Call +44 800 9755 164

Public tenders for electrical in Winnipeg Canada

Find all Electrical tenders in the world.
Finding business opportunities has never been easier.

Results for electrical. Make a new search!

ELECTRICAL SERVICES - Brandon Research Centre

Agriculture & Agrifood Canada | Published April 1, 2015
Winner
Dave Chambers Electric Ltd.
cpvs

To supply all materials, equipment, labour and supervision necessary to perform electrical regular and preventative maintenance and electrical modifications and additions at Brandon Research Centre (BRC). Brandon Research Centre consists of a lab complex consisting of approximately 7500 square meters and at numerous other Centre Buildings. Wiring consists of systems at 120 V single phase to 600V 3 phase, low voltage control systems, fire alarms systems, communication wiring, heating, motors, contractors, MCC’s and specialized laboratory equipment. The list of wiring and equipment is “general” only and does not specify all equipment. It is to be used as a guide to the complexity of the buildings and their equipment.

ELECTRICAL SERVICES - Brandon Research Centre

Agriculture & Agrifood Canada | Published January 29, 2015  -  Deadline November 3, 2015
cpvs

To supply all materials, equipment, labour and supervision necessary to perform electrical regular and preventative maintenance and electrical modifications and additions at Brandon Research Centre (BRC). Brandon Research Centre consists of a lab complex consisting of approximately 7500 square meters and at numerous other Centre Buildings. Wiring consists of systems at 120 V single phase to 600V 3 phase, low voltage control systems, fire alarms systems, communication wiring, heating, motors, contractors, MCC’s and specialized laboratory equipment. The list of wiring and equipment is “general” only and does not specify all equipment. It is to be used as a guide to the complexity of the buildings and their equipment.

Generators and Generator Sets, Electrical - Repair

Public Health Agency of Canada | Published January 11, 2017
Winner
Cummins Western Canada
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Exclusive Rights GSIN Description:  Generators and Generator Sets, Electrical - Repair Quantity: 1

Electrical Maintenance Services, Iqaluit, Nunavut

Public Works & Government Services Canada | Published June 22, 2015  -  Deadline July 15, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: Yes Nature of Requirements: Electrical Maintenance Services, Iqaluit, Nunavut EW999-152044/A Fagan, Mike Telephone No. - (204) 983-6103 Fax No. - (204) 983-7796 Email: mike.fagan@pwgsc-tpsgc.gc.ca Public Works and Government Services Canada (PWGSC) has a requirement to establish a Regional Individual Standing Offer (RISO) for the provisions of all labour, materials and equipment required to perform electrical maintenance including upgrades and replacement to existing, new components, removal of existing, inspections services, etc, to Federal Government facilities and building equipment located in Iqaluit, NU, on an "as required" basis during the period of the Standing Offer. Proponents are hereby informed that this procurement is subject to the Nunavut Land Claims Agreement, Article 24 - Government Contracts. The period of the Standing Offer will be for a two (2) year period with the ability to extend for an additional three (3) - one (1) year extension periods. This procurement contains MANDATORY requirements. Failure to comply will result in rejection of your tender. THIS DOCUMENT CONTAINS A SECURITY REQUIREMENT For further instructions please consult Part 6, Security and Insurance Requirements and Part 7, Article 2, Security Requirement. Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, and are to ensure they are addressed in the submitted bid. Firms intending to submit bids on this project should obtain bid documents through the GETS service provider on the Government of Canada Web site at http://buyandsell.gc.ca/procurement-data/tenders. Firms that obtain bid documents from a source other than the official site run the risk of not receiving a complete package. Complete specifications and details are included in attached Request for Standing Offer. Estimated dollar amount: $105,000.00 CAD, per year. (Including GST) The Crown retains the right to negotiate with suppliers on any procurement. The requirement is subject to the provisions of the Agreement on Internal Trade (AIT). Documents may be submitted in either official language of Canada. Closing Date: July 15, 2015, 14:00 CDT. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

High Voltage Electrical Maintenance Services, 17Wing DND Facilities, Winnipeg, Manitoba

