Public tenders for military-equipment in United States

Find all Defense tenders in the world.
Finding business opportunities has never been easier.

Results for defense. Make a new search!

Maritime Shipment of Military Equipment Services

Department of the Air Force, Pacific Air Forces | Published April 2, 2017  -  Deadline April 13, 2017
cpvs

This is a combined Synopsis/Solicitation for FA5270-17-Q-B013 - Maritime Shipment of Military Equipment Services.  Please see the FA5270-17-Q-B013 and attachments for details.The due date is according with the RFQ, page 1 Japan standard time.

Military Equipment Shelving

Department of the Army, National Guard Bureau | Published August 3, 2016  -  Deadline August 17, 2016
cpvs

Link To Document

Individual Military Equipment

Department of the Air Force, Air Education and Training Command | Published September 17, 2014  -  Deadline September 25, 2014
cpvs

. COMBINED SYNOPSIS/SOLICITATION FA3047-14-R-0041 This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in FAR Subpart 12.6, and in conjunction with FAR Part 13.5 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation is attached. This solicitation is issued as a Request for Proposal (RFP) and the reference number is FA3047-14-R-0041. This solicitation document with incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-76 and DFARS Change Notice 2014091. The Offeror must propose on an all or none basis. Written proposals are required (oral offer will not be accepted). Fax or email proposals will not be considered. Submission of proposal must be in accordance with FAR 52.212-1 and Addendum to FAR 52.212-1, Instructions to Offerors, Commercial Items. Please include CAGE Code, DUNS, Tax Identification Number, and Discount Terms. The NAICS Code is 339999 and the size standard is 500 employees. Requirement is for the purchase of Brand Name or Equal Individual equiopment supplies with deliveries to the following locations: JBSA Lackland AFB, TX 78236. FOB: Destination. New Equipment Only - No remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. This requirement is set aside 100% for Small Business under the NAICS Code 339999, only proposals submitted by Small Business will be considered for award. Award will be made utilizing Lowest Price Technically Acceptable (LPTA) procedures. Vendors must submit all items on FA3047-14-R-0041. FA3047-14-R-0041 and Salient Characteristics are attached. QUESTIONS: All questions regarding this requirement must be submitted by e-mail to Kenneth Drake at kenneth.drake@us.af.mil by NLT 19 September 2014, 03:00 PM Central Standard Time. To be eligible to receive an award resulting from this RFP, Offerors must be registered in the System for Award Management Registration (SAM) previously called DOD Central Contractor Registration (CCR) database. NO EXCEPTIONS TO REGISTRATION. To register, please visit https://www.sam.gov. All clauses and provisions may be accessed electronically at http://farsite.hill.af.mil or https://acquisition.gov/far/. Proposals must be received NO LATER THAN 25 September 2014 at 2:00 PM, Central Standard Time. Proposals shall be mailed to 502D Contracting Squardon/JBKABD, 1655 Selfridge Ave, Bldg 5450, JBSA Lackland AFB TX 78236-5253. Point of Contact: Mr. Ken Drake at 210-671-1755. Fax or wmail proposals will not be considered.

Construct Military Equipment Parking (MEP) Lot in Sacramento, CA

Department of the Army, Army Contracting Command, MICC | Published February 6, 2017
cpvs

The Mission and Installation Contracting Command Center, Fort McCoy, Wisconsin has a requirement construct a military equipment parking (MEP) Lot at the BT Collins Army Reserve Center in Sacramento, CA 95828. Work to be performed under this firm, fixed price contract will be within the North American Industry Classification System (NAICS) Code 238990 with a small business size standard of $15,000,000 million. Solicitation W911SA-17-B-0015 will be issued as an Invitation for Bids (IFB) using the procedures outlined in Federal Acquisition Regulation (FAR) Part 14. It is anticipated that this requirement will be awarded as a fixed-price contract. This solicitation will be a 100% HUBZone Small Business Set aside. Project magnitude is $250,000 and $500,000. Period of Performance will be 90 after the notice to proceed. MICC Fort McCoy intends to issue the solicitation within 30 days of this pre solicitation notice. The site visit date and time will be provided with the solicitation once it is issued. Do not contact the Contract Specialist for requests to change the set aside or to state your interest. Parties interested in the solicitation should access the web page (fbo.gov) for the future issuance of the solicitation, associated documents, and solicitation amendments; contractors will not be directly notified of solicitation amendments.

