Call +44 800 9755 164

Public tenders for construction in Canada

Find all Construction tenders in the world.
Finding business opportunities has never been easier.

Results for construction. Make a new search!

Construction SOA - Mechanical

Public Works and Government Services Canada | Published November 23, 2016  -  Deadline December 21, 2016
Construction SOA - Mechanical

Construction of two H-Frame Structures

Fisheries and Oceans Canada | Published December 5, 2016  -  Deadline December 20, 2016

WORK SITE LOCATION

Catalina, Newfoundland

EXPECTED START AND COMPLETION DATES

The services of the Contractor will be commencing upon contract award. The expected completion date of this project is February 29, 2017.

DELIVERABLES / SCOPE OF WORK

Work of this Contract comprises the construction of two (2) H-Frame electrical transmission structures located at Catalina and Green Island Newfoundland. Work includes, but is not limited to, the following:

  • Accessing the sites.
  • Siting the location of the new pole structures.
  • Construction of the frames, installation of electrical hardware, and stringing conductor between the frames complete with aircraft avoidance balls.
  • Coordinating an electrical outage and relocating the conductors from adjacent poles onto the new structures
  • Demolition and disposal of the existing pole structures.

MANDATORY SITE VISIT

It is mandatory that the Bidder or a representative of the Bidder attends one (1) of the two (2) site visits being held on:

  • Friday, December 9, 2016
  • Wednesday, December 14, 2016

Bidders must register with the Contracting Authority no later than 48 hours prior to confirm attendance and provide the following:

  • Preferred date
  • Name and phone number of the attendee
  • Name and phone number of the next of kin of the attendee

Construction Grade Discer

Department of National Defence | Published November 17, 2016  -  Deadline September 1, 2017
Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Construction Grade Discer  W168A-16CB02/A Marsland, Rina Telephone No. - (306) 241-5742  Fax No. - (306) 975-5397   The Department of National Defence at CFB Wainwright, Denwood, AB has the requirement for the purchase of one (1) Construction Grade Discer for the creation of their fire breaks when required.  The requirement is subject to the provisions of the, the North American Free Trade Agreement (NAFTA), and the Agreement on Internal Trade (AIT).  All the deliverables must be received onor before March 31, 2017. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Construction of the La Bucheraie Building

Public Works and Government Services Canada | Published April 21, 2016  -  Deadline December 5, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   TITLE: Construction of the La Bûcheraie Building, Laurentian Forestry Centre, Québec, QC.  IMPORTANT NOTICE TO BIDDERS  Government of Canada moved its Government Electronic Tendering Service from MERX to Buyandsell.gc.ca/tenders.  Since June 1st2013, Canada makes available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at Buyandsell.gc.ca/tenders.   Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties.   In the event an NPP, bid solicitation or related documentation would be amended, Canada will not be sending notifications. Canada will post all amendments using GETS. It is the sole responsibility of the Bidder to regularly consult GETS for the most up-to-date information.   Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party.  SECURITY REQUIREMENT This request does not contain a security requirement.  PROJECT DESCRIPTION Provide all labor, materials, tools and equipment required to perform the construction of the La Bûcheraie Building on the Laurentian Forestry Centre site. .   MANDATORY CRITERIA PRIOR TO CONTRACT AWARD - CODE OF CONDUCT CERTIFICATIONS - CONSENT T0 A CRIMINAL RECORD VERIFICATION:  Bidders must provide with their bid or promptly thereafter a complete list of names of all individuals who are currently directors of theBidder. If the required names have not been received by the time the evaluation of bids is completed, Canada will inform the Bidder of a time frame within which to provide the information. Failure to comply will render the bid non-responsive.  Canada may, at any time, request that a Bidder provide properly completed and Signed Consent Forms (Consent to a Criminal Record Verification form - PWGSC-TPSGC 229) for any or all individuals aforementioned within the time specified. Failure to provide suchConsent Forms within the time period provided will result in the bid being declared non-responsive.   PERIOD OF WORK The work shall be executed before August 31, 2016.   BUDGET The budget for this project is between 250 001 $ and 500 000 $  INQUIRIES All enquiries regarding this tender, are to be submitted in writing to the Contractual Authority: Steve Simoneau, Supply Officer at steve.simoneau@tpsgc-pwgsc.gc.ca.  TENDER DOCUMENTS Firms intending to submit tenders on this project should obtaintender documents through the Government Electronic Tendering Service (GETS) on Buyandsell.gc.ca/tenders. Drawings and specifications are now published and available free of charge in PDF format only. Bidders should take note that attachments contain thefull set of drawings and specifications, which consist of PDF files organized in an industry-standard directory structure. Addenda, when issued, will be available from GETS. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.  To obtain more information, particularly on how to be informed of any AMENDMENTS to this solicitation, visit Tenders Frequently Asked Questions on BuyandSell.gc.ca/Tenders, under the item Tendernotifications and amendments.        BID RECEIVING Sealed tenders will be received in English or French at the following address:   Services publics & Approvisionnements Canada |Public Services & Procurement Canada 601-1550 Avenue d'Estimauville, Québec (Québec), G1J 0C7.  LANGUAGES This PWGSC office provides acquisition services to the public in both official languages. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Construction – Residential Housing - Saskatchewan

Royal Canadian Mounted Police | Published January 25, 2016  -  Deadline December 2, 2016

Notice of Proposed Procurement

SOLICITATION Number: 201604781 - Construction - Residential Housing - Saskatchewan

Requirement

The RCMP requires new residential housing projects to meet its operational requirements for the delivery of policing services in various locations throughout Saskatchewan. This requirement is for the construction of five (5) new duplexes and two (2) new single family bungalows in the following locations:

  • Two (2) Duplexes in Kamsack, SK;
  • One (1) Duplex in Pinehouse, SK;
  • One (1) Duplex in Panuanak, SK;
  • One (1) Duplex in Coronach, SK; and,
  • Two (2) Single Family Bungalows in Canora, SK.

