Public tenders for chemical in Canada

Find all Chemical tenders in the world.
Finding business opportunities has never been easier.

Results for chemical. Make a new search!
ChemicalCanada

Laboratory Analysis Services

Public Works and Government Services Canada | Published December 1, 2017  -  Deadline January 15, 2018
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:    Laboratory Analysis Services  Supply, from time to time as required, physico-chemical and microbiological analysis services (analysis) on behalf of Public Works and Government Services (PWGSC) Quebec Region's Environmental Services.  The Analysis are required for the Quebec Region and will be used to assist the Project Authorities for whom work is carried out.   The required services are:  1.Analyse samples in accordance with the parameters listed in Annex B and/or C - Basis of Payment, store samples as per applicable standards (freezing for soil and sediment) and provide certificates of analysis.  2.Provide containers suitable for sampling, including coolers.  3.Compare, at all time, analysis results with the criteria or standards corresponding to the sampled matrices (sediment, soil, water, residual material) and present them, on request, in an interpretive report.  4.Compare, at all times, the drinking water analysis results with appropriate criteria or recommendations.   5.Upload, at all times, the drinking water analysis results to a website in a predetermined data format.  6.Provide sampling services on request and submit a sampling report.  The department (client) the services shall be provided to is: Public Works and Government Services (PWGSC)    Quebec Offices 1550 Avenue of Estimauville Quebec City, Quebec G1J 0C7  Montreal Offices 800 de la Gauchetière West 7300 Office Montreal, Quebec H5A 1L6  Offerors may submit an offer for each area, namely Sediment AND/OR Soil, Water, Drinking Water, and Residual Material.  The Offeror's main laboratory shall undertake internally, in its own facilities (no subcontracting), at least seventy (70) percent (70%) of analysis for the Sediment, Soil, Water, Drinking Water, Residual Material parameters identified in Basis of Payment.  Canada may issue up to five (5) standing offers for provision of the services from February 1, 2018, to January 31, 2021 inclusive.  The allowed budget of $2,000,000 (taxes excluded) is for a period of three (3) years firm and will be shared among all standing offers issued.  This requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA), the World Trade Organization Agreement on Government Procurement (WTO-AGP) and the Canadian Free Trade Agreement (CFTA).   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Automated Tissue Processor

Public Health Agency of Canada | Published December 1, 2017  -  Deadline December 18, 2017
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Leica Microsystems (Canada) Inc. 71 Four Valley Drive Concord Ontario Canada L4K4V8 Nature of Requirements:   Automated Tissue Processor  6D063-173630/A Omerzo, Zeljka Telephone No. - (204) 510-2597 (    ) Fax No. - (204) 983-7796 (    )   1. Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement   The Prion Diseases Section, within the National Microbiology Laboratory (NML), performs histological activities for their own research, and provides a collaborative core pathology service to other NML researchers as well as external collaborators on government-funded initiatives. Histopathology is an essential part of establishing and studying animal models of infection, which are core components of the Prion Diseases section and the Special Pathogens program areas and are in support of Public Health Agency of Canada (PHAC) mandate to provide leadership on health promotion and disease prevention.  An essential component of being able to deliver histopathological services at the NML is the capability of being able to process a large number of samples quickly and in a safe manner.  NML currently has all of their histology lab equipment set up in an area that is shared with another section in their Division. Therefore space is very limited and fumes generated from historical processing need to be mitigated to ensure air quality safety for employees in close proximity to the instrument.   National Microbiology Laboratory has a requirement for a new model of tissue processor which has a smaller footprint, is more proficient and incorporates substantial safety features over the existing processor.   SECURITY REQUIREMENT There is a security requirement associated with this requirement.  3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)  Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following requirements:  1. Must be a free standing floor unit model that is compact in size, being no larger than 24" wide and no more than 28" deep and 55" high to fit into the extremely limited space available in the laboratory;  2. The processor must contain reagent bottles that are compact, being no larger than 4L in size such that they can be easily filled and lifted by the user;  3. The reagent bottles must be located in the front of the instrument only, so that they can be easily accessed without having to move the instrument (as in the case of accessing bottles in the rear of a machine). This is for the safety of handling of toxic chemicals, to prevent accidental spill of toxic chemicals due to the lifting of heavy and cumbersome bottles, and also to prevent physical injury to the user as a result of having to lift heavy bottles or by having to move the heavy instrument to access the back of the machine when reagents need to be replenished;  4. The equipment must be on castors and weigh no more than 200 kg when the unit is full of reagents and cassettes, to be able to accommodate changes in lab configuration when space restraints require re-configuration of equipment;  5. The unit must be completely self-enclosed with an exhaust carbon filter and multi-chemical fume extraction at the retort lid to isolate the toxic fumes generated from formaldehyde, xylene and alcohols for safety reasons as this limits employee exposure to harmful chemicals;  6. Must have a minimum 150 slide capacity;  7. Must  have an advanced reagents management system that monitors all reagents including formalin, alcohol, xylene and paraffin wax for optimizing experimental conditions, improving specimen quality, and optimizing laboratory economy;  8. Must have a chemical resistant, colour LED touchscreen.  4. Applicability of the trade agreement(s) to the procurement  This procurement is subject to the following trade agreement(s)   Canadian Free Trade Agreement (CFTA)  North American Free Trade Agreement (NAFTA)  5. Justification for the Pre-Identified Supplier  Leica PEARL Automated Tissue Processor is the only known instrument meeting all specifications essential to the requirement as listed above.  6. Government Contracts Regulations Exception(s)  The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - only one person is capable of performing the contract.  7. Exclusions and/or Limited Tendering Reasons  The following exclusion(s) and/or limited tendering reasons are invoked under the:  Canadian Free Trade Agreement (CFTA)  Article 506 - 12 (a) to ensure compatibility with existing products, to recognize exclusive rights, such as exclusive licences, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative; Article 506 - 12 (b) where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exist.  North American Free Trade Agreement (NAFTA) - Article 1016 - 2(b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists.  8. Period of the proposed contract or delivery date  The equipment must be delivered on or before March 31, 2018.  9. Name and address of the pre-identified supplier  Leica Microsystems Canada 71 Four Valley Drive Concord, Ontario L4K 4V8  10. Suppliers' right to submit a statement of capabilities  Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  11. Closing date for a submission of a statement of capabilities  The closing date and time for accepting statements of capabilities is December 18, 2017.  12. Inquiries and submission of statements of capabilities  Inquiries and statements of capabilities are to be directed to:  Zeljka Omerzo Procurement Officer Procurement Branch  Public Works and Government Services Canada Suite 100-167 Lombard Avenue Winnipeg, MB R3B 0T6  Telephone:  (204) 510-2597 Facsimile:  (204) 983-7796 E-mail address: Zeljka.Omerzo@pwgsc-tpsgc.gc.ca  Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Precipitation Gauge Antifreeze

