Public tenders for contracting in Saint-john Canada

Find all Consulting tenders in the world.
Finding business opportunities has never been easier.

Results for consulting. Make a new search!

Contract Field Nusing Services Officer - Ottawa, Ontari and Campbellton, New Brunswick

Veterans Affairs Canada | Published February 22, 2016
cpvs

Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   51019-154029/A Donovan, Janine PWB Telephone No. - (506) 636-5347  Fax No. - (506) 636-4376   Contracting Nursing Services for Veterans Affairs Canada - Ottawa, Ontario and Campbellton, New Brunswick  Veterans Affairs Canada (VAC) has a requirement for the provision of nursing consultation serices in Ottawa Ontario and Campbellton, New Brunswick. The period of the contract is from April 1, 2016, or date of award, to March 31, 2017 with options to extend for one (1) additional one (1) year period.  This document contains a security requirement.  All proposed personnel to provide nursing consultation services must meet the following:  -Graduation with a degree from a recognized university with an acceptable specialization in nursing; -A certificate of current registration as a Registered Nurse or as a Registered Psychiatric Nurse in the province where the work is to be performed. -Twenty-four months equivalence of full time experience as a Registered Nurse or Registered Psychiatric Nursewithin the last seven (7) years providing nursing care to adults; or, supervising or teaching the nursing care of adults. -Six (6) months equivalence of full time experience as a Registered Nurse (within the last seven (7) years) providing nursing care to adults with mental health conditions; or, supervising or teaching the practice of nursing of adults with mental health conditions; Hold of valid driver's license in the province where the work is to be performed.   Inquiries: All inquiries of atechnical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Janine Donovan, telephone - (506) 636-5347, facsimile - (506) 636-4376, e-mail - janine.donovan@pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than seven (7) calendar days prior to the closing date to allow sufficient time to respond. Inquiries are to be made in accordance with Part 2.4 Enquiries - Bid Solicitation in the solicitation document.   Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.   This PWGSC office provides procurement services to the public in both official languages.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Unmanned Air Vehicles (UAVs)

Royal Canadian Mounted Police | Published December 16, 2015
cpvs

Trade Agreement: NONE Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: Aeryon Labs Inc. 575 Kumpf Drive Waterloo Ontario Canada N2V1K3 Nature of Requirements: M4500-163313/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Unmanned Aircraft System Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agencyintends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Royal Canadian Mounted Police (RCMP), J Division has a requirement for the supply and delivery of one (1) Unmanned Aircraft System (UAV) with the option to purchase three (3) additional UAVs. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements 1 The system must be able to take off and land vertically. 2 The system must have the ability to land and take off automatically. 3 The entire system, including ground control station, battery, payload and air vehicle, must be man packable and carried by a single operator. 4 The System must be able to be folded or disassembled for compact transport and storage. 5 System must be supplied with a hard case for packing chargers/batteries, and spare parts as well as a padded soft backpack for the UAV and associated controller items for field deployment. The backpack shall be of such dimensions that the entire system can easily be carried by one person. 6 The air vehicle system, including control of air vehicle and control of camera, must be able to be operated by a single operator. 7 Notwithstanding current Transport Canada regulations, the system must be capable of beingsafely flown beyond line of site at low altitude (<500ft) 3 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 7500 using a ground control application with automated precision control. system must be supplied 1multi-charger (120vac min pockets) and sufficient batteries to allow for continuous operation. able operate in altitudes up feet above sea level. entire including controller weatherproof rain, snow, dust salt air conditions. parts such as arms, legs payloadsmust interchangeable the field without tools. flight logs automatically recorded. include date, time location of flight, complete path any faults encountered during flight. customer retrievable. provide diagnostic self-check signal on start-up. real battery status, telemetry, link gps status fault information sent pilot's information. unit have standard navigational lighting that can turned or off required. vehicle not cause radio interference rcmp systems accept from same. demonstrated ability fly volatile environments (chemical gas high voltage power lines). built tolerance no less than fifty (so) minutes single payload. range at least 1km los handheld controller. use google maps microsoft bing all components minimum operating temperature -25c +40c. useable video stabilized sustained winds 65km h gusts 90km h. this requirement if required by contracting authority 24 Minimum requirement for turnaround time (battery change time) is no more than three minutes. 25 Minimum requirement for setup and launch time of system is no more than five minutes. 26 GPS accuracy minimum requirement is+/- 2 metres The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) The Aeryon SkyRanger is the only UAV on the market that meets or exceed the mandatory requirements. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products thatmust be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. The product must be delivered on or before February 28, 2016. The estimated value of the contract is $667,423.00 HST extra Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how thesupplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 31, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Nanostring nCounter Sprint