Each Duplex is approximately 243 m2 (2617 sq. ft.) in size, and each Single Family Bungalow is approximately 113m2 (1219 sq. ft.).

As a result of this solicitation, up to five (5) Contracts may be awarded (one (1) for each geographic location).

** Each location will be evaluated and priced separately.

Work is to be completed by December 31st, 2016.

SITE VISIT: There is no scheduled site visit.

INQUIRIES: All enquiries of a technical nature and all questions of a contractual nature, are to be submitted to the Contracting Authority: Eric Glynn, by email at eric.glynn@rcmp-grc.gc.ca .

Inquiries are to be made in writing and should be received no later than ten (10) business days prior to the closing date to allow sufficient time to respond. Any inquiries received after this date may not be responded to.

Pursuant to GC6 of the General Conditions, the resulting Contract will include the provisions for changes in the Work at the request of the Engineer.

TENDER DOCUMENTS: Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents and are available at the following Website: https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering Service (GETS) web site at https://buyandsell.gc.ca/procurement-data/tenders. Addenda, when issued, will be available on the GETS web site. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.

The Crown reserves the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Drawings and Specifications are now available for viewing and downloading in a Portable Document Format (PDF) or in a standard paper version.

BID RECEIVING: Sealed tenders will be received in English or French at: Royal Canadian Mounted Police (RCMP), Procurement & Contracting Branch, Visitors Centre, 73 Leikin Drive, K1A 0R2, Ottawa, Ontario. Please note that the postal code K1A 0R2 can be used to send documents by mail, but not as a position mark or as guidance tool on a map.

CLOSING DATE: February 12th, 2016 @ 2:00pm EST

Documents may be submitted in either official language of Canada.

The RCMP has published its National Procurement Plan for 2015/16. For further information please see link: http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htm or http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-fra.htm

Carpentry Construction Services Standing Offer

Public Works and Government Services Canada | Published November 23, 2016  -  Deadline December 21, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   EZ899-171759A Ly, Ronny(PWY) Telephone No. - (604) 666-0043 (    ) Fax No. - (604) 775-6633  Title: Carpentry Construction Services Standing Offer   Work Description:  Work under this standing offer is for low dollar Construction, alterations, and urgent repair work, as and when required at various Correctional Services Canada Institutions in the Fraser Valley, B.C.   Work will be performed in accordance with the Statement of Work.  It is PWGSC's intention to authorize up to two (2) Standing Offers, each for a period of one (1) year with two (2) options to extend the Standing Offer for an additional consecutive twelve (12) month period.  The total dollar value of all Standing Offers is estimated to be $2,100,000.00 (GST included).     Tender Enquiries: Ronny Ly, Supply Specialist (604) 666-0043. ronny.ly@pwgsc-tpsgc.gc.ca  Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. In all cases, bidders must indicate (when requested) in the space provided on the tender form the identification number(s) of the addenda, if any, that they have taken into consideration for their bid.  This procurement office provides procurement services to the public in English.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Emergency Genset Construction Saskatoon, Saskatchewan

Environment Canada | Published November 30, 2016  -  Deadline December 20, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   KM571-170516/A Environment and Climate Change Canada  Emergency Genset Construction  Saskatoon, Saskatchewan  REQUIREMENT:  Public Works and Government Services Canada (PWGSC), on behalf of Environment and Climate Change Canada (ECCC) is seeking tenders for the provision of all materials, equipment, labour and supervision for the replacement of the Emergency generator at the National Hydrology Research Centre, 11 Innovation Blvd. Saskatoon, Saskatchewan as detailed in the specifications, drawings and Invitation to Tender Document.  Drawings and Specifications are now available for viewing and downloading in the Portable Document Format (PDF) or in a standard paper version. Tenderers should note that Attachment 1 (ATT 1) contains the Drawings and Specifications Packages (DSP) which consist of PDF files organized in an industry recognized directory structure  Value of Project:  To assist with bonding and insurance requirements, this project is estimated at a value between $250,001 >  $ 500,000  NOTICE  OPTIONAL SITE VISIT There will be a site visit on December 7, 2016 at 1:00 PM Central Standard Time. Interested bidders are to meet at:    Environment & Climate Change Canada (ECCC) National Hydrology Research Centre  11 Innovation Blvd  Saskatoon, Saskatchewan S7N 3H5  Inquiries are to be directed to:  Hector Ho PWGSC Supply Specialist Fax: 780-497-3510 Email: Hector.Ho@pwgsc.gc.ca  This PWGSC Office provides procurement services to the public in English.  IMPORTANT NOTICE TO BIDDERS Notifications about amendments to an opportunity:  Buyandsell.gc.ca/tenders provides a Web feed to keep you informed about amendments to an opportunity of interest.  Firms intending to submit bids on this project should obtain bid documents through the GETS service provider on the Government of Canada Web site at http://buyandsell.gc.ca/procurement-data/tenders. Firms that obtain bid documents from a source other than the official site run the risk of not receiving a complete package.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Marginal wharf construction. Barre-de-Cocagne, NB

Fisheries and Oceans Canada | Published December 6, 2016  -  Deadline December 20, 2016

INVITATION TO TENDER NOTICE

Solicitation #: FP802-160275

Closing Date: Tuesday, December 20th, 2016

Time for solicitation closure: 02:00 PM (EST)

Title: Marginal wharf construction.

