, 2016
Winner
Enwox Energy s.r.o.
cpvs

Electricity

Severomoravské vodovody a kanalizace Ostrava a.s. | Published December 20, 2016
Winner
Amper Market, a.s.
cpvs
09310000

Power supply electricity for premises contracting authority specified in the tender documents. Validity of deliveries to 31 December 2018.

Power supply electricity for SmVaK Ostrava as in 2017 and 2018 respectively.

Power supply of electricity in the years 2017 - 2018 for SmVaK Ostrava as

Severomoravské vodovody a kanalizace Ostrava a.s. | Published December 19, 2016
Winner
Amper Market, a.s.
cpvs
09310000

Electric buses

Dopravní podnik Ostrava a.s. | Published March 15, 2017  -  Deadline May 3, 2017
cpvs
34144910, 71356300, 71320000, 31600000

Subject VZ:

a) Delivery (2) pieces of new single-cell electric bus, the low-editing, powered by electrical energy stored in the traction batteries for public transport;

b) Delivery (2) pieces of mobile charging kit for emergency charging traction batteries and balancing on the supplied single-cell electric bus;

c) the supply, installation and commissioning of one (1) piece of the charging station designed for automatic Boost traction batteries supplied by single-cell electric bus;

d) project documentation charging station in the merged stage for zoning and building permits including itemized budget;

e) delivery of further performance, which is closely specified in the tender conditions, especially in the Purchase Agreement, which is Annex no. 2 W;

f) design ZASKO. Sponsor operators and workers;

g) construction works related to the construction of charging tent. Closer to ZD.

Electric buses

Dopravní podnik Ostrava a.s. | Published April 6, 2017  -  Deadline May 10, 2017
cpvs
34144910, 71356300, 71320000, 31600000

Subject VZ:

a) Delivery (2) pieces of new single-cell electric bus, the low-adjustment, powered by electrical energy stored in the traction batteries for public transport;

b) Delivery (2) pieces of mobile charging kit for emergency charging traction batteries and balancing on the supplied single-cell electric bus;

c) the supply, installation and commissioning of one (1) piece of the charging station for the automatic Boost traction battery supplied to single-electric bus;

d) project documentation charging station in the merged stage for zoning and building permits, including itemized budget;

e) the supply of further filling, which is more closely specified in the specifications, in particular in the sales contract which is Annex no. 2 W;

f) Zask embodiment. Sponsor operators and workers;

g) construction works related to the construction of charging tent. Closer to ZD.

Electricity and gas for ČPZP

Česká průmyslová zdravotní pojišťovna | Published January 30, 2017
Winner
Pražská plynárenská, a.s.
cpvs
09310000

electric supply

Vysoká škola báňská – Technická univerzita Ostrava | Published January 6, 2017
Winner
TRIMR s.r.o.
cpvs
31210000

Making corrections (plumbing and heating, electrical, locksmith and glazier and minor plumbing work) in residential buildings owned by WMO, city district Ostrava-Jih

Statutární město Ostrava, městský obvod Ostrava-Jih | Published January 24, 2017
cpvs

Trolleybuses

Dopravní podnik Ostrava a.s. | Published December 7, 2016  -  Deadline January 3, 2017
cpvs
34622300, 71356300, 22472000, 44510000, 22473000

Every part of the public contract will be evaluated separately.

1st part:

a) Supply of 2 pieces of new low-floor trolleybuses in dvoučlánkových adjusting drive on electricity from overhead lines, manufactured and delivered according to specification subject of performance, incl. equipment and requirements specified in the contract conditions.

I. Agreement.

Draft purchase agreement (the "Agreement").

I. Agreement.

I. Agreement.

I. Agreement.

I. Agreement.

I. Agreement.

III contract

Part 2:

a) Supply of 10 pieces of new single-cell low-floor trolleybuses in modifying powered electricity from overhead power lines and electrical energy stored in the traction batteries for use during operation without connection to the trolley line, manufactured and delivered according to specification subject of performance, incl. equipment and requirements specified in the contract conditions.

I. Agreement.

I. Agreement.

I. Agreement.

I. Agreement.

I. Agreement.

III. contracts

More detailed specification subject of performance is given in the tender documents and annexes.

Air filters

OKK Koksovny, a.s. | Published November 29, 2016  -  Deadline December 14, 2016
cpvs
42514310, 51500000, 51100000, 45231112

