Public tenders for cleaning in Syracuse United States

Find all Cleaning tenders in the world.
Finding business opportunities has never been easier.

Results for cleaning. Make a new search!

Z--Fuel cleaning and fill.

Department of the Army, National Guard Bureau | Published May 19, 2015
cpvs

Fuel cleaning and fill award.

Z--Building Facade Parapet Repairs

Department of Veterans Affairs, Bath VAMC | Published May 6, 2015  -  Deadline June 26, 2015
cpvs

This pre-solicitation notice is to inform that the VA Medical Center, Syracuse, New York will be posting a solicitation on or about the May 22th, 2015 for Parapet Masonry Repair, Project No. 528A7-14-709. The Syracuse VAMC has a need to repair the brick parapets on the hospital (Building 1 and Building 2) and correct the deterioration of the masonry and supporting angles Syracuse VA, Syracuse NY. The project includes the following scope items: removal and replacement of existing parapets. The brick shall be removed to the support angle or the top the window lintel and replaced in kind or will be replaced with new metal enclosure as depicted on the drawings. Removal of Existing Parapet: The Contractor shall perform work required to remove existing parapet and refurbish existing brick making up parapets throughout the Syracuse VMAC. This will include removal of existing bricks to extents shown on associated drawings and removal associated angles and lintels, and any additional antennas, duct work and lightning arrest systems attached to the existing parapet. The existing roofing will be removed from the parapet as required and repaired, patched after the new parapet is installed. Replacement of Parapet: The Contractor shall perform work to ensure the concrete roof slab is in condition to receive parapet and enclosure. This includes cutting back existing roofing removing all brick attachments and cleaning concrete to accept new parapets and steel enclosure. Install new brick and steel as directed by the plans and specifications to include required attachment and any associated plumbing, mechanical and electrical to complete the task. Cold weather masonry procedures should be used if contractors schedule shows concrete placement after September 30. This procurement is 100% set-aside for Service Disabled Veteran Owned Small Businesses'. The NAICS code is 238140. The small business standard is $15 M. The cost range is $500,000 to $1,000,000. Information regarding the one and only site visit scheduled will be stated in the Solicitation. A 20% Bid Bond must be submitted with the bid. Performance and Payment bonds will be required.

Rental of Commercial Shower Trailers

Department of the Navy, United States Marine Corps | Published June 24, 2015  -  Deadline June 26, 2015
cpvs