Department of National Defence | Published September 22, 2015  -  Deadline October 13, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: High Voltage Electrical Maintenance Services, 17Wing DND Facilities, Winnipeg, Manitoba W4M00-14C404/A Thompson, Valerie Téléphone : 204-509-0349 Télécopieur : 204-983-7796 Courriel : valerie.thompson@tpsgc-pwgsc.gc.ca Request for a Regional Individual Standing Offer to supply all materials, equipment, labour, transportation, and supervision necessary to perform the following work, as more fully described in the specification, at 17 Wing DND facilities, Winnipeg, Manitoba. .1 Ensure that the following equipment and components are serviceable and in good working order: The electrical distribution network and its overhead and underground components. Replace and realign hydro poles. Install and/or replace overhead or underground high tension power lines. Install and/or replace guy wires, as needed. Install and/or replace any other necessary items. Lightning conductors. Fused circuit breakers. Sectionalization switches. Primary circuit ground wires. 6. Repair underground lines. 7. Perform any other work connected with the overhead and underground electrical distribution and transfer systems, as needed. 8. Carry out maintenance and distribution work on transformer groups,and Hanger doors including installation or replacement of parts. .2 The contractor will also perform repair or construction work in accordance with the instructions accompanying each request. It is anticipated that 1 firm will be issued a standing offer. The standing offer will be issued for an initial 1 year term, with two one (1) year options to extend the Standing Offer, for additional consecutive 12 month periods. Firms intending to submit bids on this project should obtain bid documents through the Government Electronic Tendering (GETS) service provider at http://Buyandsell.gc.ca/tenders . Firms that obtain bid documents from a source other than the official site run the risk of not receiving a complete package. Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, from the Government of Canada web site, and are to ensure they are addressed in the submitted bid. This procurement contains mandatory requirements. Failure to comply may result in rejection of your bid. Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the bid and contract documents. The standard documents are issued by Public Works and Government Services Canada and may be viewed at: https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisiti on-clauses-and-conditions-manual/5/R. The Crown retains the right to negotiate with suppliers on any procurement. "This PWGSC office provides procurement services to the public in English." Sealed bids will be received in English or French at: Contracting Services, Public Works and Government Services Canada, Room 100, 167 Lombard Avenue, Winnipeg, Manitoba, R3B 0T6. Closing Date: October 13, 2015, 14:00h. CDT. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

St. Andrews Lock and Dam Lighting and Electrical Upgrades, 625 River Road, Lockport, Manitoba

Public Works and Government Services Canada | Published October 4, 2016  -  Deadline October 21, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   St. Andrews Lock and Dam Lighting and Electrical Upgrades, 625 River Road, Lockport, Manitoba  Work of this Contract comprises lighting and electrical upgrades for the St. Andres Lock and Dam, 625 River Road, Lockport, Manitoba, as more fully described in the Drawings and Specification.  Value of Project: To assist with bonding and insurance requirements, this project isestimated at a value between $500,001 > $1,000,000.  OPTIONAL SITE VISIT. There will be an optional site visit on October 12, 2016 at 09:30 AM. Interested bidders are to meet at the site office of the PWGSC Works Maintenance Yard compound, St. Andrews Lock & Dam, Lockport, Manitoba. Bidders who, for any reason, cannot attend at the specified date and time will not be given an alternative appointment to view the site. No exceptions will be made.  Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, and are to ensure they are addressed in the submitted bid.  This procurement contains mandatory requirements. Failure to comply may result in rejectionof your bid.   Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the bid and contract documents. The standard documents are issued by Public Works and Government Services Canada and may be viewed at: https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/5/R .    Firms intending to submit bids on this project should obtain bid documents through the GETS service provider at http://Buyandsell.gc.ca/tenders. Firms that obtain bid documents fromasource other than the official site run the risk of not receiving a complete package.   The Crown retains the right tonegotiate with suppliers on any procurement. "This PWGSC office provides procurement services to the public in English." Sealed bidswill be received in English or French at: Contracting Services, Public Works and Government Services Canada, Room 100, 167Lombard Avenue, Winnipeg, Manitoba, R3B 0T6.    Closing Date: October 21, 2016, 14:00 CDT  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

