Safety equipment, fire-fighting, police and defense equipment
Object of the contract includes a service consisting in organizing and conducting the 5-five inter-Clubs Meeting (MCS) in the district Bieruń-Lędziny in the municipalities of Bieruń, Lędziny, Bojszowy, Imielin, Chelm Slaski for the project participants Fri. Active Support for the effective operation and its surroundings. Within each of the five inter-led Clubs Meetings will be organized and conducted the following workshops: 1 workshop with a healthy diet - 40h teaching classes, 2 workshops of self-defense - 36h teaching classes, 3 workshops Sports Nordic Walking - 40h teaching classes, 4 - workshops with make-up (make-up, clothes, hairstyle) - 40h teaching classes, 5-modeling workshops - 36h teaching classes, 6-workshop with handicrafts - 40h teaching classes, 7 workshops floral - 40h teaching zajęć.Zamawiający will direct the workshop together 85 participants with a maximum of 170 people from their surroundings (max. 2 persons from the environment to 1 participant of the project, giving a total number of up to 255 people) ..
1. The contract is for the provision of services to the Employer by the Special Armed Formations Protection (SUFO) for the physical protection of persons and property and the right to a protected area, in military complexes that are on the economic supply 42 Air Base School in 2017, according to the Act 22/08/1997 protection of persons and property / Dz 2016 item. 1432 /, the Law of 5.8.2010 on the protection of classified information / Dz 2016 item. 1167 /, the Act of 21.5.1999 on arms and ammunition / Dz 2012 item. 576, as amended. zm./, Regulation of the Minister of National Defence, 19.6.1999 on the protection of the areas SUFO organizational units of the Ministry of National Defense / Dz.U. 2014 item. 1770 / and other implementing legislation for the / in. laws and normative documents relating to the above contract. The full description is contained in Annex 1 to WZUS.
Employer requires the Contractor with the help of employees of those they performed: a) services for the protection of the property of the district office in Gliwice, including: building street Sigismund the Old (consisting of a three-storey segment A four-segment B, two-storey segment C) is 1 concierge, telephone communication and CCTV. The building will be guarded by one person, 24 hours a day and the adjacent area owned by the Employer, including real estate situated on plots 1075, 1076, 1077 - cadastral unit Gliwice, Gliwice old precinct. b) handling of emergency calls after office hours and on weekends and holidays involving: adoption of the telephone notification of the event on the emergency phone number 510-138-137, save the application in the book records events, transfer the event information relevant departments and entities according to their properties, on the basis of their list of contact details, informing the Members of the Board or employees of the department of crisis management for receiving signals or passwords associated with the defense readiness of the state and introduced degrees of alarm. In special cases, the Contracting Authority foresees the possibility to introduce additional security staff. Working time additional employee may not exceed during the term of the contract 240 h ..
The contract is for the purchase of heavy vehicle rescue and firefighting drive 6x6 off-road function restriction zones of contamination for the TSO Zbuczyn. Vehicle brand new, built (completed) in 2016. Chassis brand new made in 2016. The vehicle must meet the requirements of Polish traffic regulations including requirements for emergency vehicles according to the Law on Road Traffic Law and the Regulation of the Minister of Infrastructure on technical conditions of vehicles and obligatory equipment. The vehicle and equipment and equipment must meet the requirements of the Regulation of the Ministry of Interior of 20 June 2007. (As amended) on the product to ensure the public safety or protection of health and life and property, as well as the rules for issuing the authorization of these products to the user (Dz. U. No 143, item. 1002, as amended). The vehicle and equipment should be approved for use in fire protection. Vehicle built and equipped must satisfy the requirements: Decree of the Ministers of Internal Affairs and Administration, Defense, Finance and Justice on the technical conditions of special vehicles and vehicles used for special purposes of the Police, Internal Security Agency, Foreign Intelligence Agency, Military Counterintelligence Service, the Military Intelligence Service , Central Anticorruption Bureau, Border Guard, Tax Inspection, Customs Service, Prison Service and Fire Service (Dz. U. No. 165 of 02 August 2011.). - The provisions of Polish Standard PN-EN 1846-1 and EN 1846-2 (or equivalent). A detailed description of the contract is given in Annex 2 to the tender documents available on the website of the Employer, ie., Www.osp.zbuczyn.pl.
