Public tenders for technical-testing in United States

Find all Consulting tenders in the world.
Finding business opportunities has never been easier.

Results for consulting. Make a new search!

H--Technical Testing Services for VA Project573CA2070

Department of Veterans Affairs, VA North Florida/South Georgia Health Care System | Published September 29, 2008  -  Deadline October 27, 2008
cpvs

The NF/SGVHS proposes to solicit for responsible sources to furnish all labor, tools, materials, and equipment necessary to provide complete technical testing services for the construction project 573CA2070, Construct Malcom Randall VA Facility. These services include, but are not limited to the following:1. Sitework Testing Services: Laboratory and Field Testing, including ASTM D1557, ASTM D2922, ASTM D698, AASHTO T180, AASHTO T99, AASHTO T191, AASHTO T205, AASHTO T1238, and Penetration Tests.2. Aggregate Testing: Laboratory and Field Testing, including ASTM D1557, ASTM D2922, AASHTO T27, AASHTO T96, AASHTO T180, AASHTO T191, and AASHTO T104 Tests.3. Asphalt Testing: Laboratory and Field Testing, including AASHTO T230, ASTM Dl 188, AASHTO T27, AASHTO T96, and AASHTO T104 Tests.4. Concrete Testing: Laboratory and Field Testing, including ASTM C3 1, ASTM C39, ASTM C143, ASTM C173, ASTM C33, ASTM C330, and ASTM E1155 Tests.5. Steel Testing (Reinforcing and Structural): Laboratory and Field Testing, including ASTM A370, and ASTM E164 Tests.6. Masonry Testing: Laboratory and Field Testing, including ASTM C780, ASTM C 1019, and ASTM C 109 Tests.7. Fireproofing: Laboratory and Field Testing, including ASTM E605 Tests.8. Provide up to 4,000 man-hours of field personnel time per Section 01410.9. Provide one set of the Test Standards Manuals. See Section 01410, para. 1.3.E.The Contractor shall be required to complete all work within three (3) years after "Notice to Proceed" is signed.

B--BEDTOWER TECHNICAL TESTING SERVICES - C92674

Department of Veterans Affairs, VA North Florida/South Georgia Health Care System | Published December 2, 2008
cpvs

No Description Provided

D--FLC, Philadelphia intends to purchase technical testing for the software LifeRing on a sole source basis from Advanced Ground Information Systems, Inc. of Jupiter, FL

Department of the Navy, Naval Supply Systems Command | Published April 19, 2012  -  Deadline April 20, 2012
cpvs

FLC, Philadelphia intends to purchase technical testing for the software LifeRing on a sole source basis from Advanced Ground Information Systems, Inc. of Juniper, FL. They are the only source capable of responding to the specialized work C4AD is requesting. The plug-in and the message in XML format is needed to run the system, and is owned and developed by AGIS, Inc. Any firm interested in this requirement should submit a technical capability statement to FLC, Phila. within one day of this announcement. Such information should be addressed to the attention of FLC, Code 290.1G. The government shall not pay for any information submitted. The applicable NAICS code is 541519/25.5 MIL

VH-3D Technical Test Support

Department of the Navy, Naval Air Systems Command | Published February 24, 2010  -  Deadline March 11, 2010
cpvs

The Naval Air Systems Command intends to negotiate and award a Time and Material type order with Sikorsky Aircraft Corporation (SAC), Strafford, CT for intermittent Instrumentation Support of various flight test programs requiring on board telemetry data acquistion utilizing a previously installed Sikorsky Instrumentation on a VH-3D test asset. These efforts are intended for placement under an existing Basic Ordering Agreement N00019-08-G-0010. SAC is the only known source with the knowledge, experience and proprietary technical data to perform the required services and provide the required materials. This synopsis is for informational purposes only. Note 22

Professional Technical Test & Evaluation Documentation Support Services (PT2E DSS)

Department of the Navy, United States Marine Corps | Published June 19, 2014  -  Deadline July 3, 2014
cpvs