RFSO electrical services at the CSCHAH 1015 Arlington St. and 820 Elgin Ave., and the JC Wilt Resear

Public Health Agency of Canada | Published January 4, 2017  -  Deadline January 20, 2017
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   RFSO electrical services at the CSCHAH 1015 Arlington St. and 820 Elgin Ave., and the JC Wilt Research Centre (JCWIDRC) at 745 Logan Ave., Winnipeg, Manitoba.  6D063-152312/A Thompson, Valerie Telephone No. - (204) 509-0349  Fax No. - (204) 983-7796 Email - valerie.thompson@pwgsc-tpsgc.gc.ca   Mandatory Security Requirement - SECRET: Prior to issuance of a Standing Offer the successful firm must hold a valid organization security clearance as indicated in PART 6, item 1, and contained in the SRCL attached at Annex H.  Request for a Regional Individual Standing Offer to supply all materials, equipment, labour, transportation, and supervision necessary to perform the following work, as more fully described in the Statement of Work, at Public Health Agency (PHAC) facilities, Winnipeg, Manitoba.  1. It is the intent of this Standing Offer to provide skilled and licensed Journeymen as requested by Public Health Agency of Canada (PHAC) in the form of service calls for electrical services.  2.A copy of each electricians current Journeymans licence/certification is to be provided to the departmental representative upon request.  It is anticipated that two (2) firms will be issued a standing offer. The standing offer will be issued for a 5 year term.   OPTIONAL SITE VISIT: It is recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for the site visit to be held at 1015 Arlington Street, Winnipeg, Manitoba on January 11, 2017. The site visit will begin at 10:30h CDT, in the Orientation Room.  Attendees will be required to report to the main reception desk prior to the start time, and provide photo identification.   Bidders should communicate with the Contracting Authority no laterthan14:00h CDT, January 10, 2017 to confirm attendance and provide the name(s) of the person(s) who will attend. Bidders will be required to sign an attendance sheet.   Bidders who do not attend or do not send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.   Firms intending to submit bids onthis project should obtain bid documents through the Government Electronic Tendering (GETS) service provider at http://Buyandsell.gc.ca/tenders .  Firms that obtain bid documents from a source other than the official site run the risk of not receiving acomplete package.  Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, from the Government of Canada web site, and are to ensure they are addressed in the submitted bid.   This procurement contains mandatory requirements. Failure to comply may result in rejection of your bid.   Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the bid and contract documents. The standard documents are issued by Public Works and Government Services Canada and may be viewed at:  https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/5/R .    The Crown retains the right to negotiate with suppliers on any procurement. "This PWGSC office provides procurement services to the public in English." Sealed bids will be received in English or French at: Contracting Services, Public Works and Government Services Canada, Room 100, 167 Lombard Avenue, Winnipeg, Manitoba, R3B 0T6.  Closing Date: January 20, 2017, 14:00h. CST.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

St. Andrews Lock and Dam Lighting and Electrical Upgrades, 625 River Road, Lockport, Manitoba

Public Works and Government Services Canada | Published November 17, 2016
Winner
Interlake Electric Ltd.
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Lowest/Lower Bid GSIN Description:  Bridges, Elevated Highways, Tunnels, Subways and Railroads Quantity: 1

SERVICES ÉLECTRIQUES

Agriculture and Agri-Food Canada | Published August 29, 2016  -  Deadline November 10, 2016
cpvs

Agriculture & Agri‑Food Canada’s (AAFC) Research & Development Centre at 101 Route 100, MORDEN MB requires a Contractor to provide Electrical Services on an as and when requested basis.

