Call +44 800 9755 164

Public tenders for construction in Shtip Macedonia

Find all Construction tenders in the world.
Finding business opportunities has never been easier.

Results for construction. Make a new search!

Street construction in municipality of Karbinci

Municipality of Karbinci | Published April 23, 2016  -  Deadline May 4, 2016
cpvs
45000000

Street construction in municipality of Karbinci:

The contractor will be obligated to perform the works at the following location: Vanco Prke Community — Village of Krupishte (1 street, total = 150 m), Village of Dolni Balvan (3 streets, total = 190 m), Village of Tarinci (11 streets, total = 1 175 m), Karbinci (6 streets, total = 903 m), Radanje (4 streets, total = 415 m), Kozjak (1 street, total = 137 m), Argulica (4 streets, total = 232 m), Crvulevo (1 street, total = 220 m), Prnalija (1 street, total = 655 m), Villa Community of Vrteshka (1 street, total = 730 m) and Nov Karaorman (1 street, total = 155 m).

Works supply- Construction of parts of the local road v.Shasharvalija- v.Koshevo from km. (0+000.00 to km. 3+000.00)

Municipality Shtip | Published October 8, 2016  -  Deadline October 18, 2016
cpvs
45233123

Works supply- Construction of parts of the local road v.Shasharvalija- v.Koshevo from km. (0+000.00 to km. 3+000.00).

Re-construction of a street in village Karbinci (KP NO.3142/1 and 3132), from km 0+000.00 to 0+914.10.

Municipality of Karbinci | Published September 5, 2015  -  Deadline September 21, 2015
cpvs
45000000

Re-construction of a street in village Karbinci (KP NO.3142/1 and 3132), from km 0+000.00 to 0+914.10.

Construction materials

PC „Stipion 2011” Shtip | Published September 14, 2016  -  Deadline September 14, 2016
cpvs
44110000

Detailed description of the subject of the public procurement contract is listed in the technical specification.

Construction material -by list of specification

JPISAR35 | Published September 27, 2016  -  Deadline October 12, 2016
cpvs
44160000, 44161000, 44100000

Given in tender documentation.

Street Construction in Municipality of Karbinci

Municipality of Karbinci | Published April 22, 2016  -  Deadline May 4, 2016
cpvs
45000000

The contractor will be obligated to perform the works at the following location: Vanco Prke Community — Village of Krupishte (1 street, L total = 150 m), Village of Dolni Balvan (3 streets, L total = 190 m), Village of Tarinci (11 streets, L total = 1 175 m), Karbinci (6 streets, L total = 903 m), Radanje (4 streets, L total = 415 m), Kozjak (1 street, L total = 137 m), Argulica (4 streets, L total = 232 m), Crvulevo (1 street, L total = 220 m), Prnalija (1 street, L total = 655 m), Villa Community of Vrteshka (1 street, L total = 730 m) and Nov Karaorman (1 street, L total = 155 m).

Link construction between street 'Goce Delchev' and street 'Partizanska' in Shtip

Municipality of Shtip | Published February 22, 2017  -  Deadline March 9, 2017
cpvs
45233120

More detailed description of the subject for the agreement for public procurement is given in the tender documentation attached to this announcement.

Investments in the local road infrastructure in the East Planning Region, in the municipalities of Vinica, Berovo, and Delchevo.

Centre for Development of the East Planning Region | Published March 4, 2016
Winner
SM Kompani DOO
cpvs
45233120

Reconstruction and rehabilitation of a local street in the village of Mitrashinci leading to St. Ilija Church — I phase

— Municipality of Berovo

Construction of a street in village Laki leading to St. Jovan Blagoslov Church, and the archaeological site Crkvishte, Mogila, and Gradishte, stationary 0,000 km — 0,450 km — municipality of Vinica Construction of a part of a local road, village Trstija — village Turija km 0 + 800,00 — 1 + 097,00 — Municipality of Delchevo.

Investments in the local road infrastructure in the East Planning Region, in the municipalities of Vinica, Berovo and Delchevo.

Centre for Development of the East Planning Region | Published March 2, 2016
Winner
SM Kompani DOO
cpvs
45233120

Reconstruction and rehabilitation of a local street in the village of Mitrashinci leading to St Ilija Church — I phase — Municipality of Berovo;

Construction of a street in village Laki leading to St Jovan Blagoslov Church, and the archaeological site Crkvishte, Mogila and Gradishte, stationary 0,000 km — 0,450 km — municipality of Vinica;

Construction of a part of a local road, village Trstija — village Turija km 0 + 800,00 — 1 + 097,00 — Municipality of Delchevo.

Investments in the local road infrastructure in the East Planning Region, in the municipalities of Vinica, Berovo, and Delchevo.