Agriculture and Agri-Food Canada | Published September 2, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  Nanostring Technologies, Inc. 530 Fairview Avenue North Suite 2000 Seattle Washington United States 98109 Nature of Requirements:   01799-170311/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Nanostring nCounter Sprint  Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Nanostring nCounter Sprint.  It is a device used to analyze differential expression of genes and proteins.   It used to research projects on plant genomics, physiology and molecular biology.      Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements:  Mandatory Requirements  Item 1.  An integrated system which employs digital barcode technology to hybridize with target molecules to yield precise and sensitive quantification. Up to 800 targets can be measured simultaneously in a single sample, and up to 12 samples can be assayed in a single run.   A NanosSring nCounter Sprint profiler NCT-SPRINT-3Y, Installation and training, 12 month warranty including parts and labor.  Item 2.  Two years maintenance service contract beyond first 12 months.  The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) - World Trade Organization  Agreement on Government Procurement (WTO-AGP)  The reason for single tendering is; only one firm is capable of performing the contract.  The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d)   Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technicalreasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;  Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists;  The product must be delivered on or beforeMarch 31, 2017.  The estimated value of the contract is $231,231.00 HST extra  Suppliers' right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets theadvertised requirements.  Closing date and time for accepting statements of capabilities:   Submissions must be received on or by 2:00 p.m. September 20, 2016.   Inquiries and statement of capabilities are to be directed to:  Sandra Lomax, Supply Officer   Public Works and Government Services Canada 189 Prince William St Saint John, NB   E2L 2B9   Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Simrad EK80 Scientific Echo Sounder System

Fisheries and Oceans Canada | Published August 8, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Kongsberg Mesotech Ltd. 261 Brownlow Avenue Dartmouth Nova Scotia Canada B3B2B6 Nature of Requirements:   Simrad EK80 Scientific Echo Sounder System  F5238-160090/A Johnston, Edward PWB Telephone No. - (506) 636-4416 Fax No. - (506) 636-4376  1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community thata department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  2. Definition of the requirement Public Works and Government Services Canada (PWGSC), on behalf of its client, Fisheries and Oceans Canada has requirement for the supply and deliver of a Simrad EK80 Scientific Echo Sounder System consisting of:  1. EK80 Split Beam Wideband Transceivers (WBTs) for (4) frequency split beam transducers 2. Transducers 3. Wideband Autonomous Transceiver (WBAT) 4. M3 Sonar Tag Activator System 5. Pan Tilt Head Unit 6. Calibration Spheres  The scientific echo sounder and multi-beam systems requested are to look for fish and other organisms in the water column.  They also provide a mechanism to quantify the abundance and distribution of fish and invertebrates for stock assessment and ecosystem studies.  The required equipment is to upgrade the existing technology which is 10-15 years old. As such it must be compatible with the existing equipment currently in use and must be able to re-produce results to current standards.  All proposed equipment is specifically designed to be portable so that it canbe used on multiple research vessels.  3. This procurement is subject to the following trade agreements: - Agreement on Internal Trade (AIT) - World Trade Organization  Agreement on Government Procurement (WTO-AGP) - North American Free Trade Agreement (NAFTA)  4.Justification for the Pre-Identified Supplier Sole source justification is supported by the following:  The Kongsberg Maritime Ltd. is the only known authorized Canadian distributor for the Simrad EK80 Scientific Echo Sounder System.  Kongsberg does not authorize value-added resellers or distributors for their equipment in Canada.   All software developed and currently in use to analyse the existing technology is compatible with the new EK80 M3 and broad band systems and backward compatible.  Fisheries and Oceans existing transducers currently used for research and surveying are interchangeable with new EK80 system.  5. Government Contracts Regulations Exception(s) The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work".   6. Exclusions and/or Limited Tendering Reasons The following exclusions and or limited tendering reasons are invoked:  AIT - Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  NAFTA- Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietaryinformation or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;  WTO- Article XV.1 (b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists;  7. The product must be delivered on or before March 31, 2017.  8. The estimated value of the contract is $441,248.00 HST extra  9. Name and address of the pre-identified supplier:  Kongsberg Maritime Ltd.  261 Brownlow Avenue  Dartmouth, Nova Scotia  B3B2B6  10. Suppliers' right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meetsthe advertised requirements.  11. Closing date and time for accepting statements of capabilities:    Submissions must be received on or by 2:00 p.m. August 23, 2016.   12. Inquiries and statement of capabilities are to be directed to:  Edward Johnston, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB, E2L 2B9  Telephone No. (506) 636-4416 Fax No. (506) 636-4376 Email: edward.johnston@pwgsc.gc.ca    Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Rotary Screw Trap

