Call +44 800 9755 164

Public tenders for education in Denmark

Find all Education tenders in the world.
Finding business opportunities has never been easier.

Results for education. Make a new search!
EducationDenmark

Construction work for buildings relating to education and research

Tietgen Handelsgymnasium | Published November 9, 2016  -  Deadline December 19, 2016
The existing buildings at the address Elmelundsvej 10 used handelsgymna-Sium and 1971, 2010, 2014 and 2016. The buildings consist of a 6-storey building with basement bordered on one side of the canteen building in 2 levels and on the other side of the administrative wing in 2 levels. To the south is an adjoining new round building in 2 levels. East of the high building there in 2014 built a new multi-purpose hall

Construction work for buildings relating to education and research 2016 / S 216-392799

Tietgen Handelsgymnasium | Published November 9, 2016  -  Deadline December 19, 2016

Maintenance, repair and delivery of spare parts for Caterpillar engine models 3508 and 3512

Forsvarsministeriets Materiel- og Indkøbsstyrelse | Published November 4, 2016  -  Deadline December 6, 2016

This notice concerns the establishment of a framework agreement regarding a range of services and supply of spare parts in connection with the Caterpillar engine models 3508 and 3512 that are installed on ships in the Danish Navy. The Caterpillar engine models 3508 and 3512 are installed on the frigates and support vessels in the Danish Navy. There are 14 (fourteen) engines of the model 3508 and 6 (six) engines of the model 3512 installed on the three (3) IVER HUITFELDT-class frigates and on the two (2) ABSALON-class Support vessels in the Danish Navy. The establishment of the framework agreement concerns the following services:

— Certified maintenance and repair of the Caterpillar engines models 3508 and 3512

— Training and education in the maintenance of the engines performed by certified Caterpillar personnel

— Help desk services in connection with the maintenance of the engines performed by certified Caterpillar personnel.

Besides the above mentioned services the framework agreement also regards the supply of all spare parts that are needed for the Caterpillar engines models 3508 and 3512.

The framework agreement will have a duration of 7 (seven) years.

The services will primarily be performed in Denmark, but in case of repairs the Supplier may have to perform the service in other countries.

The purchaser is using Mercell Sourcing Services for this tender. To notify your interest and get access to any tender documents, you must copy and paste the link below into the adress-part on your browser. http://permalink.mercell.com/60745714.aspx Then choose the relevant tender. If you are not a licensee of Mercell Denmark A/S, fill out a registration of your company. This registration is required for your continued participation and is free of charge. After sending the registration you have free access to all tender documents. You will receive access codes to www.mercell.dk during normal working hours.

Unmanned Ground Vehicles

Forsvarsministeriets Materiel- og Indkøbsstyrelse | Published November 18, 2016  -  Deadline December 16, 2016

This notice concerns the establishment of a framework agreement regarding the acquisition of Unmanned Ground Vehicles (UGV). The framework agreement will have a duration of 7 years.

The UGV capacity is used by the Danish forces to obtain intelligence of enemy activities in unobserved closed areas such as urban areas, buildings, ships etc. when deployed on missions. The UGV shall be a moving platform with one or multiple sensors which shall make the operator able to indentify armed enemies, booby traps etc. in both daylight and in complete darkness. The UGV shall be controlled and operated by a HMI (Human Machine Interface). As the UGV capacity is deployed on missions, high durability is required and the UGV shall be able to withstand drops on hard surfaces such as concrete and pavement without losing functionality. In order to ensure successful operations, the UGV shall in addition be small, have a high mobility and be subject to a maximum weight of 3,5 kg as one soldier shall be able to throw it upwards, through open windows into buildings, over walls etc. The UGV shall be a MOTS (Military Off-The-Shelf) product previously delivered to a NATO country. The framework agreement also covers spare parts, education, repair and documentation. The purchaser is using Mercell Sourcing Services for this tender. To notify your interest and get access to any tender documents, you must copy and paste the link below into the address-part on your browser: http://permalink.mercell.com/61502448.aspx. If you are not a licensee of Mercell Denmark A/S, fill out a registration of your company. This registration is required for your continued participation and is free of charge. After sending the registration you have free access to all tender documents. You will receive access codes to: www.mercell.dk during normal working hours.

Variable message signs

A/S Storebælt | Published November 24, 2016  -  Deadline December 23, 2016

A/S Storebælt consists of a bridge connection between Zealand and Funen, where a system of variable road signs has been installed for regulation and information to the road users on the section. The system reaches from about 97 085 km (exit <40> Vemmelev on Zealand) to about 137 650 km (exit <46> Hjulby on Funen). The tender concerns the supply of a complete signage system including variable signs of the type prism and fully graphic LED signs. The delivered signs shall include own control, to which the SBF SCADA system shall provide the proper restrictions.

Under item II.2.4 the requested solution is further described, and the tender documents include a description of the project in further detail.

A Road Signage system shall be supplied for the section across Storebælt corresponding to the eastern and the west bridge and the area near the tollbooth and the adjacent road systems, where variable road signs are placed today.

The Road Signage system shall include the following types of signs:

— Variable prism signs (warning signs, prohibition signs, informative signs and route signs).

— Variable fully graphic LED signs (informative signs, [fares], warning signs).