  This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.   Solicitation number M68909-14-Q-7651 is issued as a Request for Quotation (RFQ).  The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-74, and the Defense Federal Acquisition Regulations Supplement Change Notice 20140506.  NAICS Code 541690 and size standard of under $14 Million applies.  This solicitation is a 100% small business set-aside.    The procurement is for a Base Year and three (3) follow-on Option Years for Professional Technical Test & Evaluation (PT2E) Documentation Support Services (DSS).  This procurement is divided into four (4) Line Items and four (4) separate prices are requested.    Item 0001: PT2E DSS - Labor in accordance with attached PWS/QASP Base Year Period of Performance:  9/1/2014 through 8/31/2015, 12 Months; and   Item 1001: PT2E DSS - Labor in accordance with attached PWS/QASP Option Year 1 Period of Performance:  9/1/2015 through 8/31/2016, 12 Months; and   Item 2001: PT2E DSS - Labor in accordance with attached PWS/QASP Option Year 2 Period of Performance:  9/1/2016 through 8/31/2017, 12 Months; and   Item 3001: PT2E DSS - Labor in accordance with attached PWS/QASP Option Year 3 Period of Performance:  9/1/2017 through 8/31/2018, 12 Months.   Funds are not presently available for option Line Items 1001, 2001, & 3001, however, the Government may unilaterally exercise those Line Items under FAR 52.217-7 on or before September 1, 2015, depending on the availability of funds.   The Marine Corps Tactical Systems Support Activity (MCTSSA) provides test, evaluation, and technical engineering support services to Marine Corps Systems Command (MCSC) for the Systems Interoperability Architectures and Technology (SIAT) Directorate.  SIAT's mission is to ensure delivery and sustainment of an integrated Enterprise Command, Control, Communications, and Computers Intelligence Surveillance Reconnaissance (C4ISR) capability to the operating forces and supporting establishments.  MCTSSA is responsible for integration testing, interoperability assessment and overall evaluation of Command and Control (C2) Systems/Program's of Record (PORs) as they evolve through the acquisitions lifecycle.  These C2 Systems/PORs form the foundation of the Marine Corps net-centric operational focus and are vital to the Marine Corps' continued success.    The Program Engineering & Support Group (PESG) and the Test & Certification Group (T&CG) are responsible for providing technical test & evaluation support to MCSC.  PESG and T&CG require the services of technical personnel experienced in preparing and editing evaluation documents such as plans, specifications, design descriptions, end-user guides etc., and test documentation such as test plans, test procedures, quick-look reports, and test reports to support a multitude of C4 systems.   All responsible vendors complying with the above description may submit a quotation, which shall be considered by MCTSSA.  The vendor's quotation shall describe in detail their technical understanding and approach to the tasks specified in the attached PWS/QASP.     The procurement is for Professional Technical Test & Evaluation (PT2E) Documentation Support Services (DSS) to be delivered to Marine Corps Tactical Systems Support Activity (MCTSSA), MCB Camp Pendleton, CA.   The following FAR provisions are incorporated by reference and apply to this acquisition: 52.212-1, 52.212-2, 52.212-3-Alt I, 52.212-4, and 52.212-5, with the following provisions under paragraph (b) & (c) incorporated by reference:  52.222-50-Alt I, 52.203-6, 52.204-10, 52.209-6, 52.209-9, 52.219-6, 52.219-8, 52.219-14, 52.219-28, 52.222-3, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.223-18, 52.222-41, 52.222-42, and 52.222-43.  Additional FAR provisions include:  52.203-3, 52.203-17, 52.204-7, 52.209-9, 52.217-3, 52.225-25, 52.228-3, 52.228-5, 52.232-39, 52.232-40, 52.237-1, 52.237-2, 52.209-7, 52.217-8, and 52.217-9.   The following DFARS provisions are incorporated by reference and apply to this acquisition:   252.203-7000, 252.203-7002, 252.203-7005, 252.204-7000, 252.204-7012, 252.204-7015, 252.209-7993, 252.225-7012, 252.226-7001, 252.232-7006, 252.232-7010, 252.237-7010, 252.243-7002, and 252.204-7004.   The full text of clauses and provisions incorporated by reference may be obtained at the following addresses:  http://www.arnet.gov/aar/, http://www.acq.osd.mil/dp/dars/dfars.html, http://web1.deskbook.osd.mil/default.asp, http://farsite.hill.af.mil.    Quotes and the completed Certifications and Representations are due to the MCTSSA Contracts Office, Box 555171, Camp Pendleton, CA 92055-5171 no later than July 3, 2014 at 12:00 pm Pacific Daylight Savings Time.    The point of contact for information regarding this solicitation is Jon Aaron at (760) 725-2295, fax (760) 725-2514, or Email jon.d.aaron@usmc.mil or.  No numbered notes apply.*****

