Public tenders for elevator in Ireland

Find all Construction tenders in the world.
Finding business opportunities has never been easier.

Results for construction. Make a new search!

Installation of Platform Lift at Virginia College, Co Cavan

Cavan and Monaghan Education & Training Board | Published March 8, 2017  -  Deadline March 29, 2017
cpvs
51100000, 50750000, 45214200, 42416100, 42416130, 45313000

The removal of the existing elevator lift and installation of new platform lift within the existing lift shaft and associated internal alterations and builders works at Virginia College, Lake Road, Virginia, Co. Cavan

Type of Contract:
Works

Food, beverages, tobacco and related products

Juice Hunt Ltd | Published July 19, 2013  -  Deadline August 26, 2013
cpvs
15000000, 15900000, 15940000, 15941000, 15950000

Bin Tipper Apple Washer Sorting Conveyor Washer Elevator Mill Chopper Press Collection Tank Pump from press 6000 lt pump Storage tanks 3x 10,000 lt, 3x 20,000 lt, 3 x 5,000 lt tanks

Supply and Delivery of Elevated Troughing and Lids

Iarnrod Eireann-Irish Rail | Published March 20, 2017  -  Deadline March 27, 2017
cpvs

Iarnród Éireann Irish Rail (IÉ) Has a requirement for ; 1000 linear metres of fibre glass elevated troughing 150mm by 150mm by 6000mm long. The troughing is to be supported by a top plate section which will be fixed to galvanised steel posts which are 3.5m long. When at tender stage the Quote to include all fixings /nuts / bolts /trough / top plate /bars for the erecting of same. This troughing will be used on railway embankments. To qualify for this you must download the attached Pre- Qualification Questionnaire, complete and return it along with all relevant information to bobby.ohara@irishrail.ie

Type of Contract:
Supplies

restore and refurbish windows on public facades and replace windows on rear elevations

St. Vincent's de Paul Infant School | Published July 29, 2015  -  Deadline August 14, 2015
cpvs
44100000, 44110000, 44000000, 45000000, 45400000, 45440000, 45441000, 45442000, 45442180, 45442190, 45442300

refurbish and restore existing sash windows together with replacement of windows on rear facades at St Vincent de Paul Infant school Griffith Ave Dublin 9. the works will involve the restoration and refurbishment of all windows and doors visible on the public sides of the building i.e. all of elevations A & B and part of elevations H & K on the attached drawings. The restoration works are to remove existing sash and opening sections, clean down and strip back paint, repair all damaged or decayed parts and re-putty as necessary. the works also include repairing or replacing any mechanisms connected with the widows i.e. hinges, wheels, cords etc. the windows should be primed, undercoated and finished with a gloss coat weather protection as per the specification / work schedule.

Provision of two new elevators to the school and provision of three, internal, wheelchair user inclined platform lifts

St. Louis High School | Published March 10, 2017  -  Deadline March 31, 2017
cpvs
45000000

The provision of three inclined platform lifts, and two new elevators are required. It is proposed to locate the elevators to the front and the rear of the school. These are different wings of the building; each are three-storeys. The proposed elevators are external. This will cause minimal disruption to the structure and to the existing accommodation in the school; no decant requirements are envisaged. Three inclined platform lifts are to be fitted to three differing flights of steps (flights vary from 3-10 steps). There will be an amount of structural enabling works required to fit the platform lifts; two adjacent walls where the lifts are to be fitted against are not masonry and will require strengthening.

Type of Contract:
Works

SINGLE STOREY 2 NO. MAINSTREAM CLASSROOMS WITH EN-SUITE TOILET FACILITIES, TOILET FOR ASSISTED USERS, RESOURCE ROOM, LINK CORRIDOR, EXTENSION TO GENERAL PURPOSE ROOM, MODIFICATIONS TO ELEVATIONS

Kilbride National School | Published February 2, 2015  -  Deadline February 23, 2015
cpvs
45000000, 45210000

SINGLE STOREY 2 NO. MAINSTREAM CLASSROOMS WITH EN-SUITE TOILET FACILITIES, TOILET FOR ASSISTED USERS, RESOURCE ROOM, LINK CORRIDOR, EXTENSION TO GENERAL PURPOSE ROOM, MODIFICATIONS TO ELEVATIONS, LOCATED ON THE NOTH-EAST SIDE OF THE EXISTING SCHOOL TOGETHER WITH CONNECTION TO EXISTING SEVICES ON SITE AND ALL ASSOCIATED SITE WORKS

Bottling & Capping Line for Liquid Food Facility (1)

Spice O’Life Ltd. | Published August 26, 2013  -  Deadline September 9, 2013
cpvs
15000000

Supply of 2 Filling & Capping Line-for filling of a range of liquids. , The supply and installation of the filling equipment. Specification: Complete filling and capping line Volumetric filler Twin head volumetric wheel in wheel out filler with simple plug into line Filling range 50ml to 1 litre Low mount hopper below 1.25 metre to top of lip and refillable during use. Fully stainless steel construction for hose-down environment Strip down and rebuild within 15 minutes between products Suitable for strip and rebuild multiple times per day Filling accuracy within 0.5% Suitable for all viscosities and fill temperatures from chilled 2 degrees to hot fill 95 degrees Speed 1500per hour up to 1 litre fill. Must accept fill signal from host line and give end of fill signal in return Host filling conveyor 3 metre long conveyor Worm screw indexing to suit irregular bottle shapes Able to index 2 or 3 pitches at a time Able to accept either twin or twin and single lane fillers either liquid or other. Including 4 change-part worm screws for 4 different bottles Change-part worm-screws must be simple click in attachment Capper Stand- alone single head capper Automatic cap sorter and cap chute Complete with bottle change-parts to suit 4 different bottles Complete with change-parts to suit 2 different caps Cap elevator as optional price Complete with integral approximately 1.5 metre conveyor with drive and in-feed end side swipe transfer guiding Speed minimum 1500 per hour

Bottling & Capping Line for Liquid Food Facility

Spice O’Life Ltd. | Published August 7, 2013  -  Deadline September 21, 2013
cpvs
15000000

Supply of 2 Filling & Capping Line-for filling of a range of liquids. , The supply and installation of the filling equipment. Specification: Complete filling and capping line Volumetric filler Twin head volumetric wheel in wheel out filler with simple plug into line Filling range 50ml to 1 litre Low mount hopper below 1.25 metre to top of lip and refillable during use. Fully stainless steel construction for hose-down environment Strip down and rebuild within 15 minutes between products Suitable for strip and rebuild multiple times per day Filling accuracy within 0.5% Suitable for all viscosities and fill temperatures from chilled 2 degrees to hot fill 95 degrees Speed 1500per hour up to 1 litre fill. Must accept fill signal from host line and give end of fill signal in return Host filling conveyor 3 metre long conveyor Worm screw indexing to suit irregular bottle shapes Able to index 2 or 3 pitches at a time Able to accept either twin or twin and single lane fillers either liquid or other. Including 4 change-part worm screws for 4 different bottles Change-part worm-screws must be simple click in attachment Capper Stand- alone single head capper Automatic cap sorter and cap chute Complete with bottle change-parts to suit 4 different bottles Complete with change-parts to suit 2 different caps Cap elevator as optional price Complete with integral approximately 1.5 metre conveyor with drive and in-feed end side swipe transfer guiding Speed minimum 1500 per hour
  • 1