Environment Canada | Published November 30, 2017  -  Deadline October 1, 2018
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   Precipitation Gauge Antifreeze  K3D33-180289/A Carriere, Nancy Telephone No. - (613) 545-8764  Fax No. - (613) 545-8067   The Meteorological Service (MSC) requires the supply and delivery of chemical mixes of 1, 2 Propylene Glycol with Methyl Alcohol in 4.0 litre jugs/bottles on an as and when requested basis  to specific locations across Canada as per Annex A, Requirement attached hereto.  It is the intention of Canada to issue one (1) National Individual Standing Offer for this requirement.  The resulting Standing Offer will be from issuance to 31 March 2021 with the irrevocable option to extend the term of the Standing Offer by up to two (2) additional one (1) year periods.   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Glass Coverslipper

Canadian Food Inspection Agency | Published November 30, 2017  -  Deadline November 1, 2018
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   Glass Coverslipper  39903-180774/A Hall, Marlene Telephone No. - (204) 230-0147  Fax No. - (204) 983-7796   Line 1, Glass Coverslipper  The Canadian Food Inspection Agency (CFIA) has a requirement for the supply and delivery of 1 (one) Glass Coverslipper .At the National Center for Foreign Animal Diseases in Winnipeg, the Pathology department plays a key role in the diagnosis and research of Foreign Animal Disease. The stained slides require a chemical treatment in order for them to be removed from the containment lab to be photomicrographed. We have to re-coverslip these slides with glass coverslips, as slides with film coverslips have a tendency to fad over time.  It is mandatory that Bidders demonstrate compliance with the mandatory performance specifications outlined below in the Compliance Matrix.   FOB Destination: Canadian Food Inspection Agency, Winnipeg, Manitoba,  Canada  The requirement is subject to the provisions of the North American Free Trade Agreement (NAFTA) and the Canadian Free Trade Agreement (CFTA).  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Chemical Analysis Instruments

Environment Canada | Published November 29, 2017
Winner
Avensys Inc.
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Source List Contract Award Procedure (Procurement Strategy): Exclusive Rights GSIN Description:  Chemical Analysis Instruments Quantity: 1

Portable Photosynthesis System

Agriculture and Agri-Food Canada | Published November 29, 2017
Winner
LI-COR, Inc.
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Exclusive Rights GSIN Description:  Chemical Analysis Instruments Quantity: 1

Annual Chemical Fume Hood Verification and Biological Safety Cabinet Certification

Health Canada | Published November 28, 2017  -  Deadline October 1, 2018
cpvs

The National Capital Real Property Division (NCRPD) of Health Canada requires services to verify its chemical fume hoods. All verifications are to be carried out in accordance with the CSA Z316.5-15 Fume Hoods and Associated Exhaust Systems standard, which includes ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods.

NCRPD also intends to certify it's Biological Safety Cabinets at Health Canada laboratories in the NCR in accordance with NSF/ANSI 49-2014 Biosafety Cabinetry: Design, Construction, Performance, and Field Certification -Annex F.

Health Canada will only accept a testing procedure that can be reproduced, and follows the methodology set forth in the standard.

The type of equipment that will be used as well as the procedure will be a requirement of the resulting contract. This information is to be included in the Bidder's Proposal.

CON-TEST has had the contract since September 2013.

Gas Chromatograph - Direct Deposition Condensed Phase Fourier Transform Infrared Detector