Fisheries and Oceans Canada | Published January 22, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  E. G. Solutions, Inc. PO Box 2437 Corvallis Oregon United States 97339 Nature of Requirements:   F4775-150004/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Rotary Screw Trap   Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Public Works and Government Services Canada (PWGSC), on behalf of its client, Department of Fisheries and Oceans has a requirement for the supply and delivery of Rotary Screw Trap.   Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements:  Mandatory Requirements  - Rotary Screw Trap (RST) must have 5' diameter 4 blade cone capture drum. - Capture drum/cone exterior must be constructed of perforated stainless steel with perforations no larger than 5/32". - RST must have clean-out doors (Two doors in the tapered portion of the cone) in order to clean out drum of debris (e.g., large branches, leaves) safely and efficiently. - RST must have 22' long x 24" wide pontoons with a cleat to each pontoon along the outboard side. - RST must havesafety hand-rail handrails along the inboard side of each pontoon and across the deck facing the cone, short handrail across each pontoon forward of the crossbeams, and safety guards around all the moving shafts near the livebox. - RST must have smoothbottomed, continuously water circulation, live well. - Live well must have "eddy" area for captured fish to rest in. - Live well must have automatic cleaning feature to expel collected debris requiring no external power source (remote site). - Live well must prevent escape of salmonid specimens 50mm and larger and accommodate locking. - RST purchase must include the specialized trailer with down straps for transport - RST capture efficiency MUST be comparable to RST's already in use in DFO to maintain ability to compare with existing data sets across river systems.  In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines.  The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA)   The reason for single tendering is; only one firm is capableof performing the contract.  The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d)   Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services,including software to the extent that the initial procurement of the software was covered by this Chapter;   The product must be delivered on or before March 31, 2016.  The estimated value of the contract is $50,750.00 HST not included  Suppliers right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  Closing date and time for accepting statements of capabilities:   Submissions must be received on or by 2:00 p.m. January 4, 2016.   Inquiries and statement of capabilities are to be directed to:  Sandra Lomax, Supply Specialist  Public Works and Government Services Canada 189 Prince William St Saint John, NB   E2L 2B9   Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca   Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Automated Library Prep Station

Agriculture and Agri-Food Canada | Published November 25, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: Illumina Canada, Inc. 5200 Illumina Way San Diego California United States 92122 Nature of Requirements: 01799-160705/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Automated Library Prep Station Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. The Department of Agriculture and Agri-Food Canada hasrequirement to provide one (1) NeoPrep Library System. It is an automated robotic system that will prepare libraries for Illumina next-generation sequencing. It will develop genetic markers for selection and breeding, gene expression indicators for fertilizer and potato storage management and viral diagnostic methods. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Item 1. An integratedsystem to prepare libraries for Illumina next-generation sequencing (NGS) platforms. Prepare sixteen (16) libraries per run without user intervention and provide uninterrupted walk away time. A platform that can generate quantified and normalized sequencing-ready libraries and delivers high-quality and reproducible results even from low amounts of DNA or RNA. An on-instrument touchscreen and internal computer, NeoPrep Control Software, barcode scanner and 12 month warranty. Item 2. One year maintenance service contract. Includes full coverage for parts, labor and travel; reagent replacement upon hardware failures; 1 preventative maintenance visit per year; remote Technical Support; 3 business day average on-site response; hardware/software updates; on-site applications support; and discounts on advanced training. One year maintenance service contract to take effect when the 12 month warranty in item 1 expires. The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; The estimated value of the contract is $60,000.00 Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 10, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer

Agriculture and Agri-Food Canada | Published December 11, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: BRUKER LTD. 555 Steeles Ave East Milton Ontario Canada L9T1Y6 Nature of Requirements: 01913-160967/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating tothe supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer. It is used to study the structure of molecules. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Magnet: Shielded 14.1 Tesla (1H operating frequency of 600 MHz) superconducting narrow bore Amplifiers: 1H 300 Watt minimum pulse power X 500 Watt minimum pulse power Y 500 Watt minimum pulse power Gradient: 40 Gauss/cm minimum Automation: Sample Changer (24 sample minimum) for solution NMR including spinners Software: The system must supplied with acquisition and processing (1D, 2D, and 3D) software. Probes: A) Solution 10 mm broad band observe (31P 15N minimum) with a single axis gradient. The probe must be tunable through automation. B) 4-mm gradient semi-solid high resolution magic angle spinning (HR-MAS) triple-resonance (1H/31P/13C) probe with a lock (2D) channel. It must able be able to perform triple resonance experiments (observe 1H, 31P, or 13C and simultaneously decouple the other two nuclei). It must be able to generate a gradient of at least 40 Gauss/cm (minimum) along the magic angle. Samples must be able to be changed without removal of the probe. C) 4-mm dual resonance (1H/X) MAS probe. It must tunable from 31P to 15N (minimum). Samples must be able to be changed without removal of the probe. D) 2.5-mm triple resonance (1H/X/Y) MAS probe. The X channel must tunable from 15N to 13C and the Y channel from 13C to 31P (minimal ranges). Samples must be able to be changed without removal of the probe. Additional Accessories: - Variable Temperature Controller and accessories required for low temperature operation - Magic Angle Spinning Control unit (including spinning rate counter, stabilization and sample eject) The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works ofart or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists; The product must be delivered on or before March 31, 2016. The estimated value of the contract is $1,350,000.00 HST extra Suppliers' right to submit a statement of capabilities: Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities: Submissions must be received on or by 2:00 p.m. December 29, 2015. Inquiries and statement of capabilities are tobe directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Ultra High Performance Liquid Chromatography System

