Public tenders for helmets in Denmark

Find all Clothing tenders in the world.
Finding business opportunities has never been easier.

Results for clothing. Make a new search!

Helmets

Danish Defence Acquisition and Logistics Organization | Published September 23, 2014  -  Deadline October 23, 2014
cpvs
18444110, 32510000

Helmets

Noise protection helmets and portable wireless intercom for F-16.

Danish Defence Acquisition and Logistics Organization | Published September 11, 2014  -  Deadline October 14, 2014
cpvs
32510000

DALO entents to procure: Lot 1. Noise protection helmets with ability to communicate in groups of min. 2 persons. The helmets will be used by technical personnel working with F-16 fighter jet, while the jet engine is running. Lot 2. Portable Wireless intercom equipment approved for use with an F-16 by the manufacturer of the F-16. The intercom equipment will be used with the noise protection helmet. This contract notice replaces cancelled contract notice 20113/S 245-426398.

Noise protection helmets and portable wireless intercom system for F-16.

Danish Defence Acquisition and Logistics Organization | Published March 6, 2015
Winner
CeoTronics AG
cpvs
18444110, 32510000

DALO has entered into a frame work agreement with a single operator for a period of 4 years regarding the purchase of noise protection helmets and wire less intercom system for the technical personnel working with and F-16 with the engine running.

military helmets

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 14, 2012  -  Deadline January 23, 2012
cpvs
35813000

military helmets

Military helmets

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 18, 2012  -  Deadline March 12, 2012
cpvs
35813000

Military helmets

Military helmets

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 14, 2012  -  Deadline January 23, 2012
cpvs
35813000

Military helmets

military helmets

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 18, 2012  -  Deadline March 12, 2012
cpvs
35813000

military helmets

Helmets 2014 / S 182-320599

Forsvarets Materieltjeneste | Published September 23, 2014  -  Deadline October 23, 2014
cpvs
18444110, 32510000

Helmets

military helmets

Danish Defence Acquisition and Logistics Organisation (DALO) | Published September 28, 2012
Winner
Revision Military B.V. Wim Duisenbergplantsoen 31 6221 SE Maastricht NETHERLANDS Telephone: +31 432010674 Internet address: http://www.revisionmilitary.com/
cpvs
35813000

The helmet is tendered as a "Military off-the-shelf" product. The helmet has a high protection level against both fragments & projectiles. Furthermore the helmet has been Operational Tested; which means that the helmet has been tested by a unit from NATO Allies partner with a documented appertaining evaluation. Minimum requirements: The coverage area of the helmet must correspond to Medium Cut (ACH). To support the soldier’s situational awareness, the helmet is available in 4 sizes covering a circumference of 54-64 centimeters and there is 2 possibilities of adjusting the helmet ensuring that it can be firmly tightened. The construction of the helmet allows the adjustment to be carried out using one hand without leaving any loose straps. The helmet retention system is a four point harness system. Furthermore, the helmet is designed to be used by soldiers operating the weapon from either the left or the right side. The material used contributes to a low overall weight and the weight of helmets with a circumference of 56-59 centimeters does not exceed 1 250 grams. A low weight with a high protection level against both fragments & projectiles has been given a high score in the evaluation. Ballistic screws is used. The helmet is designed to allow mounting of standard equipment for a combat soldier e.g. sensors, battlefield combat identification, sights and with the possibility to add counterbalance on the back of the helmets. Mounting of mandible guard to secure the soldier from stroke and shock is possible. The helmet is delivered with or is prepared for the mounting of a bracket for using NVG. The helmet is compatible with protective glasses of the type Wiley-X Saber, Ess-Cross Bow and Revision Sawfly as well as CBRN mask Avorn FM12 and with infantry headset Invisio X5 (S10). Mandible guard and helmet covers will be requested in a smaller quantity, however. The cover is designed allowing the use of rails and NVG. For camouflage of the helmet, covers / net / similar is available. The helmet is delivered in Coyote tan/brown. Spare parts for replacing straps, pads, etc., will be requested. The following products/accessories are listed as options to the tender: a. Delivery of the helmet in Multicam ® color; b. Visor for the helmet; c. A high cut helmet with the same protection as will be demanded for the medium cut (ACH) helmet together with ear protection equipment to be mounted allowing the use of headsets. The protection level for the ear protection must be of the same level as that of the helmet; d. The medium cut (ACH) helmet certified in accordance with DS/EN 397; e. Delivery of Combat Riot Control (CRC) equipment that can be mounted on the helmet.