Canada Border Services Agency | Published November 27, 2017  -  Deadline December 12, 2017
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  Spectra Analysis, Inc. 257 Simarano Drive Marlboro Massachusetts United States 01752 Nature of Requirements:   Gas Chromatograph - Direct Deposition Condensed Phase Fourier Transform Infrared Detector  47419-188645/A Shannahan, Cassandra Telephone No. - (819) 420-1068 (    )  1. Advance Contract Award Notice (ACAN)   An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement   The Science and Engineering Directorate (SED) of the Canada Border Services Agency (CBSA) has a requirement for the supply of a Gas Chromatograph - Direct Deposition Condensed Phase Fourier Transform Infrared Detector (GC-IRD) for the analysis of suspected contraband samples. The system must be an integrated system controlled by a single computer. The system must consist of a Gas Chromatograph, a Direct Deposition Condensed Phase Fourier Transform Infrared Detector, an autosampler, a computer and all necessary interconnections and software. The Integrated DiscovIR-GC System from Dani Instruments Inc. is identified to meet all mandatory requirements.  3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)   Any interested supplier must demonstrate by way of a statement of capabilities that its system meets the following requirements:   The gas chromatograph must:  - Have an oven which is programmable from 10°C above ambient temperature to at least 450°C; with a maximum linear program rate of at least 15°C per minute;  - Have a split/splitless capillary injector that operates from ambient temperature to 400°C;  - Have electronic pressure/flow control (0-100 psi) that supports programming for constant flow and constant pressure; and  - Have an autosampler that holds a minimum of 72 vials.  The Direct Deposition Condensed Phase Fourier Transform Infrared Detector must:  - Deliver, enable and support interfacing with the GC system through a heated transfer line with temperature control from ambient to 350°C.;  - Operate by direct deposition of the GC column effluent on a cryogenically-cooled, infrared transparent disc;  - Collect condensed phase FT-IR spectra sampled by transmittance through both the disc and the deposited sample;  - Include a built-in liquid nitrogen cooled mercury-cadmium-telluride (MCT) detector;  - Have a spectral range of 4000-650 cm 1;  - Have a spectral resolution of 4 cm-1;  - Detect dodecane at a concentration of less than 200 pg;  - Provide disc temperature control from -70°C to 50°C; and  - Deliver, enable and support unattended operation of at least 12 hours.  Software and Instrument control specifications are as follows:  - The entire system must be fully controlled from a single computer (PC) using a single integrated software package for routine operation, including setting up and running a sequence and real-time data collection;  - The instrument is to be operated using vendor-supplied software on a vendor-supplied standard IBM-compatible PC computer;   - The software must operate under Microsoft Windows;  - The software must deliver, enable and support real-time and post-GC-run data collection to increase signal to noise;  - The software must deliver, enable and support extracting, viewing and saving averaged, background-corrected IR spectra for GC peaks and at any point in the GC run;  - The software must deliver, enable and support producing band chromatograms for chemical classes;  - The software must deliver, enable and support producing ratio chromatograms for profiling trends;  - The software must deliver, enable and support producing, creating and searching IR spectral libraries; and  - The software must include alignment and tuning tools.  4. Applicability of the trade agreement(s) to the procurement   This procurement is subject to the following trade agreements:   - Canadian Free Trade Agreement (CFTA) - World Trade Organization - Agreement on Government Procurement (WTO-AGP) - North American Free Trade Agreement (NAFTA)  5. Justification for the Pre-Identified Supplier  Dani Instruments Inc. is the only supplier that can supply a system meeting all the technical requirements and has the exclusive rights for the Integrated DiscovIR-GC System.  6. Government Contracts Regulations Exceptions   The following exception(s) to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - only one company is capable of performing the work.  7. Exclusions and/or Limited Tendering Reasons   - Canadian Free Trade Agreement (CFTA) - Article 513.1(iii) - World Trade Organization - Agreement on Government Procurement (WTO-AGP) - Article XV.1(b) - North American Free Trade Agreement (NAFTA) - Article 1016.2(b)  8. Period of the proposed contract or delivery date   The system must be delivered on or before March 30, 2018.  9. Name and address of the pre-identified supplier   Dani Instruments Inc. 257 Simarano Drive Marlboro, ME 01752 USA   10. Suppliers' right to submit a statement of capabilities   Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  11. Closing date for a submission of a statement of capabilities   The closing date and time for accepting statements of capabilities is December 12, 2017 at 2:00 EST.  12. Inquiries and submission of statements of capabilities   Inquiries and statements of capabilities are to be directed to:   Cassandra Shannahan Public Services and Procurement Canada Commercial and Consumer Products Directorate 11 Laurier Street, 6A2, Phase III Place du Portage, Gatineau, Québec, K1A 0S5  Telephone: (819) 420-1068 Facsimile: (819) 956-3814 E-mail address: cassandra.shannahan@pwgsc-tpsgc.gc.ca   Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

inverted fluorescent microscope

Department of National Defence | Published November 24, 2017  -  Deadline August 1, 2018
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   inverted fluorescent microscope  W0114-185526/A Weaver, Tammy Telephone No. - (613) 484-1809 (    ) Fax No. - (613) 545-8067 (    )  This requirement is to purchase an inverted fluorescent microscope for a cellular molecular laboratory to allow for the visualization and tracking of biological material that includes RNA, proteins, and cells (including sperm cells). The inverted microscope must be equipped for phase contrast, polarized light, and fluorescence and include a camera, dual channel digital microinjection system, and a pipette puller. It must be able to measure, track in real-time, track with movie, and image live sperm motility. Most importantly, the microscope should be compatible with the existing Nikon microscopes (camera system DS-Fi2 and SMZ-18 microscope) in the Chemistry and Chemical Engineering Department at Royal Military College of Canada so that objectives, filters, and cameras can be shared across platforms to allow for a broader range of use for many research groups at RMC. Since there will be many users, the microscope should have functionality to gather data from automated internal sensors and guide the user through the appropriate methodology.  Qty: 1  All the deliverables must be received on or before 01 March 2018.  Training is to be completed no later than 29 March 2018.      Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Identification Device, Edmonton, Ablerta