Work site location: Barre-de-Cocagne, NB

THIS INVITATION TO TENDER PACKAGE INCLUDES THE FOLLOWING:

  1. Invitation to Tender Notice
  2. Specification (Description of required services)
  3. Drawings/ Plans (13 in total)
  4. Construction Tender Form (Mandatory – Pages 3 & 4 to be completed by Bidder; The Lump Sum Amount AND the Unit Price Table)

Please note: Lump Sum items include all items required to complete the project in accordance with the drawings and specifications (which are not measured for payment), including, but not limited to:

  • Mobilization and Demobilization;
  • Site work;
  • Demolition;
  • Electrical;
  • Berlin Wall;
  • Geotextile;
  • Excavation; and
  • Construction.

CLOSING LOCATION(S):

Bid Bonds: All bids bonds are to be submitted in hard copy ONLY and received by the bid closing time and date to the mailing address indicated below.

Submission of the Construction Tender Form, pricing table (if applies) and all signed addendums must be submitted either electronically or in hard copy to the following:

Hard copy submissions: All hard copy submissions (via Canada Post or by Courier) must be addressed and received by the bid closing time and date to:

Fisheries and Oceans Canada,

Solicitation Number: FP802-160275

Attention: Gricha Zurita

Procurement Hub – Ottawa Office,

Station 9W070, 9th Floor,

200 Kent Street,

Ottawa, Ontario K1A 0E6

Electronic submissions: All electronic submissions must be received by the bid closing time and date to the contracting officer’s email listed below: gricha.zurita@dfo-mpo.gc.ca

The onus is on the bidder to ensure that the bid is delivered on time to the location designated.

Any tender received after the above noted time will be considered late and will be returned to the sender unopened. Tenders may be revised by email, provided the render and revision(s) are both received prior to Tender Closing Time.

SCOPE OF WORK / DELIVERABLES:

The scope of work consists of the furnishing of all plant, labour, equipment and material for this marginal wharf construction at Barre-de-Cocagne, NB. The project is to be completed in strict accordance with the specification and accompanying drawings, and subject to all terms and conditions of the Contract.

In general, work under this contract consists of, but will not necessary be limited to, the following:

  1. Removal and disposal of existing treated timber cribwork structure;
  2. Removal of electrical services to allow for new work;
  3. Relocation of one (1) power pole as shown on drawings;
  4. Transportation and proper disposal of un-recyclable treated timber materials to an approved regional land fill site;
  5. Excavation and proper disposal of un-recyclable fill material including underwater dredging materials;
  6. Construction of new concrete deck and Berlin wall structure as shown in drawings;
  7. Construction of a new concrete deck, timber wheelguard and sheathing;
  8. Supply and installation of granular fill materials, filter fabric, geogrid, asphalt pavement, metal wheelguard as shown on drawings;
  9. Reshaping of the parking area to attain proper surface drainage as shown on drawings;
  10. New electrical work as per electrical drawings and specifications; and
  11. Supply and install floating boom/silt curtain surrounding the work area during work.

    LOCATION OF WORK, WORK SITE AND DELIVERY POINT:

    Barre-de-Cocagne, NB

    FAMILIARIZATION WITH SITE:

    Before submitting a bid, bidders can visit the site and its surroundings, at their own expense, to review and verify the form, nature, and extent of the work, materials needed for the completion of the work, the means of access to the site, severity, exposure, and uncertainty of weather, soil conditions, any accommodations they may require, and in general shall obtain all necessary information as to risks, contingencies, and other circumstances which may influence or affect their bid. No allowance shall be made subsequently in this connection on account or error or negligence to properly observe and determine the conditions that will apply.

    Contractors, bidders, or those they invite to site are to review specification Section 01 35 29 – “Health and Safety Requirements” before visiting site. Take all appropriate safety measures for any visit to site, either before or after acceptance of bid.

    EXPECTED START AND COMPLETION DATES:

    Start Date: Upon contract award.

    Completion Date: December 31, 2017

    SECURITY REQUIREMENTS:

    None.

    MANDATORY REQUIREMENTS:

  1. The tenderer must provide tender security, at the tenderer’s own cost, in accordance with the document entitled "Tender Security Requirements" as Bid Security is required for bids over $100,000. Under these circumstances, the Tender and original signed Bid Bond must be delivered to the Closing Location prior to the closing date.

    Note: All tender securities (Bid Bond) will be returned except that of the successful tenderer (Bidder), which will be retained until the successful tenderer (Contractor) has completed the said contract.

    QUESTION AND ANSWER PERIOD:

    Bidders should note that all questions regarding this Invitation To Tender are to be submitted ONLY in writing by email, no later than Tuesday, December 13th, 2016, 2:00 PM (EST) to the contract Officer listed below. The department may be unable to respond to questions submitted after that date.