This is a combined synopsis/solicitation for Rental of Commercial Shower Trailers prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number M67861-15-T-0042 applies and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-82. This solicitation is a total small business set aside; the applicable NAICS code is 532120 and the size standard is $38.5 million. The Marine Forces Reserve (MFR) anticipates issuing a single Firm Fixed Price (FFP), commercial contract to a responsible vendor. However, the Government reserves the right to award without discussion. In addendum to FAR clause 52.212-2(a) Evaluation--Commercial Items, award shall be made to the Lowest Price Technically Acceptable (LPTA) offer. Line item 0001, Rental of shower trailer(s) in accordance with Statement of Work (SOW) herein and as per attached cleaning schedule. Vendor shall submit an itemized price breakdown with quote. Period of performance: 30JUN2015through 11JUL2015 (equipment shall be picked up on 11JUL2015). Delivery address: Reserve Training Center Syracuse, United States Marine Corps, 1099 East Molloy Road Syracuse, NY 13211. STATEMENT OF WORK: 1. Scope: The Contractor shall provide shower trailers for 130 Marines, at 1 stall per 15 Marines, at RTC Syracuse, 1099 East Molloy Road Syracuse, NY 13211. The service includes cleaning all shower stalls and a power source(s) to include refueling. The service will also include providing and refilling fresh water tanks and tanks for greywater removal. A greywater dump area will be provided. The schedule for refilling the tanks and refueling the power source is provided on the provided attachment (E Co Shower Schedule.XLS). 2. Movement: The minimum amount of movements shall be made to support this requirement. All movements to RTC Syracuse, New York shall occur prior to 0900 on the day the showers are to be installed. The Technical Point of Contact must verify that all showers have been placed in the proper positions prior to the vendor's departure. All movements RTC Syracuse, New York will take place after 1600 on the last day the showers are scheduled to be removed. 3. Cleaning: Showers delivered to RTC Syracuse will be cleaned on the dates specified on the provided attachment (E Co Shower Schedule.XLS) to include sanitizing stalls and fixtures, replenishing tanks, and fuel for the power source. Cleaning shall be between 1100 -1300. 4. Contracting Officer's Representative 4-1. Sgt Joresa Raquel Burnett, USMC has been appointed as the Contracting Officer's Representatives. A copy of her appointment, explaining their authority during contract performance shall be provided to the Contractor prior to the beginning of contract performance. 4-2. SSgt Eric Verbeke, USMC, has been appointed as the Technical Point of Contact (TPOC) on-site at RTC Syracuse, New York and may be reached at XXX-XXX-XXXX. 4-3. Base Access. The TPOC will escort the Contractor onto the base and to the destination for delivery, cleaning, and servicing of the portable showers. Once work is complete for that period, the TPOC will escort the Contractor back through the main gate. 5. Personnel 5-1. Contract Manager. The Contractor will provide a contract manager who will be responsible for the performance of work. The name of this person and an alternate, who will act for the manager when he/she is absent, will be provided, in writing to the Contracting Officer and Government Representative before contract award. Phone numbers will also be provided. 5-2. The contract manager or alternate will have full authority to act for the Contractor on all contract matters relating to the daily operation of this contract. 5-3. Employees: The Contractor will ensure that employees have current and valid certifications before starting work, including health certificates and drivers' licenses as required for the performance of assigned duties. Ensuring that all delivery drivers have the proper credentials to board RTC Syracuse, NY to include Drivers Licenses, Registration, and proper insurances on all vehicles is the responsibility of the vendor. 5-4. Contractor personnel will be required to perform work in the following location(s): Soccer Field at RTC Syracuse. 1.3.2.3. Contractor personnel will be required to perform work at the following times: 30 June 2015 through 11 July 2015. 1.3.2.4. Contractors shall adhere to all relevant safety guidance, including (but not limited to): (a) EM 385-1-1 - U.S. Army Corps of Engineers Safety and Health Requirements Manual (b) OPNAVINST 5100.23 (series), Navy Occupational Health and Safety Program Manual (c) MCO 5100.29 (series), Marine Corps Safety Program (d) MCO 5100.8, Marine Corps Occupational Safety and Health (OSH) Policy Order (e) NAVMC DIR 5100.8, MARCOR OSH Program Manual 1.3.2.4. The Contractor will immediately report accidents/injuries sustained during contract performance to the Contracting Officer's Representative. The Contracting Officer's Representative will then immediately report accidents/injuries sustained during contract performance to the Contracting Officer so that the Contracting Officer may report said accidents/injuries to responsible agency safety officials. 6. Quality Control. 6-1. The Contractor will establish and maintain a complete Quality Control (QC) Plan to assure the requirements of the contract are provided, as specified. One copy of the Contractor's Quality Control Plan will be provided to the Contracting Officer prior to the contract start date and in the future as changes occur in the QC Plan. 6-2. An on-site record of all inspections conducted by the Contractor including corrective action taken must be created and maintained by the Contractor. This documentation will be made available to the Government upon request during the term of the contract. 