Royal Canadian Mounted Police | Published November 23, 2017  -  Deadline August 12, 2017
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:  RIGAKU/MSC, INC. Rigaku Americas Corporation 9009 New Trails Drive Woodlands Texas United States 77361 Nature of Requirements:   Identification Device, Edmonton, Aberta  1. Advance Contract Award Notice (ACAN)   An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement   The Royal Canadian Mounted Police (RCMP) has a requirement for the supply and installation of one benchtop/portable X-ray diffraction (XRD) instrument system for the analysis of samples encountered in forensic casework in Edmonton, Alberta.  3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)   Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following requirements:   Dimensions/Weight: Must be no more than 47 cm (or 18.5 inches) deep with an overall width and height no more than 55 cm (or 21.6 inches) x 71 cm (or 27.9 inches); the unit (excluding chiller) must weigh no more than 81 kg (or 176.4 lbs).  Power: Must connect directly to 115 V, Single Phase, 60 Hz, 10 A power service.  Radiation Enclosure: Must have a self-contained radiation enclosure with fail-safe interlocks and shutter mechanism that meets all local and federal radiation safety regulations.  X-ray Generator: Must have a minimum of 600 W power with voltage up to 40 kV and current up to 15 mA for maximum excitation of sample.  X-ray Tube: Cu target x-ray tube must be included (2.0 kW, Cu, normal focus). User must be able to easily change x-ray tubes and perform alignment without a vendor service call and without returning XRD to vendor facility.  Goniometer: Must have a vertical goniometer with horizontal sample mount.  Goniometer Range: Must be -3° to +145° 2? (2-theta) minimum.  Goniometer Accuracy: Must be better than 0.02° 2? on NIST SRM 1976, Alumina Plate (Corundum).  Slits: Must include slit assembly including a theta-compensating divergence slit mechanism to keep the irradiated area constant over the full goniometer range, fixed divergence slit, scatter slit, 5 degree incident/receiving Soller slits for high intensity, and receiving slit assemblies.  Sample Stage: The standard sample stage must allow for different sample sizes and shapes that do not fit into a regular sample holder.  The sample stage must be able to accommodate samples up to 25 mm in thickness (height) with dimensions up to 120 mm  x 110 mm (width x length).  Sample Changer: System must include an automatic sample changer that can accommodate at least six (6) different samples (i.e. 6 position sample changer).  At least 12 sample holders for bulk and powder samples, that fit the automatic sample changer, must be included.  The automatic sample changer must be capable of spinning the sample (to average out crystal orientations) during measurement.  Microsampling: System must include an automatic sample changer that can accommodate at least six (6) different powdered microsamples for analysis via spinning capillary (1 mm or less) x-ray powder diffraction. A set of at least 50 capillaries for use in x-ray powder diffraction analysis must also be supplied.  Filter: Must have a Ni K-beta filter for Cu radiation.  Monochromator: Must have a graphite diffracted beam monochromator for use with Cu radiation and scintillation counter detector to maximize peak-to-background ratio and allow high energy resolution suppression of fluorescence x-rays from samples containing Fe to ?E = 230 eV (i.e. for analysis of samples unsuitable for  analysis with a high speed detector).  Detectors: 1) Must have a NaI scintillation counter detector. 2) Must have a high speed 1D silicon strip detector with minimum active area of 256 mm2 and a minimum count rate of 1 x 106 cps/pixel (i.e., 1,000,000 cps/pixel).  The high speed detector must come with a variable knife-edge collimator that will automatically adjust its position to provide optimum low angle background suppression with higher intensity at high angles. User must be able to easily switch between detector type as needed.  Computer: An external computer must be provided to allow superior computing power for advanced XRD analysis while being easy to exchange with standard computer hardware, easy upgrades with Windows operating systems and compatible hardware/software without proprietary equipment, and easily repair or replace computer and peripherals as needed.    Minimum specs of computer to be provided are: Intel CoreTM i7 Processor 8.0 GB SDRAM Internal Audio Speaker 24" computer monitor Dual Monitor Capability 2x 500 GB hard drive, RAID 1 mirror 8X DVD+/-RW, 9.5 Optical Disk Drive 6 USB Ports, 4 on back, 2 on front 4 USB Ports (USB 3.0 compatible), 2 front/2 rear Keyboard, USB 2 button scroll mouse and pad Microsoft Windows 7 (preferred by customer for network compatibility) Microsoft Office 2010 Business Adobe Acrobat Standard DC Two (2) Ethernet Ports required 3 year Basic Limited Warranty, 3 year NBD On-Site Service from Dell  RCMP will supply own colour printer. (This will minimize long term cost by allowing a printer that uses the same print cartridges as all other printers in the facility.)  Chiller: The chiller must be an external closed loop air-cooled heat exchanger that may be remotely located up to 4.5 m from the XRD to minimize fan noise and heat from the instrument work area.  The internal reservoir tank must use only purified water without the need for chemical coolants and without the need for connection to an external water supply.  The chiller must produce a background noise no greater than 50 decibels (dB) at the XRD when the chiller is located within 30 cm of the XRD system, and no greater than 25 dB at the XRD location when the chiller is located 4.5 m from the XRD instrument.  The chiller must connect directly to a 115 V, Single Phase, 60 Hz,15 A (or less) power service.  