National Research Council Canada | Published December 14, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: Agilent Technologies Canada Inc. 6705 Millcreek Unit 5 Mississauga Ontario Canada L5N5M4 Nature of Requirements: 31028-157037/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Ultra High Performance Liquid Chromatography System Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, National Research Council Canada has a requirement for the supply and delivery of Ultra High Performance Liquid Chromatography System. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements 1. The UHPLC must be compatible to operate with existing SCIEX 4000 and SCIEX 5500 QTRAP Mass Spectrometry instruments. 2. The instrument must include a binary high pressure pump able to operate up to 5mL/min. 3. The pump must contain a degassing unit, purge valve, and automated seal wash. 4. The instrument must include an auto-sampler which has to operate with both vials and 96-wellplates with a sample capacity higher than 1000 samples and a sample volume up to 100µl. 5. The auto-sampler must have the capacity for an outer needle wash and seat backflush to reduce carryover. 6. The temperature of the sample tray of the auto-sampler must be adjustable to 4 to 40°C. 7. The instrument must include a Multicolumn Thermostat with a temperature range up to 100°C. 8. The instrument must include a compatible 2 position, 6 port valve. 9. The instrument must include a Diode Array Detector with a 10nm flow cell and a wavelength range from 190 to 640nm. 10. The instrument must include all the necessary tubing, connectors, and cables. 11. The instrument must allow for fast and efficient method transfer to and from othersystems. 12. The system must include software to control all parts of the instrument and record and save the runs and chromatograms. 13. The instrument must be controllable through the Analyst® software of the existing SCIEX 5500 QTRAP to allow for more efficient operation. 14. A suitable bench for the instrument and the operation of the instrument must be provided by the vendor In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines. The procurement is subject to the following trade agreement: - North American Free Trade Agreement (NAFTA - Agreement on Internal Trade (AIT) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts orcontinuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; The product must be delivered on or before February 12, 2016. The estimated value of the contract is $120,620.16 HST included Suppliers right to submit a statement of capabilities: Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for acceptingstatements of capabilities: Submissions must be received on or by 2:00 p.m. December 30, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Trail Revitalization,Fundy Nat Park, NB

Public Works and Government Services Canada | Published May 9, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Trail Revitalization,Fundy Nat Park, NB  EC015-162780/A Bysterveldt, Crystal Telephone No. - (902) 940-7122 (    ) Fax No. - (506) 636-4376 (    )  Public Works and Government Services Canada (PWGSC) is inviting qualified Design-Build (D-B) bidders to design and construct the enhancement and expansion of the specified trails outlined in the terms of reference at Fundy National Park, New Brunswick.  This work is to be completed by December 1, 2017.  The objective of this RFP is to retain an individual Contractor or Joint Venture to provide the complete design-build work for the enhancement and expansion of the specified trails outlined in the terms of reference at Fundy National Park, New Brunswick.  This is a single phase selection process.This RFP Document sets out the project requirement, i.e., the particulars of the project itself and the broad scope of services required from the Contractor.  The bidders describe their capabilities and proposed services in the "Technical Portion" of the submission. The "Price Portion" includes the proposed price and bid security which is submitted in a sealed envelope.  Evaluation is based on a set of pre-established criteria, components and weight factors. Numerical technical scores are awarded at the completion of the technical evaluation.  INQUIRIES: All inquiries of a technical nature and all questions of a contractual nature are to be submitted to the Contracting Authority:  Crystal Bysterveldt, crystal.bysterveldt@pwgsc.gc.ca, facsimile:(506)636-4376. Inquiries are to be made in writing and should be received no less than seven (7) calendar days prior to the closing date to allow sufficient time to respond.  The estimated cost of this procurement is between $1,500,001.00- $2,000,000.00  This PWGSC office provides procurement services to the public in both official languages.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Public Address System, Daniel J. MacDonald Building

Veterans Affairs Canada | Published June 2, 2016
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   51019-164004/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Public Address System, Daniel J MacDonald Building, Prince Edward Island  The Department of Veterans Affaris Canada requires the supply, delivery and installation of a Public Address System for the Daniel J. MacDonald Building.    It is mandatory that the Bidder or representative of the Bidder visit the work site.  Arragnements have been made for the site visit to be held at 161 Grafton St, Charlotetown, Prince Edward Island on June 21, 2016.  The site visit will begin at 10:00 am.  Bidders must communicate with the contracting Authority no later than June 17, 2016 to confirm attendance and provide the name(s) of the person(s) who will attend.  Bidders will be required to sign an attendance sheet.  Bidders should confirm in their bid that they have attended the site vist.  Bidders who do no attend the mandatory site vist or do not send a representative will not be given an alternative appointment and their bid will be delcared non-responsive.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  New measures related to Integrity provisions included in the solicitation documents requires attention.  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Sandra Lomax, telephone - (506) 636-4362, facsimile - (506) 636-4376, email -sandra.lomax@pwgsc.gc.ca.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.   Firm intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS).  Addenda, when issued, will be available on GETS. Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provided procurement services to the public in both official languages  Documents may be submitted in either official language of Canada  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Cleaning Services - St. Andrew's Biological Station, St. Andrews, New Brunswick