84--GUANG Misc Military Equipment

Department of the Army, FedBid | Published June 12, 2015
cpvs

No Description Provided

84--GUANG Misc Military Equipment

Department of the Army, FedBid | Published May 31, 2015  -  Deadline June 11, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911YU-15-T-1001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-82. The associated North American Industrial Classification System (NAICS) code for this procurement is 316998 with a small business size standard of 500.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-06-11 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be APO, AP 96543 The National Guard - Guam requires the following items, Meet or Exceed, to the following: LI 001: Arm Band/Around the neck ID Card Holder ITEM NUMBER: 88IDAB, 90, EA; LI 002: Kershaw Blackout Military Folding Knife ITEM NUMBER: 155OST, 90, EA; LI 003: OCP Pattern AF Rank with Velcro ITEM NUMBER: TTTV-(Rank) *Rank Types to be provided upon award, 360, EA; LI 004: OCP Pattern for ECWS Jacket ITEM NUMBER: TTTV-(Rank) *Rank Types to be provided upon award, 90, EA; LI 005: IR US Flag with Velcro ITEM NUMBER: TTT-IR Flag, 90, EA; LI 006: OCP Name Tapes (Provide list of names) (Velcro) ITEM NUMBER: TTTNAME-OCP *Names to be provided upon award, 360, EA; LI 007: OCP USAF Uniform Tape (Velcro) ITEM NUMBER: TTTUSAF-OCP, 360, EA; LI 008: 123A Batteries (12 per pack) ITEM NUMBER: A53032, 14, PACK; LI 009: AAA Batteries (24 per pack) ITEM NUMBER: TC3A-24, 4, PACK; LI 010: Benchmade Military Strap Cutter ITEM NUMBER: BenchSC, 90, EA; LI 011: TSA Approved 3 digit Combo Lock ITEM NUMBER: 1500-518-000, 90, EA; LI 012: Camalbak BFM Pack Multicam ITEM NUMBER: 10002, 90, EA; LI 013: Camalbak 100oz Hydration pack w/bladder ITEM NUMBER: CB60666, 90, EA; LI 014: OCP Knee Pads ITEM NUMBER: DDMDKPMC *Sizes to be provided upon award, 90, EA; LI 015: OCP MechaniX Wear Gloves ITEM NUMBER: MPT-79-XXX *Sizes to be provided upon award, 90, EA; LI 016: Mechanic Wear Black Mechanics Gloves ITEM NUMBER: MPT-55 *Sizes to be provided upon award, 90, EA; LI 017: WileyX Valor Black Sunglasses ITEM NUMBER: CHVAL01 *Sizes to be provided upon award, 90, EA; LI 018: Strap Cutter (Gerber 30-000132) ITEM NUMBER: A53032, 90, EA; LI 019: Salisbury High Voltage Linesman Gloves ITEM NUMBER: E011B *Sizes to be provided upon award, 11, EA; LI 020: Patrol Cap OCP - 50% nylon/50% cotton ripstop fabric is quarpel treated for water repellency ITEM NUMBER: PRO#F5571-CRYE-678 *Sizes to be provided upon award, 11, EA; LI 021: 5.11 Socks (Tan) - 100% COTTON ITEM NUMBER: 10013-120 *Sizes to be provided upon award, 11, EA; LI 022: Magid ARC Hard Cap and Face Shield Combo ITEM NUMBER: H16HAT10CALCAF, 11, EA; LI 023: Inside T-Shirt (Tan- 3 Pack) 100% COTTON ITEM NUMBER: 40016-652 *Sizes to be provided upon award, 11, EA; LI 024: Military Boot Composite-Toe (Tan) ITEM NUMBER: 119402 *Sizes to be provided upon award, 11, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Guam intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Guam is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination OCONUS (Outside Continental U.S. - GUAM), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

70 -- Sabtech Military Equipment Replacement System II

Department of the Navy, Space and Naval Warfare Systems Command | Published September 22, 2016
cpvs

No Description Provided

Repair Military Equipment Parking Lot & Install new LED Lighting in Fort Smith, AR 72916

Department of the Army, Army Contracting Command, MICC | Published April 13, 2017
cpvs