    Fisheries and Oceans Canada will not necessarily accept the lowest or any of the tenders received and reserves the right to reject any and all tenders received which shall be final and at the sole discretion of the Department.

    Regards

    Gricha Zurita

    Senior Contracting Officer

    Procurement Hub

    Materiel and Procurement Services

    Financial and Materiel Management Operations

    Fisheries and Oceans Canada

    200, Kent Street

    Ottawa, ON, K1A 0E6, CANADA

    Government of Canada

    Telephone: (613) 993-2807

    Fax: (613) 991-4545

    Email: Gricha.Zurita@dfo-mpo.gc.ca

Plumbing Construction Services, Victoria BC - RISO

Department of National Defence | Published December 16, 2015  -  Deadline December 1, 2016
Trade Agreement: LCSA/AIT Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Plumbing Construction Services, SOA  W0103-156028/A Large, Kathy(pwy) Telephone No. - (604) 666-2891 Fax No. - (604) 775-6633 Email  kathy.large@pwgsc.gc.ca  Title: Plumbing Standing Offer, Dept. Of National Defence, Various locations reporting to CFB Esquimalt, Victoria, BC         Work Description: Work under this standing offer includes the furnishing of all labour, materials, equipment, supervision and transportation necessary to perform plumbing services, maintenance, repairs and upkeep as and when requested by the Dept. of National Defence, CFB Esquimalt, Victoria, BC.    PERIOD OF THE STANDING OFFER   The period for placing call-ups against the Standing Offer shall be for (2) years plus (1) option year commencing from the start date identified on the Standing Offer.  Value of Project: It is anticipated that 1 standing offer will be issued. The total expenditure of the standing offer is $950,000.00 (GST/HST included).  THIS STANDING OFFER CONTAINS A SECURITY REQUIREMENT:  The Contractor/Offeror must, at all times during the performance of the Contract/Standing Offer, hold a valid Facility Security Clearance at the level of Secret issued by the Canadian Industrial Security Directorate (CISD);  and   The Contractor/Offeror personnel requiring access to sensitive work site(s) must EACH hold a valid personnel security screening at the level of Reliability status or personnel security screening at the of SECRET, granted or approved by CISD/PWGSC.  Tender Enquiries: Kathy Large, Supply Officer (604)666-2891. Kathy.large @pwgsc-tpsgc.gc.ca  Firms intending to submit tenders on this project should obtain tender (solicitation) documents through Buyandsell.gc.ca/tenders. Addenda, when issued will be available from Buyandsell.gc.ca/tenders. Firms that elect to base their bids on tender (solicitation) documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid. In all cases,bidders must indicate (when requested) in the space provided on the tender form the identification number(s) of the addenda, if any, that they have taken into consideration for their bid.  This PWGSC office provides procurement services to the public in English. Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

CONSTRUCTION MANAGEMENT SERVICES. BURLINGTON, ON. CCIW LAB MODERNIZATION PLAN IMPLEMENTATION

Public Works and Government Services Canada | Published December 5, 2016  -  Deadline January 17, 2017
Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   EQ754-171503/A   Dhanna, Sheila Telephone No. (416) 512-5855  Fax No. (416) 512-5862 email:  sheila.dhanna@pwgsc-tpsgc.gc.ca  CONSTRUCTION MANAGEMENT SERVICES - BURLINGTON, ONTARIO.  CANADA CENTRE FOR INLAND WATERS (CCIW) LAB MODERNIZATION PLAN IMPLEMENTATION AND OPTIONAL MASTER PLANNING SERVICES.  Public Works and Government Services Canada (PWGSC), on behalf of Environment Canada (EC), intends to retain a Construction Manager (CM) to provide the services for the project as set out in this Request for Proposal (RFP).  Project No:  R.077680.001  The CCIW Lab Modernization Plan Implementation and Optional Master Planning Services project will comprise of the implementation of a portion of the Lab Modernization Plan (LMP, Dialog, 2015), renovating lab W246 through W249 to become swing space for project, and sprinklering the CCIW complex, including NWRI, WTC, and Annex buildings, as outlined in the Fire Safety Upgrades  Sprinkler System study (WSP, July 2016).  The Construction Managers work may be amended to include investigations and/or testing during the optional Master Planning Services phase for the Consultant.   The Construction Manager services will be divided into two phases: Advisory Services and Tender and Construction Services.  For the first deliverable of the Advisory Services, the Project Team and Construction Manager will review all of the existing documentation for the LMP and other required scope, determining what extent of the identified scope of work can be delivered forthe identified project budget.  Once the scope is approved, this work can then proceed into Design Services Phase. The work will incorporate a portion of the scope as identified in the Lab Modernization Plan (LMP; PWGSC, 2015/16).  The LMP is a series of reports and a design concept for modernizing and recapitalizing the A&L buildings laboratorys on floors 4 through 7, and related areas. Other priority projects identified by EC that are included in the base contract include:   Renovating Lab W246 through W249, which is to be utilized as project laboratory swing space for the duration of implementation of the LMP, and   Providing a National Building Code of Canada (NBC) 2015 and NFPA 13 Standard for the Installation of Sprinkler Systems compliant, fully sprinklered CCIW, including NWRI, WTC and Annex buildings, as outlined in the Fire Safety Upgrades  Sprinkler System study (WSP, July 2016) As the entire complex is presently occupied, the project will take into account strategic phasing and be implemented over a 5-year period, to minimize disruption to EC staff and the public.  With the input of the Construction Manager the scope of work will be organized into a series of work packages, which will then be delivered over the course of the project to meet the Clients forecasted cash flow over the 5 years.   The Construction Manager (CM) shall work in collaboration with the project team and stakeholders, by providing: advisory input during design, procurement of Subcontractors and managementof the overall construction of the project until completion.  Optional Site Visit    There will be an optional site visit on January 05, 2017 at 10:00 A.M. Interested Bidders are to meet at the site, main lobby, security desk of the A&L building, 867Lakeshore Road, Burlington, Ontario. Parking Instructions: Contractors can use any visitor designated spot. Personal Protection Requirements: It is recommended that Contractors wear hard hats and steel-toed boots.  Bidders are requested to register with the Contracting Officer, Sheila Dhanna at 416-512-5855, or sheila.dhanna@pwgsc-tpsgc.gc.ca to confirm their attendance and provide the name(s) of the person(s) who will attend 24 hours prior to the site visit. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  This is a two envelope, single phase selection process.  Proponents responding to this RFP are requested to submit a full and complete proposal. A combination of the technical and price of services submissions will constitute the proposal. This procurement contains mandatory requirements; failure to comply will result in rejection of the proposal.   The duration of work is scheduled to be completed by March 31, 2022.  All enquiries of a technical and contractual nature, are to be submitted to the Contracting Officer,  Sheila Dhanna:  e-mail: sheila.dhanna@pwgsc-tpsgc.gc.ca Telephone: (416) 512-5855, or Facsimile:  (416) 512-5862.  Bid Receiving:    Sealed tenders will be received at Public Works and Government Services Canada, 4900 Yonge Street, Bid Receiving, 12th Floor, Toronto, Ontario M2N 6A6.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Construction of a Secure Bay Enclosure for the Fort Chipewyan Detachment in Fort Chipewyan, AB

