Public tenders for construction in Mills United States

Find all Construction tenders in the world.
Finding business opportunities has never been easier.

Results for construction. Make a new search!

56--Laguna Fencing BPA Call

Department of the Interior, Bureau of Reclamation | Published December 30, 2015
cpvs

Construction Material and Supply Services BPA - Laguna Fencing BPA Call

Cascadia Day Use and Parking Lot Construction

Department of Agriculture, Forest Service | Published September 22, 2015  -  Deadline June 9, 2015
cpvs

Link To Document

55--Lumber for Troop Construction - Fort Dix, NJ

Department of the Army, Army Contracting Command | Published April 13, 2015  -  Deadline May 1, 2015
cpvs

The United States Army Support Activity, Fort Dix currently has a requirement for lumber. The contractor shall provide pressure treated plywood of different dimensions, five long round poles, plastic sheeting, stockade privacy fencing, common nails, and six 5 gallon spray bottles. The contractor shall deliver all lumber to the Range Control Headquarters, located at 9013 Range Road, Fort Dix, NJ 08640. This requirement will be set aside 100% for small businesses utilizing NAICS 321113 (Sawmills). The small business size standard for this NAICS is 500 employees. This synopsis is provided for informational purposes and is not considered a request for quote. The solicitation will be posted on or about 17 April 2015. The offer due date will be stated in the solicitation. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-60. It is the responsibility of the offeror to review the web page for notice of amendments, updates, or changes to the solicitation. Please be advised that hard copies of the solicitation will not be made available; you must download solicitation documents from the FBO. All potential sources must obtain a DUNS number, a CAGE code, and register in the System for Award Management (SAM) located at https://www.sam.gov/portal/public/SAM/ in order to transact business with the government. Failure to obtain a DUNS number, a CAGE code and register in the SAM may result in the delay of award of a contract or possible award to the next otherwise successful offeror. For further information, please contact Katie Lyons, Contract Specialist at Katie.j.lyons.civ@mail.mil.

Y--Whiskeytown Lake - Oak Bottom Temperature Curtain

Department of the Interior, Bureau of Reclamation | Published December 2, 2015
cpvs

IGF::CT::IGF The scope of work for the Oak-Bottom Temperature Curtain is to issue a construction contract for fabrication and installation of a new temperature curtain in the same location of the recently removed curtain. The Temperature Control Curtain is will be approximately 600 ft. wide by 40 ft. deep, and is located approximately 2 miles downstream of the tailrace of the Judge Francis Carr Powerplant in the Whiskeytown Reservoir.

Y--CASPER CONSTRUCT/PLUG WATER WELLS

Department of the Interior, Bureau of Land Management | Published May 11, 2016
cpvs

CASPER CONSTRUCT/PLUG WATER WELLS IGF::OT::IGF

Y--CASPER CONSTRUCT WATER WELL 2016

Department of the Interior, Bureau of Land Management | Published April 6, 2016  -  Deadline April 21, 2016
cpvs

CASPER CONSTRUCT/PLUG WATER WELLS

Z--Guernsey Dam North Spillway Gate Rehabilitation

Department of the Interior, Bureau of Reclamation | Published March 7, 2016  -  Deadline April 28, 2016
cpvs

The principal components of work include blasting and coating gate, rehabilitating the roller trains, furnishing and installing new roller trains, designing and constructing a water deflector to prevent further damage to roller trains; will include a requirement for design and installation of coffer dam to remove and control water during construction. Guernsey Dam is located approximately 2 miles northwest of Guernsey, Wyoming in Platte County Award will be made to the offeror submitting a proposal which conforms to the solicitation and is most advantageous to the Government considering the non-cost and cost factors being evaluated. The technical factors to be evaluated are as follows: (1) Technical Plan for Construction, (2) Company Experience, (3) Key Personnel, (4) Past Performance, and (5) Safety. The solicitation will be issued on or around March 21, 2015. The Price and Technical Proposals will be due approximately 30 calendar days from the date the solicitation has been issued. All responsible sources may submit a proposal which shall be considered by the Bureau of Reclamation. The estimated price range of this acquisition is $1,000,000 to $5,000,000. The North American Industrial Classification Code is 2383200. The procurement is issued under Full and Open Competition. Once issued, the solicitation including all specifications and drawings will be able to be viewed at https://www.fedconnect.net. From here, select Search for Public Opportunities Only, search by Reference Number, R16PS00456. They will also be posted at www.fbo.gov, under the sale solicitation number. Effective July 29, 2012, any contractor interested in doing business with the Federal Government must register in the System For Award Management (SAM) database prior to award of a contract. SAM is a Federal Government owned and operated free website that consolidates the Central Contractor Registration (CCR), Online Representations and Certifications Application (ORCA), and the Excluded Parties List System (EPLS). The vendor¿s Duns and Bradstreet number and banking information are required for registration. Contractors may obtain information on registration and annual confirmation requirements at the SAM website at www.SAM.GOV or by calling 1-866-606-8220. Payment requests for the anticipated contract must be submitted electronically through the U.S. Department of the Treasury¿s Internet Payment Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail ippgroup@bos.frb.org or phone (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Officer with its proposal or bid.

