University of Stuttgart, Inst F. Plastics Technology ICT, Type of service:. Steel and metal construction scope of services: exterior door panel, double-leaf, 1 piece
A 5 FDE AS Schwetzingen - AK Walldorf.
Asphalt and concrete demolition 70 000m
Solidification produce 70 000m
re-make asphalt construction 70 000m
tarry material thermally recycled 25 000t.
Upgrading of banquet shoulder, surface works, drainage works, sharing the roadway transition construction and renovation of the bridge waterproofing (each for both directions).
Approximately 29 000 m
2fortified road surface (concrete / asphalt)
about 17 000m
approximately 29 000 m
approximately 29 000 m
2Asphalt (both base and binder)
approximately 29 000 m
2Mastic asphalt installing.
. ST Bima - DL THW Horb rehousing conversion Hall 20 Main HBK Type of service: metal construction, hardware and glazing work DIN 18360, 18357, 18361, plastic windows scope of performance: expansion: 2 St metal doors and 3 St windows, Installation: 4 St aluminum door elements and 4 St plastic windows
BAB A 6 T & R Kraichgau Nord in Sinsheim, BA. 3
Retaining walls: L = 25 m, H = 0.80 to 1.80 m / L = 45 m, H = 2.50 m / L = 100 m, H = 4.50 m; Stormwater sedimentation tanks with cover, diameter 14 m, H = approximately 4.75 m; Asphalt: about 6 500m
2; Concrete: 800 m 2; Pavement: about 2 900 m 2,
The construction project comprises the following services:
The construction project is the expansion of clinics Schmieder in Heidelberg to the II. Phase of construction. The new-build II. Phase of construction is located on the existing underground and extends beyond this, with a projection on the east side and supports over a part of the underground car park. The building will be constructed from the ground floor to the 3rd floor in Betonskelettkontruktion with austeifenden walls. The 4th op floor attic, built as a mezzanine floor, in steel construction. The interior non-bearing walls are built as drywalls. - Trockenbauarbeiten walls EC DG, walls with and without fire protection requirements, approx 6000 m² - leveling the drywall
New "B³" education, care and community center Gadamerplatz, 69115 Heidelberg carpentry DIN 18355 (stage construction) Scope of work: Supply and installation of: carpentry indoors in the basement 1st floor in the component C in the multifunctional hall:
The construction project is the expansion of clinics Schmieder in Heidelberg to the II. Phase of construction. The new-build II. Phase of construction is located on the existing underground and extends beyond this, with a projection on the east side and supports over a part of the underground car park. The building will be constructed from the ground floor to the 3rd floor in Betonskelettkontruktion with austeifenden walls. The 4th op floor attic, built as a mezzanine floor, in steel construction. The steel structure is replaced as the top blanket, Level 05, a concrete filigree slab pavement with a thickness of 12 cm. The steel structure in the field of mechanical equipment room, level 05, receives a Trapezblehdach. For all roofs is flat roofs as warm roofs with bitumen waterproofing and green roof. - Dismantling roof waterproofing and insulation ca. 650 m² - installation vapor barrier about 2000 m² - New insulated roof with bitumen sealing layer 04, approximately 550 m² - New insulated roof with bitumen sealing layer 05, approximately 1260 m² - roof extensively, level 04 and 05, ca . 1550 m²
Supply a total of about 1 300 pieces LED lights for outdoor lighting (street lighting) pole-mounting and -Aufsatz in 3 sizes for mounting heights of up to 5.5 m (small size) of 6 m - 9.5 m (medium version) and 10 m mounting height (large construction), overvoltage and lighting a lamp in "mushroom shape / cylinder light", light emission respectively directly downwards, incl. 4 or 5 adriger lead.
Approximately 160 pieces LED post top luminaires "mushroom shape / cylinder light" (such. As Pilzleuchte, cylindrical lamp o. Ä.) In a size for mounting heights of up to 5 m.
Approximately 630 pieces LED lights technical small size as Pole mounted in a frame size for mounting heights of up to 5.5m.
Approximately 355 pieces LED lamps mean technical design as post top and side entry in a size for mounting heights from 6,0m.
Approximately 70 pieces LED lights technical large construction as post top and side entry in a size for mounting heights from 10,0m.
Approximately 75 pieces LED lights mean design as voltage / wire hanging lamps.
New Surgical University Clinic Heidelberg University Hospital, 1 BA Type of service: recycling center / Disposal scope of services: Set up recycling center, operate, recyclable materials recycling, waste dispose of construction debris mineral: about 475 t, rubble plaster base: approx 600 tons of wood-based materials: ca. 400 tons, metal: about 115 t of plastics: about 100 t, Other: 100 t tenderers and their descendants and rental business owners have with their bids the relevant undertakings pursuant to § 5 LTMG, accessible at "www.rp- stuttgart.de /servlet/PB/menu/1359260/index.html "to submit.