Public tenders for contracting in St-johns-nl Canada

Find all Consulting tenders in the world.
Finding business opportunities has never been easier.

Results for consulting. Make a new search!

Request for Supply Arrangements General Contracting Services - Quebec Region

Parks Canada | Published January 14, 2016  -  Deadline February 23, 2016
cpvs

Request for Supply Arrangements (SA). The Parks Canada Agency requires the services of General Contractors in the Quebec Region to manage all aspects of a number of as and when required multi discipline projects that may include the demolition, renovation and construction of various equipment, services or structures. It will also be the responsibility of the general contractor to plan, organize and control the work, health and safety of all tradesmen working on any project under their management. Complete details of skills and responsibilities of the General Contractor are detailed in the Scope of Work included herein as Annex “B”. Contracts resulting from the creation of SA’s will include (but will not be limited to) the following trade categories: Electrician; Plumbing; Carpentry; Painting and Decorating; Floor Covering Installation; Roofer (Shingled and Built-up); Bricklayer; Cabinet Maker; Concrete Finisher; Fire protection, Gas Fitter; Glazier; Locksmith; Oil Burner Mechanic; Power line Technicians; Heating Ventilation and Air-Conditioning Mechanic; restoration Stone Mason; Sheet Metal Workers; Sprinkler System Installers; Steamfitters/Pipefitters; Tile setter; Welder; Gypsum Board and Plasterer; Acoustical Ceiling Installer/Repairer.

Request for Supply Arrangements, General Construction – Roads, Grounds and related Contracting Services for Prince Edward Island National Park, Parks Canada

Parks Canada | Published March 7, 2016
cpvs

The Parks Canada Agency requires the services of General Construction – Roads, Grounds and related Contracting Services for Prince Edward Island National Park to manage all aspects of a number of, as and when required, multi discipline projects that may include construction, alteration or repair of roads, landscaping services, supply of heavy equipment and labour for (but not limited to) post hole diggers, trenchers, bulldozers, backhoes, graders, cranes, hymacs, loaders, paving machines, rollers, etc. Provide services for the demolition of buildings and infrastructure including disposal of demolished materials. Supply of materials for roads and grounds projects including (but will not be limited to), shale, sand, gravel, asphalt, riprap stone, salt, calcium, cement and precast concrete products. It will also be the responsibility of the general contractor to plan, organize and control the work, health and safety of all tradesmen working on any project under their management. Complete details of skills and responsibilities of the General Contractor are detailed in the Scope of Work included herein as Annex “B” Contracts resulting from the creation of SA’s will include (but will not be limited to) the following trade categories: Heavy Equipment Operator: Electrician; Plumbing; Carpentry; Labourer; Painting; Bricklayer; Concrete Finisher; Fire protection, Gas Fitter; Glazier; Power line Technician; Stone Mason; Sheet Metal Worker; Steamfitters/Pipefitter; Tile setter.

Request for Supply Arrangements General Contracting Services for Northern Ontario Field Unit. Parks Canada

Parks Canada | Published June 6, 2016  -  Deadline July 18, 2016
cpvs

Request for Supply Arrangements (SA). The Parks Canada Agency requires the services of General Contractors in Northern Ontario Field Unit to manage all aspects of a number of as and when required multi discipline projects that may include the demolition, renovation and construction of various equipment, services or structures, Electrician; Plumbing; Carpentry; Painting and Decorating; Floor Covering Installation; Roofer (Shingled and Built-up); Bricklayer; Cabinet Maker; Concrete Finisher; Fire protection, Gas Fitter; Glazier; Locksmith; Oil Burner Mechanic; Power line Technicians; Heating Ventilation and Air-Conditioning Mechanic; restoration Stone Mason; Sheet Metal Workers; Sprinkler System Installers; Steamfitters/Pipefitters; Tile setter; Welder; Gypsum Board and Plasterer; Acoustical Ceiling Installer/Repairer alteration or repair of roads, landscaping services, supply of heavy equipment and labour for (but not limited to) post hole diggers, trenchers, bulldozers, backhoes, graders, cranes, hymacs, loaders, paving machines, rollers, etc. Provide services for the demolition of buildings and infrastructure including disposal of demolished materials. Supply of materials for roads and grounds projects including (but will not be limited to), shale, sand, gravel, asphalt, riprap stone, salt, calcium, cement and precast concrete products .