Royal Canadian Mounted Police | Published June 6, 2016  -  Deadline December 7, 2016

NOTE TO POTENTIAL BIDDERS:

Buyandsell.gc.ca/tenders is the Government of Canada’s Electronic Tendering Service Provider.

Bidders are responsible for obtaining copies of solicitation forms, special instructions, and specifications which are available directly from the buyandsell site. Bidders will arrange to print the documents they require at a printer of their choice or on their own equipment. Addenda, when issued, will be available from the site. It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted offer.

Buyandsell.gc.ca/tenders does not advise potential bidders of changes to any of the projects. It is the responsibility of potential bidders to ensure that they are frequenting the site, ensuring that they are in receipt of all amendments for projects.

Please include, as part of your bid package, copies of all amendments that have been duly signed/initialed verifying proof of receipt.

M5000-17- 1075/A

Construction of a Secure Bay Enclosure for the Fort Chipewyan Detachment in Fort Chipewyan, AB.

Work under this contract will involve, but is not limited to the following for the Royal Canadian Mounted Police (RCMP): Supply of all labour, material, tools, equipment, transportation, and supervision necessary to complete the construction of a secure bay enclosure for the Fort Chipewyan Detachment located in Fort Chipewyan, AB. All work to be carried out in accordance with the specifications as detailed in Annex A and amendments or addendums thereto.

Completion of project: Must be completed by January 13th, 2017.

Security Requirement: There is a security requirement associated with the requirement.

The Crown retains the right to negotiate with suppliers on any procurement.

The RCMP has published its National Procurement Plan. Forfurtherinformation please see link:http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-eng.htmor http://www.rcmp-grc.gc.ca/pubs/cm-gg/index-fra.htm

MODULAR DETACHMENT CONSTRUCTION - TRANSPORTATION – AND INSTALLATION IN AHTAHKAKOOP, SK

Royal Canadian Mounted Police | Published November 18, 2016  -  Deadline December 12, 2016

REQUIREMENT: The purpose of this project is the off-site construction, delivery and on-site installation of a new single storey wood framed modular police building on a new greenfield site in Ahtahkakoop, Saskatchewan. All associated site work is included. Site construction of a single storey wood framed outbuilding on the site is also required. The modular police building is approximately 1054m² in area. The outbuilding is approximately 75 m² in area. See attached specifications and drawings for detailed scope of work. The modular units MUST be built off-site in an environmentally controlled environment and transported to the site for installation. On-site construction proposals will NOT be considered.

ABORIGINAL CONTENT: Bids must include a minimum 10% aboriginal benefit as defined in tender documents. Bids with insufficient aboriginal benefit will be deemed non-compliant.

SITE VISIT: The site is currently available to the public for viewing at any time. No scheduled visit exists.

DELIVERY DATE: Substantial completion by April 30, 2018 AND fully complete the work by July 31st, 2018

INQUIRIES: All enquiries of a technical nature and all questions of a contractual nature, are to be submitted to the Contracting Authority: Dale Rudderham, by email at dale.rudderham@rcmp-grc.gc.ca.

Inquiries are to be made in writing and should be received not less than ten (10) calendar days prior to the closing date to allow sufficient time to respond.

TENDER DOCUMENTS: Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents and are available at the following Website: https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual Bidders that consider themselves qualified to provide this Work and intend to submit bids on this project should obtain tender documents through the Government Electronic Tendering Service (GETS) web site at https://buyandsell.gc.ca/tenders. Addenda, when issued, will be available on the GETS web site. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk.