59--The Redstone Technical Test Center (RTTC) has a requirement Hellfire GPS Antenna System

Department of the Army, U. S. Army Materiel Command | Published June 26, 2009  -  Deadline July 9, 2009
cpvs

THIS NOTICE IS PROVIDED FOR INFORMATION PURPOSES ONLY. THIS OPPORTUNITY IS AVAILABLE ONLY TO CONTRACTORS UNDER W31P4Q-09-T-0536. The Government anticipates to award a firm fixed price contract to Haigh-Farr. Inc., 43 Harvey Rd, Bedford NH, 03110-6805, for 200 Hellfire GPS Antenna Systems, part number HF8400-1. These systems must be built from an existing and proven drawing package. Haigh-Farr is the only known approved vendor for the required antenna kits for the Hellfire program. No manufacturers other than Haigh-Farr can provide these assemblies without being qualified. Only Haigh-Farr and no other source will satisfy agency requirements. All responsible sources may submit a quotation which shall be fully considered by the agency. Point of contact is Whitney Stone, Contract Specialist, telephone 256-876-1232, e-mail whitney.stone@us.army.mil.

13--The Redstone Technical Test Center (RTTC) has a requirement for detonation cords and assemblies.

Department of the Army, U. S. Army Materiel Command | Published September 6, 2008  -  Deadline September 18, 2008
cpvs

The Government anticipates to award a firm fixed price award to McCormick Selph, doing business as Pacific Scientific, 3601 Union Rd, Hollister, CA 95023. Seven types of detonation cords and assemblies are required. The part numbers are as follows: 13288512-1 (2O EACH), 13288512-2 (20 EACH), 13288512-5 (20 EACH), 13365934 (10 EACH), 13288623 (10 EACH), 823625-1 (10 EACH), AND 810483-1 (20 EACH). Pacific Scientific, and no other manufacturer can supply these goods as these systems are being built from an existing and proven drawing package, which specifies the type detonation cords and assemblies to be used. No other manufacturer can provide the detonation cords and assemblies without performing non-recurring engineering and environmental qualification, only Pacific Scientific and no other source will satisfy agency requirements. All responsible sources may submit a quotation which shall be fully considered by the agency. Point of Contact is Lisa Starbuck, Contract Specialist, telephone 256-876-3080, e-mail lisa.starbuck@us.army.mil

10--The Redstone Technical Test Center (RTTC) has a requirement for antennas.

Department of the Army, U. S. Army Materiel Command | Published December 8, 2008  -  Deadline December 24, 2008
cpvs

The Government anticipates to award a firm fixed price award to Haigh-Farr Inc, 43 Harvey Rd, Bedford NH, 03110-6805. Five types of antennas are required. The part numbers are as follows: HF3375 (30 Each), 93129322-1 (43 Each), 93129322-2 (41 Each), 93129322-3 (41 Each) and 93129322-4 (41 Each). Only Haigh-Farr can supply these goods as these systems are being built from an existing and proven drawing package. Haigh-Farr is the only known approved vendor for the required antenna kits for the Maverick program. No manufacturers other than Haigh-Farr can provide these assemblies without being qualified, which represents a substantial duplication of costs that would not likely be recovered through open competition, only Haigh-Farr and no other source will satisfy agency requirements. All responsible sources may submit a quotation which shall be fully considered by the Agency. Point of Contact is Lisa Starbuck, Contract Specialist, telephone 256-876-3080, email lisa.starbuck@us.army.mil.

66--THE REDSTONE TECHNICAL TEST CENTER (RTTC) HAS A REQUIREMENT FOR 100 GPS MODULES.