The Mission and Installation Contracting Command Center, Fort McCoy, Wisconsin has a requirement to repair a military equipment parking lot (MEP) and install new LED lighting at the Fort Chaffey Maintenance Facility/ECS 15 located at 11500 Custer Blvd, Fort Smith, AR 72916. Work to be performed under this firm, fixed price contract will be within the North American Industry Classification System (NAICS) Code 238990 with a small business size standard of $15,000,000 million. Solicitation W911SA-17-B-0008 will be issued as an Invitation for Bids (IFB) using the procedures outlined in Federal Acquisition Regulation (FAR) Part 14. It is anticipated that this requirement will be awarded as a fixed-price Indefinite Delivery Indefinite Quantity contract. This solicitation will be a 100% Small Business Set aside. Project magnitude is over $1,000,000 and 5,000,000. Period of Performance will be 60 after the notice to proceed. MICC Fort McCoy intends to issue the solicitation within 60 days of this pre solicitation notice. The site visit date and time will be provided with the solicitation once it is issued. Do not contact the Contract Specialist for requests to change the set aside or to state your interest. Parties interested in the solicitation should access the web page (fbo.gov) for the future issuance of the solicitation, associated documents, and solicitation amendments; contractors will not be directly notified of solicitation amendments.

A--General Purpose Decontaminant for Hardened Military Equipment (GPD-HME)

Department of the Army, Army Contracting Command | Published September 3, 2014
cpvs

See original synopsis.

A--General Purpose Decontaminant for Hardened Military Equipment (GPD-HME)

Department of the Army, Army Contracting Command | Published June 5, 2014  -  Deadline July 7, 2014
cpvs

Interested parties are hereby notified that the Government is soliciting offers to supply a General Purpose Decontaminant for Hardened Military Equipment (GPD-HME). The solicitation and the attachments listed in the solicitation may be downloaded from the ASFI website: https://acquisition.army.mil/asfi. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is W911QY-14-R-0020 and is issued as a Request for Proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73, effective May 29, 2014. The small business size standard is 500 employees. This will be a full and open competition to provide a General Purpose Decontaminant for Hardened Military Equipment (GPD-HME) under NAICS code 325998 -- All Other Miscellaneous Chemical Product and Preparation Manufacturing. Any contract awarded as a result of this solicitation will be a Firm Fixed Price Contract awarded using Simplified Acquisition Procedures in accordance with FAR 12. The Government reserves the right to make multiple, single, or no contract awards if in the best interest of the Government. Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available. Contract award(s) resulting from this solicitation are subject to availability of funds. The Government intends to award a contract(s) with discussions with Offerors, but reserves the right not to conduct discussions if determined to be necessary in the best interests of the Government. Therefore, the offeror's initial proposal should contain the offeror's best terms from a price and technical standpoint.

Z--Alter military equipment parking (MEP) Midland USARC, Midland TX

Department of the Army, Army Contracting Agency, North Region | Published March 28, 2008  -  Deadline April 14, 2008
cpvs

The contractor shall furnish all supervision, labor, material, equipment and incidentals necessary to alter the military equipment parking (MEP) at the Midland U.S. Army Reserve Center, 2414 Windecker, Midland, Texas in accordance with the Statement of Work. The period of performance is ninety (90) days after receipt of Notice to Proceed. The resultant award shall be a Firm Fixed Price construction contract. The NAICS code, SIC code and size standard for this procurement are 238990, 1771 and $13M. I n accordance with FAR 19.1007, this procurement is unrestricted. Only one award shall be made. Bidders are responsible for printing paper copies of the solicitation and any amendments once they are issued. The solicitation number is W91LV2-08-B-0003. It is the bidders responsibility to monitor the web page for any amendments to this solicitation. The contractor must be registered in the Central Contractor Registration database as required by DFARS 204.7300 prior to award. A bid opening date has not been established at this time but will be annotated in the final released Invitation for Bid.

Z--Repair existing unpaved Military Equipment Parking at Houston USARC, Houston, TX

Department of the Army, Army Contracting Agency, North Region | Published August 6, 2008  -  Deadline August 20, 2008
cpvs

Contractor shall provide all supervision, labor, material, equipment necessary to repair existing unpaved military equipment parking at Houston USARC, Houston, TX. The NAICS is 238990, SIC Code is 1771, size standard is $13M. This acquisition is unrestricted. Only one award shall be made. Interested firms must request a solicitaion package in writing. Request should be faxed to Diana Harris at 609-562-2920 or emailed to diana.v.harris@us.army.mil.