Acquisition of military helmets.

Danish Defence Acquisition and Logistics Organisation (DALO) | Published September 28, 2012
Winner
Revision Military B.V.
cpvs
35813000

The helmet is tendered as a "Military off-the-shelf" product. The helmet has a high protection level against both fragments & projectiles. Furthermore the helmet has been Operational Tested; which means that the helmet has been tested by a unit from NATO Allies partner with a documented appertaining evaluation. Minimum requirements: The coverage area of the helmet must correspond to Medium Cut (ACH). To support the soldier’s situational awareness, the helmet is available in 4 sizes covering a circumference of 54-64 centimeters and there is 2 possibilities of adjusting the helmet ensuring that it can be firmly tightened. The construction of the helmet allows the adjustment to be carried out using one hand without leaving any loose straps. The helmet retention system is a four point harness system. Furthermore, the helmet is designed to be used by soldiers operating the weapon from either the left or the right side. The material used contributes to a low overall weight and the weight of helmets with a circumference of 56-59 centimeters does not exceed 1 250 grams. A low weight with a high protection level against both fragments & projectiles has been given a high score in the evaluation. Ballistic screws is used. The helmet is designed to allow mounting of standard equipment for a combat soldier e.g. sensors, battlefield combat identification, sights and with the possibility to add counterbalance on the back of the helmets. Mounting of mandible guard to secure the soldier from stroke and shock is possible. The helmet is delivered with or is prepared for the mounting of a bracket for using NVG. The helmet is compatible with protective glasses of the type Wiley-X Saber, Ess-Cross Bow and Revision Sawfly as well as CBRN mask Avorn FM12 and with infantry headset Invisio X5 (S10). Mandible guard and helmet covers will be requested in a smaller quantity, however. The cover is designed allowing the use of rails and NVG. For camouflage of the helmet, covers / net / similar is available. The helmet is delivered in Coyote tan/brown. Spare parts for replacing straps, pads, etc., will be requested. The following products/accessories are listed as options to the tender: a. Delivery of the helmet in Multicam ® color; b. Visor for the helmet; c. A high cut helmet with the same protection as will be demanded for the medium cut (ACH) helmet together with ear protection equipment to be mounted allowing the use of headsets. The protection level for the ear protection must be of the same level as that of the helmet; d. The medium cut (ACH) helmet certified in accordance with DS/EN 397; e. Delivery of Combat Riot Control (CRC) equipment that can be mounted on the helmet.

Acquisition of military helmets.

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 14, 2012  -  Deadline March 12, 2012
cpvs
35813000

:The helmet will be tendered as a “Military off-the-shelf” product. The helmet must have a high protection level against both fragments & projectiles. Furthermore the helmet must have been Operational Tested; which means that the helmet has been tested by a unit from NATO Allies partner with a documented appertaining evaluation. Minimum requirements: The coverage area of the helmet must correspond to MEDIUM CUT (ACH). To support the soldier’s situational awareness the helmet must be available in 4 sizes covering a circumference of 54-64 centimetres and there must be 2 possibilities of adjusting the helmet ensuring that it can be firmly tightened. The construction of the helmet must allow the adjustment to be carried out using one hand without leaving any loose straps. The helmet retention system must, as a minimum, be a four point harness system. Furthermore, the helmet must be designed to be used by soldiers operating the weapon from either the left or the right side. The material used should contribute to a low overall weight and the weight of helmets with a circumference of 56-59 centimeters should not exceed 1 250 grams. A low weight with a high protection level against both fragments & projectiles will be given a high score in the evaluation. Ballistic screws must be used. The helmet must be designed to allow mounting of standard equipment for a combat soldier e.g. sensors, battlefield combat identification, sights and with the possibility to add counterbalance on the back of the helmets. Mounting of mandible guard to secure the soldier from stroke and shock must also be possible. The helmet must be delivered with or must be prepared for the mounting of a bracket for using NVG. The helmet must be compatible with protective glasses of the type WILEY-X SABER, ESS-CROSS BOW and REVISION SAWFLY as well as CBRN mask AVORN FM12 and with infantry headset INVISIO X5 (S10). Mandible guard and helmet covers will be requested in a smaller quantity, however. The cover should be designed allowing the use of rails and NVG. For camouflage of the helmet, covers / net / similar must be available. The helmet must be delivered in Coyote tan/brown. Spare parts for replacing straps, pads, etc., will be requested. The following products/accessories are expected to be listed as options to the tender: a. delivery of the helmet in Multicam ® color; b. visor for the helmet; c. a high cut helmet with the same protection as will be demanded for the medium cut (ACH) helmet together with ear protection equipment to be mounted allowing the use of headsets. The protection level for the ear protection must be of the same level as that of the helmet; d. the medium cut (ACH) helmet certified in accordance with DS/EN 397; e. delivery of Combat Riot Control (CRC) equipment that can be mounted on the helmet.