Land Restoration and Integrated Pest Management

Department of the Interior, Bureau of Reclamation | Published March 2, 2016
cpvs

The Bureau of Reclamation, Pacific Northwest Regional Office, has a requirement for land enhancement and integrated pest management for the Yakima River Basin Water Enhancement Project; solicitation R16PS00455. Required work includes mowing, chemical spraying, biological control, re-vegetation, assistance with construction and application of integrated pest management plans, assistance in the development and application of restoration plans, and coordination with local, state, and federal agencies for weed suppression and seeding. Contractor shall provide all supplies, equipment, labor, and supervision necessary for completion of the subject project, treatment area covers portions of Yakima and Kittitas Counties, Washington State. The North American Industry Classification System (NAICS) code associated with this project is 561730. The small business size standard is $7.5 million in gross annual receipts averaged over the previous three 1-year accounting periods. This procurement is being advertised as a total small business set-aside and will be conducted using FAR Parts 12 and 13 procedures. The award will include a base year and four option years. The technical factors will include, at minimum, past performance, experience, and price; these evaluation factors are subject to change. Final evaluation factors will be defined in the solicitation package. Quotes will be accepted from all responsive and responsible small business concerns. An electronic copy of the solicitation will be available APPROXIMATELY March 7, 2016 at www.fbo.gov. Prospective offerors must be registered in the System for Award Management (SAM) prior to receiving award of any contract, see www.sam.gov. Direct inquiries to Marisol Bastiani by e-mail at mbastiani@usbr.gov

Z--Grand Coulee Paving

Department of the Interior, Bureau of Reclamation | Published January 12, 2016  -  Deadline March 1, 2016
cpvs

The Bureau of Reclamation, Pacific Northwest Region, has a need for construction services for paving of several areas around Grand Coulee Dam in Washington State. Grand Coulee Dam is located approximately 80 miles west of Spokane, Washington in the counties of Grant and Okanogan, near the city of Coulee Dam. The principal components of work consist of: furnishing and placing new hot mix asphalt on a prepared foundation or base, chip seal, fog seal, crack seal, temporary flexible raised pavement markers, asphalt grinding, striping roads and parking lots in the industrial area and left powerhouse; existing base repair, accessible parking locations, new sidewalk, repair of existing boat ramp, and placement and compaction of chip fill grindings on a prepared foundation. The North American Industry Classification System (NAICS) code associated with this project is 237310. The small business size standard applicable to this project is $36.5 million in gross annual receipts averaged over the previous three 1-year accounting periods. The project will include a base portion of work for which the order of magnitude for is between $1,000,000.00 and $5,000,000.00. The project also involves several option items for which the orders of magnitude are as follows: option 1, between $1,000,000.00 and $5,000,000.00; option 2, between $1,000,000.00 and $5,000,000.00; option 3, between $100,000.00 and $250,000.00; option 4, between $250,000.00 and $500,000.00; option 5, between $250,000.00 and $500,000.00; option 6, between $500,000.00 and $1,000,000.00; option 7, between $250,000.00 and $500,000.00; and option 8, between $1,000,000.00 and $5,000,000.00. This procurement is a HUBZone small business set-aside. Proposals will be accepted from all responsive and responsible HUBZone small business concerns. Prospective contractors shall be registered in the System for Acquisition Management (SAM). For more information regarding registering in SAM, please visit https://www.sam.gov/portal/public/SAM/ . Contractors shall note that this procurement will be issued on or about January 28, 2016. When the solicitation is issued it will be available electronically at www.fbo.gov and www.fedconnect.net.