Duration of the Supply Arrangement:

The Supply Arrangement will be valid for two (2) years from the date of issue with the option for two (2) one-year extensions.

  1. Contracts resulting from the SA can range from any amount up to $200,000 (applicable taxes included).

Request for Supply Arrangements, General Contracting and Renovation Services for Prince Edward Island Field Unit. Parks Canada

Parks Canada | Published February 26, 2016
cpvs

Request for Supply Arrangements (SA). The Parks Canada Agency requires the services of General Contractors in Prince Edward Island to manage all aspects of a number of as and when required multi discipline projects that may include the demolition, renovation and construction of various equipment, services or structures. It will also be the responsibility of the general contractor to plan, organize and control the work, health and safety of all tradesmen working on any project under their management. Complete details of skills and responsibilities of the General Contractor are detailed in the Scope of Work included herein as Annex “B”. Contracts resulting from the creation of SA’s will include (but will not be limited to) the following trade categories: Electrician; Plumbing; Carpentry; Painting and Decorating; Floor Covering Installation; Roofer (Shingled and Built-up); Bricklayer; Cabinet Maker; Concrete Finisher; Fire protection, Gas Fitter; Glazier; Locksmith; Oil Burner Mechanic; Power line Technicians; Heating Ventilation and Air-Conditioning Mechanic; restoration Stone Mason; Sheet Metal Workers; Sprinkler System Installers; Steamfitters/Pipefitters; Tile setter; Welder; Gypsum Board and Plasterer; Acoustical Ceiling Installer/Repairer.

Duration of the Supply Arrangement:

The Supply Arrangement will be valid for two (2) years from the date of issue with the option for two (2) one-year extensions.

  1. Contracts resulting from the SA will typically range anywhere between $5,000 to $200,000.

Videoscope for the RCMP Edmonton

Royal Canadian Mounted Police | Published March 29, 2016
Winner
Non-Destructive Testing Products Limited
cpvs

Solicitation Number: M5000-16-3894/A

Organization Name: Royal Canadian Mounted Police (RCMP)

Notice Description: Videoscope for the Royal Canadian Mounted Police

Competitive Procurement Strategy:

Open Bidding

APPLICABLE TRADE AGREEMENTS:

Agreement on Internal Trade (AIT)

NATURE OF REQUIREMENT:

To supply and deliver to the Royal Canadian Mounted Police (RCMP) “K” Division Air Services Unit in Edmonton, Alberta one (1) Videoscope.

SECURITY: There is no security requirement associated with the requirement.

EVALUATION PROCEDURES:

Bids will be assessed in accordance with the entire requirement of the bid solicitation. An evaluation team composed of representatives of Canada will evaluate the bids.

BASIS OF SELECTION:

A bid must comply with the requirements of the bid solicitation and meet all mandatory technical evaluation criteria to be declared responsive. The responsive bid with the lowest evaluated price will be recommended for award of a contract.

DEBRIEFINGS:

Bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within 15 working days of receipt of the results of the bid solicitation process. The debriefing may be in writing, by telephone or in person.

Delivery Date: The Crown is requesting delivery by March 31st. 2016

Inquiries regarding this Request for Proposal requirement are to be submitted to the Contracting Authority listed below:

Joanne Maybroda

Telephone No.: 780-670-8627

Fax No.: 780-454-4527

Email: Joanne.Maybroda@rcmp-grc.gc.ca

The Crown retains the right to negotiate with suppliers on any procurement.

For more information on The RCMP National Procurement Plan for fiscal year 2015-2016 please visit: http://www.RCMP-grc.gc.ca/pubs/cm-gg/index-eng.htm

Contract Field Nusing Services Officer - Ottawa, Ontari and Campbellton, New Brunswick