The contract is for the supply of electricity (no distribution services) to those in the Terms of Reference objects Police province. Podlasie. Estimated total consumption for the above points power: 2 354 017 kWh. The indicated value has been adopted to calculate the estimated contract value does not reflect the real or the declared use of electricity during the contract and in any event can not be the basis for any claims by the Contractor. Object of the contract will be carried out under the conditions specified in the Energy Law of 10 April 1997 (consolidated text Dz. U. of 2012. Item. 1059, as amended.), In accordance with the regulations issued on the basis of implementing acts, in particular in accordance with Regulation of the Minister economy of 4 May 2007. on specific operating conditions of the power system (Dz. U. of 2007, no. 93, item. 623, as amended. d.), with the Minister of economy of 7 June 2013. on detailed rules and calculating tariffs and settlements in electricity (consolidated text Dz. U. of 2013., pos. 1200), the Council of Ministers dated 24 August 2004. on determining the types of property deemed necessary for the purposes defense and national security (consolidated text Dz. U. of 2014. item. 1087, as amended.), and in accordance with the tariff for electricity seller, tariff for electricity distribution services appropriate distribution System Operator (DSO Tariff), manual Movement Exploitation and Distribution Network (IRiESD) and in accordance with the provisions of the Civil Code. Estimated annual consumption of energy (kWh) divided into tariff groups is as follows: C-11- 892999, C-12a szczytowa- 32988, C-12a off peak - 70175, C-21-1357067, G-11-788 ..
The contract is: Moniuszki 7, 11-500 Giżycko - Renovation of a building for the repair of the roof, façade and internal spaces and the development of technical documentation. Building Description: The property equipped with all the facilities. GENERAL scope of works to be carried out: (detailed scope of work specified in the Bill of Quantities) Conditions of the task: The cost of such visits shall be borne by the Contractor. Work will be performed in the active plant. The scope of work to be performed in 2016, the development of project documentation: - the execution and design expertise to adapt the building No. 2 to fire regulations. - Execution of detailed design natural ventilation - performing detailed design of mechanical ventilation - the execution of the project executive heating system - performing as-built geodesic inventory of repair of the roof and facade work in the building 12 Scope of work to be performed in 2017 refurbishment of public internal work related to land development 6.19. In 2016 Contractor shall perform works in the range of 30%, while in 2017r. 70% of the works included in this task. A set of specific requirements concerning the organization of work, the standard and quality of workmanship, the use of the properties of building products and methods and how to assess the quality of execution of contracted work specified in the Technical Specification of performance and acceptance of works. A document confirming the effected disposal of demolition material should be attached to the documents on the day of delivery of the works. Location of work: work will be implemented in Military Unit No. 4222 in Giżycko. Protection of Confidential Information WOG 24, is the date of signing of the agreement: to provide a completed application for a pass (personal, car) for a group of people (according to the model attached as Annex 12 hereto). providing electronic images of people mentioned in the application. Pictures in electronic form can be delivered to the information carrier data or send e-mail to the following address: email@example.com. Contractor, Subcontractor employing foreigners before their work is obliged to comply with the Decision No. 21 Defense Minister of National Defence of 10.02.2012 on the planning and development of projects of international cooperation
1. The contract is for construction works in building No. 65 in the military 6077 Street. Wigury Street 1c in Warsaw in the following areas: Stage I: 1) Implementation of joinery and window frames: a) window - 06 (pcs. 3) b) window - 06a (pcs. 5), c) window - 06b (pcs. 2) d) window - 09 (pcs. 27), e) window - 010 (pcs. 4), f) window - 011 (pcs. 12), g) window - 012 (2 pcs.), h) window - 013 (pcs. 1), 2) Replacement of joinery and window frames. 3) Production and installation of window ventilators. 4) Supply and installation of PVC window sills. Stage II: 1) Implementation of joinery and windows and doors. a) window OP (pcs. 1), b) doors DA1 (2 pcs.) - KD, c) doors DA3 (pcs. 1) - KD, d) doors DA6 (pcs. 1), e) the door (DSP unit . 1), f) the door DZ1 (2 pcs.), g) the door DZ3 (pcs. 1) - KD, h) structure S3 (2 pcs.), i) wall ZS5 (pcs. 1), j) wall ZS6 (pcs. 1). 2) Installation of the windows and doors of machined glyphs. 3) Fabrication and installation of blinds. 4) Supply and installation of window sills conglomerate. 5) Installation closers. NOTE: Doors covered by the access control system must meet the requirements of defense NO-04-A004 dated 14.04.2016 r. The scope of the order is included in the project documentation.