Software: Instrument control and data collection software must be included. All software must be capable of full featured powder diffraction analysis and general XRD data analysis for the analysis of collected diffraction patterns and have a variety of display tools and functions, automatic data reduction of background removal, Ka2 stripping, peak top and second derivative peak finding, beam footprint and absorption corrections for variable slits and monochromators, Reference Intensity Ratio (RIR) quantitative analysis using imported phase, Automatic data reduction (including background removal) and peak list reporting, Sonneveld-Visser and polynomial function background elimination, Rachinger method Ka2 elimination, automatic and/or manual peak finding, peak-top and second-derivative peak finding, Gaussian moving average, Savitzky-Golay, optimized Gaussian moving average, and B-spline smoothing, and automatic report generation in MicroSoft Word.  Search/match software module for qualitative phase identification must be able to use, and be compatible with, COD, ICDD PDF-2 and PDF-4, and ICSD databases using a hybrid line and profile search algorithm with chemistry filters (purchaser will supply ICDD PDF-2 and PDF-4 databases). A minimum of six (6) user licenses for data analysis software must be included to allow for up to six (6) computers for simultaneous off-line data analysis. Vendor must supply software upgrades free of charge for a full year after installation.   Inorganic Crystal Structure Database (ICSD) perpetual license (not required to be renewed annually) database, latest release, single license, must be included.     Crystallography Open Database (COD) to be included.  Installation:  Installation must be completed by vendor employed service technician (not 3rd party) and must comply with Canadian Standards Association (CSA) codes and standards.  Training: A minimum of two (2) days on-site training must be provided for up to six (6) people within 90 days of installation. Training must be simultaneous (i.e. up to six people will be trained during one training session by a factory applications scientist). Training must include how to change detectors, how to power up and down the instrument, how to load and collect data from different samples, including how to run the automatic sample changer, how to use the instrument software to collect and process data, and how to search/match diffraction data for qualitative phase identification using the COD, ICDD PDF-2 and/or PDF-4 databases.  Mobility: Removable handles must be included to allow the user to attach handles on each side of the enclosure cabinet to easily pick up and move the system from the benchtop to mobile cart or to place in shipping crate.   System Warranty: Must include a minimum of one (1) year warranty on the entire XRD system, including chiller and computer software, will be included. Warranty will cover all parts and labour, including all travel costs.  Service Contract: An additional one (1) year service contract providing coverage for the 12 months after the one year warranty period has expired must be included.  The service contract must be for on-site service (72 hour on-site response) and cover all parts and labour, including all travel costs and one (1) Preventive Maintenance with Technical Telephone Support during business hours, 8 am to 5 pm, Monday through Friday CST (service contract does not cover peripheral equipment such as x-ray tubes, sample holders and standalone computer).  4. Applicability of the trade agreement(s) to the procurement   This procurement is subject to the following trade agreement(s): o Canadian Free Trade Agreement (CFTA) o North American Free Trade Agreement (NAFTA)  5. Justification for the Pre-Identified Supplier   Rigaku Americas Corporation is the only manufacturer that can provide a portable benchtop x-ray diffraction (XRD) system that has the capability to analyze different sample types (/formats), including : single large bulk, multiple smaller bulk automatically and multiple micro automatically.  There are two modes of analysis: (a) bulk sample and (b) capillary (micro).  For (a), the bulk analysis must have two modes: large single sample and smaller samples (e.g., size of a quarter).  For the bulk sample size, the instrument must allow the analysis of single samples up to 25 x 120 x 110 mm (H x W x L).  The system must also have an automatic sample changer for analysis of smaller bulk samples (ref. size of a quarter).  Micro samples, analyzed via capillary, must also have an automatic sample changer.  6. Government Contracts Regulations Exception(s)   The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work".  7. Exclusions and/or Limited Tendering Reasons   The following exclusion(s) and/or limited tendering reasons are invoked under the:  o Canadian Free Trade Agreement (CFTA) - Article 513: 1(b.v)  o North American Free Trade Agreement (NAFTA) - Article 1016: 2(b)  8. Period of the proposed contract or delivery date   The equipment must be delivered before March 31, 2018.  9. Cost estimate of the proposed contract   The estimated value of the contract, including option(s), is $218,440.80 (GST Included).   10. Name and address of the pre-identified supplier   Rigaku Americas Corporation 9009 New Trails Drive The Woodlands, TX 77381  11. Suppliers' right to submit a statement of capabilities   Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  12. Closing date for a submission of a statement of capabilities   The closing date and time for accepting statements of capabilities is December 8 at 2:00 p.m. MDT.   13. Inquiries and submission of statements of capabilities  Inquiries and statements of capabilities are to be directed to:   Name: Christopher Lau Title: Procurement Specialist Public Services and Procurement Canada Acquisitions Branch  5th Floor, ATB Place North 10025 Jasper Ave. Edmonton, AB T5J1S6  Telephone: 780-566-2195 Facsimile: 780-497-3510 E-mail address: christopher.lau@pwgsc.gc.ca  Delivery Date: 14/11/2017  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Extension of chemical hood chimneys - Laurentian Forestry Centre - Quebec

