Public tenders for business in Sacramento-ca-95816 United States

Find all Business tenders in the world.
Finding business opportunities has never been easier.

Results for business. Make a new search!
BusinessUnited Statessacramento-ca-95816

Success Lake Septic Services

Department of the Army, U.S. Army Corps of Engineers | Published March 9, 2017  -  Deadline April 10, 2017
cpvs

Solicitation: W91238-17-Q-0010 Contracting Office:US Army Corps of Engineers Sacramento District: CESPK-CT-B1325 J StreetSacramento CA 95814-2922 Contract Specialist: Stacy Pereyda HillEmail: stacy.hill@usace.army.mil Set-Aside: Total Small Business NAICS Code: 562991FSC Code: S205 Award Determination: The purchase order will be awarded to the responsive and responsible small business determined to be the most advantageous to the Government as Lowest Price Technically Acceptable and will be considered, with the following relationship between each factor: Technical, Experience and Past Performance when combined are significantly more important than price. Past Performance: The Government will evaluate past performance information to assess the offeror's likelihood of success in performing the requirements stated in the solicitation. Currency and relevance of the information (as determined by the Government), the source of the information, content of the data and general trends in the contractor's performance may be considered. Price: The proposed price will be evaluated for whether it is realistic for the work to be performed: reflects a clear understanding of the requirements, and is consistent with the requirements of the solicitation. Description: The U.S. Army Corps of Engineers, Sacramento District is issuing this announcement for the septic services at Success Lake. Please review the Performance Work Statement contained in Solicitation W91238-17-Q-0010 which shall be issued electronically in accordance with FAR 4.502 and 5.102. Vendors wishing an electronic copy may download it from www.fbo.gov on or about March 10, 2017. Synopsis Date: March 09, 2017Solicitation Issue Date: March 10, 2017Quotation Due Date: April 10, 2017 Solicitation: This solicitation shall not be issued in a hard copy format. All prospective vendors are required to register at the System for Award Management website, (www.sam.gov). The Federal government cannot award a contract to any vendors not listed in SAM.  

Dump Truck Bed 2001 Freightline Model FL70

Department of the Army, National Guard Bureau | Published September 12, 2016  -  Deadline September 16, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in Federal Acquisition Regulation (FAR) subpart12.6, "Streamlined Procedures for Evaluation and Solicitation for CommercialItems," using Simplified Acquisition Procedures under FAR part 13 assupplemented with additional information included in this notice. Thisannouncement constitutes the only solicitation; quotations are beingrequested.This solicitation is a request for quotations (RFQ). The solicitation documentand incorporated provisions and clauses are those in effect through FederalAcquisition Circular (FAC) 2005-88 The associated North American IndustrialClassification System (NAICS) code for this procurement is 336120, with asmall business size standard of $7.5M.Please see the attched solicitation W912TF-16-T-0032-U0001.  This announcement will close September 16, 2016 at 4PM EST. Submit all quotes to Cynthia Thompson via email to cynthia.thompson2.mil@mail.mil. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency.  Any questions or conerns regarding this solicitation should be forwarded to Cynthia Thompson via email to cynthia.thompson2.mil@mail.mil.

Laboratory Analysis for Low-Level Selenium � Mid-Pacific Region

Department of the Interior, Bureau of Reclamation | Published September 12, 2016  -  Deadline September 23, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, quotes are being requested are a written solicitation will not be issued. Solicitation (R16PS01713) is issued as a request for quotation (RFQ) in accordance with FAR 12.6 for commercial items. The associated North American Industrial Classification Standard (NAICS) Code for this request is 541380 with a small business size standard of $15M. The results of this requirement will be a firm-fixed price Blanket Purchase Agreement (BPA). This requirement is being solicited as 100% Total Small Business Set-Aside. See Attachments for complete solicitation.