Wharf Rehabilitation, Riverton, MB

Fisheries and Oceans Canada | Published March 17, 2017  -  Deadline April 4, 2017
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Wharf Rehabilitation, Riverton, MB  F2470-170002/A Fagan, Mike  Telephone No. - (204) 296-5375 Fax No. - (204) 983-7796 Email: mike.fagan@pwgsc-tpsgc.gc.ca  The work site is located at the Riverton Public Wharf on the west shore of the IcelandicRiver in the town of Riverton. Riverton is located on PTH 8 approximately 40 km. north of Gimli, Manitoba.  The work under this contract covers the following, as more fully described in the plans and specifications:  1) Supply and installation of a new reinforced concrete deck and asphalt apron including supply and installation of new granular base and geotextile.  2) Supply and installation of new ladders, mooring cleats and traffic bollards. 3) Supply and installation of new granite field stonerip-rap including supply, installation, maintenance, and removal of silt curtain. 4) Supply and installation of new service pole, electrical pedestal, plugs, flood lights, light poles, electrical panel, meter and conduit. 200A overhead electrical to contractor supplied and installed service pole be provided by Manitoba Hydro and paid for by Small Craft Harbours. 5) Supply and installation of new float wharves and anchor piles.  Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, and are to ensure they are addressed in the submitted bid.   This procurement contains mandatory requirements. Failure to comply may result in rejection of your bid.   Standard terms and conditionsfor this procurement are incorporated by reference into, and form part of, the bid and contract documents. The standard documents are issued by Public Works and Government Services Canada and may be viewed at (https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual).    Firms intending to submit bids on this project should obtain bid documents through the GETS service provider on the Government of Canada Web site at http://buyandsell.gc.ca/procurement-data/tenders. Firms that obtain bid documents from a source other than the official site run the risk of not receiving a complete package.  The Crown retains the right to negotiate with suppliers on any procurement.   Sealed bids will be received at: Contracting Services, Public Works and Government Services Canada, Room 100, 167 Lombard Avenue, Winnipeg, Manitoba, R3B 0T6.    Closing Date: April 04, 2017, 14:00h. CDT.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

SPARES FOR VICTORIA CLASS SUBMARINE

Public Works and Government Services Canada | Published May 11, 2016
Winner
Mill Supply Ltd.
cpvs

The Department of National Defence has a requirement for spare parts in support of the Victoria Class Submarines, which are to be delivered to Halifax, Nova Scotia and to Victoria, British-Columbia:

Item No.: 0001 & 0002, NSN: 5977-20-002-6968, BRUSH, ELECTRICAL CONTACT

Quantity: 500, Unit of Issue: Each

Quality Assurance Code: C

P/N: NDS-30; NCAGE L5713

Delivery Date Required:

As soon as possible.

Requests for complete bid packages should be directed to the Contracting Authority below.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.

Electric Ear Corn Sheller

Agriculture and Agri-Food Canada | Published December 15, 2015  -  Deadline January 25, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: Agriculture and Agri-Food Canada has a requirement for supply and delivery of one (1) new electric ear corn sheller, as detailed herein, to support corn production research at the Brandon Research Station in Brandon, Manitoba. Delivery is mandatory on or before March 31, 2016. The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT). Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Electric Ear Corn Sheller

Agriculture and Agri-Food Canada | Published January 29, 2016  -  Deadline December 2, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Agriculture and Agri-Food Canada has a requirement for supply and delivery of one (1) new electric ear corn sheller, as detailed herein, to support corn production research at the Brandon Research Station in Brandon, Manitoba. Delivery is mandatory on or before March 31, 2016.  The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT).  This bid solicitation cancels and supersedes previous bid solicitation number 01633-161112/A dated December 15, 2015 with a closing of January 25, 2016 at 2:00pm. Delivery Date: 31/03/2016  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Office Trailers

Parks Canada | Published February 12, 2016  -  Deadline February 29, 2016
cpvs

Trade Agreement: LCSA/AIT Tendering Procedures: If 2+ bids offer Canadian goods/services other bids will not be considered Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Office Trailers  5P415-150552/A Guilford, Alison Telephone No. - (204) 228-7215 Fax No. - (204) 983-7796  Parks Canada Agency has a requirement for the supply, delivery and installation, of new or used Office Trailers, manufactured in 2002 or later, in Nahanni National Park Reserve in Fort Simpson, NT in accordance with the specifications detailed herein.  The Contractors installation must include the connection of the electrical, heating and data hook ups.  This procurement is set aside under the federal government Procurement Strategy for Aboriginal Business. For more information on Aboriginal business requirements of the Set-aside Program for Aboriginal Business, see Annex 9.4 of the Supply Manual.  This procurement is set aside from the international trade agreements under the provision each has for set-asides for small and minority businesses.  The requirement is subject to a preference for Canadian goods and/or services. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