6-3. Inspection: Upon completion of each shower installation, movement, or servicing, the Contractor is required to contact the listed TPOC to allow him/her to inspect the showers before the Contractor departs from the area. 7. Contractor: The contractor shall provide a sufficient and well-trained work force to satisfactorily perform the services required by this contract. Contractors' employees shall either be a citizen of the United States or shall carry a valid US Immigration/Registration Card. It will be the contractor's responsibility to require such proof before each worker becomes an official employee of the contractor. Contractor's employees shall observe and comply with all installation rules and regulations applicable to contract personnel (including those applicable to the safe operation of equipment and vehicles). Copies of pertinent installation rules and regulations may be requested from the Contracting Officer prior to the contract start. 8. Specific Tasks 8.1 Schedule. The Contractor is required to deliver and pick up the showers on the dates annotated on the provided attachment (E Co Shower Schedue.XLS). The TPOC will be present to inspect every delivery and pick up. 8-2. RTC Syracuse •- On 30 June 2015 the contractor is required to deliver shower trailers for 130 Marines, at 1 stall per 15 Marines, and a power source(s) to include refuel to RTC Syracuse prior to 0900. •- On 11 July 2015 the contractor is required to pick up all shower trailers and power source(s) from RTC Syracuse after 1600. •- All showers at RTC Syracuse should be serviced as requested on the provided attachment (E Co Shower Schedule.XLS). 8-4. Clarification of Support •- For purposes of simplicity and to clarify the complex nature of this requirement; the contractor is required to deliver any showers the day annotated on the E Co Shower Schedule. The contractor is required to remove any showers the day annotated on the E Co Shower Schedule. All showers at RTC Syracuse should be serviced as requested on the provided attachment (E Co Shower Schedule.XLS). 9. Contract Administration After award, all inquiries and correspondence relative to administration of this contract shall be directed to the Contracting Officer at the address shown in Block 9 of the SF 1449. YOU ARE HEREBY NOTIFIED THAT NO ONE OTHER THAN A UNITED STATES MARINE CORPS MARINE FORCES RESERVE CONTRACTING OFFICER HAS THE AUTHORITY TO DIRECT YOU IN ANY WAY TO ALTER YOUR OBLIGATION OR CHANGE THE STATEMENT OF WORK IN YOUR CONTRACT. FURTHER, IF THE MARINE CORPS, DOES DESIRE TO ALTER YOUR CONTRACT OR TO CHANGE THE CONTRACT STATEMENT OF WORK, CHANGES WILL BE ISSUED IN WRITING AND SIGNED BY THE CONTRACTING OFFICER. YOU SHOULD TAKE NO ACTION ON ANY CHANGE UNLESS, AND UNTIL, YOU RECEIVE SUCH A CHANGE FROM THE CONTRACTING OFFICER. 10. Manpower Reporting Pursuant to NMCARS 5237.102(90), the contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil. Specifications Each Field Shower Trailer shall include: light fixtures (rated for wet locations), air conditioning, exhaust fans, electric wall heaters, water tanks shall provide at least 2000 gallons of water per day and Storage Tanks / Containers capable of capturing at least 2000 gallons of grey water per day. Please provide generators and fuel to support the power function of the Field Shower Trailers. Each shower area shall include: clothing hooks and trash receptacles (contractor required to empty). Each showers stall shall include: shower head, non-slip floor, floor drains and curtains. The following clauses and provisions apply: CLAUSES INCORPORATED BY REFERENCE 52.204-2 Security Requirements AUG 1996 52.204-7 System for Award Management JUL 2013 52.204-13 System for Award Management Maintenance JUL 2013 52.204-16 Commercial and Government Entity Code Reporting NOV 2014 52.204-18 Commercial and Government Entity Code Maintenance NOV 2014 52.204-19 Incorporation by Reference of Representations and Certifications. DEC 2014 52.212-1 Instructions to Offerors--Commercial Items APR 2014 52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.237-2 Protection Of Government Buildings, Equipment, And Vegetation APR 1984 52.247-34 F.O.B. Destination NOV 1991 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7005 Oral Attestation of Security Responsibilities NOV 2001 252.204-7012 Safeguarding of Unclassified Controlled Technical Information NOV 2013 252.204-7015 Disclosure of Information to Litigation Support Contractors FEB 2014 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel JUN 2013 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Transportation of Supplies by Sea APR 2014 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (MAR 2015) ALTERNATE I (OCT 2014) The following Clauses are included in FAR PART 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2015) : •· 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note). •· 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug, 2013) (31 U.S.C. 6101 note). •· 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). •· 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). •· 52.222-3, Convict Labor (June 2003) (E.O. 11755). •· 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2014) (E.O. 3126). •· 52.222-21, Prohibition of Segregated Facilities (Apr 2015). •· 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). •· 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793). •· 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). •· 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). •· 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). •· 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). •· 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. •· 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984) 252.203-7998 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS-REPRESENTATION (DEVIATION 2015-O0010) (FEB 2015) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2015-O0010)(FEB 2015) 252.204-7004 ALTERNATE A, SYSTEM FOR AWARD MANAGEMENT (FEB 2014) 252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE (SEP 2011) 252.209-7992 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW-FISCAL YEAR 2015 APPROPRIATIONS (DEVIATION 2015-OO0005) (DEC 2014) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