Veterans Affairs Canada | Published February 22, 2016
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   51019-154029/A Donovan, Janine PWB Telephone No. - (506) 636-5347  Fax No. - (506) 636-4376   Contracting Nursing Services for Veterans Affairs Canada - Ottawa, Ontario and Campbellton, New Brunswick  Veterans Affairs Canada (VAC) has a requirement for the provision of nursing consultation serices in Ottawa Ontario and Campbellton, New Brunswick. The period of the contract is from April 1, 2016, or date of award, to March 31, 2017 with options to extend for one (1) additional one (1) year period.  This document contains a security requirement.  All proposed personnel to provide nursing consultation services must meet the following:  -Graduation with a degree from a recognized university with an acceptable specialization in nursing; -A certificate of current registration as a Registered Nurse or as a Registered Psychiatric Nurse in the province where the work is to be performed. -Twenty-four months equivalence of full time experience as a Registered Nurse or Registered Psychiatric Nursewithin the last seven (7) years providing nursing care to adults; or, supervising or teaching the nursing care of adults. -Six (6) months equivalence of full time experience as a Registered Nurse (within the last seven (7) years) providing nursing care to adults with mental health conditions; or, supervising or teaching the practice of nursing of adults with mental health conditions; Hold of valid driver's license in the province where the work is to be performed.   Inquiries: All inquiries of atechnical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Janine Donovan, telephone - (506) 636-5347, facsimile - (506) 636-4376, e-mail - janine.donovan@pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than seven (7) calendar days prior to the closing date to allow sufficient time to respond. Inquiries are to be made in accordance with Part 2.4 Enquiries - Bid Solicitation in the solicitation document.   Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.   This PWGSC office provides procurement services to the public in both official languages.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Janitorial Services – RCMP St-Pierre-Jolys Detachment

Royal Canadian Mounted Police | Published March 23, 2016
Winner
Last Call to Clean it All
cpvs

Janitorial Services - RCMP St-Pierre-Jolys Detachment, St-Pierre-Jolys, Manitoba To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), St-Pierre-Jolys Detachment, St-Pierre-Jolys, Manitoba, during the period of the contract. The period of the Contract is for twenty-four (24) months with an irrevocable option to renew for two (2) additional twelve (12) month periods. Routine daily cleaning is required three (3) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded. The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded. Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Thursday, April 09, 2015 at 2:00 p.m. Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. The Crown retains the right to negotiate with suppliers on any procurement. The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services - RCMP Iqaluit Headquarters Building and RCMP Iqaluit Air Services Hanger

Royal Canadian Mounted Police | Published March 21, 2016
Winner
C&K Services Ltd.
cpvs

To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), Iqaluit Headquarters Building and the Royal Canadian Mounted Police (RCMP), Iqaluit Air Services Hanger during the period of the contract.  The period of the Contract is for twelve (12) months with an irrevocable option to renew for two (2) additional twelve (12) month periods.  Routine daily cleaning is required five (5) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded.  The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded.   Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Tuesday March 10, 2015 at 10:00 a.m.   Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  The Crown retains the right to negotiate with suppliers on any procurement.  The RCMP has published its National Procurement Plan for 2014/15.  For further information please see link:  http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services – RCMP Rocky Mountain House Detachment

Royal Canadian Mounted Police | Published March 21, 2016
Winner
Connie Vanderbaaren
cpvs

Janitorial Services – RCMP Rocky Mountain House Detachment, in Alberta  To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), Rocky Mountain House Detachment, in Alberta, during the period of the contract.  The period of the Contract is for twelve (12) months with an irrevocable option to renew for one (1) additional twelve (12) month period.  Routine daily cleaning is required five (5) days per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded.  The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded.  Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Wednesday, July 22, 2015 at 10:00 a.m.  Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  The Crown retains the right to negotiate with suppliers on any procurement.  The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services – RCMP Red Deer Rural Detachment

Royal Canadian Mounted Police | Published March 21, 2016
Winner
DeBlanc Cleaning Services Ltd.
cpvs

Janitorial Services - RCMP Red Deer Rural Detachment, Red Deer, Alberta To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), Red Deer Rural Detachment, Red, Deer, Alberta, during the period of the contract. The period of the Contract is for twelve (12) months with an irrevocable option to renew for one (1) additional twelve (12) month period. Routine daily cleaning is required five (5) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded. The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded. Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Tuesday, July 28, 2015 at 10:00 a.m. Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. The Crown retains the right to negotiate with suppliers on any procurement. The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services – RCMP Prince Albert North District Building, Prince Albert, Saskatchewan

Royal Canadian Mounted Police | Published March 21, 2016
Winner
Triple B Janitorial
cpvs