Centre for Development of the East Planning Region | Published October 10, 2015  -  Deadline October 28, 2015
cpvs
45233120

Reconstruction and rehabilitation of a local street in the village of Mitrashinci leading to St. Ilija Church — I phase — Municipality of Berovo. Construction of a street in village Laki leading to St Jovan Blagoslov Church, and the archaeological site Crkvishte, Mogila, and Gradishte, stationary 0,000 km — 0,450 km — municipality of Vinica. Construction of a part of a local road, village Trstija — village Turija km 0 + 800,00 — 1 + 097,00 — Municipality of Delchevo.

Bicycle track construction (riverside Bregalnica) in Shtip from stationed km 0+000,00 to km 4+712,90

Municipality Shtip | Published March 30, 2016  -  Deadline April 19, 2016
cpvs
45000000

More detailed description of the subject of the public procurement contract is provided in the tender documentation attached to this announcement.

Construction of a local road from a local road — Vrsakovo village — Sudik village to Dolno Trogerci village.

Centre for Development of the East Planning Region | Published November 25, 2015
Winner
Eskavatori — MK
cpvs
45000000

A detailed description of the subject of the public procurement contract is given in the technical specification of the tender documentation.

Construction of a local road from a local road — Vrsakovo village — Sudik village to Dolno Trogerci village.

Centre for Development of the East Planning Region | Published September 23, 2015  -  Deadline October 13, 2015
cpvs
45000000

A detailed description of the subject of the public procurement contract is given in the technical specification of the tender documentation.

Procurement of works — Construction of a local road M-b — village of Suvo Grlo from 0 + 0 km to 2 + 800 km.

Municipality of Shtip | Published December 3, 2015
Winner
Kole-Trans Inzenering DOO
cpvs
45233123

More detailed description of the subject of the public procurement contract is given in the tender documentation attached to this announcement.

Procurement of works — Construction of a local road M-b — village of Suvo Grlo from 0 + 000 km to 2 + 800 km .

Municipality of Shtip | Published September 29, 2015  -  Deadline October 19, 2015
cpvs
45233123

More detailed description of the subject of the public procurement contract is given in the tender documentation attached to this announcement.

Service of the machine for computer tomography GE LIGHT SPEED VCT with installation of an X-ray tube and enabling the machine to function

PHI Clinical Hospital Shtip | Published December 14, 2016
Winner
NET Elektroniks
cpvs
33000000

Service of the machine for computer tomography GE LIGHT SPEED VCT with installation of an X-ray tube and enabling the machine to function

Technical specification Ordinal number Description Unit measure Quantity 1 X-ray tube with enclosed parts -Original new (unrepaired) x-ray tube type Maxiray or Performix for computed tomography General Electric Light Speed VCT 64 from 2011 or equivalent, which supports minimum 800mA of power by helical and axial scans without interruptions for cooling the samem -maximum positive pole heath capacity of 5.7±0.1MJ -nominal positive pole input power of 100±1kW -ultimate heat dissipation of min.36kW/min -target angle of 7º± 0.5º -rotor arm with speed of 8400±5 % rotations per minute -the insertion of the tube has two focuses: small 0.9 x 0.7 and big 1.2 x 1.1 (according to the standard IE60336/2005) with tolerance ±2 % or equivalent -measure value of power with small or big focus with tolerance of 2±% with the following voltage: 80kV: 300mA & 675mA, 100kV: 310mA & 770mA, 120kV: 335Ma & 800mA, 140kV: 335mA & 715mA -maximum heat capacity of the whole x-ray tube of 8±0.1MJ -maximum continuous heat dissipation of 8.6±0.1Kw -effective cooling system through external system of cooling which eliminates the interruptions at the time of encumbered helical scans -the whole construction of the x-ray tube can provide stability of the above mentioned dimensions of the small and big focus of ±2 % for a high resolution picture of 1024x1024 with tolerance of ±1 %, at rotations of 0.35 seconds — the mono-block case is equipped with temperature protection (93-94ºC) for safety work on the tube -the technology of the grounded anode with maximum power of anode to cathode of 140±1Kv -maximum allowed current of power at 140 kV < 60mA — filtration of case of 3.25±0.05mm equivalent of aluminium at 70±1kVp -sight field of 40±1mm2 -to support the following single helical protocols of scanning at 120 kV, time of scanning and maximum power according to the tolerance of ±2 %: 5sec &800 mA, 10sec & 790 mA, 20 sec &645 mA, 30 sec & 560 mA, 40sec & 510 mA, 50 sec & 485 mA, 60sec & 460Ma, 80sec & 290-430mA, 100 sec & 280-400 mA, 120sec & 270-280 mA -possibility for continuous scanning of minimum 5 sec at maximum power, without interruption for cooling of the same -the x-ray tube should have identification module through which the computed tomography could recognize the type of tube and determine and guarantee the dose of the x-ray radiation to the patient -cooling pump of the x-ray tube with transformational oil and built-in diode identification of its functional condition compatible with the real system of cooling of the computed tomography -plate for asic linearization -high voltage interface module for interconnection of x-ray tube with generator of high voltage of the computed tomography piece 1 2 Console parts -memory module of 500±5 % with built-in case in 6Gbps memory line for recording data directly of the computed tomography with appropriately built-in software for automatic recognition of the same, work power of 5 to 12 volts with tolerance of ±5 % and is controlled by chip with clock generator with maximum speed of 1333MHz -two paired minimum 19 inch monitors with resolution of minimum 1MP for medical-radiological use with relation 5:4, lightning of minimum 300cd/m2, contrast of min. 2000:1, with minimum two entries: DVI-D and D-Sub mini.