LEOPARD 2 - SPARE PARTS

Public Works and Government Services Canada | Published January 26, 2016
Winner
ToKa Innovationen GmbH
cpvs

The Department of National Defence has a requirement for spare parts (28 line items) in support of the LEOPARD 2, which are to be delivered to CFSD Montreal, Quebec and to CFSD Edmonton, Alberta such as:  Item No.: 0020, NSN: 6150-12-352-2694, CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED Quantity: 4, Unit of Issue: Each Quality Assurance Code: C (Subject to Controlled Goods clause) P/N: 2500273-066150.000.0; NCAGE: D2692  Item No.: 0021, NSN: 6105-12-360-2746, MOTOR ASSEMBLY, ELECTRIC Quantity: 26, Unit of Issue: Each Quality Assurance Code: C  P/N: 96440 04502; NCAGE: D0601  Item No.: 0027, NSN: 6110-20-008-1718, POWER DISTRIBUTION BOX Quantity: 8, Unit of Issue: Each Quality Assurance Code: C  P/N: 1080141; NCAGE: 35907  All NCAGE’s for this requirement: D5589; D1572; D9893; D2692; 35907; D0080; D8015; D3683; D0601; D9248; 78959  Delivery Date Required: As soon as possible.  Requests for complete bid packages should be directed to the Contracting Authority below.  The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

LEOPARD 2, SPARE PARTS

Public Works and Government Services Canada | Published November 12, 2015
Winner
Schu & Schneider GmbH
cpvs

The Department of National Defence has a requirement for spare parts (51 line items) in support of the LEOPARD 2, which are to be delivered to CFSD Montreal, Quebec, such as: Item No.: 0007, NSN: 2990-12-178-5714, PIPE, EXHAUST Quantity: 20, Unit of Issue: Each Quality Assurance Code: C P/N: 2300109-018310.000.0; NCAGE: D1871 Item No.: 0034, NSN: 6110-12-305-6226, SWITCHING GROUP, POWER, ELECTRICAL Quantity: 3, Unit of Issue: Each Quality Assurance Code: Q (Subject to Controlled Goods clause) P/N: 2500194-730000.000.0; NCAGE: D2692 Item No.: 0048, NSN: 1015-12-343-3123, RECUPERATOR, WEAPONS TUBE PNEUMATIC Quantity: 14, Unit of Issue: Each Quality Assurance Code: C (Subject to Controlled Goods clause) P/N: 2500194-322650.00.0; NCAGE: D2692 All NCAGE’s for this requirement: D9448; D2657; D1871; D2692; D2396 Delivery Date Required: As soon as possible. Requests for complete bid packages should be directed to the Contracting Authority below. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Fire Pump and Controller

Transport Canada | Published February 19, 2015  -  Deadline February 24, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: T5013-140054/B Adele Palmer Supply Specialist, PWGSC Telephone No: (204) 983-1512 Email: adele.palmer@pwgsc-tpsgc.gc.ca TITLE: FIRE PUMP AND CONTROLLER Provide materials, labour and tools required to remove the existing diesel engine driven fire pump and fire controller and replace it with a new Electric Motor driven Fire Pump and Fire Pump Controller including Mechanical and Electrical connections for a complete installation at the Maintenance Center at the Churchill Airport in Churchill, Manitoba, Canada; as further described in Annex A. Delivery must include all parts, options and specifications listed in the supporting solicitation documentation. Delivery is required by March 31, 2015. FOB destination: Transport Canada, Churchill Airport, Churchill, Manitoba. The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT). Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Dash 8 Instruments and Components