81--Military Equipment Protective Covers

Department of the Army, FedBid | Published June 23, 2014  -  Deadline July 23, 2014
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010524951 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 322211 with a small business size standard of 0.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-23 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Eastover, SC 29044 The National Guard - South Carolina requires the following items, Brand Name or Equal, to the following: LI 001: M1A1 Tank Protective Cover. Vehicle Dimensions: Height 113", Length 387", Width 144"., 29, EA; LI 002: Bradley (BFIST, M2A2, M3A3) Protective Cover Vehicle Dimensions: Height 117", Length 254", Width 126"., 36, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - South Carolina intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - South Carolina is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

A--General Purpose Decontaminant for Hardened Military Equipment (GPD-HME)

Department of the Army, Army Contracting Command | Published February 15, 2013  -  Deadline March 18, 2013
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is W911QY-13-R-0023 and is issued as a Request for Proposal (RFP), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-65, effective January 29, 2013. This will be a full and open competition to provide a General Purpose Decontaminant for Hardened Military Equipment (GPD-HME) under NAICS code 325998 -- All Other Miscellaneous Chemical Product and Preparation Manufacturing. The small business size standard is 500 employees. Multiple awards are anticipated. The number of awards will be dependent upon the number of Offerors with qualifying products and available funds. Any contract awarded as a result of this solicitation will be a Firm Fixed Price Contract awarded using Simplified Acquisition Procedures in accordance with FAR 12. The Government anticipates awarding approximately four (4) contracts under this solicitation, but reserves the right to award, more than or less than four awards, a single award, or no awards, if in the best interest of the Government. Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available. Contract award(s) resulting from this solicitation are subject to availability of funds. The Attachments listed in this solicitation may be downloaded from the ASFI website: https://acquisition.army.mil/asfi. The Government intends to award a contract(s) WITHOUT DISCUSSIONS with Offerors, but reserves the right to conduct discussions if determined to be necessary in the best interests of the Government. Therefore, the offeror's initial proposal should contain the offeror's best terms from a price and technical standpoint. DESCRIPTION OF REQUIREMENT: This solicitation is for the provision of all labor and expertise necessary to provide a General Purpose Decontaminant for Hardened Military Equipment (GPD-HME) in accordance with the requirements of this solicitation. The GPD-HME will provide thorough decontamination capabilities for tactical vehicles, shipboard surfaces, crew-served weapons and individual weapons exposed to chemical and biological agent contamination. Potential solutions for GPD-HME include, but are not limited to, liquid or solid concentrates that require dilution and solutions in ready-to-use form. The following product characteristics are desired: - Commercial products with the ability to remove/neutralize chemical contamination present on HME from a starting liquid challenge of 10.0 g/m2 to a Contact Exposure Level (CEL) of less than: -- Nerve G: 16.7 mg/m2 -- Nerve V: 0.78 mg/m2 -- Blister H: 100 mg/m2 - Commercial products with the ability to remove/neutralize chemical contamination present on HME from a starting liquid challenge of 10.0 g/m2 to Vapor Levels less than: -- Nerve G: 0.1 mg/m3 -- Nerve V: 0.04 mg/m3 -- Blister H: 0.1 mg/m3 - Commercial products with the ability to remove/neutralize representative Biological Agents from a starting challenge of greater than 1 x 108 Colony Forming Units (CFU)/m2 or Plaque Forming Units (PFU)/m2 to the following residual levels: -- Bacterial endospores: less than 100 CFU/m2 (6-log reduction) -- Vegetative bacteria: less than 10 CFU/m2 (7-log reduction) -- Viruses: less than 10 PFU/m2 (7-log reduction) - Commercial products capable of decontaminating Toxic Industrial Chemicals/Materials (TICs/TIMs), radiological contamination and/or Non-Traditional Agents (NTA). - Commercial products which may be applied to contaminated material/equipment surfaces by field expedient applicators, such as mops and brushes and capable of removing gross contamination within thirty (30) minutes following application. - Commercial products which are non-hazardous, non-flammable and inherently safe. Products that minimize hazards to both personnel and the environment, and that do not produce uncontrollable residual hazards during the decontamination process. - Commercial products which do not cause material/equipment degradation when used to decontaminate HME. - Commercial products which do not cause false positives/negatives for fielded tactical detectors. - Commercial products which do not degrade military relevant Individual Protection Equipment (IPE) or the effectiveness or ability of existing decontamination systems. - Commercial products which are efficacious for at least six (6) hours after being made ready for use and which have at least a five-year (5-yr) shelf life in storage. Each GPD-HME, in its designed configuration of components, must perform the functions necessary for successful completion of the GPD-HME mission, and meet all of the physical characteristic requirements in the Performance Specification (PSPEC) (Attachment 1). This includes decontaminating chemical and biological agents on HME to the specified efficacy levels and applicator compatibility, transportability, coverage area, etc. requirements. Potential solutions for GPD-HME include, but are not limited to, liquid or solid concentrates that require dilution and solutions in ready-to-use form. Applications of GPD-HME may be single or multiple, depending on vendor specifications. The unit of measure in this solicitation assumes a ready-to-use formulation and a single surface application. The units of measure in this solicitation are gallons (Gal) and 200 milliliter aliquots. If the Offeror proposes a non-liquid solution, the offeror must propose quantities that will convert to the quantity in gallons/aliquots specified in this solicitation, which shall convert into a ready-to-use product for a single surface application necessary to decontaminate equipment as specified in the PSPEC. To access the full Solicitation W911QY-13-R-0023 and its attachments, click on the Solicitation Documents/Attachments link on this page.