Public Works and Government Services Canada | Published March 10, 2017
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Cleaning Services - St. Andrew's Biological Station, St. Andrews, New Brunswick  EC645-172635/A Johnston, Edward PWB Telephone No. - (506) 636-4416 Fax No. - (506) 636-4376  Public Works and Government Services Canada (PWGSC) has a requirement for the furnishing of all labour, materials, tools, supervision and equipment necessary for complete and satisfactory cleaning/janitorial services at the St. Andrew's Biological Station located in St. Andrews, New Brunswick. All work is to be completed in accordance with the Specification forming part of the bid document.   The Service Contract is for a period of May 1, 2017 to April 30, 2019, with option to renew for one additional year.  NOTICE OF OPTIONAL SITE VISIT It is recommended that the Bidder or a representative of the Bidder visit the work site and examine the Scope of the Work required and the existing conditions. There will be an optional site visit on March 28, 2017 at 10:00 am. All interested bidders are to meet the main entrance of the St. Andrew's Biological Station, St. Andrews, New Brunswick. Bidders must communicate with the Contracting Authority no later than three days before the scheduled visit to confirm attendance and provide the names of the person(s) who will attend. Although not mandatory, all contractors wishing to submit a tender for this work are encouraged to attend to become familiar with all aspects of the work. Any clarifications or changes to the bid solicitation resulting from the site visit will be included asan amendment to the bid solicitation.  New measures related to Integrity Provisions are included in the solicitation documents requires attention.  Inquiries:  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Edward Johnston, telephone - (506) 636-4416, facsimile - (506) 636-4376, email  edward.johnston@pwgsc.gc.ca.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provides procurement services to the public in both official languages.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Maintenance Services - Building Cleaning Joseph A. Ghiz Building Summerside, Prince Edward Island

Public Works and Government Services Canada | Published February 18, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Maintenance Services - Building Cleaning Joseph A. Ghiz Building Summerside, Prince Edward Island  E0226-162345/A Johnston, Edward PWB Telephone No. - (506) 636-3142 Fax No. - (506) 636-4376  Public Works & Government Services Canada (PWGSC) has a requirement for the furnishing of all labour,  supervision, tools, equipment and cleaning materials  required to provide building cleaning services at the Joseph A. Ghiz Building,  275 Pope Road, Summerside, Prince Edward Island.  All work is to beperformed in accordance with the specifications for PWGSC Project Number R.079561.001 forming part of the bid document.  NOTICE OF OPTIONAL SITE VISIT It is recommended that the Bidder or a representative of the Bidder visit the work site.  The site visit will be held on Wednesday, February 24, 2016 at 1:30pm.  Contractors are asked to meet at the Joseph A. Ghiz Building (Front Desk), 275 Pope Road, Summerside, PEI.  Bidders are requested to communicate with the Contracting Authority 2 day(s) beforethe scheduled visit to confirm attendance and provide the name(s) of the person(s) who will attend.  Bidders may be requested to sign an attendance form.  Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  The Service Contract is from April 1, 2016 to March 31, 2017, with an option to renew for two additional one year periods.  Bid security is a requirement for this tender.  New measures related to Integrity Provisions are included in the solicitation documents requires attention.  Inquiries:  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Edward Johnston, telephone - (506) 636-3142, facsimile - (506) 636-4376, email  edward.johnston@pwgsc.gc.ca.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued byPublic Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provides procurement services to the public in both official languages.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Moncton GOCB Annex- Cladding & Roof - Moncton, NB

Public Works and Government Services Canada | Published September 6, 2016
cpvs

Trade Agreement: WTO-AGP/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Moncton GOCB Annex Roof & Cladding - Moncton, NB  EC015-171369/A Ellis-Herring , Alison PWB Telephone No. - (506) 636-3908 Fax No. - (506) 636-4376  Work under this contract includes the replacement of exterior cladding on the Moncton Government of Canada Building, including the replacement of the lower roof and associated skylight. All work is to be performed in accordance with the plans and specifications for PWGSC Project Number R.067623.001 forming part of the bid document. The contract completion date is one hundred and eight (108) weeks from date of award.  Site of Work is at: Moncton GOCB Annex, 1081 Main St., Moncton, N.B.  New measures related to Code of Conduct and certifications includedin the solicitation documents requires attention.   The estimated cost for this opportunity is within the following category:$8,500,001- $9,000,000 (HST extra). Standard bid and contract security for construction is required.   OPTIONAL SITE VISIT It is recommended that the Bidder or a representative of the Bidder visit the work site and examine the Scope of the Work required and the existing conditions.  There will be an optional site visit September 20, 2016 at 9:00 a.m.  All interested bidders are to meet at the main entrance of the Moncton GOCB, 1045 Main Street, Monctpn, NB.  Although not mandatory, all contractors wishing to submit a tender for this work are encouraged to attend to become familiar with all aspects of the work.   There is a security clearance required to attend this site visit.  ALL interested bidders must submit the full name(s), home address(es) and date(s) of birth of the person(s) who will attend to the Contracting Authority, Alison Ellis-Herring, by fax at (506) 636-4376 or e-mail alison.ellis-herring@pwgsc-tpsgc.gc.ca by 9:00 hours, September 19, 2016.  Bidders may be requested to sign an attendance form.  Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment tothe bid solicitation.  Please note that this will be the only site visit for this project.  No other site visits will be arranged during the tender period.   Inquiries: All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Alison Ellis-Herring, telephone - (506) 636-3908, facsimile - (506) 636-4376 e-mail - alison.ellis-herring@pwgsc.gc.ca. Inquiries are to be made in writing and should be received noless than five (5) calendar days prior to the closing date to allow sufficient time to respond.  Inquiries are to be made in accordance with SI03  Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document.   Firms intending to submit tenders on this project should obtain tender documents through the Government ElectronicTendering System (GETS). Addenda, when issued, will be available on GETS. Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents.The standard documentsare issued by Public Works and Government Services andmay be viewed at buyandsell.gc.ca.   This PWGSC office provides procurement services to the public in both official languages.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Carleton Martello Tower Continued Investigations