J--Annual heavy crane inspections and minor repairs at Grand Coulee Power Office (

Department of the Interior, Bureau of Reclamation | Published November 18, 2015  -  Deadline December 28, 2015
cpvs

The Bureau of Reclamation, Pacific Northwest Regional Office, has a requirement for annual heavy crane inspections and minor repairs at Grand Coulee Power Office (GCPO), Grand Coulee, WA. The applicable North American Industry Classification System (NAICS) is 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, and the small business size standard is $7.5 million in average annual receipts. The applicable service code is J038 Maintenance and Repair of Construction, Mining, Excavating and Highway Maintenance Equipment. The purpose of this requirement is to provide annual OSHA inspections, certification and repair of the cranes, hoists, and lifts that service the Right Powerhouse (RPH), Third Powerplant (TPP), Left Powerhouse (LPH), Pump Generator Plant (PGP) and Industrial Area (IA) for the Bureau of Reclamation, Grand Coulee Power Office, Grand Coulee, Washington. Inspections and certifications will verify that equipment is in compliance with existing Government regulations and policies. Contractor is required to conduct authorized repairs, and/or providing the proper remedies, which will eliminate any deficiencies and bring the equipment into compliance. The Contractor will ensure that all accepted repairs will return the equipment to a fully operational condition and enable the equipment to be certified for the span of no less than 3 years. Reclamation intends to award one fixed-price contract. The anticipated period of performance for the base year is 02/01/16 to 01/31/17, option year one 02/01/2017 to 01/31/18, and option year two 02/01/18 to 01/31/2019. These services will be purchased in accordance with FAR Part 12 and 13, simplified acquisition procedures apply. Any award will be based on the best value to the Government. This requirement is a total small business set aside. The Government will evaluate proposals based on evaluation factors listed in the solicitation. An electronic copy of the solicitation (R16PS00123) will be available APPROXIMATELY the fourth week of November. Prospective vendors must be registered in the System for Award Management (SAM) prior to awarding any contract resulting from this solicitation. Agency: Bureau of Reclamation, Pacific Northwest Regional Office, 1150 N. Curtis Road, Suite 100, Boise, ID 82706-1234; contact Sandra Snediker, ssnediker@usbr.gov, or 208-378-5200.

J--Annual Light Crane/Hoist/Lift Inspections and Minor Repairs

Department of the Interior, Bureau of Reclamation | Published December 14, 2015  -  Deadline January 20, 2016
cpvs

The Bureau of Reclamation, Pacific Northwest Regional Office, has a requirement for Annual Light Crane/Hoist/Lift Inspections and Minor Repairs at Grand Coulee Power Office (GCPO), Grand Coulee, WA. The applicable North American Industry Classification System (NAICS) is 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, and the small business size standard is $7.5 million in average annual receipts. The applicable service code is J038 Maintenance and Repair of Construction, Mining, Excavating and Highway Maintenance Equipment. The purpose of this requirement is to provide annual OSHA inspections, certification and repair of the smaller cranes, hoists, and lifts that service the Right Powerhouse (RPH), Third Powerplant (TPP), Left Powerhouse (LPH), Pump Generator Plant (PGP) and Industrial Area (IA) for the Bureau of Reclamation, Grand Coulee Power Office, Grand Coulee, Washington. Inspections and certifications will verify that equipment is in compliance with existing Government regulations and policies. Contractor is required to conduct authorized repairs, and/or providing the proper remedies, which will eliminate any deficiencies and bring the equipment into compliance. The Contractor will ensure that all accepted repairs will return the equipment to a fully operational condition and enable the equipment to be certified for the span of no less than 3 years. Reclamation intends to award one fixed-price contract. The anticipated period of performance for the base year is 03/1/16 to 02/28/17, option year one 03/1/2017 to 02/28/18, and option year two 03/1/18 to 02/28/2019. These services will be purchased in accordance with FAR Part 12 and 13, simplified acquisition procedures apply. Any award will be based on the best value to the Government. This requirement is a total small business set aside. The Government will evaluate proposals based on evaluation factors listed in the solicitation. An electronic copy of the solicitation (R16PS00234) will be available APPROXIMATELY the third week of December. Prospective vendors must be registered in the System for Award Management (SAM) prior to awarding any contract resulting from this solicitation. Agency: Bureau of Reclamation, Pacific Northwest Regional Office, 1150 N. Curtis Road, Suite 100, Boise, ID 82706-1234; contact Sandra Snediker, ssnediker@usbr.gov, or 208-378-5200.