J&A Sole Source-Stirling Solar Array Completion/Overhaul/Repair

Department of the Army, U.S. Army Corps of Engineers | Published September 12, 2016
cpvs

AWARD ANNOUNCEMENTProject Title: Overhaul of Stirling ArrayProject Location: Tooele Army Depot, UTAcquisition Type: SRM ConstructionAcquisition Method: Other than Full and Open CompetitionSolicitation Number: W91238-16-R-0037Contract Number: W91238-16-C-0025Contractor: R.C. HUNT ELECTRIC, INC.1863 W ALEXANDER STSALT LAKE CITY, UT, 84119-7612 ,DUNS: 067690755CAGE: 1WDS7Business Size: Other than SmallSolicitation Date: 05-05-2016Award Date: 09-12-2016Est: Completion Date: 09-22-2017Award Amount: $1,950,000.00NAICS: 237130Description: The Contractor shall perform the overhaul of theStirling Solar Array and replacement of selectgeneratorsContract Type: Firm-Fixed PriceContracting Officer: Shirley M. Yarbro, x5329,Shirley.M.Yarbro@usace.army.milProject Manager: Charlie Gritzmacher, x5193,Contract Specialist: Daniel Czech, x7012,daniel.e.czech@usace.army.mil

Preventative Mainenance

Department of the Army, National Guard Bureau | Published September 5, 2016  -  Deadline September 15, 2016
cpvs

This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation WILL NOT be issued. The solicitation W912LA-16-T-0057 is issued as a Request for Quotations. The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89, effective 14 July 2016. The NAICS code for this acquisition is 811198. The California National Guard has a requirement for preventative maintenance in Sacramento, CA and Los Alamitos, CA .See the attachments for a complete specifications. The following provisions/clauses are incorporated: 52.252-2; Clauses incorporated by Reference; 52.203-3, Gratuities; 52.204-4, Printed or Copied-Double Sided on Post-consumer Fiber Content Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.212-1, Instructions to Offerors-Commercial Items; 52.212-3 ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-8, Utilization of Small Business Concerns; 52.219-28, Post-Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Disabled Veterans of the Vietnam Era; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Disabled Veterans; 52.222-50, Combating Trafficking in Persons; 52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-Central Contractor registration; 52.233-2, Service of Protest; 52.233-4, Applicable Law for Breach of Contract Claim; and, 52.252-6, Authorized Deviation in Clauses. The provisions/ clauses at DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items apply to this acquisition and must be fully completed and submitted with offer; 252.212-7001 (Dev), Contract terms and Conditions Required to Implement Statutes to Defense Acquisition of Commercial Items (Deviation) are applicable to this acquisition. The following clauses are incorporated: 52.203-6 Alt. I, Restrictions on Subcontractor Sales to the Government; 52.204-4, Printed or Copied-Double sided on Recycled Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-7, Information Regarding Responsibility Matters; 52.219-14, Limitations on Subcontracting; 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment; 52.233-2, Service of Protest; 252.203-7002, Requirement to Inform Employees of Whistleblower Rights; 252.203-7005, Requirements Relating to Compensation of Former DoD Officials; 252.203-7996, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation); 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country; 252.213-7000, Notice to Prospective Suppliers on the Use of Past Performance Information Retrieval Systems - Statistical Reporting in Past Performance Evaluations; 252.215-7008, Only One Offer; 252.222-7007, Representation Regarding Combating Trafficking in Persons; 252.223-7006, Prohibition on Storage and Disposal of Toxic and Hazardous Materials; 252.225-7000, Buy American Act - Balance of Payments Program Certificate; 252.225-7031, Secondary Arab Boycott of Israel; 252.225-7048, Export-Controlled Items; 252.225-7050, Disclosure of Ownership or Control by the Government of a country that is a State Sponsor of Terrorism; 252.232-7003, Electronic Submission of Payment Requests; 252.232-7006, Wide Area Workflow Payment Instructions; 252.232-7010, Levies on Contract Payments are also applicable to this acquisition; 252.244-7000, Subcontracts for Commercial Items; 252.247-7022, Representation of Extent of Transportation by Sea; 52.247-7024, Notification of Transportation of Supplies by Sea. All Contractors must have a current registration in the System for Award Management (SAM). Please contact me directly for attachments if you are unable to download them. Quotes are due NLT September 15, 2016 by 11:00 A.M. at USPFO for California, Contracting Office, 903 Industrial Way, Camp Roberts, CA 93451. Requests shall be in writing to the above address, or emailed, ATTN: Jose Hernandez.