Public Works and Government Services Canada | Published May 6, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   EC373-170067/A Donovan, Janine PWB Telephone No. - (506) 636-5347  Fax No. - (506) 636-4376   Carleton Martello Tower Continued Investigations  Public Works and Government Services Canada has a requirement for continued investigations at CarletonMartello Tower, Saint John, New Brunswick. The work consists of concrete exploratory openings and inspection of brick vault at Carleton Martello Tower, a National Historic Site and federally designated heritage building operated by Parks Canada. The Contractor shall perform and complete the Work described in the specifications and plans for project number R.076330.001 beginning June 27, 2016 and completing the work by July 31, 2016,   It is recommended that the Bidder or a representative of the Bidder visit the work site.  The site visit will be held on Wednesday, May 18th, 2016 at 11:00 AM.  Bidders are asked to meet at the main entrance of Carleton Martello Tower, Saint John, New Brunswick. Bidders are requested to communicate with the Contracting Authority 2 day(s) before the scheduled visit to confirm attendance and provide the name(s) of the person(s) who will attend.  Bidders may be requested to sign an attendance form.  Bidders who do not attend or send a representative will not be given analternative appointment but they will not be precluded from submitting a bid.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.NOTE: All bidders attending the site visit must wear hard hats.   New measures related to Codeof Conduct and certifications included in the solicitation documents requiresattention.   The estimated cost for this opportunity is within the following category: $100,001 - $250,000 (HST excluded). Standard bid and contract security for construction is required.  Inquiries: All inquiries of a technical nature and all questions of a contractual nature are to be submittedin writing to the Contractual Authority: Janine Donovan, telephone - (506) 636-5347, facsimile - (506) 636-4376, e-mail - janine.donovan@pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than five (5) calendar days prior tothe closing date to allow sufficient time to respond. Inquiries are to be made inaccordance with SI02 - Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document.   Firms intending to submit tenders onthis project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents areissuedby Public Works and Government Services and may be viewed at buyandsell.gc.ca.   This PWGSC office provides procurement services to the public in both official languages.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Supply and Install Metal Roofing Building F-110 Dorchester Penitentiary, Dorchester, NB

Correctional Service of Canada | Published July 29, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Supply and Install Metal Roofing Building F-110 Dorchester Penitentiary, Dorchester, NB  21C22-170002/A Johnston, Edward PWB Telephone No. - (506) 636-4416 Fax No. - (506) 636-4376   CORCAN Construction has a requirement for the supply and installation of a new metal roof at Building F-110 Dorchester Peniteniary, Dorchester, New Brunswick.  All work is to be performed in accordance with the plans and specifications for Project Number R.80785.001 forming part of the bid document.  The Contractor shall complete the work by November 18, 2016.  Mandatory Site Visit It is mandatory that the Bidder or representative of the Bidder visit the work site.  Arrangements have been made for the site visit to be held at 4902 Main Street, Dorchester, New Brunswick on August 09, 2016.  The site visit will begin at 10:00 am at Building F-114 Dorchester Penitentiary.  Bidders must communicate with the Contracting Authority no later than August 05, 2016 to confirm attendance and provide the name(s) of the person(s) who will attend.  Bidders will be required to sign an attendance sheet.  Bidders should confirm in their bid that they have attended the site visit.  Bidders who do no attend the mandatory site visit or do not send a representative will not be givenan alternative appointment and their bid will be declared non-responsive.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  New measures related to Integrityprovisions included in the solicitation documents requires attention.  The estimated cost for this opportunity is within the following cost category: $100,001 to $250,000 (HST extra). Standard bid and contract security for the construction is required.  A public bid opening will be held at the Bid Receiving Unit, Room 405, 189 Prince William Street, Saint John, N.B.  Inquiries:  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Edward Johnston, telephone - (506) 636-4416, facsimile - (506) 636-4376, email Edward.johnston@pwgsc.gc.ca.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  Inquiries are to be made in accordance with S103  Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document.  Standard bid and contract security for construction is required.  Firm intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS).  Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents.  The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provided procurement services to the public in both official languages.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Stonework Restorations, Building A1, Dorchester Penitentiary, Dorchester, NB