J--SYRACUSE VAMC AUTOMATED DOOR PM

Department of Veterans Affairs, Canandaigua VAMC | Published August 14, 2015  -  Deadline September 3, 2015
cpvs

If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the Contracting Officer to determine if the product is acceptable. The Contracting Officer, in concert with the Contracting Officer's Representative (COR), will accept or reject the product. WORKMEN'S COMPENSATION The Contractor agrees to procure and maintain while the contract is in effect, Workmen's Compensation and Employers Public Liability Insurance in accordance with the laws of the State of New York. The policy shall provide coverage for Public Liability Limits of not less than the statutory limitation for any one accident, and at least meeting the statutory limitation, if more than one person is involved. EVIDENCE OF COVERAGE Before commencing work under the contract, the Contractor shall furnish to the Contracting Officer a certificate of insurance indicating the coverage outlined and containing an endorsement to the effect that cancellation of, or any material change in the policies which adversely affect the interests of the Government in such insurance shall not be effective unless a 30-day advance written notice of cancellation or change is furnished the Contracting Officer. In lieu of the insurance coverage required, the Contractor may furnish evidence of financial responsibility in the form of a qualified self-insurance program, an irrevocable letter of credit, or a letter in which the Contractor agrees to accept financial responsibility and further stated that he/she is financially able to meet all claims up to the amount specified. The furnishing of such evidence of insurance coverage or financial responsibility MAY NOT be waived. SAFETY REQUIREMENTS In the performance of this contract, the Contractor shall take such safety precautions as the Contracting Officer or his/her designee may determine to be reasonably necessary to protect the lives and health of occupants of the building. The Contracting Officer or his/her designee will notify the contractor of any noncompliance with the foregoing provisions and the action to be taken. The Contractor shall, after receipt of such notice, immediately correct the conditions to which attention has been directed. Such notice, when served on the Contractor or his/her representative at the site of the work, shall be deemed sufficient for the purpose aforesaid. If the Contractor fails or refuses to comply promptly, the Contracting Officer may issue an order stopping all and any part of the work, and hold the Contractor in default. PRICES/COSTS OF SCHEDULE OF SUPPLIES/SERVICES DESCRIPTION QUANTITY UNIT YEARLY PRICE Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Base Period of Performance of October 1, 2015 through September 30, 2016. 1 Base Period $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 1 Period of Performance October 1, 2016 through September 30, 2017. 1 Option Year 1 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 2 Period of Performance October 1, 2017 through September 30, 2018. 1 Option Year 2 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 3 Period of Performance October 1, 2018 through September 30, 2019. 1 Option Year 3 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 4 Period of Performance October 1, 2019 through September 30, 2020. 1 Option Year 4 $_______ Total Aggregate Amt. -Base plus four Option Years. -- -- $_______ PRICES/COSTS OF SCHEDULE OF SUPPLIES/SERVICES DESCRIPTION QUANTITY UNIT YEARLY PRICE Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Base Period of Performance of October 1, 2015 through September 30, 2016. 1 Base Period $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 1 Period of Performance October 1, 2016 through September 30, 2017. 1 Option Year 1 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 2 Period of Performance October 1, 2017 through September 30, 2018. 1 Option Year 2 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 3 Period of Performance October 1, 2018 through September 30, 2019. 