Medical Supplies

Department of the Army, National Guard Bureau | Published August 29, 2016  -  Deadline September 7, 2016
cpvs

This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation WILL NOT be issued. The solicitation W912LA-16-T-0039 is issued as a Request for Quotations. The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89, effective 14 July 2016. The NAICS code for this acquisition is 446199. The California National Guard has a requirement for Medical Supplies to Medical Detachment in Sacramento, CA 95828-0904.See the attachments for a complete specifications. The following provisions/clauses are incorporated: 52.252-2; Clauses incorporated by Reference; 52.203-3, Gratuities; 52.204-4, Printed or Copied-Double Sided on Post-consumer Fiber Content Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.212-1, Instructions to Offerors-Commercial Items; 52.212-3 ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-8, Utilization of Small Business Concerns; 52.219-28, Post-Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Disabled Veterans of the Vietnam Era; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Disabled Veterans; 52.222-50, Combating Trafficking in Persons; 52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-Central Contractor registration; 52.233-2, Service of Protest; 52.233-4, Applicable Law for Breach of Contract Claim; and, 52.252-6, Authorized Deviation in Clauses. The provisions/ clauses at DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items apply to this acquisition and must be fully completed and submitted with offer; 252.212-7001 (Dev), Contract terms and Conditions Required to Implement Statutes to Defense Acquisition of Commercial Items (Deviation) are applicable to this acquisition. The following clauses are incorporated: 52.203-6 Alt. I, Restrictions on Subcontractor Sales to the Government; 52.204-4, Printed or Copied-Double sided on Recycled Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-7, Information Regarding Responsibility Matters; 52.219-14, Limitations on Subcontracting; 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment; 52.233-2, Service of Protest; 252.203-7002, Requirement to Inform Employees of Whistleblower Rights; 252.203-7005, Requirements Relating to Compensation of Former DoD Officials; 252.203-7996, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation); 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country; 252.213-7000, Notice to Prospective Suppliers on the Use of Past Performance Information Retrieval Systems - Statistical Reporting in Past Performance Evaluations; 252.215-7008, Only One Offer; 252.222-7007, Representation Regarding Combating Trafficking in Persons; 252.223-7006, Prohibition on Storage and Disposal of Toxic and Hazardous Materials; 252.225-7000, Buy American Act - Balance of Payments Program Certificate; 252.225-7031, Secondary Arab Boycott of Israel; 252.225-7048, Export-Controlled Items; 252.225-7050, Disclosure of Ownership or Control by the Government of a country that is a State Sponsor of Terrorism; 252.232-7003, Electronic Submission of Payment Requests; 252.232-7006, Wide Area Workflow Payment Instructions; 252.232-7010, Levies on Contract Payments are also applicable to this acquisition; 252.244-7000, Subcontracts for Commercial Items; 252.247-7022, Representation of Extent of Transportation by Sea; 52.247-7024, Notification of Transportation of Supplies by Sea. All Contractors must have a current registration in the System for Award Management (SAM). Please contact me directly for attachments if you are unable to download them. Quotes are due NLT September 7, 2016 by 11:00 A.M. at USPFO for California, Contracting Office, 903 Industrial Way, Camp Roberts, CA 93451. Requests shall be in writing to the above address, or emailed, ATTN: Jose Hernandez.

Hearing Booth Trailer

Department of the Army, National Guard Bureau | Published August 29, 2016  -  Deadline September 12, 2016
cpvs

