Information - Pool construction and related engineering and medical technology equipment installation related to the SIOP-2.2.4-09 / 1-2010-0016 identification number project
Markusovszky Egyetemi Oktatókórház | Published October 7, 2015
Fertődi Építő és Szolgáltató Zrt.
45000000, 45212212, 43324100, 45310000, 45332200, 45350000, 33100000
Swimming pool construction and related engineering and medical technology equipment installation related to the SIOP-2.2.4-09 / 1-2010-0016 identification number of "supporting infrastructure development in the Structure Variation Markusovszky Hospital" project on the following key parameters detailed documentation in accordance with the plan: Introduction at No. 5, the hospital, the new EU under construction. It plans to build the building basement spa pool. All products and inventory should be taken when installing the application on the basis of technical specifications and qualification requirements and the design documentation in particular. The size and structural data may exclusively and only the structural design documentation. A description of the customer's destination, the new EU. It plans to build a building basement spa pool where part of the hospital for patients as weight bath, water gymnastics and other treatments can be provided. The land and the parameters for the planned structure by As these are not changed, they will not be repeated herein. The structural, HVAC, electrical, lightning protection against noise and vibration control solutions, the way the energy requirements of Supporting structure, building engineering, building electricity, lightning protection: structural, HVAC, building electrical solutions include industry-specific construction plan documentation. Protection against noise and vibration: a) airborne sound insulation against airborne sound insulation solutions against the new EU. When you enable the building have been identified, these spa pool construction design does not change this. establishing protection b) Impact sound insulation against sound is not required. The accessibility of transport routes in the accessibility plan prepared by the general contractor. Description Specifications Typical data pools full regional data for the pool area includes a chapter spaces statements. Further details of the buildings function: medical building, hospital admissions Basin basement floor line: + -0.00 m basement floor line designed pool area: + -0.78 m floor line designed walkways around the pool. M +0.83, +1.28 m, + 1,95 m pool designed floor line: +0.15 m, + 0.65 Building Physics is generally part of the computing power in the building permit design documentation, it will not be repeated here. Layers statements limiter devices in the spa pool construction plan documentation with projected layer orders of pool. The Foundation works substructure designed spa pool the EU. building existing base plate is placed in the upper plane of new primitives are not made. On-site work and builder of prefabricated structures, monolithic reinforced concrete elements. wall structures and monolithic. export outlets are constructed according to a static plan. Masonry bricklayers and other structures) and other load-bearing walls of masonry structures and incorporate into the planned ramp pedestals and support of road users around the pool to 20 mm thick. louvre stone masonry designed. b) In other cases, the interior partitions partitions mounted structures, according to the original construction plan. c) chimneys and vents in the pool area dehumidification, fresh air supply and exhaust air terminals, systems engineering takes place, which includes the engineering construction plan. Plastering, rabicolás All élképzésnél necessary vakolóprofil or élképzőprofil use. Thermal Insulation Finishing structures a) in the case of the outer wall of the pool area designed facade insulation does not change, we must be prepared according to the original licensee and construction plan. b) placement of floor space the floor of the pool is not designed for thermal insulation. Insulation against rainwater pool area designed for rainwater insulation is not involved, does not change, we must be prepared according to the original licensee and implementation plans. Insulation against ground water in the pool area designed for insulation against water in the ground is not involved, does not change, we must be prepared according to the original licensee and construction plan. Use insulation against water spreadable insulation on the side walls of the pool must be kept under the full height of the proposed wall. Wall and floor coverings, non-slip flooring in space engineering resin coating. Forklifts structures. windows and doors in the inner walls of windows and doors megépítéeni other cases must be based on the original plan. Lakatos, plastic and aluminum structures a) plastic and aluminum structures of plastic and aluminum structures must be made according to the original construction plan. b) Ancillary mechanical structures of the finished item is then only screwed