Janitorial Services – RCMP Prince Albert North District Building, Prince Albert, Saskatchewan To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), Prince Albert North District Building, Prince Albert, Saskatchewan, during the period of the contract. The period of the Contract is for twenty-four (24) months with an irrevocable option to renew for two (2) additional twelve (12) month periods. Routine daily cleaning is required five (5) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded. The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded. Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Tuesday April 14, 2015 at 10:00 a.m. Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. The Crown retains the right to negotiate with suppliers on any procurement. The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services – RCMP West Edmonton Business Park

Royal Canadian Mounted Police | Published March 21, 2016
Winner
VALO Maintenance
cpvs

Janitorial Services - RCMP West Edmonton Business Park, Edmonton, Alberta To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), West Edmonton Business Park, Edmonton, Alberta, during the period of the contract. The period of the Contract is for twenty-four (24) months with an irrevocable option to renew for two (2) additional twelve (12) month periods. Routine daily cleaning is required two (2) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded. The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded. Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Wednesday, April 08, 2015 at 2:00 p.m. Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. The Crown retains the right to negotiate with suppliers on any procurement. The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm

Janitorial Services – RCMP Dauphin Detachment

Royal Canadian Mounted Police | Published March 21, 2016
Winner
Clark Cleaning Ltd.
cpvs

Janitorial Services - RCMP Dauphin Detachment, Dauphin, Manitoba

To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex A and Appendix A-1 and A-2 - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), Dauphin Detachment, Dauphin, Manitoba, during the period of the contract.

The period of the Contract is for twenty-four (24) months with an irrevocable option to renew for one (1) additional twelve (12) month period.

Routine daily cleaning is required five (5) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded.

The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded.

Optional Site Visit:

It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Wednesday, November 4, 2015 at 2:00 p.m.

Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.

The Crown retains the right to negotiate with suppliers on any procurement.

The RCMP has publishedits National Procurement Plan for 2014/15. Forfurtherinformation please see link:http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htmor http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-fra.htm

Unmanned Air Vehicles (UAVs)

Royal Canadian Mounted Police | Published December 16, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: Aeryon Labs Inc. 575 Kumpf Drive Waterloo Ontario Canada N2V1K3 Nature of Requirements: M4500-163313/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Unmanned Aircraft System Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agencyintends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Royal Canadian Mounted Police (RCMP), J Division has a requirement for the supply and delivery of one (1) Unmanned Aircraft System (UAV) with the option to purchase three (3) additional UAVs. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements 1 The system must be able to take off and land vertically. 2 The system must have the ability to land and take off automatically. 3 The entire system, including ground control station, battery, payload and air vehicle, must be man packable and carried by a single operator. 4 The System must be able to be folded or disassembled for compact transport and storage. 5 System must be supplied with a hard case for packing chargers/batteries, and spare parts as well as a padded soft backpack for the UAV and associated controller items for field deployment. The backpack shall be of such dimensions that the entire system can easily be carried by one person. 6 The air vehicle system, including control of air vehicle and control of camera, must be able to be operated by a single operator. 7 Notwithstanding current Transport Canada regulations, the system must be capable of beingsafely flown beyond line of site at low altitude (<500ft) 3 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 7500 using a ground control application with automated precision control. system must be supplied 1multi-charger (120vac min pockets) and sufficient batteries to allow for continuous operation. able operate in altitudes up feet above sea level. entire including controller weatherproof rain, snow, dust salt air conditions. parts such as arms, legs payloadsmust interchangeable the field without tools. flight logs automatically recorded. include date, time location of flight, complete path any faults encountered during flight. customer retrievable. provide diagnostic self-check signal on start-up. real battery status, telemetry, link gps status fault information sent pilot's information. unit have standard navigational lighting that can turned or off required. vehicle not cause radio interference rcmp systems accept from same. demonstrated ability fly volatile environments (chemical gas high voltage power lines). built tolerance no less than fifty (so) minutes single payload. range at least 1km los handheld controller. use google maps microsoft bing all components minimum operating temperature -25c +40c. useable video stabilized sustained winds 65km h gusts 90km h. this requirement if required by contracting authority 24 Minimum requirement for turnaround time (battery change time) is no more than three minutes. 25 Minimum requirement for setup and launch time of system is no more than five minutes. 26 GPS accuracy minimum requirement is+/- 2 metres The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) The Aeryon SkyRanger is the only UAV on the market that meets or exceed the mandatory requirements. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products thatmust be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. The product must be delivered on or before February 28, 2016. The estimated value of the contract is $667,423.00 HST extra Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how thesupplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 31, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Nanostring nCounter Sprint