This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation WILL NOT be issued. The solicitation W912LA-16-T-0037 is issued as a Request for Quotations. The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89, effective 14 July 2016. The NAICS code for this acquisition is 446199. The California National Guard has a requirement for Hearing Booth Trailer to The State Surgeons Office in Sacramento, CA 95816.See the attachments for a complete specifications. The following provisions/clauses are incorporated: 52.252-2; Clauses incorporated by Reference; 52.203-3, Gratuities; 52.204-4, Printed or Copied-Double Sided on Post-consumer Fiber Content Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.212-1, Instructions to Offerors-Commercial Items; 52.212-3 ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-8, Utilization of Small Business Concerns; 52.219-28, Post-Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Disabled Veterans of the Vietnam Era; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Disabled Veterans; 52.222-50, Combating Trafficking in Persons; 52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-Central Contractor registration; 52.233-2, Service of Protest; 52.233-4, Applicable Law for Breach of Contract Claim; and, 52.252-6, Authorized Deviation in Clauses. The provisions/ clauses at DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items apply to this acquisition and must be fully completed and submitted with offer; 252.212-7001 (Dev), Contract terms and Conditions Required to Implement Statutes to Defense Acquisition of Commercial Items (Deviation) are applicable to this acquisition. The following clauses are incorporated: 52.203-6 Alt. I, Restrictions on Subcontractor Sales to the Government; 52.204-4, Printed or Copied-Double sided on Recycled Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-7, Information Regarding Responsibility Matters; 52.219-14, Limitations on Subcontracting; 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment; 52.233-2, Service of Protest; 252.203-7002, Requirement to Inform Employees of Whistleblower Rights; 252.203-7005, Requirements Relating to Compensation of Former DoD Officials; 252.203-7996, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation); 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country; 252.213-7000, Notice to Prospective Suppliers on the Use of Past Performance Information Retrieval Systems - Statistical Reporting in Past Performance Evaluations; 252.215-7008, Only One Offer; 252.222-7007, Representation Regarding Combating Trafficking in Persons; 252.223-7006, Prohibition on Storage and Disposal of Toxic and Hazardous Materials; 252.225-7000, Buy American Act - Balance of Payments Program Certificate; 252.225-7031, Secondary Arab Boycott of Israel; 252.225-7048, Export-Controlled Items; 252.225-7050, Disclosure of Ownership or Control by the Government of a country that is a State Sponsor of Terrorism; 252.232-7003, Electronic Submission of Payment Requests; 252.232-7006, Wide Area Workflow Payment Instructions; 252.232-7010, Levies on Contract Payments are also applicable to this acquisition; 252.244-7000, Subcontracts for Commercial Items; 252.247-7022, Representation of Extent of Transportation by Sea; 52.247-7024, Notification of Transportation of Supplies by Sea. All Contractors must have a current registration in the System for Award Management (SAM). Please contact me directly for attachments if you are unable to download them. Quotes are due NLT September 12, 2016 by 11:00 A.M. at USPFO for California, Contracting Office, 903 Industrial Way, Camp Roberts, CA 93451. Requests shall be in writing to the above address, or emailed, ATTN: Jose Hernandez.

Sacramento District Corps of Engineers Drilling IDIQ

Department of the Army, U.S. Army Corps of Engineers | Published September 3, 2016  -  Deadline September 21, 2016
cpvs

Solicitation: W91238-16-R-0042 Contracting Office:US Army Corps of Engineers Sacramento District: CESPK-CT-B1325 J StreetSacramento CA 95814-2922 Contract Specialist: Tilden L. Brooks Jr.tilden.l.brooks@usace.army.mil(916) 557-7929 Contracting Officer: Raymond R. Greenheckraymond.greenheck@usace.army.mil(916) 557-6882 Set-Aside: Small Business NAICS Code: 541360SIC Code: 1481FSC Code: F015 Award Determination: The Government plans to award contracts, without discussions, to not more than five offerors, using the Low Price Technically acceptable best value process. Description: Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) Contract for Drilling Services for use primarily within the U.S. Army Corps of Engineers (USACE) Sacramento District's (CESPK) Civil and Military Works Boundaries. Work may also be performed within the USACE South Pacific Division (CESPD) boundaries including the following districts: Sacramento District (CESPK), Albuquerque District (CESPA), Los Angeles District (CESPL), and San Francisco (CESPN). The geographical area includes California, Arizona, Nevada, Utah, New Mexico and parts of Oregon, Idaho, Wyoming, Colorado and Texas. Synopsis Date: 3 September 2016Solicitation Issue Date: 3 September 2016Quotation Due Date: 21 September 2016 Solicitation Ordering: This solicitation shall not be issued in a hard copy format. All prospective vendors are required to register at the Central Contract Registration website, (www.ccr.gov).

Apple/Adobe/Microsoft

Department of the Army, National Guard Bureau | Published August 24, 2016  -  Deadline September 19, 2016
cpvs