Department of the Army, U. S. Army Materiel Command | Published February 10, 2009  -  Deadline February 18, 2009
cpvs

The Government anticipates to award a firm fixed price award to Qinetiq, Inc, 2345 Crystal Dr Ste 909, Arlington, VA 22202-4802. 100 GPS Modules are required, part number Q20HD. Only Qinetiq can supply these goods as these systems are being built from an existing and proven drawing package. QinetiQ is the only known approved vendor for the required GPS receiver modules for the Hellfire program. No manufacturers other than QinetiQ can provide these assemblies without being qualified, which represents a substantial duplication of costs that would not likely be recovered through open competition, only QinetiQ and no other source will satisfy agency requirements. All responsible sources may submit a quotation which shall be fully considered by the Agency. Point of Contact is Lisa Starbuck, Contract Specialist, telephone 256-876-3080, email lisa.starbuck@us.army.mil.

15--Aviation Technical Test Center (ATTC) support for the Shadow TUAS.

Department of the Army, U. S. Army Materiel Command | Published December 4, 2007  -  Deadline December 20, 2007
cpvs

This requirement is for Flight Test Support for the Shadow Aviation Technical Test Center (ATTC). The test support will require the contract to maintain, train, and operate the Shadow TUAS in support of ATTC flight testing for Shadow TUAS air vehicl es and associated systems. This procurement is planned as sole source to AAI Corporation, CAGE 97384, Original Equipment Manufacturer of the Shadow TUAS. See note 22. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are b eing requested and a written solicitation will not be issued.

FISMA Annual Independent Audit Services

Court Services and Offender Supervision Agency, Office of the Director | Published July 15, 2016  -  Deadline August 5, 2016
cpvs

The Contractor shall perform an independent evaluation of the information security program and practices of the Agency to determine the effectiveness of such program and practices. The Contractor shall populate the FISMA IG Reporting Metrics (https://www.dhs.gov/fisma) in the U.S. Department of Homeland Security (DHS) Cyberscope FISMA Reporting System accessed through the OMB Max Portal. The Contractor staff will be required to obtain (at CSOSA's expense) a CSOSA-issued HSPD-12 PIV Smart Card. The Contractor shall perform an independent assessment of CSOSA and PSA information security program and practices, using the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-53A (As Amended) "Examine" and "Interview" assessment procedures. No technical testing will be performed under this contract. The vendor should leverage existing technical test results provided by other independent assessments. This assessment will cover the annual independent evaluation requirements under 44 U.S.C. 3553 (Annual independent evaluation) , which includes the Annual FISMA IG Reporting Metrics and populating in the DHS CyberScope FISMA Reporting system for CSOSA and PSA.  

15--Ceiling Increase Indefinite Delivery/Indefinite Quantity (IDIQ)

Department of the Army, Army Contracting Command | Published October 20, 2014  -  Deadline November 5, 2014
cpvs

The United States Army Contracting Command - Redstone Arsenal (ACC-RSA), Huntsville , Alabama on behalf of the Program Executive Office (PEO) Aviation for the Aircraft Managed by the Apache Attack Helicopter (AHH) Project Manager`s Office (PMO). ACC submits the following synopsis to announce the intent of the US Army to negotiate, on a sole source basis in accordance with 10 U.S.C. 2304(c) (1) and FAR 6.302-1, an increase in the contract ceiling W58RGZ-14-D-0045. The current contract for which this notice is issued, is a 5 year Indefinite Delivery/Indefinite Quantity (IDIQ) Cost Plus Fixed Fee (CPFF) contract awarded in March 2014.This contract modification will provide additional engineering services and technical support required for the aircraft managed by the AAH PMO. The ceiling increase will provide for the continuation of uninterrupted services and technical support to the AAH PMO. It is anticipated that this acquisition will be restricted to the Boeing Company (Cage Code 8V613), Mesa, AZ, the original Equipment Manufacturer (OEM). The contractor will be required to provide support to the AAH PMO for the various AH-64 Apache configurations in the areas of engineering and technical: testing, analysis, component and sub-system integration and qualification, program management, product assurance, and configuration management. In addition the contractor shall be required to provide materials that are incidental to the performance of the support services as required by the individual task orders issued under the contract. Interested sources should contact the above company regarding subcontracting possibilities.

58--A-KITS FOR EARLY INFANTRY BRIGADE COMBAT TEAM (E-IBCT) LOW-RATE INITIAL PRODUCTION (LRIP) AND ASSOCIATED TECHNICAL, TEST, TRAINING, AND LOGISTICS SUPPORT.