The Crown reserves the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Pursuant to GC6 of the General Conditions, the resulting Contract will include the provisions for changes in the Work at the request of the Engineer.

Drawings and Specifications are now available for viewing and downloading in a Portable Document Format (PDF).

BID RECEIVING: Emailed or Facsimiled submissions will not be accepted. Sealed tenders will be received in English or French at the following address: Royal Canadiam Mounted Police (RCMP) Bid Receiving, Procurement and contracting Services, 73 Leikin Drive, Visitor Center – Building M1 Mailstop #15, Ottawa ON K1A 0R2

CLOSING DATE: December 12, 2016 at 2:00 PM ET

The RCMP has published its National Procurement Plan for 2016/17. For further information please see link: http://www.rcmp-grc.gc.ca/en/rcmp-national-procurement-plan

RCMP has adopted the Integrity Regime administered by PSPC. As a result, the integrity provisions are being applied in RCMP contracting activities as outlined in this solicitation

Pre-Tender Optional Site Visit and Information Session, Main Construction Manager, Giant Mine

Public Works and Government Services Canada | Published September 21, 2016  -  Deadline December 30, 2016
Trade Agreement: NONE Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: Yes Nature of Requirements:   INFORMATION FROM PRE-TENDER OPTIONAL SITE VISIT FOR MCM  MAIN CONSTRUCTION MANAGER (MCM), GIANT MINE REMEDIATION PROJECT,  YELLOWKNIFE, NT  EW702-141166/E Bogus, Katherine Telephone No. - (587) 920-3075 (    ) Fax No. - (780) 497-3510 (    )  Public Works and Government Services Canada (PWGSC), on behalf of Indigenous and Northern Affairs Canada (INAC), is preparing bid documents and the Terms of Reference for the Main Construction Manager (MCM) contract for the Giant Mine Remediation Project in Yellowknife, Northwest Territories.  Prior to posting the Request for Proposal (RFP), PWGSC held an optional surface site visit for potential bidders interested in submitting a proposal for the Main Construction Manager contract. The intent of the site visit was to provide potential bidders with the opportunity to see the sites surface well before snow and winter set in, as the RFP is anticipated to be posted in Fall 2016. An additional surface tour may be available during the solicitation period but historically the value of surface tours in the fall/winter season is limited by weather conditions.  An underground tour may be held during the solicitation period. This Notice only describes an anticipated solicitation, provision of a Notice and attendance at the site visit does not constitute a contract between Canada/PWGSC and the interested bidder.  The MCM contract may include (but not be limited to) the following tasks/activities;   Role of Mine Manager responsible for overall Site Health &Safety as per the Government of the Northwest Territories (GNWT) Mines Act  Care and Maintenance (C&M) - either through a sub-contract or through Novation of an existing PWGSC C&M Contract.  Development and implementation of a Site Wide EnvironmentalMonitoring Program (EMP) and other aspects of a Site Wide Environmental Management System (including the Air Monitoring Program)  either through a sub-contract or through Novation of existing PWGSC Contracts.   Conversion of Design Packages to Construction Packages   Construction Sequencing and Scheduling   Constructability and Construction Risk Assessment   Assistance with Development of Substantive Cost Estimate to support Effective Project Approval (EPA) by PWGSC and INAC   As and When Construction Work to mitigate immediate Health, Safety or Environmental Risks identified by the Project Team (MCM, PWGSC, INAC and GNWT)   Completion of outstanding Advanced Remediation Construction Activities (if necessary)   Execution of the Remediation Work Packages as a General Contract using Sub-Contracts   3. Agenda was as follows: a. 9:30 AM   10:00 AM: Registration b. 10:00 AM  10:15 AM: Welcoming remarks & Procurement Overview c. 10:15 AM - 10:30 AM: Project Status Update c. 10:30 AM11:15 AM: Tour Objectives & Overview d. 11:15 AM  12:30 PM: Lunch (not provided) e. 12:30 PM  3:00 PM: Safety Orientation & Bus Tour  f. 3:00 PM  3:30 PM: Final Remarks   SOURCING: PWGSC intends to post this RFP on the Government Electronic Tendering Service at https://www.buyandsell.gc.ca/tenders, where potential bidders interested in submitting a proposal will be required to download the documents. This competitive requirement will be subject to the World Trade Organization-Agreement on Government Procurement (WTO-AGP), the North America Free Trade Agreement (NAFTA, and the Agreement on Internal Trade (AIT).  The requirements of the Tlicho Land Claim and Self Government Agreement will apply to this procurement. The provisions that applyare contained in: Chapter 26  Economic Measures, of the Tlicho Land Claim and Self Government Agreement, clauses 26.3, 26.3.1 (a).     http://www.aadnc-aandc.gc.ca/DAM/DAM-INTER-HQ/STAGING/texte-text/ccl_fagr_nwts_tliagr_tliagr_1302089608774_eng.pdf The Government of Canada is committed to a fair, open, transparent and competitive procurement process.  Documents may be submitted in either official language of Canada.  BACKGROUND:  Giant Mine, located in Yellowknife, operated under several owners for approximately 56 years, starting in 1948. In 1999, then owner, Royal Oak Mines Inc., went into receivership. The Government of Canada has taken on the responsibility of the existing environmental liabilities on the property, including approximately237,000 tonnes of arsenic trioxide, stored in underground chambers. The Giant Mine site is currently under Care and Maintenance while the Project enters its Design phase before full remediation begins. The implementation phase of the remediation plan will have a number of individual components including, but not limited to: in-situ encapsulation of arsenic trioxide waste; tailings management; improvements/amendments to Baker Creek; surface water management; building demolition; managing surface openings and pit closures; and management, storage, handling, and/or disposal of hazardous materials and contaminated soils.   Further information on the Giant Mine Remediation Project may be found at: https://www.aadnc-aandc.gc.ca/eng/1100100027364/1100100027365    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Replac. of visual aids & construction of new facilities for Field Electrical Center Blanc sablon, QC