The project "Reconstruction of dedusting technology units sorting coarse and fine screening plants coke OKK, as, Svoboda Coking to reduce fugitive emissions" is an ecological project. The aim of this contract is a significant reduction of fugitive emissions of air pollution operations coarse and fine screening plants coke (HTK, JTK) and at the same time improving the health conditions of its employees. The Contracting Authority intends to increase the efficiency of dust removal of at least 30%, which will reduce the amount of fugitive emissions and traffic HTK JTK of at least 24,500 kg / year. Scope of delivery - complete dismantling of the existing scrubbers, incl. dismantling electric - complete dismantling of the existing exhaust air distribution systems - Installation of new dry scrubbers with output values ​​of dust in the air mass max. 5 mg / m³. - Installation of new exhaust air traffic routes with consistently adding exhaust hood in all places where dust is created - new transport routes equipped with automatically switchable flaps for setting the optimal path of air suction only currently active sites. Paths set according to possible variations based on production needs. - The flaps operate automatically based on the chosen technological routes of transported material connected to the existing control system centers. - Install new control system and instrumentation - Install a new source of compressed air quality needed for regeneration separators. - Install the evacuation of the collected dust - Solve the problem with moisture exhausted air and dust sucked, especially at low outdoor temperatures. - Implement the necessary minor construction work - an optimum coating system - Work will be performed in operation centers - The work process the project documentation, which will include a portion of mechanical, electrical, instrumentation and construction. - The work to deliver all the documents necessary for its safe operation. For more details, see ZD.

ZDS HA DIN MODERNIZATION electrical equipment and measuring SOFTHERM - SIEMENS

Veolia Energie ČR, a.s. | Published November 29, 2016
cpvs

The electricity supply in 2017

Ostravské vodárny a kanalizace a.s. | Published November 18, 2016
Winner
ENWOX ENERGY s.r.o.
cpvs
09310000

Modernization of electrostatic precipitators on Sinter Plant North - technology delivery / Modernization of electrostatic precipitators at the agglomeration Sever - delivery technology

ArcelorMittal Ostrava a.s. | Published August 30, 2016
cpvs

The subject of the public contract is the modernization of electrostatic precipitators at the agglomeration north. It will be made for upgrading existing electrostatic precipitators, which are already 20 years old and therefore outdated and worn. Modernized will internals EO, supply and management. Electrostatic modernization will reduce the consumption of electrical energy for their operation and EO is adjusted so that the vacuum sintering belts may in the future operate with a higher vacuum than it is now. The selected contractor will design and deliver technological equipment and components for modernization projects. The supplier also draw up project documentation, which will be used for the installation of the supplied technology for dismantling work and subsequent operation. Technology supplier will provide supervision during erection, dismantling and commissioning. Selecting a supplier of assembly and disassembly, repair and reinforcement pipe (not the subject of this tender procedure) is performed later only on the basis of other independent technical conditions and according to the project documentation developed by the vendor of choice for technology modernization. A detailed description of the subject of a detailed technical specification in the tender dossier and its annexes. Continued point III.2.3 Technical capacity: b) Affirmation that the contractor is able to deliver complementary technology and equipment with the following parameters: i) dust emissions from one line EO maximum of 250 mg / Nm3 dry gas containing 35% sodium chloride in the entry of dust; ii) the total energy consumption for one new EO system covering all consumption within the interface of the project (in addition to the existing evacuation of dust) is less than 302 kWh / one EO

Calibrator electric power and energy

Elvac a.s. | Published August 26, 2016
cpvs

The subject of the tender is a laboratory instrument for research and development in the field of control systems for the energy industry. We require delivery calibrator DC / AC power (DC / AC voltage and current sources) for testing developed electronic control systems. The appliance must be delivered to the desktop / laboratory version with power from the distribution of low voltage AC 230 V / 50 Hz.

Software equipment

TEMEX , spol. s r. o. | Published August 26, 2016
cpvs

The contract is the purchase of software for office work, modeling CAD, CAM system for CNC machines and design software for designing in electrical engineering. Delivery and installation of software, are specified in Annex no. 4 are included and all necessary accessories. Sponsor does not allow partial performance.

Air filters

OKK Koksovny, a.s. | Published November 15, 2016  -  Deadline November 29, 2016
cpvs
42514310, 51500000, 51100000, 45231112

The project "Reconstruction of dedusting technology units sorting coarse and fine screening plants coke OKK, as, Svoboda Coking to reduce fugitive emissions" is an ecological project. The aim of this contract is a significant reduction of fugitive emissions of air pollution operations coarse and fine screening plants coke (HTK, JTK) and at the same time improving the health conditions of its employees. The Contracting Authority intends to increase the efficiency of dust removal of at least 30%, which will reduce the amount of fugitive emissions and traffic HTK JTK of at least 24,500 kg / year. Scope of delivery - complete dismantling of the existing scrubbers, incl. dismantling electric - complete dismantling of the existing exhaust air distribution systems - Installation of new dry scrubbers with output values ​​of dust in the air mass max. 5 mg / m³. - Installation of new exhaust air traffic routes with consistently adding exhaust hood in all places where dust is created - new transport routes equipped with automatically switchable flaps for setting the optimal path of air suction only currently active sites. Paths set according to possible variations based on production needs. - The flaps operate automatically based on the chosen technological routes of transported material connected to the existing control system centers. - Install new control system and instrumentation - Install a new source of compressed air quality needed for regeneration separators. - Install the evacuation of the collected dust - Solve the problem with moisture exhausted air and dust sucked, especially at low outdoor temperatures. - Implement the necessary minor construction work - an optimum coating system - Work will be performed in operation centers - The work process the project documentation, which will include a portion of mechanical, electrical, instrumentation and construction. - The work to deliver all the documents necessary for its safe operation. For more details, see ZD.