Department of the Army, U. S. Army Materiel Command | Published October 7, 2009  -  Deadline November 25, 2009
cpvs

THE U.S. ARMY TACOM CONTRACTING CENTER ANTICIPATES CONTRACTING ON A SOLE SOURCE BASIS (AUTHORITY: 10 U.S.C. 2304(C)(1), ONLY ONE RESPONSIBLE SOURCE AND NO OTHER SUPPLIES OR SERVICES WILL SATISFY AGENCY REQUIREMENTS) WITH AM GENERAL FOR BUILD, DELIVERY, AND INSTALL OF 251 A-KITS LRIP FOR THE FIRST THREE IBCT'S AND OTHER RELATED HARDWARE INSTALLATION. THIS EFFORT SUPPORTS PRODUCTION AND FIELDING OF EARLY TECHNOLOGY DEVELOPED UNDER THE FUTURE COMBAT SYSTEM (FCS) SYSTEM DEVELOPMENT AND DEMONSTATION CONTRACT, INTO THE IBCT, AND ASSOCIATED SUPPORT. THE A-KIT INTERFACES WITH A HMMWV AND INCLUDES: EQUIPMENT SHELF, A-KIT CABLES, CABLE GUARDS, EQUIPMENT GUARDS, ANTENNA RISERS, VARIOUS MOUNTING BRACKETS, B-KIT POWER REQUIREMENTS, AND ENVIRONMENTAL CONTROL UNIT. THE SUPPORT INCLUDES TESTING, TRAINING, TECHNICAL DOCUMENTATION, INTEGRATED LOGISTICS SUPPORT (ILS), FIELD SERVICE REPRESENTATION (FSR), AND SYSTEMS TECHNICAL SUPPORT (STS). BASE REQUIREMENT ? (FIRST IBCT)FY10 - DELIVERY AND INSTALLATION FY11 - FIELDING FY11 ? FY 12 ? THE SECOND AND THIRD IBCT WILL BE STRUCTURED AS OPTIONS NOTWITHSTANDING THE AGENCY?S INTENT TO CONTRACT ON A SOLE SOURCE BASIS FOR THIS REQUIREMENT, THE AGENCY SHALL CONSIDER ALL RESPONSIBLE SOURCES THAT SUBMIT A CAPABILITY STATEMENT, PROPOSAL, OR QUOTATION.

99--FUTURE COMBAT SYSTEM (FCS) SPIN OUT (SO) EARLY INFANTRY BRIGADE COMBAT TEAM (E-IBCT) LOW RATE INITIAL PRODUCTION (LRIP) AND ASSOCIATED TECHNICAL, TEST, TRAINING, AND LOGISTICS SUPPORT.

Department of the Army, U. S. Army Materiel Command | Published March 27, 2009  -  Deadline August 13, 2009
cpvs