Acquisition of military helmets.

Danish Defence Acquisition and Logistics Organisation (DALO) | Published February 14, 2012  -  Deadline March 12, 2012
cpvs
35813000

The helmet will be tendered as a “Military off-the-shelf” product. The helmet must have a high protection level against both fragments & projectiles. Furthermore the helmet must have been Operational Tested; which means that the helmet has been tested by a unit from NATO Allies partner with a documented appertaining evaluation. Minimum requirements: The coverage area of the helmet must correspond to MEDIUM CUT (ACH). To support the soldier’s situational awareness the helmet must be available in 4 sizes covering a circumference of 54-64 centimetres and there must be 2 possibilities of adjusting the helmet ensuring that it can be firmly tightened. The construction of the helmet must allow the adjustment to be carried out using one hand without leaving any loose straps. The helmet retention system must, as a minimum, be a four point harness system. Furthermore, the helmet must be designed to be used by soldiers operating the weapon from either the left or the right side. The material used should contribute to a low overall weight and the weight of helmets with a circumference of 56-59 centimeters should not exceed 1 250 grams. A low weight with a high protection level against both fragments & projectiles will be given a high score in the evaluation. Ballistic screws must be used. The helmet must be designed to allow mounting of standard equipment for a combat soldier e.g. sensors, battlefield combat identification, sights and with the possibility to add counterbalance on the back of the helmets. Mounting of mandible guard to secure the soldier from stroke and shock must also be possible. The helmet must be delivered with or must be prepared for the mounting of a bracket for using NVG. The helmet must be compatible with protective glasses of the type WILEY-X SABER, ESS-CROSS BOW and REVISION SAWFLY as well as CBRN mask AVORN FM12 and with infantry headset INVISIO X5 (S10). Mandible guard and helmet covers will be requested in a smaller quantity, however. The cover should be designed allowing the use of rails and NVG. For camouflage of the helmet, covers / net / similar must be available. The helmet must be delivered in Coyote tan/brown. Spare parts for replacing straps, pads, etc., will be requested. The following products/accessories are expected to be listed as options to the tender: a. delivery of the helmet in Multicam ® color; b. visor for the helmet; c. a high cut helmet with the same protection as will be demanded for the medium cut (ACH) helmet together with ear protection equipment to be mounted allowing the use of headsets. The protection level for the ear protection must be of the same level as that of the helmet; d. the medium cut (ACH) helmet certified in accordance with DS/EN 397; e. delivery of Combat Riot Control (CRC) equipment that can be mounted on the helmet.

Supply of helmets

Beredskabsstyrelsen | Published September 9, 2016  -  Deadline October 20, 2016
cpvs
18444110, 35110000

Emergency Management provider framework agreements on the supply of helmets for the Danish rescue service.
Procedure:
To participate in the task inserted this link into your internet browser: http://permalink.mercell.com/61367569.aspx Here you register the task by pressing the icon at the top: "Sign your interest." If you are not a licensee of Mercell Denmark A / S must fill out a registration of your company. This registration is required for your continued participation and is at no cost.
After sending the registration you have access to all files and information about the task. You will receive login codes to www.mercell.dk within normal working hours and can then send your offer / request.