Public Works and Government Services Canada | Published April 18, 2016  -  Deadline December 5, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Replacement of visual aids and construction of new facilities for Field Electrical Center (FEC) in Blanc-Sablon Airport (Quebec)  The project includes, without limitation, the construction of a prefabricated building for the electrical field center fitted and tested at the factory, the transportation, the installation on site, including foundations, electrical power, control.  There will be no site visit for this project.   PROJECT ESTIMATE: between $1,000,001 and $5,000,000  INQUIRIES: All enquiries regarding this tender, are to be submitted in writing to the Contractual Authority: Julie Desforges, Supply Officer, fascimile (514) 496-3822 or by e-mail at julie.desforges@tpsgc-pwgsc.gc.ca  The Crown reserves the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada. Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents.    TENDER DOCUMENTS:Firms intending to submit tenders on this project should obtain tender documents through the website https://buyandsell.gc.ca service provider. Addenda, when issued, will be available from the service provider. Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk and will be solely responsible to inform the tender calling authority of their intention to bid.         BID RECEIVING: Sealed tenders will be received in English or French at: Public Works and Government Services Canada, Place Bonaventure, South-East Portal, 800 de la Gauchetiere Street West, suite 7300, Montreal.   This PWGSC office provides acquisition services to the public in both official languages.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Construction Manager Services, Prince Albert Satellite Station Bundled Projects, Prince Albert, SK

Public Works and Government Services Canada | Published November 24, 2016  -  Deadline December 20, 2016
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Construction Manager Services, Prince Albert Satellite Station  Bundled Projects, Natural Resources Canada (NRCan), Prince Albert, Saskatchewan   EV385-171797/A Fagan, Mike  Telephone No. - (204) 296-5375  Fax No. - (204) 983-7796 Email: mike.fagan@pwgsc-tpsgc.gc.ca   Public Works and Government Services Canada (PWGSC) intends to retain the services of a Construction Manager (CM) to provide advisory and general contractor services for the NRCan Prince Albert Satellite Station bundled projects. This project is a grouping of five distinct projects for replacement and/or upgrades to various building systems in the Prince Albert Satellite Station main operations building, as more fully described in the Terms of Reference (TOR).  Services required for this project, but not limited to, are as follows:    1.  Advisory Support Services,   2.  Cost Management Services,   3.  Schedule Management Services,   4.  Risk Management Services,   5.  Quality Management Services,   6.  CommissioningServices,   7.  Tendering Services,   8.  General Contractor Services, and   9.  General Construction and Contract Administration Services.  OPTIONAL SITE VISIT  There will be an optional site visit on Thursday, December 1, 2016 at 11.00 am. Interested bidders are to meet at the Prince Albert Satellite Station main building reception in Bucklands, Prince Albert, Saskatchewan. Bidders are requested to communicate with the Contracting Authority three (3) days before the scheduled visit to confirm attendance and provide the name(s) of the person(s) who will attend. Bidders who, for any reason, cannot attend at the specified date and time will not be given an alternative appointment to view the site.  No exceptions will be made.  Site direction: From the intersection of 2 Avenue West and Marquis Road (Prince Albert); Drive North, over the river, past Riverside Drive; Turn left onto HTP (highway) 3 and 55; Drive West for 17km (19mins); Turn left into unnamed road (see road sign prior), this leads to the Prince Albert Satellite Station main building.   Bidders are responsible for obtaining copies of bid forms, special instructions and amendments issued prior to bid closing, and are to ensure they are addressed in the submitted bid.   Thisprocurement contains mandatory requirements. Failure to comply may result in rejection of your bid.   Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the bid and contract documents. The standarddocuments are issued by Public Works and Government Services Canada and may be viewed at (https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual).    Firms intending to submit bids on this project should obtain bid documents through the GETS service provider on the Government of Canada Web site at http://buyandsell.gc.ca/procurement-data/tenders.  Firms that obtain bid documents from a source other than the official site run the risk of notreceiving a complete package.  Closing Date: December 20, 2016, 14:00h.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Construction of Conuma River Hatchery Back-up Water Supply

Fisheries and Oceans Canada | Published December 18, 2015  -  Deadline December 1, 2016
This bid solicitation cancels and supersedes previous bid solicitation number FP802-150168, dated, November 5, 2015 with a closing of November 19, 2015 at 2:00pm (EST). A debriefing or feedback session will be provided upon request to bidders/offerors/suppliers who bid on the previous solicitation.
Work covered by this contract includes but is not limited to supply and installation of pump and motor and all associated civil, mechanical and electrical works to provide a backup water supply to the Conuma River Hatchery from an existing well on site.