A--General Purpose Decontaminant for Hardened Military Equipment (GPD-HME)

Department of the Army, Army Contracting Command | Published February 3, 2012  -  Deadline March 5, 2012
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is W911QY-12-R-0007 and is issued as a Request for Proposal (RFP), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-53, effective July 5, 2011. This will be a full and open competition to provide a General Purpose Decontaminant for Hardened Military Equipment (GPD-HME) under NAICS code 325998 -- All Other Miscellaneous Chemical Product and Preparation Manufacturing. The small business size standard is 500 employees. Multiple awards are anticipated. The number of awards will be dependent upon the number of Offerors with qualifying products and available funds. Any contract awarded as a result of this solicitation will be a Firm Fixed Price Contract awarded using Simplified Acquisition Procedures in accordance with FAR 12. Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available. Contract award(s) resulting from this solicitation are subject to availability of funds. The Attachments listed in this solicitation may be downloaded from the ASFI website: https://acquisition.army.mil/asfi and from the Natick Contracting Division website https://www3.natick.army.mil. The Government intends to award a contract(s) WITHOUT DISCUSSIONS with Offerors, but reserves the right to conduct discussions if determined to be necessary in the best interests of the Government. DESCRIPTION OF REQUIREMENT: The Product Manager for the Decontamination Family of Systems (DFoS) under the Joint Project Manager for Protection (JPM P) is seeking proposal responses for commercial products that have the potential to meet the performance requirements for a GPD-HME versus chemical and biological agents/contamination. The GPD-HME will provide thorough decontamination capabilities for tactical vehicles, shipboard surfaces, crew-served weapons and individual weapons exposed to chemical and biological agents/contamination. Potential solutions for GPD include, but are not limited to, liquid or solid concentrates that require dilution and solutions in ready-to-use form. The DFoS Product Manager seeks technical and cost information related to: - Commercial products with the ability to remove/neutralize chemical contamination present on HME from a starting liquid challenge of 10.0 g/m2 to a Contact Exposure Level (CEL) of less than: * Nerve G: 16.7 mg/m2 * Nerve V: 0.78 mg/m2 * Blister H: 100 mg/m2 - Commercial products with the ability to remove/neutralize chemical contamination present on HME from a starting liquid challenge of 10.0 g/m2 to Vapor Levels less than: * Nerve G: 0.1 mg/m3 * Nerve V: 0.04 mg/m3 * Blister H: 0.1 mg/m3 - Commercial products with the ability to remove/neutralize representative Biological Agents from a starting challenge of greater than 1 x 10 8 Colony Forming Units (CFU)/m2 or Plaque Forming Units (PFU)/m2 to the following residual levels: * Bacterial endospores: equipment surfaces by field expedient applicators, such as mops and brushes and capable of removing gross contamination within thirty (30) minutes following application. - Commercial products which are non-hazardous, non-flammable and inherently safe. Products that minimize hazards to both personnel and the environment, and that do not produce uncontrollable residual hazards during the decontamination process. - Commercial products which do not cause material/equipment degradation when used to decontaminate HME. - Commercial products which do not cause false positives/negatives for fielded tactical detectors. - Commercial products which do not degrade military relevant Individual Protection Equipment (IPE) or the effectiveness or ability of existing decontamination systems. - Commercial products which are efficacious for at least six (6) hours after being made ready for use and which have at least a five-year (5-yr) shelf life in storage. Each GPD-HME, in its designed configuration of components, must perform the functions necessary for successful completion of the GPD-HME mission, meet all of the physical characteristic requirements in the Performance Specification (PSPEC) (Attachment 3). This includes decontaminating chemical and biological agents on hardened military equipment to the specified efficacy levels and applicator compatibility, transportability, coverage area, etc. requirements. Potential solutions for GPD-HME include, but are not limited to, liquid or solid concentrates that require dilution and solutions in ready-to-use form. Applications of GPD-HME may be single or multiple pending vendor specifications. The unit of measure in this solicitation assumes a ready-to-use formulation and a single surface application. The unit of measure in this solicitation is gallons (Gal). If the Offeror proposes a non-liquid solution, the offeror may propose quantities that will convert to the quantity in gallons specified in this solicitation, which shall convert into a ready-to-use product for a single surface application necessary to decontaminate equipment as specified in the PSPEC. For full text of this Combined Synopsis/Solicitation, proposal format and instructions, evaluation criteria, attachments and all other documentation, please click the Additional documentation link under "Additional Info" below:

Y--88th RSC, Fort Carson, Colorado, Construct Military Equipment Parking (MEP) Lot

Department of the Army, U.S. Army Corps of Engineers | Published July 3, 2012  -  Deadline August 28, 2012
cpvs

The work for this project shall include, but not limited to, construction of new gravel military equipment parking lot; stripping, grading, installing a gravel surface course over the subbase; installation of culvert drainage pipe, security fencing with double swing gate and motorized operators, electrical work and exterior security lighting. Estimated range: $500,000 - $1,000,000 Completion days: 120 calendar days NAICS Code: 237990 Small Business Size Standard: $33.5 million Total Small Business Set Aside It is anticipated that the plans and specifications for this project will be available at www.fbo.gov on or about July 27, 2012. Any contractor wanting the plans and specifications must download them from this website. Arrangements for inspecting the site may be made with: Mr. Dennis E. Campbell, ECS #42 Manager 88th RSC, DOL 3051 Oconnell Blvd Ft Carson, CO 80913 Office: (719)524-4949 Mobile: (719)685-6672 E-Mail: dennis.campbell1@usar.army.mil (Collect calls not accepted.)

A-- Manufacturing Process Technologies for Military Equipment Replacement on Demand (MPTMERD) program.

Department of the Army, U. S. Army Materiel Command | Published March 19, 2008  -  Deadline April 18, 2008
cpvs

The government intends to award a sole source Indefinite Delivery Indefinite Quantity (IDIQ), five year Firm Fixed Price/Cost Plus Fixed Fee type contract to Alion for Manufacturing Process Technologies for Military Equipment Replacement on Demand (M PTMERD) program. All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of the solicitation; however, the solicit ation will not close prior to the closing date stated above. Proposals are to be submitted electronically followed by the original with signatures. Request for a copy of the solicitation will be by data fax to (256) 842-6052, by e-mail or mailed to: US Army Aviation and Missile Command ATTN: Robert P. Aldridge, Contract Specialist, AMSAM-AC-RD-RED, Bldg 5400, 5400 Fowler Road, Rm. B-135 Redstone Arsenal, AL 35898-5280 Email: Robert.p.Aldridge@us.army.mil

Snap Fasteners for Military Equipment Items

Department of Justice, Federal Prison Industries/UNICOR | Published July 13, 2010
cpvs

Award number 2 of 2 awards. Solicitation CT1998-10 resulted in a Multiple Award to two (2) contractors.

29--Implementation of Option Year 2 for various types of batteries for Military Equipment.

