Public tenders for elevator in Iraq

Find all Construction tenders in the world.
Finding business opportunities has never been easier.

Results for construction. Make a new search!

RFQ-120/17 – Supply, Installation and Commissioning 1,600 kg elevator at the Al-Khansa Teaching Hospital

Country Office - IRAQ | Published April 18, 2017  -  Deadline April 25, 2017
cpvs

Dear Sir / Madam:We kindly request you to submit your quotation for the supply, installation, commissioning of a lift capacity (1600 kg) elevator at the Al-Khansa Teaching Hospital), as detailed in Annex 1 of this RFQ. When preparing your quotation, please be guided by the form attached hereto as Annex 3. Quotations may be submitted on or before 14:00 hours, April 25, 2017 Iraq time andvia email at the following address: United Nations Development ProgrammeRFQ-120/17 – Supply, Installation and Commissioning 1,600 kg elevator at the Al-Khansa Teaching HospitalEmail: bids.iraq.sc@undp.orgQuotations submitted by email must be limited to a maximum of 7.5 MB, virus-free. They must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation will reach the address above on or before the deadline. Quotations that are received by UNDP after the deadline indicated above, for whatever reason, shall not be considered for evaluation. The bidders are required to conduct the physical site visit to ensure understanding of the requirements prior to providing their offer to UNDP. The site visit is scheduled on Thursday, 20 April 2017 between 11:00 hrs to 13:00 hrs, the Focal Person is Engineer Aree Omar, mobile: 07504494800.

RFQ-099/17- supply, installation, commissioning of a lift capacity (1600 kg) elevator at the Al-Khansa Teaching Hospital

Country Office - IRAQ | Published March 30, 2017  -  Deadline April 6, 2017
cpvs

Dear Bidders,We kindly request you to submit your quotation for the supply, installation, commissioning of a lift capacity (1600 kg) elevator at the Al-Khansa Teaching Hospital), as detailed in Annex 1 of this RFQ. When preparing your quotation, please be guided by the form attached hereto as Annex 3. Quotations may be submitted on or before 14:00 hours, April 6, 2017 Iraq time and via email at the following address: United Nations Development ProgrammeRFQ-099/17 – Supply, Installation and Commissioning 1,600 kg elevator at the Al-Khansa Teaching HospitalEmail: bids.iraq.sc@undp.orgQuotations submitted by email must be limited to a maximum of 7.5 MB, virus-free. They must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation will reach the address above on or before the deadline. Quotations that are received by UNDP after the deadline indicated above, for whatever reason, shall not be considered for evaluation. The bidders are required to conduct the physical site visit in order to ensure understanding of the requirements prior to providing their offer to UNDP. The site visit is scheduled on Monday, 3 April 2017, between 11:00 hrs to 13:00 hrs, the Focal Person is Engineer Aree Omar, mobile: 07504496800.

RFQ-368/18 Rehabilitation of Elevators for Medicine Faculty,Ninawa University, East Mosul

UNDP-Erbil - IRAQ | Published May 27, 2018  -  Deadline June 19, 2018
cpvs

Dear Sir / Madam: We kindly request you to submit your quotation regarding Rehabilitation of Elevators for Medicine Faculty & Deanship building of the Faculty of Medicine, Ninawa University, East Mosul, as detailed in Annex 1 of this RFQ. Documents uploaded in the system as part of your quotation must be free from any form of virus or corrupted contents, or the quotations shall be rejected. It shall remain your responsibility to ensure that your quotation is submitted on or before the deadline indicated by UNDP in the e-Tendering system. Bids must be submitted in the online e-Tendering system in the following link: https://etendering.partneragencies.org using your username and password. “Bidders who will be registered on the e-tendering will be able to download the complete bidding documents from the e-tendering website as per above link. “Bidders can download the complete tender documentation from the e-Tendering upon registration”. In case your company is not registered in the E-Tendering Module, please use the following temporary username and password to register your company/firm:Username: event.guestPassword: why2changeE_Tendering Link: https://etendering.partneragencies.org The Procurement notice includes the details of the UNDP focal person and the email provided is a Yahoo account as per following details:Site Visit “Details:Please note that Site visit is mandatory for this RFQ, not attending site visit will lead to the rejection of your bid.Date & Time: 30 May 2018 between 10:00 a.m. till 12:00 p.m.Focal Person: Eng. Mohsin Yaseen, e-mail: mohsinyk@yahoo.comMobile: +964-750 482 1266 Name of focal point for clarifications: Name: Delan Abdula Email Address: delan.abdula@undp.org ” This Addendum is issued with the purpose to amend RFQ 368/18 dated 24 May 2018 as follow:1. Deadline date for the above RFQ has been extended from 10 June to 19 June 2018.2. New Items added to the original BOQ items are as below table for both elevators; -