Scroll Case Recoating, Fremont Canyon Powerplant

Department of the Interior, Bureau of Reclamation | Published April 10, 2017  -  Deadline May 26, 2017
cpvs

The work under this solicitation includes removal and disposal of existing lining system interior surfaces of scroll case through the butterfly valve for Unit 1 and 2; relining interior surfaces of scroll case through the butterfly valve for Units 1 and 2; repair of interior surfaces of scroll case through the butterfly valve for Units 1 and 2. Fremont Canyon Powerplant is located approximately 45 miles southwest of Casper, Wyoming in Natrona County. Award will be made to the offeror submitting a proposal which conforms to the solicitation and is most advantageous to the Government considering the non-cost and cost factors being evaluated. The technical factors to be evaluated are as follows: (1) Technical Plan for Construction, including Work Plan and Schedule and Procedure for coating removal, surface preparation and waste management; (2) Company Experience, (3) Key Personnel, (4) Past Performance, and (5) Safety. The solicitation will be issued on or around April 25, 2017. January 16, 2017. The organized site visit will be scheduled on or around May 16, 2017. The proposals will be due approximately 30 days from the date the solicitation is actually issued. All responsible contractors may submit a proposal which shall be considered by the Bureau of Reclamation. The estimated price range of this acquisition is $250,000 - $500,000. The North American Industrial Classification Code is 238320. The small business size standard is $15.0 Million. The procurement will be issued for full and open competition under a Federal Acquisition Regulations Part 15. Once issued, the solicitation (including specifications and drawings) will be posted at www.fbo.gov and www.fedconnect.net (from the fedconnect site, click on Public Opportunities Only, search by reference number, then enter R17PS00780. Effective July 29, 2012, any contractor interested in doing business with the Federal Government must register in the System For Award Management (SAM) database prior to award of a contract. SAM is a Federal Government owned and operated free website that consolidates the Central Contractor Registration (CCR), Online Representations and Certifications Application (ORCA), and the Excluded Parties List System (EPLS). The vendor's Duns and Bradstreet number and banking information are required for registration. Contractors may obtain information on registration and annual confirmation requirements at the SAM website at www.SAM.GOV or by calling 1-866-606-8220. Payment requests for the anticipated contract must be submitted electronically through the U.S. Department of the Treasury's Invoicing Processing Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail ippgroup@bos.frb.org or phone (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Officer with its proposal or bid.  

Kortes Station Service Equipment Replacement

Department of the Interior, Bureau of Reclamation | Published November 17, 2014  -  Deadline January 9, 2015
cpvs