THE U.S. ARMY TACOM LCMC ANTICIPATES CONTRACTING ON A SOLE SOURCE BASIS (AUTHORITY: 10 U.S.C 2304(C)(1), ONLY ONE RESPONSIBLE SOURCE) FOR FCS SO E-IBCT LRIP, 3 PRODUCTION SETS (INCLUDING LONG LEAD MATERIAL AND SPARES), WITH THE BOEING COMPANY ST. LOUIS, MO. THE FCS SO E-IBCT LRIP EFFORT REPRESENTS PRODUCTION AND FIELDING OF EARLY FCS TECHNOLOGIES, DEVELOPED UNDER THE FCS SYSTEM DEVELOPMENT AND DEMONSTRATION CONTRACT, INTO THE IBCT, AND ASSOCIATED SUPPORT. THE FCS TECHNOLOGIES TO BE PROCURED AS PART OF A SO E-IBCT SET INCLUDE:? NETWORK INTEGRATION KIT (NIK):O ANTENNAS AND RADIO FREQUENCY POWER AMPLIFIERS (RFPAS)FOR CURRENT FORCE (CF) VEHICLES,O INTEGRATED COMPUTER SYSTEM (ICS),O SYSTEM OF SYSTEMS COMMON OPERATING ENVIRONMENT (SOSCOE),O NETWORK MANAGEMENT SYSTEM, AND O BATTLE COMMAND (BC) SOFTWARE? UNATTENDED GROUND SENSORS (UGS) BOTH URBAN AND TACTICAL VARIANTS, ? SMALL UNMANNED GROUND VEHICLES (SUGV), AND ? CLASS 1 UNMANNED AIRCRAFT SYSTEMS (UAS). IT IS ESTIMATED THAT THE SO E-IBCT LRIP CONTRACT WILL CONSIST OF THE FIXED PRICE PROCUREMENT OF UP TO THREE (3) SO E-IBCT LRIP SETS. ? 1 E-IBCT SET AND SPARES (BASE CONTRACT) TO BE FIELDED IN FY11? 2 E-IBCT SETS AND SPARES(PRICED OPTION) TO BE FIELDED IN FY12 THE SUPPORT TO BE PROCURED AS PART OF THIS CONTRACT INCLUDES TESTING, TRAINING, INTEGRATED LOGISTICS SUPPORT (ILS), FIELD SERVICE REPRESENTATION (FSR, AND SYSTEMS TECHNICAL SUPPORT (STS). THE INITIAL AWARD TO SUPPORT THIS PROCUREMENT IS TARGETED FOR 3QFY09 AND WILL PROVIDE FOR ACQUISITION OF LONG LEAD ITEMS, FACILITIZATION, AND TOOLING. POINT OF CONTACT IS THE U.S. ARMY TACOM LCMC, CONTRACTING CENTER, AMSCC-TAC-AB/MR. JAMES DAILY, WARREN MI 48397-5000. TELEPHONE: (586) 753-2266, E-MAIL JAMES.DAILY@US.ARMY.MIL

15--Five Year IDIQ

Department of the Army, Army Contracting Command | Published August 1, 2012  -  Deadline August 22, 2012
cpvs

It is anticipated that this acquisition will be restricted to the Boeing company, Mesa, AZ. This requirement procures new engineering services and technical support, for the Apache Attack Helicopter. Original Equipment Manufacturer (OEM), Boeing. The contractor will be required to provide support to the AAH PMO for the various AH-64 Apache configurations in the areas of engineering and technical: testing, analysis, component and sub-system integration and qualification, program management, product assurance, and configuration management. In addition the contractor shall be required to provide materials that are incidental to the performance of the support services as required by the individual task orders issued under the contract. This is a follow-on requirement which the Government anticipates will be solicited and negotiated with only one source under the authority of far 6.302-1. Interested sources should contact the above company regarding subcontracting possibilities. Point of Contact(s) Reinaldo Rivera, Contract Specialist, reinaldo.rivera4@us.army.mil

41--Environmental Control Units - 9,000 BTU/hr and 18,000 BTU/hr size models

Department of the Navy, United States Marine Corps | Published August 30, 2011
cpvs

The Marine Corps Systems Command, Quantico, Virginia will be soliciting for procurement of its replacement Environmental Control Units in the 9,000 BTU/hr and 18,000 BTU/hr sized models via GSA Advantage. A planned Request for Quote (RFQ) will be released in November-December timeframe for both models. As part of the RFQ, compliant offerors will be required to provide one (a) Production Representative Sample of each model of their proposed solution on loan to the Marine Corps for approximately a 60 day evaluation period. The Marine Corps will perform technical testing on these units in support of its source selection process. Any questions to this notice shall be electronically transmitted to Marine Corps Systems Command, attention: Michelle Miller, (703) 432-3614, michelle.miller1@usmc.mil

T56 Propeller Component Improvement Program (CIP)

Department of the Navy, Naval Air Systems Command | Published July 9, 2015  -  Deadline July 24, 2015
cpvs