Natural Resources Canada | Published November 23, 2017  -  Deadline July 12, 2017
cpvs

Work of this invitation to tender comprises the extension of the chemical chimneys of 3 areas and the insulation and elastomeric membrane repair around working areas.

Address:1055 rue du PEPS, Québec, QC G1V 4C7

Optional Site Visit: November 29, 2017 at 10h00

RMSO - Runway De-Icing Chemical

Public Works and Government Services Canada | Published November 20, 2017
Winner
Nachurs Alpine Solutions Inc.
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Best Overall  Proposal GSIN Description:  DEICING AND DEFROSTING FLUID, AIRCRAFT SURFACES Quantity: 1

Gas Chromatography - Triple Quadrupole Mass Spectrometer (GCMSMS)

Health Canada | Published November 17, 2017  -  Deadline April 12, 2017
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  Agilent Technologies Canada Inc. 6705 Millcreek Unit 5 Mississauga Ontario Canada L5N5M4 Nature of Requirements:   Gas Chromatography - Triple Quadrupole Mass Spectrometer (GCMSMS)  H5337-173604/A Shannahan, Cassandra Telephone No. - (819) 420-1068   1. Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.   2. Definition of the requirement  Health Canada (HC) requires the supply, delivery and installation of a Gas Chromatography - Triple Quadrupole Mass Spectrometer (GCMSMS) system to the Pest Management Regulatory Agency (PMRA) Laboratory Services Section (LSS) to enhance its existing capabilities for the analysis of pesticides in plant vegetation and biological matrices such as urine.  In order to meet project specifications, highly sensitive and efficient GCMSMS is required.     This system must allow users to accurately quantify and unambiguously identify over 350 different pesticides and other chemical contaminants with fast (800 transitions/s) data acquistions and must support, deliver and enable the transfer of methods from the current 7890B-GC/5975B-MSD to the GCMSMS. A system from Agilent Technologies that includes a 7693 series Automatic Liquid Sampler  with 7890 B Gas Chromatograph and a 7010 B Quadrupole Mass Spectrometer is identified to meet all mandatory requirements.   3. Criteria for assessment of the Statement of Capabilities    Minimum Essential Requirements: Any interested supplier must demonstrate by way of a statement of capabilities that its product meets the following requirements:  Minimum Mandatory Capabilities/Technical/Performance Criteria/Specifications:  1.1. GCMSMS - triple quadrupole system capabilities  1.1.1 The whole required system must include a gas chromatograph and a triple quadrupole mass spectrometer system. The GCMSMS system must allow users to perform MRM (multiple reaction monitoring) for quantification and identification in a single injection for the determination of pesticides and other chemical contaminants in complex samples such as plant leaves and soil. All of these must be achieved in electron ionzationation mode with fast (800 transitions/sec) data acquisition speed. The GCMSMS must support, deliver and enable MRM analysis with fast (0.5ms) dwell times to perform functions of differentiating isomers and separating analytes of interest from interferences in complex vegetation sample matrices.  1.1.2. The GCMSMS must have complete compatibility to import and run the existing validated 7890-GC/5975-MSD methods and compound libraries of a large number of pesticides, i.e. ~ 350, already in use in the Quality System at the PMRA Laboratory. As a part of the mandatory requirements, all current GC/MSD methods of up to 350 pesticides and libraries are required to transfer from the 7890B-GC/5975B-MSD to GCMSMS in less than 5 minutes while achieving the sensitivity and dynamic range specified below.  1.1.3. The GCMSMS must deliver an increase in sensitivity of at least one hundred (100) times in signal-to-noise ratio (S/N) on GC/MSD methods already optimized on the 7890-GC/5975-MSD Systems for 90% of the 350 pesticides. The software that comes with GCMSMS must provide the functionality to directly access and analyse historic archived 7890-GC/5975-MSD raw data files in the Quality System at the PMRA Laboratory.  1.2  Mass Spectrometer (MS) must meet all of the following mandatory technical requirements:  1.2.1  MS type must be Triple Quadrupole;  1.2.2  Mode of operation must be Electron Ionization (EI);  1.2.3  Must have dual filaments for EI;  1.2.4  Ion source temperature ranges must be from 150 to 350 degree C;  1.2.5  Electron energy ranges must be from 10 to 300eV;  1.2.6  Must have two mass filters of monolithic hyperbolic gold-coated quadrupole;  1.2.7  Mass Range must be m/z 10 to 1050;  1.2.8  Mass axis stability must be <+ 8 10 24 40 106 200 272 800 - 0.10 amu over hours (10 to degree c); 1.2.9 quadrupole temperature must be c; 1.2.10 mass range m z 1,050; 1.2.11 resolution selectable , 0.7 2.5 daltons and the default tune settable, 0.4 4.0 support custom tuning; 1.2.12 have a scan rate of up 20,000 u s; 1.2.13 tuning system options both autotune manual; 1.2.14 mrm speed exactly transitions sec; 1.2.15 minimum dwell time 0.5 msec; 1.2.16 linear hexapole collision cell; 1.2.17 triple-axis hed-em detector; 1.2.18 cell gas used nitrogren with helium quench gas; 1.2.19 energy 60ev; 1.2.20 vacuum dual stage turbomolecular pump total flow ml min; 1.2.21 for ei instrument dection limit meet 0.5fg or less ocatfluoronapthalene (ofn) at transition --> 222, 100 msec dwell time; and  1.2.22  For EI MRM must meet S/N 1uL of 2fg/uL of OFN produces 600:1 RMS S/N for the transition m/z 272--> 222.  1.3.   The Automatic Liquid Autosampler and Gas Chromatograph must meet all of the following mandatory technical requirements:  1.3.1  The Gas Chromatograph must have electronic pneumatice controls that can control pressure to 0.001 psi and can correct for temperature with a specified termperature coefficient of 0.001 psi/ degree C;  1.3.2  The Gas Chromatograph must have blackflush technology;  1.3.3  The Gas Chromatograph must have a multimode inlet;  1.3.4 The autosampler must allow for 150 vial capacity and 16 sample turret; and  1.3.5  The autosampler must allow for automated dilution, internal standard addition, heating, mixing and solvent addition  1.4.  Software  1.4.1  Software for data handling (quantitative and qualitative) and reporting of pesticides and envrionmental pollutants must be provided.  1.4.2 The MRM database must have at least 8000 optimized transitions.  1.4.3 The software licence must allow remote off-line manipulation of data on another workstation connected via the network.  1.5 Warranty  1.5.1 A minimum five (5) year full system (mass spectrometer, gas chromatograph, data system, etc.) warranty must be provided.  1.6 Options  1.6.1 The contract will include the irrevocable option to purchase an additional three (3) identical  7890B GC -7010 MS/MS instrument systems (price adjusted to inflation and Canadian dollar value) within the next four (4) years (until April 2022) depending on operational needs and budgetary allocation.  4. Applicability of the trade agreement(s) to the procurement  This procurement is subject to the following trade agreements:   Canadian Free Trade Agreement (CFTA) World Trade Organization - Agreement on Government Procurement (WTO-AGP) North American Free Trade Agreement (NAFTA)  5. Justification for the Pre-Identified Supplier  Agilent Technologies is the only supplier that can supply a system meeting all the technical requirements and has the exclusive rights for the 7890B GC -7010B MSMS.  6. Government Contracts Regulations Exception  The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - only one person is capable of performing the contract.    7. Exclusions and/or Limited Tendering Reasons  World Trade Organization - Agreement on Government Procurement (WTO-AGP) - Article XV (d) Canadian Free Trade Agreement (CFTA) - Article 513.1(b) (iii) and (v) North American Free Trade Agreement (NAFTA) - Article 1016.2(d)   8. Period of the proposed contract or delivery date  The equipment must be delivered on or before March 31, 2018; and  The proposed contract is for a period of 5 years, from date of Contract award.  9. Name and address of the pre-identified supplier  Agilent Technologies Canada Inc. 6705 Millcreek Dr. Unit 5 Mississauga ON L5N 5M4 Canada  10. Suppliers' right to submit a statement of capabilities  Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  11. Closing date for a submission of a statement of capabilities  The closing date and time for accepting statements of capabilities is December 4, 2017 at 2:00 p.m. EST.  12. Inquiries and submission of statements of capabilities  Inquiries and statements of capabilities are to be directed to:  Cassandra Shannahan Public Services and Procurement Canada Commercial and Consumer Products Directorate 11 Laurier Street, 6A2, Phase III Place du Portage, Gatineau, Québec, K1A 0S5  Telephone: (819) 420-1068 Facsimile: (819) 956-3814 E-mail address: cassandra.shannahan@pwgsc-tpsgc.gc.ca    Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

PARTS FOR STEAM GENERATOR

Department of National Defence | Published November 17, 2017  -  Deadline December 29, 2017
cpvs

NOTICE OF PROPOSED PROCUREMENT

The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax and CFB Esquimalt.

Item 1, GSIN: 4530, NSN: 01-507-5249, NOZZLE,OIL BURNER,PRESSURE ATOMIZING

Acceptable Part No.: 18459, NCAGE: 12736

Quantity: 40, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 2, GSIN: 4530, NSN: 01-507-5249, NOZZLE,OIL BURNER,PRESSURE ATOMIZING

Acceptable Part No.: 18459, NCAGE: 12736

Quantity: 40, Unit of Issue: EA, to be delivered to CFB Halifax

Item 3, GSIN: 4140, NSN: 01-507-5351, FAN ASSEMBLY,CENTRIFUGAL

Acceptable Part No.: CM-4559, NCAGE: 12736

Quantity: 4, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 4, GSIN: 4140, NSN: 01-507-5351, FAN ASSEMBLY,CENTRIFUGAL

Acceptable Part No.: CM-4559, NCAGE: 12736

Quantity: 6, Unit of Issue: EA, to be delivered to CFB Halifax

Item 5, GSIN: 5640, NSN: 01-118-7178, CEMENT,INSULATION,HIGH TEMPERATURE

Acceptable Part No.: 11297, NCAGE: 12736

Quantity: 9, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 6, GSIN: 5640, NSN: 01-118-7178, CEMENT,INSULATION,HIGH TEMPERATURE