Agriculture and Agri-Food Canada | Published September 2, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  Nanostring Technologies, Inc. 530 Fairview Avenue North Suite 2000 Seattle Washington United States 98109 Nature of Requirements:   01799-170311/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Nanostring nCounter Sprint  Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Nanostring nCounter Sprint.  It is a device used to analyze differential expression of genes and proteins.   It used to research projects on plant genomics, physiology and molecular biology.      Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements:  Mandatory Requirements  Item 1.  An integrated system which employs digital barcode technology to hybridize with target molecules to yield precise and sensitive quantification. Up to 800 targets can be measured simultaneously in a single sample, and up to 12 samples can be assayed in a single run.   A NanosSring nCounter Sprint profiler NCT-SPRINT-3Y, Installation and training, 12 month warranty including parts and labor.  Item 2.  Two years maintenance service contract beyond first 12 months.  The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) - World Trade Organization  Agreement on Government Procurement (WTO-AGP)  The reason for single tendering is; only one firm is capable of performing the contract.  The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d)   Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technicalreasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;  Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists;  The product must be delivered on or beforeMarch 31, 2017.  The estimated value of the contract is $231,231.00 HST extra  Suppliers' right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets theadvertised requirements.  Closing date and time for accepting statements of capabilities:   Submissions must be received on or by 2:00 p.m. September 20, 2016.   Inquiries and statement of capabilities are to be directed to:  Sandra Lomax, Supply Officer   Public Works and Government Services Canada 189 Prince William St Saint John, NB   E2L 2B9   Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Simrad EK80 Scientific Echo Sounder System

Fisheries and Oceans Canada | Published August 8, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Kongsberg Mesotech Ltd. 261 Brownlow Avenue Dartmouth Nova Scotia Canada B3B2B6 Nature of Requirements:   Simrad EK80 Scientific Echo Sounder System  F5238-160090/A Johnston, Edward PWB Telephone No. - (506) 636-4416 Fax No. - (506) 636-4376  1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community thata department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  2. Definition of the requirement Public Works and Government Services Canada (PWGSC), on behalf of its client, Fisheries and Oceans Canada has requirement for the supply and deliver of a Simrad EK80 Scientific Echo Sounder System consisting of:  1. EK80 Split Beam Wideband Transceivers (WBTs) for (4) frequency split beam transducers 2. Transducers 3. Wideband Autonomous Transceiver (WBAT) 4. M3 Sonar Tag Activator System 5. Pan Tilt Head Unit 6. Calibration Spheres  The scientific echo sounder and multi-beam systems requested are to look for fish and other organisms in the water column.  They also provide a mechanism to quantify the abundance and distribution of fish and invertebrates for stock assessment and ecosystem studies.  The required equipment is to upgrade the existing technology which is 10-15 years old. As such it must be compatible with the existing equipment currently in use and must be able to re-produce results to current standards.  All proposed equipment is specifically designed to be portable so that it canbe used on multiple research vessels.  3. This procurement is subject to the following trade agreements: - Agreement on Internal Trade (AIT) - World Trade Organization  Agreement on Government Procurement (WTO-AGP) - North American Free Trade Agreement (NAFTA)  4.Justification for the Pre-Identified Supplier Sole source justification is supported by the following:  The Kongsberg Maritime Ltd. is the only known authorized Canadian distributor for the Simrad EK80 Scientific Echo Sounder System.  Kongsberg does not authorize value-added resellers or distributors for their equipment in Canada.   All software developed and currently in use to analyse the existing technology is compatible with the new EK80 M3 and broad band systems and backward compatible.  Fisheries and Oceans existing transducers currently used for research and surveying are interchangeable with new EK80 system.  5. Government Contracts Regulations Exception(s) The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work".   6. Exclusions and/or Limited Tendering Reasons The following exclusions and or limited tendering reasons are invoked:  AIT - Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  NAFTA- Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietaryinformation or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;  WTO- Article XV.1 (b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists;  7. The product must be delivered on or before March 31, 2017.  8. The estimated value of the contract is $441,248.00 HST extra  9. Name and address of the pre-identified supplier:  Kongsberg Maritime Ltd.  261 Brownlow Avenue  Dartmouth, Nova Scotia  B3B2B6  10. Suppliers' right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meetsthe advertised requirements.  11. Closing date and time for accepting statements of capabilities:    Submissions must be received on or by 2:00 p.m. August 23, 2016.   12. Inquiries and statement of capabilities are to be directed to:  Edward Johnston, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB, E2L 2B9  Telephone No. (506) 636-4416 Fax No. (506) 636-4376 Email: edward.johnston@pwgsc.gc.ca    Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Rotary Screw Trap

