The Contractor must offer the object of the contract complies with the requirements set out in the Employer ZIS, the order specification attached as Annex A to the ZIS, technical documentation, detailed design, technical execution and acceptance of works (STWiOR) and przedmiarze.Confirmation of execution of guarantee in accordance with the manufacturer's requirements will review protocol signed by an authorized person and confirmed by the inspector on behalf of the Purchaser.
The Contractor must attach to the tender offer price calculation of lump sum for the whole contract calculated on the basis of individual calculation, and presented in the form of simplified cost estimates.
The scope of the contract and contract includes, in particular, the purchase or production, delivery including customs clearance, transport and insurance, installation, calibration and commissioning, as well as instruction in operating equipment and software as well as provision of maintenance and service.Position should meet the following parameters and characteristics:
Compliance with ISO 11443 and ISO 17744.
High temperature furnace
Pvt measurement module
Module for thermal conductivity measurements
Control and data collection (software)
Unroofed rheometer for testing rubber vulcanization kineticsPosition should meet the following parameters and characteristics:
Measuring head with force of +/- 10kN
Measuring head with force of +/- 500N
Digital control electronics
Compression test plates (2 pcs)
90 degree tear test bench according to ASTM B571, D2861, D6252
Video extensometer for non-contact measurement of elongation directly on the sample
Endurance test software, at least in Polish
Operator control panel with touch screen diagonal of at least 21 "Position should meet the following parameters and characteristics:
Shore A hardness tester
Shore D hardness tester
Shore A / D hardness tester with manual load setting and Shore A and D weight set
IRHD hardness meter.Position should meet the following parameters and characteristics:
An apparatus designed to measure the oxygen ratio of plastics at room temperature.
UL94 measuring adapter for vertical and horizontal testing.
Burner and gas controllers
Equipment for fixing samples and burner
Set for time measurement
Burner calibration kit
Differential Scanning Calorimeter DSC
Dilatometer to measure linear coefficient of thermal expansion of materials.
FTIR spectrometer with ATR accessories enabling research and development, confirmation of raw materials identity, product quality control.
Helium pycnometer for measuring the actual density of elastomers, rubber mixtures, vulcanisates, powders, thick pastes
A gas chromatograph co-operating with a mass detector
Squadron mass detector
Automatic Liquid Sampler and Head-Space Gas Samplers