Enefit Renewable Energy LLC Iru Power Plant (the power plant) waste-cleaning the internal surfaces of the work during the winter break in three years.
Enefit Renewable Power LLC Iru Representative challenges devices cleanups using techniques tööstusalpinismi. It has a high work without Scaffold and personal hoists and work environments may contain hazardous substances and elevated temperature conditions.
The goal is to fly ash / fly ash / (code 19 01 13 *) and flue gas cleaning residues / APC residue / (code 19 01 07 *) lõppkäitleja (hereinafter referred to as Supplier Handlers) finding with the provision of waste-transport service territory for three years.
The tender "Tõstamaa 35/10 kV substation 35 kV and 10 kV switchgear reconstruction and to compensate installation maaühendusvoolude" volume contains the following works: 1. Design work: 1.1. Structural part, including. territory design; 1.2. Switchyard building design; 1.3. Primary Design; 1.4. 35 kV and 10 kV switchgear design; 1.5. Maaühendusvoolude compensation design; 1.6. Secondary design; 1.7. Automatic fire and security alarm systems engineering; 1.8. Backup power (battery) design for mechanics and communications equipment. 2. Construction and installation work Substation: 2.1. Switchyard building construction; 2.2. Service road construction, maintenance work; 2.3. Maandusomatarbetrafo installation; 2.4. Installing the bobbin arc; 2.5. Existing transformer repair; 2.6. Linking an existing transformer new distribution device; 2.7. 10 kV switchgear installation; 2.8. 35 kV switchgear installation; 2.9. The new mast with a switching apparatus, 35 kV metal framework tower cleaning and painting; 2.10. All outgoing 35 kV and 10 kV feeder cable lines with the construction of the installation of the cable sleeves and tying the electricity grid; 2.11. Grounding and lightning protection works; 2.12. The reserve supply of equipment. 3. Secondary Installation and setup work. 4. dismantling 4.1. The old 10 kV and 35 kV switchgear demolition, in the disposal, and the dismantling of deposit.
The tender is divided into parts (Part 1 and Part 4): 1.1 Part 1 - Kallaste, Tartu land, Jõgeva line corridor maintenance area; 1.2 Part 2 - Paide, Järva-Jaani line corridor maintenance area; 1.3 Part 3 - Roela, Kill and Little Mary along the corridor service area; 1.4 Part 4 - Võru along the corridor service area; Maintenance Contract map regions are at the tender documents, a file named "regional line corridor maintenance card". EXERCISING work within the successful tenderer undertakes to do the following: 2.1, line maintenance work according to the Republic of Estonia, the current legislation and requirements established by the contracting authority. Cutting waste valleys assembly line onto the field edges or cleaning. 2.3 The owner of the immovable Electricity Distribution LLC Form (Landowner notification letter format) for information regarding the work of the exercise and the owner of the immovable special requirements, coordination of cross cutting felled trees, and the collection and handling of logging residues; Getting forest notifications required for the work; 2.5 felled timber to the owner of an immovable or the use of the property to the person entitled failure, unless the property owner or the person entitled to use the property agrees otherwise in writing by the contractor. Company contract shall take effect on the contract. The work is paid for by the contracting authority in accordance with the unit prices of the transmitted orders. The contract is concluded for three years the right to extend the contract of the contracting twice in one year (3 + 1 + 1). If the supplier has submitted a tender with the lowest total cost of more than two participating in the tender, the contracting authority has the right to choose which parts of it according to the contract provider to conclude, on the basis of all the parts of the tender bids the lowest total cost of the whole.