This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation WILL NOT be issued. The solicitation W912LA-16-T-0046 is issued as a Request for Quotations. The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89, effective 15 August 2016. This solicitation is brand name/open market. The NAICS code for this acquisition is 423430. The small business size standard for this NAICS code is 250 employees. The California National Guard has a requirement for various Apple products (hardware), Adobe Acrobat Pro 2015, Microsoft Office 2016 (PC & MAC), and miscellaneous accessories to be delivered to Sacramento, CA 95816-3214. See the attachments for a complete list of required specification. The following provisions/clauses are incorporated: 52.252-2; Clauses incorporated by Reference; 52.203-3, Gratuities; 52.204-4, Printed or Copied-Double Sided on Post-consumer Fiber Content Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6,Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment;52.211-6, Brand Name or Equal; 52.212-1, Instructions to Offerors-Commercial Items; 52.212-3 ALT I, Offeror Representations and Certifications – Commercial Items; 52.212-4, Contract Terms and Conditions – Commercial Items;52.222-3, Convict Labor; 52.222-19, Child labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-50, Combating Trafficking in Persons; 52.223-15, Energy Efficient in Energy Consuming Products;52.223-16, Acquisition of EPEAT-Registered Personal Computer Products;52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management; 52.233-3, Protest after Award;52.233-4, Applicable Law for Breach of Contract Claim; and,52.252-6, Authorized Deviation in Clauses. The provisions/ clauses at DFARS 252.212-7000, Offeror Representations and Certifications – Commercial Items apply to this acquisition and must be fully completed and submitted with offer; 252.212-7001 (Dev), Contract terms and Conditions Required to Implement Statutes to Defense Acquisition of Commercial Items (Deviation) are applicable to this acquisition. The following clauses are incorporated: 52.203-6 Alt. I, Restrictions on Subcontractor Sales to the Government; 52.204-4, Printed or Copied-Double sided on Recycled Paper; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-7, Information Regarding Responsibility Matters; 52.219-14, Limitations on Subcontracting; 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment; 252.203-7002, Requirement to Inform Employees of Whistleblower Rights; 252.203-7005, Requirements Relating to Compensation of Former DoD Officials; 252.225-7000, Buy American Act – Balance of Payments Program Certificate;252.225-7048, Export-Controlled Items; 252.232-7003, Electronic Submission of Payment Requests; 252.232-7006, Wide Area Workflow Payment Instructions; 252.232-7010, Levies on Contract Payments are also applicable to this acquisition; All Contractors must have a current registration in the System for Award Management (SAM). Please contact me directly for attachments if you are unable to download them. Quotes are due NLT September 12, 2016 by 11:00 A.M. at USPFO for California, Contracting Office, 903 Industrial Way, Camp Roberts, CA 93451. Requests shall be in writing to the above address, or emailed, ATTN: Stephanie Brown.

UNRESTRICTED Indefinite-Delivery Indefinite-Quantity (IDIQ) Architect-Engineer Contract for Military Design and Interagency and International Services (IIS) in Support of the South Pacific Division (SPD)

Department of the Army, U.S. Army Corps of Engineers | Published August 24, 2016  -  Deadline October 14, 2016
cpvs