The Naval Air Warfare Center, Aircraft Division (NAWCAD) Contracts Department, Patuxent River, MD in support of NAVAIR 4.4, Propulsion and Power, intends to negotiate an order under Basic Ordering Agreement N00019-14-G-0001 on a sole source basis with Hamilton Sundstrand, One Hamilton Road, Windsor Locks, CT 06096, in support of the T56 Propeller Component Improvement Program (CIP). The order includes work scope found under 2016 Engineering Project Descriptions (EPDs): The Propeller CIP allows the Navy to increase the safety, reliability, and maintainability and reduce the cost of operating its propeller systems. The Navy requires technical testing, integration, maintenance, repair, logistics, hardware, and engineering support for the propellers that power Navy E-2, C-2, P-3, and C-130 aircraft. The Government intends to procure under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Hamilton is uniquely qualified to provide the complete range of program support required by the USN, USMC, and FMS fleets. Hamilton is also the only known firm to possess the technical data, drawings, and specifications necessary to fulfill the Government requirements. Given that Hamilton is the original designer and prime manufacturer and their continued involvement in the past and recent propeller system improvements, Hamilton has all the design intent information, original drawings, and most recent design changes, which are required to avoid undesirable interactions between existing and redesigned hardware. Hamilton also has immediate access to tooling, special equipment and test facilities as well as sub-vendors similar tooling and facilities. These are required to verify, design, and test new proposed engineering solutions. Privately developed data, materials, and design processes are the sole property of Hamilton. These provide Hamilton with the unique ability to identify and correct problems with the T56 Propeller. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS; however, responsible interested parties may submit information in which they can identify interest and capability to respond to this requirement. Responses must be received by 5:00 PM Eastern Time on 14 July 2015. The applicable NAICS code for this requirement is: 336413-Other Aircraft Parts and Auxiliary Equipment Manufacturing. The Government reserves the right to process the procurement on a sole source basis based upon the responses received. The Government will not pay for any information received. The point of contact is Lyle Kralle, Contract Specialist, via E-mail: lyle.kralle@navy.mil or by phone at (301) 737-2437.

16--The PEO STRI; PM ITTS; IMO in partnership with the US Army Aviation Technical Test Center (ATTC) is providing the documentation to facilitate industry planning and preparations in advance of a formal Request for Proposal.

Department of the Army, PEO STRICOM | Published November 13, 2008  -  Deadline January 7, 2009
cpvs

Objective Helicopter Icing Spray System (OHISS) Draft Document Posting The Program Executive Office for Simulation, Training and Instrumentation (PEO STRI); Project Manager for Instrumentation, Targets and Threat Simulators (PM ITTS); Instrumentation Management Office (IMO) in partnership with the US Army Aviation Technical Test Center (ATTC) is providing the documentation to facilitate industry planning and preparations in advance of a formal Request for Proposal. The documentation is the final draft versions of the Statement of Work, CDRLs, Performance Specification, source selection rating criteria, and evaluation criteria order of importance that has been submitted for approval. These documents have incorporated changes and recommendations resulting from past interaction with industry regarding this requirement. It is important to note that the funding for this effort currently has not been provided. Funding is anticipated to be secured by the end of the first quarter of FY09. All of this documentation will be uploaded to the Draft RFP Oct 08 folder that is available in the OHISS Bidders Library Site, located on the PEO STRI SharePoint Site. Interested contractors are encouraged to gain access to the OHISS Bidders Library SharePoint site to access this and other information pertinent to this acquisition. The process for gaining access to the SharePoint site is listed at the bottom of this posting. Background: Icing testing is required for Federal Aviation Administration and Military in-flight icing certification for aircraft that operate in icing conditions. ATTC currently operates the Helicopter Icing Spray System (HISS) which provides a limited low speed icing spray capability. OHISS is a program to provide an improved in-flight icing test capability with lower lifecycle costs. The requirements for this system are detailed in the attached Draft Performance Specification. Specific information regarding the Request for Proposal and submission of a proposal will be forthcoming. PM ITTS is looking for suppliers who can provide the services described in the Draft Statement of Objectives and the capability described in the Draft Performance Specification. Planned Document Posting Schedule: 4 Nov 08 Posting of the Draft SOW, Performance Specifications, CDRLs, source selection criteria, evaluation criteria, Factors and sub-factor order of importance. 7 12 Nov 08 Draft RFP issued 7 Jan 08 RFP Issued 16 Jan 08 Letter of intent to propose 9 Feb 08 Proposal Submission 17-27 Feb 08 Oral Presentations Apr 08 Contract Award Questions pertaining to the posted information may be submitted via e-mail to Mr. Duane St. Peter, Contract Specialist, duane.stpeter@us.army.mil. Instructions to gain access to the OHISS Bidders Library SharePoint Site. 1. Request and receive a U.S. Army AKO account from the following website: www.us.army.mil. Please use Mr. Darrell Wright as your sponsor if one is required. An e-mail confirmation will be sent to you when the account has been activated. 2. Once you receive your AKO account, Mr. Wright will request a PEO STRI Account. An e-mail will be sent providing an initial password and access information for the PEO STRI Intranet. 3. Once the account is established, Mr. Luis Pineiro will coordinate access to the OHISS Bidders Library Site. An e-mail will be sent providing a link to the OHISS Bidders Library Site.