ITB No. 136/16 – “Rehabilitation of ground water tank and elevated tank at Al Melaab - Iraq

United Nations Development Programme | Published September 4, 2016
cpvs

Dear Sir/Madam

The United Nations Development Programme (UNDP) hereby invites you to submit a Bid to this Invitation to Bid (ITB) for the above-referenced subject.  

This ITB includes the following documents:
    Section 1  – This Letter of Invitation
Section 2  – Instructions to Bidders (including Bid Data Sheet)
Section 3a –Schedule of Requirements and Technical Specifications
Section 3b –Related Services
Section 4  – Bid Submission Form
Section 5  – Documents Establishing the Eligibility & Qualifications of the Bidder;
Section 6  – Technical Bid Form 
Section 7  –  Price Schedule Form including Bill of Quantities (BOQs);
Section 8 –   Compliance Technical data sheets (Specifications);
Section 9  –  Form for bid Security
Section 10 – Form for Performance Security
Section 11 – General Terms and Conditions for Civil Work

Your offer, comprising of a Technical Bid and Price Schedule, together in a sealed envelope, should be submitted in accordance with Section-2 latest by 19th September 2016 by 1400 hours.

The bidders are required to conduct the physical site visit for complete understanding of Scope of Work prior sending the formal bid to UNDP. The site visit will be conducted on 8th September 2016 between 11:00 till 13:00. Focal Person: Eng. Adeeb Numan Abdulaziz Mobile: 0790 142 53 62
 
Should you require any clarification, kindly communicate with the contact person identified in the attached Data Sheet as the focal point for queries on this ITB.  

UNDP looks forward to receiving your Bid and thanks you in advance for your interest in UNDP procurement opportunities.                                                                              

                                                                                                                                               

ITB-153/18-Rehabilitation of Water Directorate Building, West Mosul, Ninawa Governorate, Iraq

Country Office - IRAQ | Published March 11, 2018  -  Deadline April 17, 2018
cpvs