Acceptable Part No.: 11297, NCAGE: 12736

Quantity: 3, Unit of Issue: EA, to be delivered to CFB Halifax

Item 7, GSIN: 6685, NSN: 01-507-5251, GAGE,PRESSURE,DIAL INDICATING

Acceptable Part No.: 26586, NCAGE: 12736

Quantity: 26, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 8, GSIN: 6685, NSN: 01-507-5251, GAGE,PRESSURE,DIAL INDICATING

Acceptable Part No.: 26586, NCAGE: 12736

Quantity: 9, Unit of Issue: EA, to be delivered to CFB Halifax

Item 9, GSIN: 6685, NSN: 01-617-1387, THERMOCOUPLE ASSEMB

Acceptable Part No.: 31355, NCAGE: 12736

Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 10, GSIN: 6685, NSN: 01-617-1387, THERMOCOUPLE ASSEMB

Acceptable Part No.: 31355, NCAGE: 12736

Quantity: 2, Unit of Issue: EA, to be delivered to CFB Halifax

Item 11, GSIN: 4330, NSN: 01-528-9821, BASE ASSEMBLY,BURNER

Acceptable Part No.: UH-30671, NCAGE: 12736

Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 12, GSIN: 4330, NSN: 01-528-9821, BASE ASSEMBLY,BURNER

Acceptable Part No.: UH-30671, NCAGE: 12736

Quantity: 5, Unit of Issue: EA, to be delivered to CFB Halifax

Item 13, GSIN: 4530, NSN: 01-528-9820, PAN ASSEMBLY,REFRACTORY

Acceptable Part No.: UH-30093, NCAGE: 12736

Quantity: 1, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 14, GSIN: 4530, NSN: 01-528-9820, PAN ASSEMBLY,REFRACTORY

Acceptable Part No.: UH-30093, NCAGE: 12736

Quantity: 2, Unit of Issue: EA to be delivered to CFB Halifax

Item 15, GSIN: 4410, NSN: 01-520-5381, PUMP,CHEMICAL

Acceptable Part No.: 38172, NCAGE: 12736

Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 16, GSIN: 4410, NSN: 01-520-5381, PUMP,CHEMICAL

Acceptable Part No.: 38172, NCAGE: 12736

Quantity: 5, Unit of Issue: EA, to be delivered to CFB Halifax

Item 17, GSIN: 6685, NSN: 01-298-6852, GAGE,PRESSURE,DIAL INDICATING

Acceptable Part No.: 27789, NCAGE: 12736

Quantity: 15, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 18, GSIN: 6685, NSN: 01-298-6852, GAGE,PRESSURE,DIAL INDICATING

Acceptable Part No.: 27789, NCAGE: 12736

Quantity: 15, Unit of Issue: EA, to be delivered to CFB Halifax

Item 19, GSIN: 6150, NSN: 00-490-7673, LEAD,ELECTRICAL

Acceptable Part No.: UH33200, NCAGE: 12736

Quantity: 8, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 20, GSIN: 6150, NSN: 00-490-7673, LEAD,ELECTRICAL

Acceptable Part No.: UH33200, NCAGE: 12736

Quantity: 23, Unit of Issue: EA, to be delivered to CFB Halifax

Item 21, GSIN: 4410, NSN: 20-A01-5649, HARDNESS TEST KIT

Acceptable Part No.: 59438, NCAGE: 12736

Quantity: 5, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 22, GSIN: 4410, NSN: 20-A01-5649, HARDNESS TEST KIT

Acceptable Part No.: 59438, NCAGE: 12736

Quantity: 7, Unit of Issue: EA, to be delivered to CFB Halifax

Item 23, GSIN: 4820, NSN: 01-507-5246, VALVE,SAFETY RELIEF

Acceptable Part No.: 31291, NCAGE: 12736

Quantity: 9, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 24, GSIN: 4820, NSN: 01-507-5246, VALVE,SAFETY RELIEF

Acceptable Part No.: 31291, NCAGE: 12736

Quantity: 8, Unit of Issue: EA to be delivered to CFB Halifax

Item 25, GSIN: 3030, NSN: 20-A0H-1437, BELT,V

Acceptable Part No.: 36112, NCAGE: 12736

Quantity: 3, Unit of Issue: EA, to be delivered to CFB Esquimalt

Item 26, GSIN: 3030, NSN: 20-A0H-1437, BELT,V

Acceptable Part No.: 36112, NCAGE: 12736

Quantity: 8, Unit of Issue: EA, to be delivered to CFB Halifax

Bidders proposing an Equivalent or a Substitute Product must indicate the brand name and model and/or Part Number and the NCAGE they are offering.

The Crown retains the rights to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.

Runway deicing/anti-icing compound

Transport Canada | Published November 16, 2017
Winner
Nachurs Alpine Solutions Inc.
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Lowest/Lower Bid GSIN Description:  Miscellaneous Chemical Specialities Quantity: 1

Analyzers

Environment Canada | Published November 10, 2017
Winner
C.D. Nova-Tech Inc.
cpvs

Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Public Advertising Contract Award Procedure (Procurement Strategy): Exclusive Rights GSIN Description:  Chemical Analysis Instruments Quantity: 1

Powered Air Purifying respirator air supply unit

Department of National Defence | Published November 6, 2017
Winner
Avon Protection Systems, Inc.
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / FTAs with Peru / Colombia / Panama / Korea Comprehensive Land Claim Agreement: No Notification Method: Source List Contract Award Procedure (Procurement Strategy): Exclusive Rights GSIN Description:  Mask, Chemical/Biological (Non-Marine) Quantity: 1

Repair and maintenance services of motion picture film equipment, and related audio-visual equipment

Library and Archives Canada | Published November 1, 2017
Winner
KL Archival Film Equipment
cpvs

  1. Advance Contract Award Notice (ACAN)

An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.

  1. Definition of the requirement
     

Library and Archives Canada has a requirement for the provision of repair and maintenance services of motion picture film equipment, and related audio-visual equipment.