CVC Helmets and Headsets for mounted and dismounted soldiers

Forsvarsministeriets Materiel- og Indkøbsstyrelse (The Danish Defence Acquisition and Logistics Organization) | Published November 24, 2017
Winner
Not applicable due to cancellation of tender
cpvs
32342100

The tender procedure has been cancelled due to only non-compliant offers have been submitted.

Bicycle Helmets 2014 / S 104-182634

ODENSE KOMMUNE | Published May 31, 2014  -  Deadline August 15, 2014
cpvs
18444112, 34430000, 34422000, 34432000, 34432100

Bicycle Helmets Bicycles, accessories and spare parts for municipal employees to use work time.

Noise protection helmet for technical personnel working with F-16 jet fighter.

Danish Defence Acquisition and Logistics Organization | Published December 18, 2013  -  Deadline January 28, 2014
cpvs
18444000, 18444100, 18444110

DALO wish to procure protection helmets with noise protection with ability to communicate in groups of 2-4 persons. The helmets will be used by F-16 fighter jet technical personnel, while the jet engine is running. The offered helmets are subject to a test performed by DALO, together with the evaluation of tenders. The tenderers should therefore deliver four (4) helmets, including cords, plugs, PTT for testing, as described in the tender instructions.

Luggage, saddlery, sacks and bags

Danish Defence Acquisition and Logistics Organisation | Published July 19, 2016  -  Deadline September 8, 2016
cpvs

Procurement of a transport and travel bag system, which will meet the increasing demands for transporting personal equipment. The increasing demand of the single soldier's equipment, including for example, the protection vest PICO MV by TYR TACTICAL with attached systems, weapons, helmets, uniforms etc. must be covered with the new bags.

Requirement Specification Helmet liner

Forsvarsministeriet, Departementet | Published July 13, 2016  -  Deadline August 17, 2016
cpvs
35811300

Tender for Requirement Specification Helmet liner from
Danish Defence Acquisition and Logistics Organization

Please note the Schedules for the tender

Test equipment for the F-16 Joint Helmet Mounted Cueing System.

Danish Defence Acquisition and Logistics Organization | Published September 6, 2014
Winner
Vision Systems International LLC4700 Marine Creek Parkway, TXFort Worth 76179
cpvs
35700000

Acquisition of the following test equipment for the F-16 Joint Helmet Mounted Cueing System to sustain the Royal Danish Air Force F-16 fleet: — 1 EA Test Set FACT Electro-magnetic field.

Safety equipment 2015 / S 247-449204

SamAqua A/S | Published December 22, 2015  -  Deadline January 19, 2016
cpvs
35113000, 18100000, 18200000, 18300000, 18400000, 18800000

This pre-qualification relates to Lot 2: protective equipment (gloves, ear protection, eye protection, helmets and other articles). Offering comprises overall supply of workwear, protective clothing, corporate clothing, ordinary footwear, safety footwear and protective equipment including gloves, fall protection, eye protection, helmets and other protective equipment. The tender is divided into 2 lots, respectively: - Lot 1: clothing and footwear (industrial, protective and profile clothing and almindeligt- and safety footwear) - Lot 2: protective equipment (gloves, ear protection, eye protection, helmets and other articles). There has also been established prequalification of deltale 1. Applicants may apply for prequalification in one or both lots. By application must disclose which one (s) lot (s) requested to be prequalified. The Offering is subject to the European Parliament and Council Directive no. 2004/18 / EC of 03.31.2004 on the coordination of procedures for the award of public works contracts-ter, public service contracts and public works contracts. The offering is a limited supply. Procedure: Contracting entity has chosen to implement this task digitally through Mercell Denmark A / S. To participate in the task copy this link to your browser: http://permalink.mercell.com/55361775.aspx Here you register the task by clicking on the icon at the top: "Sign your interest. ' If you are not a licensee of Mercell Denmark A / S must fill out a registration of your company. This registration is required for your continued participation and without cost. After sending the registration you have free access to all documents. You will receive login codes www.mercell.dk within normal working hours and can then send your offer / application.