The principal components of work include the following: Replace AC and DC electrical distribution equipment and cables, including the follfowing: removing all existing cables connected to 480/120-volt switchgear/switchboard D2A, 208/120-volt main lighting cabinet L2A, and 125-volt DC distribution board B3A; providing new 480-volt combination switchboard/switchgear D2A in new location; providing new combination transformer/load-centers D2B and D2C; providing new 208/120-volt main lighting distribution cabinet L2A in existing location; providing new 208/120-volt lighting panelboards L1A, L1B, L1C, L2B, L3A, LSA in existing locations; providing new conductors and raceway, including cable tray, between the new distribution equipment and loads; providing temporary power distribution. Modifying six motor-control/contactor-control circuits with the addition of control power transformers (CPTs) to eliminate existing separate-source control power, including the following: determining proper size of CPTs and CPT fuses for contactor/starter circuits; installing and connecting CPTs and fuses in existing enclosures where possible, and in separate contractor-provided enclosures where existing enclosures have insufficient space. Kortes Powerplant is located approximately 64 miles southwest of Casper, Wyoming in Carbon County. Award will be made to the offeror submitting a proposal which conforms to the solicitation and is most advantageous to the Government considering the non-cost and cost factors being evaluated. The technical factors to be evaluated are as follows: (1) Technical Plan for Construction, including Work Plan, Schedule and Manufacturing as subfactors, (2) Company Experience, (3) Key Personnel, (4) Past Performance, and (5) Safety, including Safety Management, Job Hazard Analysis, Workers' Compensation Experience Modification Rate, OSHA Total Incident Rate and Days Away, Restricted or Transfer Rate as subfactors. The solicitation will be issued on or around December 1, 2014. The Price and Technical Proposals will be due approximately 40 calendar days from the date the solicitation has been issued. All responsible sources may submit a proposal which shall be considered by the Bureau of Reclamation. The estimated price range of this acquisition is $1,000,000 to $5,000,000. The North American Industrial Classification Code is 238210. The procurement is issued under Full and Open Competition. Once issued, the solicitation including all specifications will be able to be viewed at https://www.fedconnect.net. From here, select Search for Public Opportunities Only, search by Reference Number, R15PS00030. The drawings will not be made available online. Interested contractors must submit their request for the drawings via e-mail to rmee@usbr.gov. Upon receipt of a request, the CD will be sent via regular mail. Effective July 29, 2012, any contractor interested in doing business with the Federal Government must register in the System For Award Management (SAM) database prior to award of a contract. SAM is a Federal Government owned and operated free website that consolidates the Central Contractor Registration (CCR), Online Representations and Certifications Application (ORCA), and the Excluded Parties List System (EPLS). The vendor's Duns and Bradstreet number and banking information are required for registration. Contractors may obtain information on registration and annual confirmation requirements at the SAM website at www.SAM.GOV or by calling 1-866-606-8220. Payment requests for the anticipated contract must be submitted electronically through the U.S. Department of the Treasury's Internet Payment Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail ippgroup@bos.frb.org or phone (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Officer with its proposal or bid.

C--Cutteral Lateral Water Treatment Plant -- Industry Day

Department of the Interior, Bureau of Reclamation | Published December 4, 2015  -  Deadline December 11, 2015
cpvs