Requirements Technical - quality, meeting the technical parameters - quality in accordance with the attached requirements of operational and - technical - Appendix 1, 2, 3 hereto General Specifications GS1 and the supporting documents for the supplier are available on the Design tab are specified in Annex 6 to Decision No 3 / Defense Minister of National Defence on 3 January 2014. The product labeled incorrectly will not be admitted to the magazine Employer. b) the type of document confirming eksploatacyjno- technical parameters required of the Contractor to the offer: - a description of the technical parameters of quality - est. No. 2, 3, 4 - the guarantee statement - est. No. 5, to supply the Contractor will join a file containing: - detailed instructions for building and the operation, maintenance, maintenance, service repairs, storage - book warranty - parts of the engine, generator and automation systems, made in book form and on the computer medium CD-ROM in Polish. I.2 General terms of delivery: The product is labeled incorrectly will not be admitted to the magazine Employer. The supplied equipment should be marked with a bar code by the GS1 System in accordance with the Decision No 3 / MON of the Minister of National Defence of 3 January 2014. Guidelines on defining the requirements for barcode labeling of products delivered to the Ministry of National Defence. The Employer will send to the designated RPW documentation associated with the receipt (contract, WET) 136 § 6.1) will allow a representative of the Delegation of the Military District (DEP) to assess compliance and acceptance of the agreement in accordance with the requirements set out in Annex 1, 2, 3 to the application 3. CONTRACTOR provide access DEP representative to the technical specifications of the product and or documents confirming the compliance of the agreement with the requirements of the Employer 4. All the quality requirements of the agreement are subject to the supervision of the quality pursued by the District Military Representation in accordance with the requirements of AQAP 2130. - the date of delivery of the Contractor must notify the Employer of 14 - days in advance - With the removal operations of the contract will be drawn up acceptance protocol signed by the Employer committee, representatives of the user and the Contractor at the place of delivery. W / the committee will receive a protocol of the agreement by: 1. reception quality-quantity made by the DEP on the delivered object of the contract 2. check the documentation that accompanied the ZSE listed in point I b) Terms of Reference 3. compliance check numbers identifying ZSE For this purpose, CONTRACTOR will provide the necessary amount of fuel. 5. A check of the minutes of training Officer's staff in handling, operation and repair of basic product - If you can not connect to the grid and distribution committee will make acceptance protocol of the agreement by: 1. reception quality-quantity made by the DEP on the delivered object of the contract 2. check the documentation that accompanied the ZSE listed in point I b) Terms of Reference 3. compliance check numbers identifying ZSE for this purpose, CONTRACTOR will provide the necessary amount of fuel. 5. A check of the minutes of training Officer's staff in handling, operation and basic repair of the product End of delivery and the signing of the acceptance protocol without comment, will be the basis to issue VAT invoices. The basis of the invoice is: 1. reception units by the DEP confirmed acceptance report written by the representatives of DEP and the commission OF 2. receipt of the file (mentioned in point I b) Terms of Reference for 3-person commission and the customer's representative confirmed acceptance protocols documentation 3. Connect with boot ZSE by the contractor confirmed by the protocol signed by the launch of 3-person commission ordering, a representative of the user and the cONTRACTOR 4. carried out by the cONTRACTOR training Officer for the four staff member at the place of delivery of certified training protocol signed by the three-person commission ordering, a representative of the user and the cONTRACTOR. 5. preparation of the final protocol signed by the three-person commission ordering, a representative of the user and the CONTRACTOR - Purchaser will inspect the goods on delivery of deficiencies shall notify the Contractor setting a deadline for their removal. The period of warranty and guarantees: The contractor is liable under the warranty for physical defects of the agreement on the terms of the provisions of the Civil Code 2. The Contractor will guarantee the correct operation of the ZSE in accordance with the operational and technical Requirements for a minimum of 2 years. 3. The Contractor will guarantee paint coatings exterior and interior of the container for 5 years The Contractor is also liable to the contracting authority if the goods delivered: a) It is owned by oso