Subject: ITB-153/18-Rehabilitation of Water Directorate Building, West Mosul, Ninawa Governorate “Addendum No. 1” Dear Bidders, The purpose of this addendum is to amend the following Clause of the ITB for subject mentioned project as following: Section 6 – Technical Bid Form – Mechnical Technical Complaince Sheet: Equipment Name: Elevator 650 kg capacityEquipment Serial No.: Mechanical works Item (3) Sub-item Name and No.: Car size, line # 13Original Specifications: 1500 mm x2000 mm (Width X Depth)Revised Specifications: According to EN-81. Sub-item Name and No.: Car size, line # 33Original Specifications: Unit mounts easily in virtually any position on top of the elevator.Self-contained, packaged design for easy installation. Compact rotary compressor saves space and weight. Rated at 18,000 BTUH nominal capacities. Mechanical heat/cool thermostat mounted in supply air duct for secure settings and more accurate temperature sensing. 15' umbilical for remote thermostat mounting. Optional automatic change-over heat/cool thermostat also available. Standard electric heater delivers 12,000 BTUH heat capacity. Fan runs continuously for improved air circulation and filtration. 300-cubic-feet-per-minute airflow rate. Hermetically sealed at factory for leak proof refrigerant flow. Black finish on supply air diverter conceals it in the gap between the false ceiling and interior wall. Compressor and outer cabinet are mounted on shock-absorbing rubber for added durability. Long-lasting copper tubing is fabricated with shock-loops to strengthen the system's vibration resistance. Supply and return grilles Gas-flux brazed joints on the tubing to resist corrosion. Start kit with start capacitor and relay makes starting easier on the compressor. All galvanized steel construction of the outer cabinet ensures corrosion resistance. Heavy-duty, galvanized steel drain pan is specially designed for corrosion-free durability with bronze-brazed corners and powder-coated epoxy paint.Freeze protection is provided to prevent evaporator freeze-up. 4-pin connector plugs into air conditioner for easy thermostat hookup. Field wiring accomplished simply and easily to lugs on Printed Circuit Board.Off -the-shelf, 12\" x 16\" filter drops into return air bonnet. 240 Volt, 50 or 60 Cycle, 1 Phase Unit available. Automatic Transformers, 240 Volt, 50 or 60 Cycle, 1 Phase, to 115 Volt, 60 Cycle, 1 Phase. Revised Specifications: Unit mounts easily in virtually any position on top of the elevator.Self-contained, packaged design for easy installation. Compact rotary compressor saves space and weight. Rated at 12,000 BTUH nominal capacities. Mechanical heat/cool thermostat mounted in supply air duct for secure settings and more accurate temperature sensing. 15' umbilical for remote thermostat mounting. Optional automatic change-over heat/cool thermostat also available. Fan runs continuously for improved air circulation and filtration. 300-cubic-feet-per-minute airflow rate. Hermetically sealed at factory for leak proof refrigerant flow. Black finish on supply air diverter conceals it in the gap between the false ceiling and interior wall. Compressor and outer cabinet are mounted on shock-absorbing rubber for added durability. Long-lasting copper tubing is fabricated with shock-loops to strengthen the system's vibration resistance. Supply and return grilles Gas-flux brazed joints on the tubing to resist corrosion. Start kit with start capacitor and relay makes starting easier on the compressor. All galvanized steel construction of the outer cabinet ensures corrosion resistance. Heavy-duty, galvanized steel drain pan is specially designed for corrosion-free durability with bronze-brazed corners and powder-coated epoxy paint. Freeze protection is provided to prevent evaporator freeze-up. 4-pin connector plugs into air conditioner for easy thermostat hookup. Field wiring accomplished simply and easily to lugs on Printed Circuit Board. Off -the-shelf, 12\" x 16\" filter drops into return air bonnet. 240 Volt, 50 or 60 Cycle, 1 Phase Unit available. Automatic Transformers, 240 Volt, 50 or 60 Cycle, 1 Phase, to 115 Volt, 60 Cycle, 1 Phase. The changes shall apply to the Item No. 3 of Mechanical Section of BOQ. Section 2 – Data Sheet – Deadline of Bid Submission (C.21.1 and D.24): As specified in the system (note that time zone indicated in the eTendering system is New York Time zone). All other clauses and conditions shall remain unchanged.Please be guided accordingly.Thank you. Anas Fayyad QarmanOperations ManagerUNDP Subject: ITB No. 153/18 - Rehabilitation of Water Directorate Building, West Mosul, Ninawa Governorate The United Nations Development Programme (UNDP) hereby invites you to submit a Bid to this Invitation to Bid (ITB) for the above-referenced subject. This ITB includes the following documents: Section 1 – This Letter of InvitationSection 2 – Instructions to Bidders (including Data Sheet)Section 3 – Schedule of Requirements and Technical SpecificationsSection 4 – Bid Submission FormSection 5 – Documents Establishing the Eligibility and Qualifications of the BidderSection 6 – Technical Bid FormSection 7 – Price Schedule Form (BOQ - Attached separately)Section 8 – Form for BidSection 8a- Template for Bid Security ConfirmationSection 9 – Form for Performance Security Section 10 – Form for Advanced Payment – Not ApplicableSection 11 – Contract to be Signed, including General Terms and Conditions for works Appendix A – Instructions manual for use of the eTendering system by suppliers.Appendix B – Registration process presentation. Your offer, comprising of a Technical Bid and Price Schedule, should be submitted in accordance with Section 2, through eTendering online system and by the deadline indicated in the event posted on https://etendering.partneragencies.org In case your company is not registered in the E-Tendering Module, please use the following temporary username and password to register your company/firm: Username: event.guestPassword: why2change You are kindly requested to indicate whether your company intends to submit a Proposal by clicking on “Accept Invitation” button no later than 15 March 2018. If that is not the case, UNDP would appreciate your indicating the reason, for our records If you have received this ITB through a direct invitation by UNDP, transferring this invitation to another firm requires notifying UNDP accordingly. The bidders are encouraged to conduct the physical site visit for complete understanding of Scope of Work. The site visit will be organized on 18 March 2018, 10:00 till 14:00.Focal point: Eng. Abdul Khaliq Idrees; Email: abdulhalikaz@gmail.com;Tel: 00964 (0) 07504347649 Should you require any clarification, kindly communicate with the contact person identified in the attached Data Sheet as the focal point for queries on this ITB. UNDP looks forward to receiving your Bid and thanks you in advance for your interest in UNDP procurement opportunities. Yours sincerely, Anas Fayyad QarmanOperations Manager UNDP, Iraq
  • 1