Public Works and Government Services Canada | Published July 25, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Stonework Restorations, Building A1, Dorchester Penitentiary, Dorchester, NB  EC016-170672/A Ellis-Herring , Alison PWB Telephone No. - (506) 636-3908  Fax No. - (506) 636-4376   Work under this contract consists of conservation work to the heritage stone masonry at Administration Building A1 at Dorchester Penitentiary. The work is generally described as follows: .1 Repointing of stone masonry walls. .2 Repairs to damaged stone units. .3 Installation of replacement stone units. .4 Removal of existing caulking around openings and replacement with new caulking. .5 Installation of new water deviators and new metal flashings at roof level as indicated on drawings. .6 Cleaning of historic stone units. All work is to be performed in accordance with the plans and specifications for Project Number: R.061890.001 forming part of the bid document. The estimate for this opportunity is within the following cost category:  $2,500,001 - $3,000,000 (HST extra).  Bids are submitted following a two-envelope procedure in which Bidders submit the technical component of their bid in one envelope and the proposed price in a second envelope.  The Contractor shall perform and complete the work by March 31, 2017.   New measures related to integrity provisions included in the solicitation documents requires attention.  OPTIONAL SITE VISIT  There will be a site visit on August 9, 2016 at 10:00 AM. Interested bidders are to meet at building A1 of the Dorchester Penitentiary, Dorchester, New Brunswick.  A CPIC will not be required for the site visit, however, in order to attend you MUST submit your name and company information to the contracting officer by e-mail at alison.ellis-herring@pwgsc.gc.ca or by fax at (506) 636-4376 by no later than 10:00am  August 5, 2016. Names received after this time may not be allowed on site by CSC.   Inquiries: All inquiries of atechnical nature and all questionsof a contractual nature are to be submitted in writing to the Contractual Authority: Alison Ellis-Herring, telephone- (506 ) 636-3908, facsimile - (506) 636-4376, e-mail - alison.ellis-herring@pwgsc.gc.ca. Inquiries are to be made in writing and shouldbe received no less than five (5) calendardays prior to the closing date to allow sufficient time to respond.  Inquiries are to be made in accordance with SI02 - Enquiries during the Solicitation Period, under Special Instructions to Bidders in thesolicitation document.  Standard bid and contract security for construction is required.   Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.   Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may beviewed atbuyandsell.gc.ca.    Delivery Date:Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

New Government of Canada Building (GOCB), Saint-Léonard, New Brunswick

Public Works and Government Services Canada | Published February 25, 2016
cpvs

Trade Agreement: WTO-AGP/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   New Government of Canada Building (GOCB), Saint-Léonard, New Brunswick  EC015-162530/A Johnston, Edward PWB Telephone No. - (506) 636-3142 Fax No. - (506) 636-4376  Public Works and Government Services Canada has a requirement to construct a new Government of Canada Building (GOCB) located in Saint-Léonard, New Brunswick.  The Work under this Contract will include, but is not limited to the supply of all labour, materials, and equipment necessary for the general construction of a new GOCB and a separate Cold Storage Building.  The Work also includes associated site and civil work; including landscaping, asphalt paving and any necessary remedial work.  All work is to be performed in accordance with the plans and specifications for PWGSC Project Number R.069499.001 forming part of the bid document.  The Contractor shall complete the work within one hundred and ten (110) weeks from award.  OPTIONAL SITE VISIT: It is recommended that the Bidder or a representative of the Bidder visit the work site.  The site visit will be held on Tuesday, March 08, 2016 at 11:00 AM.  Bidders are asked to meet at the corner of Laplante Road and Saint-Jean Street, Saint-Léonard, NB.  Bidders are requested to communicate with the Contracting Authority 2 day(s) before the scheduled visit to confirm attendance and provide the name(s) of the person(s) who will attend.  Bidders may be requested to sign an attendance form.  Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  New measures related to Integrity Provisions are included in the solicitation documents requires attention.  The estimated cost for this opportunity is within the following cost category: greater than $5,000,000 (HST excluded). Standard bid and contract security for the construction is required.  A public bid opening will be held at the Bid Receiving Unit,Room 405, 189 Prince William Street, Saint John, N.B  Inquiries:  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Edward Johnston, telephone - (506) 636-3142, facsimile - (506) 636-4376, email  edward.johnston@pwgsc.gc.ca.  Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond. Inquiries are to be made in accordance with S103 - Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document.  Standard bid and contract security for construction is required.  Firms intending to submit tenders on this project shouldobtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.  Standard terms and conditions for this procurement are incorporatedby reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.  This PWGSC office provides procurement services to the public in bothofficial languages  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Janitorial Services - 5 CDSB Gagetown, New Brunswick