1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Up to four firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. A-E services are required to provide the full spectrum of design disciplines on all or portions of Military Design and Interagency and International Services (IIS) projects. The primary emphasis of A-E services will focus on Military and IIS Projects; however, design services may also include Energy Conservation Investment Program (ECIP), and Civil Works projects.A specific scope of work and services will be issued with each task order. This procurement will be conducted under FSC Code: C219; SIC Code: 8711; NAICS Code: 541330. The size standard for this code is $15,000,000.00. Up to four contracts will be negotiated and will be awarded within one year after the required response date to this announcement. Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contracts will be negotiated. These contracts will be for a period of performance of up to five (5) years, consisting of a base contract period of three (3) years and an option to extend the contract term by an additional two (2) years. This MATOC will have a combined capacity of $44,000,000.00. The full $44,000,000.00 will be available for the base year and any remaining funds will carry over once the option years are exercised. The options may be exercised at the discretion of the Government. Since more than one contract will be awarded as a result of this announcement for the same or similar work, selection for task order awards will be made as follows: (1) All awardees will be given a fair opportunity to be considered for each task order award in excess of $2,500. (2) In making selection of the awardee to receive a specific task order, the Contracting Officer will consider past performance of previous task orders, quality of previous task orders, timeliness of previous task orders, cost control, the firm's strength and previous experience in relation to the work requirements and geographic location described in the statement of work for each task order. Details of the selection process will be included in the resultant contracts. All interested Architect-Engineers are reminded that in accordance with the provisions of FAR Sections 19.7, 52.219-8, 52.219-9 or equivalent DFARS Sections, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged business. The wages and benefits of service employees (see FAR 22.1) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to employee's office location (not the location of the work). To be eligible for contract award a firm or joint venture must be registered in the System or Award Management (SAM). Register via the Internet Site at https://www.sam.gov. If a large business firm is selected for one of these contracts, it will be required to submit a detailed subcontracting plan at a later date. A detailed plan is not required to be submitted with the SF 330; however, the plans to do so should be specified in block H of the SF 330. If a large business is selected it must comply with FAR 52-219.9 regarding the requirement to subcontract. Sacramento District's recommended goal for work intended to be subcontracted is 41.5% for small business. The goal further states that of the 40.08% to be subcontracted to small business, 21.69% is for small disadvantaged business (subset to small business), 7.33% is for small business/woman owned (subset to small business), 5.58% for HUBZone small business (subset to small business), 3.0% for veteran-owned small business and 4.97% is for service-disabled veteran-owned small business (subset to small business). If the selected firm submits a plan with lesser goals, it must submit written rationale of why the above goals are not met. Firms should indicate personnel and subcontracts selected to work on the contract and state their management structure. Contractor Performance Evaluations: In accordance with the provisions of Subpart 36.604 (Performance Evaluation of the Federal Acquisition Regulation (FAR), A-E contractors performance shall be evaluated throughout the performance of the contract. The United States Army Corps of Engineers (USACE) follows the procedures outlined in Engineering Pamphlet (EP) 715-1-7 to fulfill this FAR requirement. Performance evaluations will be prepared in the Contractor Performance Assessment Reporting System (CPARS), which is a web-based system. The Architect-Engineer Contract Administration Support System (ACASS) was previously used, and CPARS is now the current platform. Engineering Pamphlet (EP) 715-1-7, Chapter 6 has not been updated, as yet to reflect this change. Past performance evaluations shall be prepared for each architect-engineer services contract of $35,000 or more. A final evaluation will be prepared for each task order exceeding $35,000.00. For this procurement, the evaluation shall be prepared after acceptance of the A-E product on each task order. Past performance evaluations may also be prepared for contracts below $35,000. After an evaluation (interim or final) is written up by the USACE, the contractor will have the ability to access, review and comment on the evaluation for a period of 30 days. Accessing and using CPARS requires specific software, called PKI certification, which is installed on the user's computer. The certification is a Department of Defense requirement and was implemented to provide security in electronic transaction. The certification software could cost approximately $100-$120 per certificate per year and is purchased from External Certificate Authorities (ECA) vendors. Current information about the PKI certification process and for contracting vendors can be found on the web site http://www.cpars.gov. If the contractor wishes to participate in the performance evaluation process, access to CPARS and PKI certification is the sole responsibility of the Contractor. 