Architectural, construction, engineering and inspection services
Subject of the contract to be awarded are the high and medium voltage equipment for the establishment of the "Innovation Centre Campus Bielefeld":
I. The Innovation Centre Campus Bielefeld GmbH is planning the construction of the "Innovation Centre Campus Bielefeld" in close proximity to the university and Fachhochschule Bielefeld. Profile Imaging priorities for the center are the fields of technology "Intelligent Technical Systems" and "Molecular and Nanosciences". The innovation center will be aimed at the market segment I to already market established businesses that want to meet their space requirements for the expansion of the company. By market segment II, the center covers the need for university-related facilities of parent companies that are located in the concept, start or initial development phase, from. This part of the project is supported by funding from the state of NRW and the federal government.
II. Subject of the contract to be awarded are the high and medium voltage equipment for the new "Innovation Center Campus Bielefeld" as follows: system components in the building in the basement: 2 pieces dry transformers 1000 kVA, 1 piece 10 KV medium voltage system, about 15 m
These are the building 5, bridge over the Wierborner Avenue, in construction-km + 1 822 091 and to the structure 6, the bridge over the Wierborner Aue, between construction km 1 + 959,00 and 2 074,00 + of bypass Barntrup.
The advertised in the bill works include the following main benefits:
3Topsoil erode, dispose; 325 m 3Loosen soil, load, dispose of; Making 120 m road ditch; 200 m 3Crushed stone base 0/45; 500 m 2Asphalt base of AC 32 TN; 450 m 2Asphalt surface of AC 11 DS; 200 m banquet prepared.
2deforested forest land clearing; 150 m 3erode topsoil, loading, transport, wiedereinb .; 450 m 2Geotextile signature; 225 t subsoil improvement 0/45; 1800 m 2Chips, d = 10 cm, semi-annually each 450 m 2; 300 m 2Dismantling of the way to completion of BW6; 75 m 3Topsoil andecken; 150 m 2record gravel base layer disposed; 150 m 2producing crushed stone base.
Structure 5:360 m
3record topsoil, dispose; Record Rock, dispose; Soil supply, install; provide ground einb .; 410 m 3Making reinforced concrete for substructures C30 / 37; 160 m 3Reinforced concrete superstructure for C35 / 45 produced; 21 m 3Making reinforced concrete cap C25 / 30; 87 t reinforcing steel for substructures and superstructures signature; Making shoring;
- Installing 62 m steel railings;200 m
Structure 6:100 m
3record topsoil, dispose; Record field, discard; Soil supply, install; 1 000 meters 3Backfilling, deliver cohesive material, einb .; provide ground einb .; 750 m 3Making reinforced concrete for substructures C30 / 37; 1020 m 3Reinforced concrete superstructure for C35 / 45 produced; 127 m 3Making reinforced concrete cap C25 / 30; 310 t reinforcing steel for substructures and superstructures signature; 40 t installing prestressing steel; Making shoring; Install post for guide; 1 370 m 2Superstructure seal.
Tile works for the new factory building HIL - Building 422 in the GFM - Field Marshal Rommel Barracks Augustdorf.
Screed about 28 m
Interior plaster PII about 152 m
Floor Tiles 35 m
Wall tiles 90 m
300 m, Appendix. / Kanalm. 5 Comp. distributed, Flow control systems w ith networking / connectivity via BACnetIP for about 32 laboratories, each with a fume hood, supply air of the exhaust air volume adjusted variably, Datapoints approx .: BT A / B 680 St., BT C / D 400 St., BT UG / VG 115 St, BT Z: 180 St. This part of the project is supported by funding from the state of NRW and the federal government. The equipment and channel materials mentioned above are distributed / installed on 5 components.
Self-sufficient working laboratory ventilation system for variable volume flow control systems with networking / connectivity via BACnetIP for about 32 laboratories, each with a fume hood, the supply air of the exhaust air volume is adjusted variably,180 St.
The road project includes the 2 lane new construction of the B 611 between wages-Witten and Vlotho-Exter as 2nd phase.
The new building begins north of currently provisional CIP at the node with the L 860 and binds to the coming from the motorway interchange wages to the A 30, four-lane B 61st
During the construction of 3 flyovers, 3 rainwater treatment plants and 6 noise barriers are manufactured.
During the construction of the B 611 from Vlotho / Exter to wages / Witten on 2nd BA to the
(1) construction management;
(2) Supervision, and
(3) final audit will be awarded.