Department of National Defence | Published February 11, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   W0105-16E021/A Donovan, Janine PWB Telephone No. - (506) 636-5347  Fax No. - (506) 636-4376   Janitorial Services - 5 CDSB Gagetown, New Brunswick  The Department of National Defence has a requirement for the furnishing of all cleaning  materials, labour, tools, equipment, supervision, travel and profit required to provide complete janitorial services for the various buildings located at 5 CDSB Gagetown (Base) and the 5 CDSB  Gagetown Range and Training area (RTA) located in New Brunswick.  All work is to be completed in accordance with the Specification Number L-G2-9900/1659 forming part of the bid document. The Service Contract is required for the period from May 1, 2016 to March 31, 2018 with an option to extend for three additional one yearp eriods.   It is mandatory that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for the site visit to be held at 5 CDSB Gagetown on March 1st, 2016 and March 2nd, 2016. The site visit will begin at 8:00 am on March 1st.  Interested bidders are to meet at the Contracts Office in Building 18 at 5 CDSB Gagetown.  Bidders must communicate with the Contracting Authority no later than 4:00 pm Friday, February 26th, 2016 to confirm attendance and provide the name(s) of the person(s) who will attend. Bidders will be required to sign an attendance sheet. Bidders should confirm in their bid that they have attended the site visit. Bidders who do not attend the mandatory site visit for the full duration or do notsend a representative will not be given an alternative appointment and their bid will be declared non-responsive. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation  This document contains a security requirement.  IMPORTANT NOTICE:  New measures related to Code of Conduct and certifications included in the solicitation documents requires attention.  Enquiries: All inquiries are to be submitted in writing tothe contractual Authority:  Janine Donovan, telephone - (506) 636-5347, facsimile -(506) 636-4376 E-mail: janine.donovan@pwgsc.gc.ca  Enquiries are to be made in accordance with the Bid Solicitation Document, Part 2- Bidders Instructions, Article 3.Enquiries - Bid Solicitation.  Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS.   Standard terms and conditions for this procurement are incorporated by reference, and form part ofthetender andcontract documents. The standard documents are issued by Public Works and GovernmentServices and may be viewed at buyandsell.gc.ca.  This PWGSC office provides procurementservices to the public in both official languages.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Videoscope for the RCMP Edmonton

Royal Canadian Mounted Police | Published March 29, 2016
Winner
Non-Destructive Testing Products Limited
cpvs

Solicitation Number: M5000-16-3894/A

Organization Name: Royal Canadian Mounted Police (RCMP)

Notice Description: Videoscope for the Royal Canadian Mounted Police

Competitive Procurement Strategy:

Open Bidding

APPLICABLE TRADE AGREEMENTS:

Agreement on Internal Trade (AIT)

NATURE OF REQUIREMENT:

To supply and deliver to the Royal Canadian Mounted Police (RCMP) “K” Division Air Services Unit in Edmonton, Alberta one (1) Videoscope.

SECURITY: There is no security requirement associated with the requirement.

EVALUATION PROCEDURES:

Bids will be assessed in accordance with the entire requirement of the bid solicitation. An evaluation team composed of representatives of Canada will evaluate the bids.

BASIS OF SELECTION:

A bid must comply with the requirements of the bid solicitation and meet all mandatory technical evaluation criteria to be declared responsive. The responsive bid with the lowest evaluated price will be recommended for award of a contract.

DEBRIEFINGS:

Bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within 15 working days of receipt of the results of the bid solicitation process. The debriefing may be in writing, by telephone or in person.

Delivery Date: The Crown is requesting delivery by March 31st. 2016

Inquiries regarding this Request for Proposal requirement are to be submitted to the Contracting Authority listed below:

Joanne Maybroda

Telephone No.: 780-670-8627

Fax No.: 780-454-4527

Email: Joanne.Maybroda@rcmp-grc.gc.ca

The Crown retains the right to negotiate with suppliers on any procurement.

For more information on The RCMP National Procurement Plan for fiscal year 2015-2016 please visit: http://www.RCMP-grc.gc.ca/pubs/cm-gg/index-eng.htm

Janitorial Services – RCMP St-Pierre-Jolys Detachment

Royal Canadian Mounted Police | Published March 23, 2016
Winner
Last Call to Clean it All
cpvs

Janitorial Services - RCMP St-Pierre-Jolys Detachment, St-Pierre-Jolys, Manitoba To provide all labour, materials, equipment, transportation and daily site supervision necessary to provide janitorial services in accordance with the Request for Proposal and Annex “A” - Janitorial Services, for the Royal Canadian Mounted Police (RCMP), St-Pierre-Jolys Detachment, St-Pierre-Jolys, Manitoba, during the period of the contract. The period of the Contract is for twenty-four (24) months with an irrevocable option to renew for two (2) additional twelve (12) month periods. Routine daily cleaning is required three (3) times per week. Hours to work of the cleaning staff will be determined by the Contractor and Royal Canadian Mounted Police (RCMP) prior to contract being awarded. The Contractor and their staff MUST be security cleared by the Royal Canadian Mounted Police (RCMP) and MAY be required to provide Contract Financial Security, prior to the Contract being awarded. Optional Site Visit: It is highly recommended that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for a tour of the work site. The site visit will be held on Thursday, April 09, 2015 at 2:00 p.m. Bidders must contact the Contracting Authority five (5) day(s) prior to the scheduled site visit to confirm attendance and provide the name(s) of the person(s) who will be attending. Bidders may be requested to provide Government Identification and to sign a Site Visit Attendance form. Bidders who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. The Crown retains the right to negotiate with suppliers on any procurement. The RCMP has published its National Procurement Plan for 2014/15. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmpgrc. gc.ca/pubs/cm-gg/index-fra.htm