Install Pond Liners at Uvalde National Fish Hatchery, Uvalde, Texas

Department of the Interior, Fish and Wildlife Service | Published March 29, 2011
cpvs

The U.S. Fish and Wildlife Service, Region 2, Division of Contracting and General Services plans to issue a Request for Quote (F11PS00522), which will be posted on 4/1/2011. The Contractor shall furnish all the necessary personnel, material, equipment, services to provide the following: 1. Provide the necessary re-grading of pond bottom to allow water to drain as shown on the plans and re-grading the side-slopes to remove all blemishes and vegetation to allow the installation. 2. Provide the necessary geo-technical testing. 3. Install Government Furnished geo-membrane liner in the pond. The job site is located Uvalde National Fish Hatchery located in Uvalde, Texas.The magnitude for this project is between $100,000 and $250,000. This request for quotation will be advertised as a Small Business set-aside, which is open to all small businesses. We are seeking certified Small Business contractors in the North American Industry Classification System (NAICS) code of 238990- All other specialty trade contractors/$14 Million.. The solicitation will be posted on FED BIZ OPPS via the National Business Center (NBC) website http://ideasec.nbc.gov/j2ee/login.jsp, use the quick search box to access the solicitation by number (F11PS00521). Postings will also be linked to the NBC via the Federal Business Opportunities website at www.fbo.gov. Be advised; you must be registered in the Central Contractor Registration (CCR) to participate; offerors that are not registered will be rejected. Website: http://www.ccr.gov. The CCR Help desk number is 888-227-2423.

FY17 T56 Propeller Component Improvement Program (CIP)

Department of the Navy, Naval Air Systems Command | Published July 5, 2016  -  Deadline July 20, 2016
cpvs

The Naval Air Warfare Center, Aircraft Division (NAWCAD) Contracts Department, Patuxent River, MD in support of NAVAIR 4.4, Propulsion and Power, intends to negotiate an order under Basic Ordering Agreement N00019-14-G-0001 on a sole source basis with Hamilton Sundstrand, One Hamilton Road, Windsor Locks, CT 06096, in support of the T56 Propeller Component Improvement Program (CIP). The order includes work scope found under 2017 Engineering Project Descriptions (EPDs): The Propeller CIP allows the Navy to increase the safety, reliability, and maintainability and reduce the cost of operating its propeller systems.  The Navy requires technical testing, integration, maintenance, repair, logistics, hardware, and engineering support for the propellers that power Navy E-2, C-2, P-3, and C-130 aircraft. The Government intends to procure under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements.  Hamilton is uniquely qualified to provide the complete range of program support required by the USN, USMC, and FMS fleets.  Hamilton is also the only known firm to possess the technical data, drawings, and specifications necessary to fulfill the Government requirements.  Given that Hamilton is the original designer and prime manufacturer and their continued involvement in the past and recent propeller system improvements, Hamilton has all the design intent information, original drawings, and most recent design changes, which are required to avoid undesirable interactions between existing and redesigned hardware.  Hamilton also has immediate access to tooling, special equipment and test facilities as well as sub-vendors similar tooling and facilities.  These are required to verify, design, and test new proposed engineering solutions.  Privately developed data, materials, and design processes are the sole property of Hamilton.  These provide Hamilton with the unique ability to identify and correct problems with the T56 Propeller.  THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS; however, responsible interested parties may submit information in which they can identify interest and capability to respond to this requirement.  Responses must be received by 5:00 PM Eastern Time on 20 July 2016.  The applicable NAICS code for this requirement is: 336413-Other Aircraft Parts and Auxiliary Equipment Manufacturing.  The Government reserves the right to process the procurement on a sole source basis based upon the responses received.  The Government will not pay for any information received.  The point of contact is Lyle Kralle, Contract Specialist, via E-mail: lyle.kralle@navy.mil or by phone at (301) 757-0156.