  1. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)
     

Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:

  1. The bidder must have five(5) years of experience in the last ten (10) years maintaining, repairing and modifying Oxberry film printers;
  2. The bidder must have constructed motion picture liquid gates for Oxberry printers;
  3. The bidder must have five (5) years of experience in the last ten (10) years maintaining, repairing and modifying the Bell and Howell Model 6131F printer including ancillary gear such as light boards, punch tape readers, FCC cueing systems and all related devices such as sprocket drives, pins, gears, pumps, vacuums, viewers, hoses, light housings for sound and camera, filters, and safe lights;
  4. The bidder must have five (5) years of experience in the last ten (10) years maintaining and repairing sensitometric and densitometric equipment including testing and calibration of said equipment;
  5. The bidder must have five (5) years of experience maintaining, repairing and modifying motion picture film cleaning equipment;
  6. The bidder must have five (5) years of experience in the last ten (10) years maintaining, repairing and modifying Bremson and Colormaster motion picture film timing and analysis equipment;
  7. The bidder must have five (5) years of experience in the last ten (10) years maintaining, repairing and modifying motion picture Intercine and Steenbeck film editing equipment;
  8. The bidder must have five (5) years of experience in the last ten (10) years maintaining, repairing and modifying Triese Engineering 16mm/35mm demand drive unit motion picture film processing equipment and related chemical mixing tanks and systems, including automatic replenishment feed and delivery systems;
  9. The bidder must have five (5) years of experience in the last ten (10) years repairing, modifying and constructing shrinkage gauges, synchronizers, splicers (cement, tape and ultrasonic) and rewinds;
  10. The bidder must have five (5) years of experience in the last ten (10) years maintaining, repairing and modifying Kinoton 16mm/35mm motion picture projectors and related amplifiers, rectifiers, power supplies and controls.
  1. Applicability of the trade agreement(s) to the procurement
    This procurement is subject to the following trade agreement(s)
    • Canadian Free Trade Agreement (CFTA)
    • World Trade Organization - Agreement on Government Procurement (WTO-AGP)
    • North American Free Trade Agreement (NAFTA)

5. Justification for the Pre-Identified Supplier

The proposed supplier has unique experience in the construction, repair and modification of motion picture printer liquid gates, contact printers, motion picture optical/liquid gate printers, sensitometric and densitometic equipment, and motion picture film timing and analysis equipment. The proposed supplier has proven unique expertise and skills in the manufacture of replacement parts for obsolete equipment, the manufacture of precision equipment within exacting standards required for motion picture film analysis, copying and treatment, demonstrated knowledge of photographic optics as related to motion picture film analysis, copying and treatment, demonstrated knowledge of photographic optics as related to motion picture cameras, printers and related equipment, skills in the construction of custom equipment for obsolete motion picture film formats (28mm, 8mm, 9.5mm film), and in problem solving solutions to archival motion picture film equipment.

6. Government Contracts Regulations Exception(s)

Exception (d) of the Government Contracts Regulations- only one firm is capable of performing the Contract.

Applicable Limited Tendering Provision under WTO-AGP Article XV.1 (a) under NAFTA Article 1016.2(a)

7. Ownership of Intellectual Property

Ownership of any Foreground Intellectual Property arising out of the proposed contract will vest in the Contractor.

8. Period of the proposed contract or delivery date

The proposed contract is for a period of two (2) years, from November 12, 2017 to November 11, 2019 and two (2) one-year option periods.

9. Cost estimate of the proposed contract

The estimated value of the contract, including option(s), is $357,000.00 (GST/HST extra).

10. Name and address of the pre-identified supplier

KL Archival Film Equipment / 1479007 ONTARIO Ltd.

P.O. Box 1155

Almonte, Ontario

K0A 1A0

Canada

11. Suppliers' right to submit a statement of capabilities

Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

12. Closing date for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is Thursday October 19, 2017 at 2:00 pm EDT.

13. Inquiries and submission of statements of capabilities

Inquiries and statements of capabilities are to be directed to:

Geneviève Rioux

Senior Contracting Officer

550 de la Cité blvd.

Gatineau, Qc

K1A 0N4
Telephone: 343-998-1925
E-mail: Genevieve.Rioux@Canada.ca

X-Ray Diffraction System

Department of National Defence | Published October 31, 2017  -  Deadline November 12, 2017
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   X-Ray Diffraction System  W0114-185528/A Weaver, Tammy Telephone No. - (613) 484-1809 (    ) Fax No. - (613) 545-8067 (    )  The Department of Chemistry & Chemical Engineering at the Royal Military College of Canada requires a Powder X-ray Diffraction System (powder XRD) with a broad range of capabilities. These  include wide, small and ultra small angle X-ray scattering diffraction in transmission and reflection modes to enable phase identification and quantification, structure determination and refinement, whole pattern fitting Rietveld standardless quantitative analysis, pair distribution function analysis, crystallite size and crystallinity determination, thin film analysis, orientation analysis, capillary & micro diffraction,  texture & stress analysis . The system must be capable of analyzing powders, thin films, solids, liquids, gels and fibres,  Qty: 1 All the deliverables must be received on or before 01 March 2018.  Training is to be completed no later than 30 March 2018.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Spin Coater and Glovebox System

Department of National Defence | Published October 30, 2017  -  Deadline November 12, 2017
cpvs

Trade Agreement: CETA / WTO-AGP / NAFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements:   Spin Coater and Glovebox System  W0114-185531/A Abela, Aaron Telephone No. - (905) 615-2061 (    ) e-mail: aaron.abela@pwgsc-tpsgc.gc.ca  Line 1, Spin Coater and Glovebox System  Royal Military College of Canada (RMCC), Department of Physics and Space Science has a requirement for the supply, delivery and installation of one (1) Spin Coater and Glovebox System. The glovebox is a gas purification chamber that allows scientists to work under controlled environment. The spin coater is located inside the glovebox and allows the deposition of thin films of various chemical compounds by turning the substrate at specific speeds and accelerations. Supply, delivery, installation, and on-site training must be completed on or before March 31, 2018. See herein for further details.    Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.