Service of the machine for computer tomography GE Light Speed VCT with installation of an X-ray tube and enabling the machine to function

PHI Clinical Hospital Shtip | Published August 27, 2016  -  Deadline October 7, 2016
cpvs

Technical specification:

Ordinal number Description Unit measure Quantity:

1 X-ray tube with enclosed parts.

— Original new (unrepaired) x-ray tube type Maxiray or Performix for computed tomography General Electric Light Speed VCT 64 from 2011 or equivalent, which supports minimum 800 mA of power by helical and axial scans without interruptions for cooling the samem;

— maximum positive pole heath capacity of 5.7 ± 0.1 MJ;

— nominal positive pole input power of 100 ± 1 kW;

— ultimate heat dissipation of min. 36 kW/min;

— target angle of 7º ± 0.5º;

— rotor arm with speed of 8 400 ± 5 % rotations per minute;

— the insertion of the tube has two focuses: small 0,9 x 0,7 and big 1,2 x 1,1 (according to the standard IE60336/2005) with tolerance ± 2 % or equivalent;

— measure value of power with small or big focus with tolerance of 2±% with the following voltage: 80 kV: 300 mA & 675 mA, 100 kV: 310 mA & 770 mA, 120 kV: 335 Ma & 800 mA, 140 kV: 335 mA & 715 mA;

— maximum heat capacity of the whole x-ray tube of 8 ± 0.1 MJ;

— maximum continuous heat dissipation of 8.6 ± 0.1 Kw;

— effective cooling system through external system of cooling which eliminates the interruptions at the time of encumbered helical scans;

— the whole construction of the x-ray tube can provide stability of the above mentioned dimensions of the small and big focus of ±2 % for a high resolution picture of 1 024 x 1 024 with tolerance of ±1 %, at rotations of 0,35 seconds;

— the mono-block case is equipped with temperature protection (93-94ºC) for safety work on the tube;

— the technology of the grounded anode with maximum power of anode to cathode of 140 ±1 Kv;

— maximum allowed current of power at 140 kV < 60 mA;

— filtration of case of 3.25 ± 0,05 mm equivalent of aluminium at 70 ± 1 kVp;

— sight field of 40 ± 1 mm²;

— to support the following single helical protocols of scanning at 120 kV, time of scanning and maximum power according to the tolerance of ±2 %: 5 sec. and 800 mA, 10 sec. and 790 mA, 20 sec. and 645 mA, 30 sec. and 560 mA, 40 sec. and 510 mA, 50 sec. and 485 mA, 60 sec. and 46 0Ma, 80 sec. and 290-430 mA, 100 sec. and 280-400 mA, 120 sec. and 270-280 mA;

— possibility for continuous scanning of minimum 5 sec. at maximum power, without interruption for cooling of the same;

— the x-ray tube should have identification module through which the computed tomography could recognize the type of tube and determine and guarantee the dose of the x-ray radiation to the patient;

— cooling pump of the x-ray tube with transformational oil and built-in diode identification of its functional condition compatible with the real system of cooling of the computed tomography;

— plate for asic linearization;

— high voltage interface module for interconnection of x-ray tube with generator of high voltage of the computed tomography piece 1;

2 Console parts:

— memory module of 500 ± 5 % with built-in case in 6 Gbps memory line for recording data directly of the computed tomography with appropriately built-in software for automatic recognition of the same, work power of 5 to 12 volts with tolerance of ±5 % and is controlled by chip with clock generator with maximum speed of 1 333 MHz;

— 2 paired minimum 19 inch monitors with resolution of minimum 1 mp for medical-radiological use with relation 5:4, lightning of minimum 300 cd/m², contrast of min. 2000:1, with minimum 2 entries: DVI-D and D-Sub mini 15 pin and possibility for real adjustment of the same of 40 to 50 cm with tolerance of ±5 % calculated from the top side of the monitors.

— module for recording of CD and DVD media with dimension of 120 mm±1 % and capacity of 700 MB and 4,7 GB accordingly and dimensions of 145 x 175 x 40 mm ±1 % compatible for built-in external case for extents of the console of the computed tomography. set 1.

3 Manual labor for installation of the spare parts from items 1 and 2:

— maximum manual labor for realization of items 1 and 2, with all the needed adjustments and calibrations for putting the computed tomography into function hour 30.

Total:

Guarantee min. 12 months of the replaced parts, except physical damage.

  • 1