Eastbound 42 variable signs shall be delivered, of which 36 signs shall be of the type variable fully graphic LED signs and the remaining 6 signs may be of the type variable prism signs or of the type variable fully graphic LED.

Westbound 41 variable signs shall be delivered, of which 35 signs shall be of the type variable fully graphic LED signs and the remaining 6 may be of the type variable prism signs or of the type variable fully graphic LED.

All the equipment shall be installered in open environment and be able to withstand gust corresponding to WL9 (50m/s) according to the standard DS/EN 12899. Furthermore, the equipment shall be prepared in materials corresponding to the corrosion class C5-M. The degree of protection of the supplied equipment shall as a minimum fulfil the requirement IP55. Regarding temperature the equipment shall be designed for normal operation for temperature class T2 (-25 °C to +55 °C) according DS/EN 12966.

The communication between the variable road signs and Great belts SCADA systems shall take place via profibus.

The expected delivery time of the materials after signing of the contact for the overall delivery is 4½ months.

The delivery shall include design, delivery and instruction for installation of a new Road Signage system for Great belt, where the installation shall be made by the operating contractor. Thus the delivery includes no installation work.

The present Road Signage system is installed on galvanized pylons including foundations to be reused. It is necessary that it is documented that the equipment can be installed on existing pylons.

The delivery shall include all services in connection with design and delivery of the Road Signage system for the section across Storebælt, including signage control to be installed in present road cabinets. Instruction for installation of the Road Signage system shall be delivered (all installation and cabling for road cabinets to be delivered by the client): General service The items for general services shall include all costs involved in the following:

Education,

— Commissioning report,

— Detail design,

— FAT test,

— Variable message signs fully graphic LED, east- and westbound,

— Variable message signs prism, east- and westbound,

— Installation instructions,

— SAT test,

— Documentation.

Social work services

Røde Kors Asylafdeling | Published November 25, 2016  -  Deadline January 12, 2017

Educational temporary employment services and social measures to the Contracting Authority includes overall benefits related to the asylum seekers to both children, unaccompanied children, families and adults (residents in the reception centers and asylum seekers, children and adults of different nationalities) who live in asylum centers in Denmark.

Education staffing Zealand.

It offered two parallel framework agreements with each 2 suppliers for sub first

Education staffing business in Jutland.

It offered two parallel framework agreements with each 2 suppliers for sub first

Education staffing on Bornholm.

It offered two parallel framework agreements with each 2 suppliers for sub first

Social work Zealand.

It offered two parallel framework agreements with each 2 suppliers for sub second

Social measures in Jutland.

It offered two parallel framework agreements with each 2 suppliers for sub second

Social measures on Bornholm.

It offered two parallel framework agreements with each 2 suppliers for sub second

Business transaction and personal business software package

Aalborg Universitet | Published November 10, 2016  -  Deadline December 9, 2016

The contract relates to a travel and expense system called RUS2.

Or intend to buy a Software as a Service, which includes the following main elements:

1) Providing a modern and user-friendly standard solution

2) Integration with related systems at Aalborg University, including travel agency and payment

3) Further development and maintenance in the form of continuous adjustment, development and upgrading of the supplier's standard solution in relation to new versions, etc.

4) Relevant education and guidance in the use of the system.

The offering is a negotiated procedure with the rules of procurement law (Law no. 1564 of 15.12.2015).

The process is therefore two-piece, so that the request be made prequalification for selection of 3-5 candidates who are invited to tender.

Canteen management services

Statsbiblioteket (pr. 1.1.2017: Nationalbiblioteket) | Published November 15, 2016  -  Deadline December 7, 2016

Offering includes operation of canteens and food and hot drinks machines at the State Library (SB) in Aarhus. The canteen used by employees of the SB and students / employees at Aarhus University (AU) and other users of the SB. The canteen is open on weekdays, pt. ml. pm. 8: 00-14: 30 and on Saturdays, pt. between the hours. 10: 00-13: 00th There comes also catering for meetings and events. SB has approximately 420 000 visitors per. year. Total sales are approximately 3.3 million DKK per. year. As university library for AU develops and delivers SB service that supports the university's strategy for research, education and knowledge dissemination. As the center of the Danish public libraries develop and supply SB services that complement public library services to citizens. As the National Library collects, preserves and makes available SB Danish newspapers and audiovisual media, Danish websites and Danish books and periodicals. Pr. 1.1.17 merge SB with the Royal Library under the name National Library.

The Offering is subject to the Contract Act section 3 (Act no. 1564 of 12/15/2015) as a restricted and negotiated procedures.

This contract shall electronically via the Danish Service Advisory portal for submitting tenders electronically in EUS Complete Tender Management (CTM system) on https://www.eusupply.com/dsr.asp The applicant company must register for the offer and apply for prequalification for the supply via CTM system. Only applications received via the CTM system will be considered for prequalification.

If the applicant company is not already registered in the CTM system, this should be done through the website https://www.eu-supply.com/dsr.asp After logging on CTM system, you must click on the link "published procedures' and the specific range available. To access the supply by pressing the button 'Accept'. When supply is selected, which answered a number of questions / attach relevant documents before the application deadline.

  • 1