Fisheries and Oceans Canada | Published January 22, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  E. G. Solutions, Inc. PO Box 2437 Corvallis Oregon United States 97339 Nature of Requirements:   F4775-150004/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Rotary Screw Trap   Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Public Works and Government Services Canada (PWGSC), on behalf of its client, Department of Fisheries and Oceans has a requirement for the supply and delivery of Rotary Screw Trap.   Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements:  Mandatory Requirements  - Rotary Screw Trap (RST) must have 5' diameter 4 blade cone capture drum. - Capture drum/cone exterior must be constructed of perforated stainless steel with perforations no larger than 5/32". - RST must have clean-out doors (Two doors in the tapered portion of the cone) in order to clean out drum of debris (e.g., large branches, leaves) safely and efficiently. - RST must have 22' long x 24" wide pontoons with a cleat to each pontoon along the outboard side. - RST must havesafety hand-rail handrails along the inboard side of each pontoon and across the deck facing the cone, short handrail across each pontoon forward of the crossbeams, and safety guards around all the moving shafts near the livebox. - RST must have smoothbottomed, continuously water circulation, live well. - Live well must have "eddy" area for captured fish to rest in. - Live well must have automatic cleaning feature to expel collected debris requiring no external power source (remote site). - Live well must prevent escape of salmonid specimens 50mm and larger and accommodate locking. - RST purchase must include the specialized trailer with down straps for transport - RST capture efficiency MUST be comparable to RST's already in use in DFO to maintain ability to compare with existing data sets across river systems.  In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines.  The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA)   The reason for single tendering is; only one firm is capableof performing the contract.  The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d)   Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services,including software to the extent that the initial procurement of the software was covered by this Chapter;   The product must be delivered on or before March 31, 2016.  The estimated value of the contract is $50,750.00 HST not included  Suppliers right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  Closing date and time for accepting statements of capabilities:   Submissions must be received on or by 2:00 p.m. January 4, 2016.   Inquiries and statement of capabilities are to be directed to:  Sandra Lomax, Supply Specialist  Public Works and Government Services Canada 189 Prince William St Saint John, NB   E2L 2B9   Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca   Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Automated Library Prep Station

Agriculture and Agri-Food Canada | Published November 25, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: Illumina Canada, Inc. 5200 Illumina Way San Diego California United States 92122 Nature of Requirements: 01799-160705/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Automated Library Prep Station Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. The Department of Agriculture and Agri-Food Canada hasrequirement to provide one (1) NeoPrep Library System. It is an automated robotic system that will prepare libraries for Illumina next-generation sequencing. It will develop genetic markers for selection and breeding, gene expression indicators for fertilizer and potato storage management and viral diagnostic methods. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Item 1. An integratedsystem to prepare libraries for Illumina next-generation sequencing (NGS) platforms. Prepare sixteen (16) libraries per run without user intervention and provide uninterrupted walk away time. A platform that can generate quantified and normalized sequencing-ready libraries and delivers high-quality and reproducible results even from low amounts of DNA or RNA. An on-instrument touchscreen and internal computer, NeoPrep Control Software, barcode scanner and 12 month warranty. Item 2. One year maintenance service contract. Includes full coverage for parts, labor and travel; reagent replacement upon hardware failures; 1 preventative maintenance visit per year; remote Technical Support; 3 business day average on-site response; hardware/software updates; on-site applications support; and discounts on advanced training. One year maintenance service contract to take effect when the 12 month warranty in item 1 expires. The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; The estimated value of the contract is $60,000.00 Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 10, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer

Agriculture and Agri-Food Canada | Published December 11, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: BRUKER LTD. 555 Steeles Ave East Milton Ontario Canada L9T1Y6 Nature of Requirements: 01913-160967/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating tothe supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer. It is used to study the structure of molecules. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Magnet: Shielded 14.1 Tesla (1H operating frequency of 600 MHz) superconducting narrow bore Amplifiers: 1H 300 Watt minimum pulse power X 500 Watt minimum pulse power Y 500 Watt minimum pulse power Gradient: 40 Gauss/cm minimum Automation: Sample Changer (24 sample minimum) for solution NMR including spinners Software: The system must supplied with acquisition and processing (1D, 2D, and 3D) software. Probes: A) Solution 10 mm broad band observe (31P 15N minimum) with a single axis gradient. The probe must be tunable through automation. B) 4-mm gradient semi-solid high resolution magic angle spinning (HR-MAS) triple-resonance (1H/31P/13C) probe with a lock (2D) channel. It must able be able to perform triple resonance experiments (observe 1H, 31P, or 13C and simultaneously decouple the other two nuclei). It must be able to generate a gradient of at least 40 Gauss/cm (minimum) along the magic angle. Samples must be able to be changed without removal of the probe. C) 4-mm dual resonance (1H/X) MAS probe. It must tunable from 31P to 15N (minimum). Samples must be able to be changed without removal of the probe. D) 2.5-mm triple resonance (1H/X/Y) MAS probe. The X channel must tunable from 15N to 13C and the Y channel from 13C to 31P (minimal ranges). Samples must be able to be changed without removal of the probe. Additional Accessories: - Variable Temperature Controller and accessories required for low temperature operation - Magic Angle Spinning Control unit (including spinning rate counter, stabilization and sample eject) The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works ofart or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists; The product must be delivered on or before March 31, 2016. The estimated value of the contract is $1,350,000.00 HST extra Suppliers' right to submit a statement of capabilities: Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities: Submissions must be received on or by 2:00 p.m. December 29, 2015. Inquiries and statement of capabilities are tobe directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Ultra High Performance Liquid Chromatography System

National Research Council Canada | Published December 14, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: Agilent Technologies Canada Inc. 6705 Millcreek Unit 5 Mississauga Ontario Canada L5N5M4 Nature of Requirements: 31028-157037/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Ultra High Performance Liquid Chromatography System Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, National Research Council Canada has a requirement for the supply and delivery of Ultra High Performance Liquid Chromatography System. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements 1. The UHPLC must be compatible to operate with existing SCIEX 4000 and SCIEX 5500 QTRAP Mass Spectrometry instruments. 2. The instrument must include a binary high pressure pump able to operate up to 5mL/min. 3. The pump must contain a degassing unit, purge valve, and automated seal wash. 4. The instrument must include an auto-sampler which has to operate with both vials and 96-wellplates with a sample capacity higher than 1000 samples and a sample volume up to 100µl. 5. The auto-sampler must have the capacity for an outer needle wash and seat backflush to reduce carryover. 6. The temperature of the sample tray of the auto-sampler must be adjustable to 4 to 40°C. 7. The instrument must include a Multicolumn Thermostat with a temperature range up to 100°C. 8. The instrument must include a compatible 2 position, 6 port valve. 9. The instrument must include a Diode Array Detector with a 10nm flow cell and a wavelength range from 190 to 640nm. 10. The instrument must include all the necessary tubing, connectors, and cables. 11. The instrument must allow for fast and efficient method transfer to and from othersystems. 12. The system must include software to control all parts of the instrument and record and save the runs and chromatograms. 13. The instrument must be controllable through the Analyst® software of the existing SCIEX 5500 QTRAP to allow for more efficient operation. 14. A suitable bench for the instrument and the operation of the instrument must be provided by the vendor In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines. The procurement is subject to the following trade agreement: - North American Free Trade Agreement (NAFTA - Agreement on Internal Trade (AIT) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts orcontinuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; The product must be delivered on or before February 12, 2016. The estimated value of the contract is $120,620.16 HST included Suppliers right to submit a statement of capabilities: Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for acceptingstatements of capabilities: Submissions must be received on or by 2:00 p.m. December 30, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.