Civil / Structural Bridge Engineering Services SOA Various National Parks (Atlantic Canada)

Parks Canada | Published November 26, 2015  -  Deadline December 1, 2016
Requirement:
Parks Canada Agency (PCA) has a requirement for the provision of structural engineering services and other services in-house or through sub-consultants such as, but not limited to, bridge inspections and investigations, analysis and development of project requirements, load evaluations, structural analysis, design, construction services, and preparation of tender documents. These services will be on an ‘’as and when requested’’ basis primarily in National Parks and in National Historic Sites located in the provinces of Newfoundland, Nova Scotia, New Brunswick and Prince-Edward-Island. Projects will be related mainly to fixed vehicular bridges with some work needed for culverts, pedestrian bridges, communication towers and observation towers.
Proponents shall be licensed or eligible to be licensed to practice in the provinces of Newfoundland, Nova Scotia, New Brunswick and Prince-Edward-Island.
Project Timeline:
It is Parks Canada’s intention to authorize two (2) Standing Offers for a period of five (5) years.
The total dollar value expended under the Standing Offers is estimated to be $15,000,000.00 (GST/HST Included).
Proponents should note that there is no guarantee that the full or any amount of the Standing Offer will be called-up; PCA will award call-ups only when the specific services to be provided under the Standing Offer are needed.
Bid Submission:
Bids are to be sent to:
Parks Canada Agency
Contracting Operations
Suite 1300 - 635 8 Avenue SW
Calgary, Alberta T2P 3M3
Information:
National Parks Regulations require that all work is to be performed in accordance with the ordinances, laws, rules and regulations set out in the National Park Act.
Bidders that consider themselves qualified to provide this Work and intend to submit bids on this project should obtain documents from the Government Electronic Tendering Service through the Government of Canada tendering service at www.buyandsell.gc.ca/tenders . Addenda, when issued, will be available from the Government of Canada tendering service. Bidders that elect to base their bids on documents obtained from other sources do so at their own risk. Late submissions will not be considered.
This PCA office provides procurement services to the public in English.
Canada retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.

RCMP OP COMM Centre Relocation Proj

Royal Canadian Mounted Police | Published September 2, 2016  -  Deadline December 10, 2016
Trade Agreement: WTO-AGP/NAFTA/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   The services of an Architectural firm, acting as Prime Consultant, are required to undertake the design and construction administration / review services needed to construct a new secure special purpose operational facility in the National Capital Region for the RCMP. The project consists, but is not limited to the construction of a new building to be located on an existing secure RCMP campus in the National Capital Region. The new building will have an estimated functional area requirement of 1415m2of net usable space (2024m2 gross area), to house all the functions of the RCMP.  Site development will be required to provide site preparation, road access, parking areas, pedestrian access routes, support functions to the new facility and facilitate utility connections. As Prime Consultant, the selected Architectural firm will provide a full consulting Team including the required expertise in civil, structural, mechanical, electrical, LEED certification, landscape architecture, interior design, systems furniture and equipment specialists, audio visual systems specialists, network infrastructure systems specialists, signage and way finding specialists, project costing, scheduling and commissioning Consultants.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Lethbridge RDC Laboratory Annex Exterior Envelope Replacement, Lethbridge, Alberta

Public Works and Government Services Canada | Published December 5, 2016  -  Deadline October 1, 2017
Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Lethbridge Research and Development Centre Laboratory Annex Exterior Envelope Replacement, Lethbridge, Alberta.  EP922-171869/A Tikhonovitch (RPC), Alex Telephone No. - (780) 901-7940  Fax No. - (780) 497-3510  Email: alex.tikhonovitch@pwgsc-tpsgc.gc.ca  CONSTRUCTION MANAGEMENT SERVICES  This project involves the replacement of the exterior envelope of the Laboratory Annex at the Lethbridge Research and Development Centre in Lethbridge, Alberta.  OPTIONAL SITE VISIT  There will be a site visit on December 20, 2016 at 12:00 pm.  Interested bidders are to meet at:  Lethbridge Research and Development Centre 5403  1St Avenue South Lethbridge, AB  T1J-4B1 (meet in the main entrance lobby)   A Construction Manager (CM) is required for the project to provide advisory and general contractor services.  CODE OF CONDUCT: "IMPORTANT NOTICE:  New measures related to Code of Conduct and certifications included in the solicitation documents requires attention."  BIDDOCUMENTS: Bidders mayvisit Buyandsell.gc.ca/tenders to register as a subscriber and to order a copy of the bid document or to find out more information about their services.       The Crown retainsthe right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

RISO - Gravel

Parks Canada | Published December 2, 2016
Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Gravel  5P128-160321/A  JACQUELYN STEVENSON Telephone #:   902.403.3520 Fax #:  902.496.5016  Parks Canada  has a requirement to procure various types of construction aggregate in support of ongoing projects. There are three destinations where delivery will be required; the Fortress of Louisbourg National Historic Site, Ingonish Beach, and Cheticamp.   For complete descriptions of the various types of construction aggregate, please refer to Annex A.  Work under this Standing Offer Agreementcomprises the furnishings of all labour, equipment, tools and supervision.    Trade Agreements: The requirement is subject to the provisions of the Agreement on Internal Trade (AIT). The North American Free Trade Agreement (NAFTA).  The World Trade Orginization (WTO).  INQUIRIES  All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contracting Authority: JACQUELYN STEVENSON, telephone:  902.403.3520    Facsimile: 902.496.5016. E-Mail: Jacquelyn.stevenson@pwgsc.gc.ca     Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond.  This PWGSC office provides procurement services in English.     Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.