Cutteral Lateral Water Treatment Plant -- Industry Day The purpose of this amendment is to clarify. Post Industry Day Answers are due on Friday, December 11, 2015 1700 MT. The Bureau of Reclamation (Reclamation), a water management agency within the Department of the Interior (Interior), announces an Industry Day for any entity or entities interested in designing and building a water treatment plant for the Cutter Lateral portion of the Navajo Gallup Water Supply Project (NGWSP) located in Northern New Mexico approximately 30 miles Southeast of Bloomfield. The Industry Day is scheduled for November 18-19, 2015, at the DOI University, US Department of the Interior, National Indian Programs Training Center located at 1011 Indian School Road NW, Suite 254, Albuquerque, New Mexico. The purpose of this Industry Day is to gather information from interested parties and is deemed essential as part of our collaborative, deliberate planning process for Reclamation in identifying and evaluating alternatives for designing and building the CLWTP. INDUSTRY DAY SCHEDULE Wednesday, November 18, 2015 8:00 a.m. ¿ 9:00 a.m. Registration 9:00 ¿ 11:30 a.m. Plenary Session 11:30 a.m. ¿ 12:30 p.m. Break 12:30 p.m. ¿ 2:30 p.m. Questions & Answers 2:30 p.m. ¿ 3:30 p.m. Wrap Up / Conclusion Thursday, November 19, 2015 8:30 a.m. ¿ 11:30 a.m. Individual Meetings* *To schedule an individual meeting, call Ms. Leslie Corpening at (801) 524-3738 or e-mail at lcorpening@usbr.gov. Each meeting will be 30 minutes in duration. DESCRIPTION The Omnibus Public Land Management Act of 2009, Title X Part III (Public Law 111-11) signed on March 30, 2009, provided the authorization to construct this important project as a major component of the Navajo Nation San Juan River Basin Water Rights Settlement in New Mexico. An RFI (R15PS01052) was announced on May 22, 2015 which requested the following information. 1. Questions for Design-Build Teams: a. Does your company have the capacity to permit, design, and build the CLWTP considering the information provided in this RFI and assuming there are no significant deviations from this information once more data is provided? b. Company point of contact, address, telephone number, and status of the company; (i.e., small business, HUBZone business, etc.) c. Provide your company¿s portfolio as it relates to: 1. Design-build in general. 2. Specific application to water treatment facilities. 3. Similar size/type of WTP needed for this project that you have designed and/or built. 4. Highlight any innovative treatment (design or construction) techniques you have used to reduce cost and/or maintenance time. d. Describe your company¿s experience in designing water treatment plants for natural organic matter reduction, including but not limited to biofiltration and other treatment processes. e. Describe company¿s experience with water treatment operation under a ¿design-build-operate¿ scenario. 2. Questions for Equipment Manufacturers, Representatives and Process Engineers: a. Suggested treatment processes with pertinent technical data sufficient to support manufacturer¿s representations, operational requirements, costs (initial installation and operational), warranties and proprietary information. b. Market standard sizes, lay-outs, plans and specifications, space and power requirements, typical and maximum/minimum feed rates, typical replacement or service time requirements, and typical life cycle costs per 1,000 gallons for a water treatment plant of this size/capacity. c. Company information, such as socio economic status, size, market share, annual sales, length of time in business, length of time with this specific product. d. List of projects using this treatment process. DESIGN DATA A. The CLWTP will serve the Eastern portion of the NGWSP and will consist of a water treatment plant (WTP) and pumping plant. The Cutter Lateral obtains water from Cutter Reservoir, an existing regulating reservoir on the Navajo Indian Irrigation Project. B. Hydraulic Data 1. WTP The WTP will be designed and built for the 2020 demand with the capability of being expanded for the 2040 demand (Table 1). The influent /effluent difference assumes an approximate 4% required maximum loss through the WTP. Table 1: Year 2020 and 2040 water demands Units Demand 2020 2040 Influent Effluent Influent Effluent MGD Maximum Day 4.0 3.8 5.6 5.4 Average Day 3.1 3.0 4.3 4.2 Minimum Month 2.5 2.4 3.5 3.3 2. Pumping Plant Pumping Plant shall be designed for sufficient head (420 feet) to pump water to proposed operating storage tank elevations at the following flow rates (Table 2): Table 2: Year 2020 and 2040 pumping plant flow rates Year Units (CFS) (GPM) 2020 5.9 2,700 2040 8.3 3,800 C. Water Quality Data 1. Raw Water Quality The source water is a reservoir with a good water quality. See the 4/6/2015 water sample highlighted water quality results (Table 3). Table 3: Highlighted water quality results (4/6/2015 sample) Analyte Value Units General Alkalinity (Total) 81 mg/L DOC 2.5 mg/L Hardness 101 mg/L as CaCO3 pH 8.1 TDS 160 mg/L TOC 2.6 mg/L TSS 4.5 mg/L Turbidity 4.5 NTU UV 0.079 cm-1 Ions Arsenic 0.001 mg/L Bromide

Stone, Gravel, Sand and Quarry Fill

Department of the Air Force, Air Mobility Command | Published December 18, 2014
cpvs

This is a synopsis and does not obligate the government to award; the government reserves the right to withdraw the synopsis and any forthcoming solicitation without due compensation to potential offerors. This announcement does not constitute a Request for Quote. The period of performance is from 15 Jan 15 through 14 Jan 20. The solicitation shall incorporate provisions and clauses that are in effect through the most current Federal Acquisition Circular. This action is being procured under NAICS code 212321 (Sand and gravel quarrying (i.e., construction grade) and/or beneficiating) and related Small Business Standard - 500 employees. The solicitation is expected as Request for Quote (RFQ) issued as a 100% Small Business Set-Aside. The government is contemplating award of a minimum of three Blanket Purchase Agreements to provide Stone, Gravel, Sand and Quarry Fill to Joint Base McGuire-Dix-Lakehurst (JB MDL), New Jersey. The contractor shall provide all personnel, supervision, transportation and all other resources to provide Stone, Gravel, Sand and Quarry Fill. This is a commercial acquisition. All prospective offerors must be registered in the System for Award Management (previously Central Contractor Registration) in order to do business with the government. The solicitation will be issued on or about 19 Dec 14. The due date for proposals will be posted in the solicitation. The solicitation will be issued electronically on the Federal Business Opportunities web page; (http://www.fedbizopps.gov/). Paper copies will not be made available. Once the solicitation is posted, it is incumbent upon interested contractors to monitor the Fed Biz Opps web page frequently for updates/amendments to the solicitation. Questions about this requirement should be emailed to sean.burney.1@us.af.mil.
  • 1