1 Option Year 3 $_______ Provide price to furnish all parts and labor to provide two (2) preventive maintenance inspections per year, plus all emergency repairs required for the automatic doors located at the Syracuse VA Medical Center. For Option Year 4 Period of Performance October 1, 2019 through September 30, 2020. 1 Option Year 4 $_______ Total Aggregate Amt. -Base plus four Option Years. -- -- $_______ WD 05-2383 (Rev.-17) was first posted on www.wdol.gov on 07/14/2015 ************************************************************************************ REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2383 Daniel W. Simms Division of | Revision No.: 17 Director Wage Determinations| Date Of Revision: 07/08/2015 _______________________________________|____________________________________________ Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts. ____________________________________________________________________________________ State: New York Area: New York Counties of Broome, Cayuga, Chemung, Chenango, Cortland, Hamilton, Herkimer, Madison, Oneida, Onondaga, Oswego, Otsego, Tioga, Tompkins ____________________________________________________________________________________ **Fringe Benefits Required Follow the Occupational Listing** OCCUPATION CODE - TITLE FOOTNOTE RATE 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.82 23021 - Aircraft Mechanic I 24.88 23022 - Aircraft Mechanic II 25.82 23023 - Aircraft Mechanic III 26.88 23040 - Aircraft Mechanic Helper 19.11 23050 - Aircraft, Painter 22.56 23060 - Aircraft Servicer 21.64 23080 - Aircraft Worker 22.46 23110 - Appliance Mechanic 18.24 23120 - Bicycle Repairer 14.34 23125 - Cable Splicer 29.40 23130 - Carpenter, Maintenance 19.98 23140 - Carpet Layer 19.67 23160 - Electrician, Maintenance 23.73 23181 - Electronics Technician Maintenance I 21.84 23182 - Electronics Technician Maintenance II 23.49 23183 - Electronics Technician Maintenance III 24.58 23260 - Fabric Worker 18.65 23290 - Fire Alarm System Mechanic 20.85 23310 - Fire Extinguisher Repairer 17.73 23311 - Fuel Distribution System Mechanic 28.12 23312 - Fuel Distribution System Operator 23.24 23370 - General Maintenance Worker 16.05 23380 - Ground Support Equipment Mechanic 24.88 23381 - Ground Support Equipment Servicer 20.62 23382 - Ground Support Equipment Worker 21.69 23391 - Gunsmith I 17.73 23392 - Gunsmith II 19.83 23393 - Gunsmith III 21.23 23410 - Heating, Ventilation And Air-Conditioning 19.43 Mechanic 23411 - Heating, Ventilation And Air Contditioning 20.16 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 19.24 23440 - Heavy Equipment Operator 24.79 23460 - Instrument Mechanic 21.23 23465 - Laboratory/Shelter Mechanic 20.57 23470 - Laborer 11.58 23510 - Locksmith 20.37 23530 - Machinery Maintenance Mechanic 20.06 23550 - Machinist, Maintenance 17.18 23580 - Maintenance Trades Helper 15.63 23591 - Metrology Technician I 21.23 23592 - Metrology Technician II 22.08 23593 - Metrology Technician III 22.84 23640 - Millwright 20.70 23710 - Office Appliance Repairer 20.09 23760 - Painter, Maintenance 18.10 23790 - Pipefitter, Maintenance 27.88 23810 - Plumber, Maintenance 21.26 23820 - Pneudraulic Systems Mechanic 21.23 23850 - Rigger 21.23 23870 - Scale Mechanic 20.82 23890 - Sheet-Metal Worker, Maintenance 20.85 23910 - Small Engine Mechanic 19.26 23931 - Telecommunications Mechanic I 25.96 23932 - Telecommunications Mechanic II 26.86 23950 - Telephone Lineman 25.89 23960 - Welder, Combination, Maintenance 18.96 23965 - Well Driller 21.23 23970 - Woodcraft Worker 21.23 23980 - Woodworker 16.32 24000 - Personal Needs Occupations 24570 - Child Care Attendant 9.84 24580 - Child Care Center Clerk 12.27 24610 - Chore Aide 9.75 24620 - Family Readiness And Support Services 14.52 Coordinator 24630 - Homemaker 13.64 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.39 25040 - Sewage Plant Operator 18.54 25070 - Stationary Engineer 24.39 25190 - Ventilation Equipment