2. PROJECT INFORMATION: Architectural-Engineering (A-E) services are required to provide the full spectrum of design disciplines on all or portions of complete Military and Interagency and International Services (IIS) projects and Civil works projects as secondary. Projects will primarily be located within the South Pacific Divisions military boundaries of CA, NV, UT and AZ and the civil works boundaries of CA, NV, AZ, UT, and portions of OR, ID, CO and WY. The contracts may also be used by other Districts within South Pacific Division (Sacramento, San Francisco, Los Angeles and Albuquerque Districts) to encompass the entire South Pacific Division geographical area of responsibility. Use of the contracts outside the above areas of responsibility is subject to the review and approval of the contracting officer. The A-E services required under this contract may range in scope from planning/design studies supporting programming/budgetary documents, technical feasibility studies, alternatives development, engineering optimization evaluations, design quality review services, design-build requirements packages, to a new project design for Military and IIS and Civil Works Projects. The primary focus of this contract is to provide design services in support of the Military and IIS Programs. The design services could range from an architectural renovation (some of historical significance), maintenance and repair of a variety of small projects, ECIP Program studies/designs (more detail below), or may also include design of complete additions, alterations, or new facility designs for Military projects such as barracks, warehouses, storage facilities, administrative facilities, training facilities, maintenance facilities, aircraft hangars, computer facilities, aircraft runways, taxiways, aprons, treatment plants, and the entire spectrum of infrastructure (road and utility) systems. Energy Conservation Investment Program (ECIP) projects (a subset of Army Milcon Program) include energy reduction and renewable energy projects, including but not limited to: photovoltaic, wind, microgrids, energy management control systems (EMCS) and water conservation. Projects may also include design of waterfront or in-water facilities such as piers and marine terminals, which would require design services for either sustainment of existing facilities or design of new facilities. Demolition of existing facilities may be required which will necessitate asbestos and or lead based paint investigation with provisions for removal included in the design documents. Design services may also be required to support the Interagency and International Services (IIS) Program providing technical assistance to non-Department of Defense (DoD) federal agencies, state and local governments, tribal nations, private U.S. firms, international organizations, and foreign governments. Typical agencies requiring design or design review support could be the Dept of Veterans Affairs (medical and administrative type facilities), EPA, Customs and Border Protection, and DOE. Design services may also include support of the Civil Works Program. Civil Works project studies and designs could involve levees, floodwalls, dams, spillways, various mechanical gate structures, pumping stations, stilling basins, hydraulic flow control structures, and bridges. Civil Works studies may include, but not be limited to, the evaluation of flood damage, preparation of engineering analysis, acquisition of topographic and hydrographic data, and environmental restoration to include wetlands development. The contractor shall be responsible for designs and drawings using computer aided design and drafting (CADD). All data shall meet Spatial Data Standards for Facilities, Infrastructure, and Environment (SDSFIE) requirements. Work may be required to be performed in an AutoCAD, Microstation, or equal, environment. Many projects will be required to be modeled in a BIM environment (Revit). GIS work may be field, desktop or Internet based. Firms may be required to develop Hyper-Text Mark-up Language (HTML) as the project medium. All final text files generated under this task order shall be furnished to the Sacramento District in Adobe Acrobat (PDF), with a working copy in Microsoft Office MS Word. Drawing files and as-built drawings shall be submitted in AutoCAD or MicroStation, in the same environment as designed, in accordance with https://tsc.wes.army.mil/products/standards/aeguide/index.asp], per AE Deliverable Guidelines at https://tsc.wes.army.mil/products/ standards/aeguide/aecadd.asp. The Government will only accept final documents found to be fully operational without conversion or reformatting. Responding firms must show computer and Internet capability for accessing the Criteria Bulletin Board System (CBBS) http://cbbs.spk.usace.army.mil/index.html and the Design Review and Checking System (DrChecks) https://www.projnet.org. Estimates shall be prepared using Corps of Engineers Computer Aided Cost Estimating system (M-CACES Second Generation MII) (software provided by Government) software; however training to use this software and the current pending Cost Book library will require purchasing by the Contractor. 3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Criteria" a" through "d" are primary. Criteria "e" through "f" are secondary and will only be used as tiebreakers among technically equal firms. a. Specialized Experience and technical competence. The A-E must provide examples of not more than ten (10) projects completed within the last 5 years that best demonstrate specialized experience and technical competency in the areas listed below. Project examples submitted should be of completed projects. All projects cited must identify start/complete dates as well as the project size (cost and scope). Please also provide the percentage of work completed by the prime contractor. Prime Contractor's that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors.      1. Capability and recent experience in Military or IIS project studies and designs involving facilities such as: barracks, warehouses, storage facilities, administrative facilities, medical facilities, training facilities, maintenance facilities, aircraft hangers, aircraft runways/taxiways/aprons, roadways, utilities, energy reduction and renewable energy projects, and waterfront facilities. Experience with conceptual level studies/design for programming purposes, preparation of Design Build requirement packages, as well as final design (plans and specification for construction) is preferred.      2. Capability and experience with services in support of design, such as acquisition of geotechnical (explorations), topographic survey, utility survey, material testing results, design reviews (quality control and constructability), economic analysis, life cycle cost analysis, environmental documents and assessment of environmental impacts, cost engineering (using MCACES), GIS and CADD/BIM capability.      