Department of the Army, National Guard Bureau | Published November 7, 2013
cpvs

Awarded Option Year 2 to Hartel Services Inc., 4430 17th Avenue South, Fargo, ND 58103.

Commercial Items, Various Webbing & Tape Items (Narrow Fabrics) used to manufacture military equipment items

Department of Justice, Federal Prison Industries/UNICOR | Published October 20, 2010  -  Deadline November 10, 2010
cpvs

This is a solicitation for commercial items prepared in accordance with the format in Subpart 12.3, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested. The solicitation number is CT2032-10. The solicitation is issued as a Request for Proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-46. The North American Industry Classification System (NAIC) code is 313221 (narrow fabric mills) and small business size standard is 500. This acquisition is set-aside 100% for small business. UNICOR, Federal Prison Industries, Inc. intends to enter into a firm-fixed price, Requirements type contract for delivery to the UNICOR facility located at FCI Ray Brook, NY 12977. The period of performance shall be two (2) years with two (2) one-year options, if exercised, from date of award. The products are commercial items, various webbing and tape narrow fabric items for manufacturing equipment items such as tool bags, canteen covers, small ammo cases and radio carrying cases. The finished goods are for sale to the DLA Troop Support Center Philadelphia. A complete description of the items is in Section B Supplies or Services and Prices/Costs. The estimated quantities for the line items are also shown in Section B.
Categories
  United States - Show all countries
Naval station norfolk norfolk va 23511 (162)Norfolk, va (101)Elizabeth city, nc (85)San diego, ca (61)Casa or ald elizabeth city, nc (58)Usaf academy, co (56)Washington, dc (54)Boulder, co (49)Rockville, md (43)Schriever afb, co (34)Seattle, wa (34)Seattle, wa (28)Virginia beach, va (28)Louisville, ky (27)Newport, or (24)Honolulu, hi (21)Colorado springs, co (18)Honolulu, hi (18)Roger brooke drive fort sam houston, tx (17)Ames, ia (16)Hurlburt field, fl (16) columbus oh 43216-5000 (15)Alameda, ca (15)San diego, ca (15)Baltimore, md (14)Claremore, ok (14)Dover, de (14)Granby street norfolk, va (14)Northeast seattle, wa (14)Silver spring, md (13)Boulder, co (12)Elizabeth city, nc (12)Mcclellan, ca (12)Westhampton beach, ny (12)Altus afb, ok (11)Bethesda, md (11)Camp lejeune, nc (11)Charleston, sc (11)Dover afb, de (11)New cumberland, pa (11)Alameda, ca (10)Maxwell afb, al (10)Norfolk, va (10)Tinker afb, ok (10)Travis afb, ca (10)College park, md (9)Columbus, oh (9)Kodiak, ak (9)Murfreesboro, tn (9)Dahlgren, va (8)Natick, ma (8)Randolph afb, tx (8)Tyndall afb, fl (8)Alexandria, va (7)Brandon, 1 (7)Gaithersburg, md (7)Multiple shipping information. (7)Aurora, co (6)Ave tucson, az (6)Fort belvoir, va (6)Fort detrick, md (6)Langley afb, va (6)Las vegas, nv (6)Long beach, ca (6)Mark center drive alexandria, va (6)Portsmouth, va (6)Robins afb, ga (6)See statement of work. (6)Altus, ok (5)Bloomington, mn 55437 (5)Cannon afb, nm (5)Dover , de (5)Kodiak, ak (5)Mcb camp lejeune, nc (5)Martin road redstone arsenal, al (5)Mobile, al (5)Nasa/john f. kennedy space center john f. kennedy space center fl 32899 (5)New york, ny (5)Newport, ri (5)Norfolk , va (5)Oakland, ca (5)Oklahoma city, ok (5)Raf lakenheath, 1 (5)Riverside, ca (5)San antonio, tx (5)Usaf academy, co (5)United states air force academy, co (5)Apo, 1 (4)Adana (4)Anchorage, ak (4)Atlanta, ga (4)Belmont street brockton, ma (4)Bury st edmunds, 1 (4)Clovis, nm (4)Contractor's facility (4)Crane, in (4)Eglin afb, fl (4)Fort worth, tx (4)Hardeeville, sc 29927 (4)