Department of National Defence | Published February 9, 2016  -  Deadline February 24, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Repair and Overhaul: Dash 8 Instruments and Electrical Components  W7006-16RO99/A Allard, Ken Telephone No. - (204) 229-5423 Fax No. - (204) 983-7796   Dash 8 Instruments and Components   The Department of National Defence (DND) RCAF 17 Wing has a requirement for the provision of various technical services in support of specialized instrumentation and electrical components on the RCAF CT-142, Dash 8 aircraft. The services required include inspection, repair, overhaul, and paint, modify and/orreduce to spares only, as authorized by the Technical Authority.  The Contractor must adhere to the Statement of Work (SOW) at Annex A to the extent therein specified in support of the scope of work referenced in section 1.0.  The Standing Offer will be for a period of one (1) year from the date of award, and extensions to the initial period with optional periods.  The complete overhaul of each arising (except life items that are time expired) is not permitted under the terms of this SOW. The intent is that repair work will be done and overhaul resorted to only where such is economically and technically justifiable; or where required by technical specifications. The following definitions will apply:  a. Repair  The identification and correctionof those specific defects, which degrade the performance of an item causing it to function below the specifications;  b. Overhaul  Restoration of an item to its original condition/near life expectancy. It includes the replacement of worn, damaged or life expired parts; the incorporation of approved modifications; and the rework of components as necessary;  c. Reduction to Spares  As directed by the TA, the disassembly of items to identify components that can be certified as serviceable spare parts;  d. Inter-changeability  Following repair, the item must remain fully interchangeable (form, fit and function) with articles catalogued under the same reference number, part number and of the same modification status. This concept of inter-changeability must be extended to include internal characteristics such as wave forms and components layout in order to ensure fully compatibility with automatic test equipment software and automatic probing;  e. Serviceable Condition  The condition of equipment that allows it to be used, shipped or held in stores without it being subjected to any limitations not applicable to new equipment;  f. Reliability and Maintainability  The definitions of MIL STD-721 will apply; and  g. Configuration Management  This responsibility includes the ability to specify the status of R&O processes and the status of the embodiment of modifications, for any given material at the Contractors facility as specified in this SOW.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Medium Support Vehicle Maintenance

Department of National Defence | Published October 9, 2015  -  Deadline November 17, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Medium Support Vehicle Maintenance W0118-160003/A Chubey, Karen Telephone No. - (204) 291-5928 ( ) Fax No. - (204) 983-7796 The Department of National Defence (DND), has a requirement for the periodic maintenance and repair of approximately fifty Medium Support Vehicle System (MSVS) Workstar 7400 trucks in Shilo, MB. This work to be performed in support of the Navistar/international Equipment Vehicle holdings at 3 Canadian Division Support Group (3CDSG) Canadian Forces Base (CFB) Shilo. Support includes the provision of repair parts, vehicle inspections, services and repair to all mechanical, electrical and body and any warranty support as applicable. The period of the Standing Offer Agreement (SOA) is from Date of issuance to 30 November 2016 with Canada retaining an irrevocable option to extend the SOA for an additional (2) consecutive one (1) year periods. Work shall be completed in accordance with the Statement of Work and terms and conditions specified herein. The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), Bilateral Trade Agreements and the Agreement on Internal Trade (AIT) and World Trade Organization Agreement on Government Procurement (WTO-AGP). Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Heavy Equipment Repair Services

Department of National Defence | Published February 23, 2015  -  Deadline March 16, 2015
cpvs

Trade Agreement: NAFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: Yes Nature of Requirements: Heavy Equipment Repair Services W1568-150012/B Beaudette, Monique Telephone No. - (204) 983-6676 Fax No. - (204) 983-7796 The Department of National Defence (DND), Joint Task Force North (JTFN), Area Support Unit (North) (ASU(U)) Technical Services Transport and Electrical Mechanical Engineers (TEME), Yellowknife, NT, has a requirement for a Regional Individual Standing Offer. The work under the requirement comprises all labour, tools, equipment, transportation, and supervision necessary to provide heavy equipment repair services, including but not limited to forklifts, truck lifts, tractors, dump trucks and snow blower heads on and as and when required basis during the period of the Standing Offer. The period of the Standing Offer Agreement (SOA) is for one year from date of issuance with Canada retaining an irrevocable option to extend the SOA for an additional two (2) consecutive one (1) year periods. The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA). This procurement is subject to the T'licho Land Claim Agreement. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.