Tender 18.72 25210 - Water Treatment Plant Operator 18.28 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.51 27007 - Baggage Inspector 13.35 27008 - Corrections Officer 21.94 27010 - Court Security Officer 21.74 27030 - Detection Dog Handler 16.29 27040 - Detention Officer 21.94 27070 - Firefighter 23.44 27101 - Guard I 13.35 27102 - Guard II 16.29 27131 - Police Officer I 22.40 27132 - Police Officer II 24.88 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 15.31 30022 - Archeological Technician II 17.07 30023 - Archeological Technician III 21.22 30030 - Cartographic Technician 23.74 30040 - Civil Engineering Technician 21.56 30061 - Drafter/CAD Operator I 16.43 30062 - Drafter/CAD Operator II 19.13 30063 - Drafter/CAD Operator III 21.29 30064 - Drafter/CAD Operator IV 25.23 30081 - Engineering Technician I 14.27 30082 - Engineering Technician II 16.02 30083 - Engineering Technician III 18.70 30084 - Engineering Technician IV 22.20 30085 - Engineering Technician V 27.16 30086 - Engineering Technician VI 32.86 30090 - Environmental Technician 19.67 30210 - Laboratory Technician 18.00 30240 - Mathematical Technician 23.49 30361 - Paralegal/Legal Assistant I 17.28 30362 - Paralegal/Legal Assistant II 21.92 30363 - Paralegal/Legal Assistant III 26.81 30364 - Paralegal/Legal Assistant IV 32.44 30390 - Photo-Optics Technician 23.49 30461 - Technical Writer I 21.13 30462 - Technical Writer II 25.85 30463 - Technical Writer III 31.27 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 10.64 31030 - Bus Driver 14.20 31043 - Driver Courier 12.21 31260 - Parking and Lot Attendant 9.46 31290 - Shuttle Bus Driver 13.14 31310 - Taxi Driver 10.00 31361 - Truckdriver, Light 13.14 31362 - Truckdriver, Medium 17.61 31363 - Truckdriver, Heavy 17.68 31364 - Truckdriver, Tractor-Trailer 17.68 99000 - Miscellaneous Occupations 99030 - Cashier 9.10 99050 - Desk Clerk 10.17 99095 - Embalmer 26.64 99251 - Laboratory Animal Caretaker I 10.66 99252 - Laboratory Animal Caretaker II 11.47 99310 - Mortician 27.29 99410 - Pest Controller 15.84 99510 - Photofinishing Worker 11.97 99710 - Recycling Laborer 14.91 99711 - Recycling Specialist 17.56 99730 - Refuse Collector 13.58 99810 - Sales Clerk 11.34 99820 - School Crossing Guard 9.90 99830 - Survey Party Chief 20.03 99831 - Surveying Aide 12.59 99832 - Surveying Technician 17.23 99840 - Vending Machine Attendant 14.59 99841 - Vending Machine Repairer 16.15 99842 - Vending Machine Repairer Helper 14.59 ____________________________________________________________________________________ ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS: HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, 4 weeks after 15 years, and 5 weeks after 25 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174) THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING: 1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination. Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of: (1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications; (2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications; (3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or (4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400). 2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work). HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges. A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs. The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol. gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/. REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form 1444 (SF 1444)} Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work. 3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4). 4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request. 5) The contracting officer transmits the Wage and Hour decision to the contractor. 6) The contractor informs the affected employees. Information required by the Regulations must be submitted on SF 1444 or bond paper. When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.
  • 1