3. Work experience within the South Pacific Division boundaries, and particularly inside the Sacramento District boundaries will be considered in determining the most highly qualified firms. b. Firms must demonstrate professional and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, certifications, registration, relevant experience and longevity with the firm of key technical personnel (3-year minimum is preferable). Project related experience of new employees with the firm will be considered. Experience in the discipline in which he/she will be working on should be identified. (SF 330, Part I, Sections E and G). Qualified professional personnel who are certified, registered and highly trained in the following key disciplines: Project Management, Architectural, Civil, Structural, Electrical, Mechanical, Geotechnical, Landscape Architect, Cost Engineering, Topographic Surveys, LEED Accredited Professionals, Geographic Information Specialist, CADD/BIM (Revit) Operator, Environmental Specialist and Certified Industrial Hygienist (CIH). c. Past performance of the Prime A-E firm must be provided on all projects submitted in section a. above, Specialized Experience and Technical Competence criteria. The prime A-E firm shall provide a reference using the Past Performance Questionnaire (PPQ), attached to this announcement, and/or a final Past Performance Information Retrieval System (PPIRS) report. The prime A-E is responsible for forwarding the PPQ to each past performance reference submitted under this synopsis. The submitting A-E firm should complete blocks 1-4 of the PPQ and the client/customer should complete blocks 5-8 and the evaluation survey. The client/customer should return the PPQ to the firm to be submitted with the SF330 or send, via email, the PPQ directly to the Government point of contact identified in this synopsis. PPIRS may be queried for all prime, Joint Venture (JV) and key subcontractors. In addition to the above, the Government may review any other sources of information for evaluating past performance. In the event that adverse past performance information is obtained outside the PPIRS query and the A-E firm did not have the opportunity to respond, the A-E firm will have the opportunity to respond. Or if the adverse past performance is the reason why the firm is not selected as one of the most highly qualified, the A-E firm will have the opportunity to comment. If CPARS evaluations are not available or are so sparse no meaningful rating can be reasonably assigned, the A-E firm will be assigned "neutral" rating and shall not be rated favorably or unfavorably. d. Capacity to accomplish multiple simultaneous task orders at different locations within the required timeframe, including professional qualifications of firm's staff and subcontractors to be assigned to the projects which are necessary for satisfactory performance in the required time. Firms must demonstrate the capacity to accomplish multiple task orders simultaneously. e. SB and SDB Participation: [Defense PGI 236.602-1(a)(6)(C)] The extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team, measured as a percentage of the total estimated contract efforts, regardless of whether the SB, SDB, HCU or MI is a prime contractor, subcontractor or joint venture partner. The greater the participation, the greater the consideration. f. Volume of DOD contract awards received in the last 12 months. 4. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit an original and FOUR (4) copies of the SF330 (03/2013) Part I, and an original and Four (4) copies of the SF 330 Part II for the prime firm and all consultants/subcontracts including related services questionnaires regarding past performance on non-Government projects to the office shown below, ATTN: Contracting A-E Team. The SF 330 shall not exceed 200 single pages (100 pages if double sided) 8 ½ x 11, not counting the cover letter, table of contents or any dividing page used to identify each SF 330 Section. Font size will be 10 or 12 font in either Times New Roman, Arial or Courier. No more than (3) three 11 x 17 pages for organization charts. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc). In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy must be submitted electronically on a CD. Please include the CD in the original SF330 binder. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by the close of business (4:00 pm local time) the day of the closing date will be considered for selection. No other notification will be made and no further action is required. Solicitation packages are not provided for A-E contracts. This is not a request for proposals. All responsible sources may submit the required SF 330 which will be considered by the agency. Contracting Office Address: US Army Engineer District, Sacramento, 1325 J. Street, Sacramento, CA 95814 Place of Performance: US Army Engineer District, Sacramento 1325 J. Street, Sacramento CA 95814 5. OFFERORS QUESTIONS AND COMMENTS: Questions regarding this announcement must be in writing and addressed to Melissa DeNigris at Melissa.A.DeNigris@usace.army.mil and Carolyn Mallory at Carolyn.E.Mallory@usace.army.mil. All questions must be submitted no later than 23 September 2016 at 3:00 p.m., Pacific Standard Time (PST) to allow time for a response.

SMALL BUSINESS Indefinite-Delivery Indefinite-Quantiy (IDIQ) Architect-Engineer Contract for Military Design and Interagency and International Services (IIS) in Support of the South Pacific Division (SPD)

Department of the Army, U.S. Army Corps of Engineers | Published August 24, 2016  -  Deadline October 14, 2016
cpvs

1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Up to four two will be selected for negotiation based on demonstrated competence and qualifications for the required work. A-E services are required to provide the full spectrum of design disciplines on all or portions of Military Design and Interagency and International Services (IIS) projects. The primary emphasis of A-E services will focus on Military and IIS Projects; however, design services may also include Energy Conservation Investment Program (ECIP), and Civil Works projects. A specific scope of work and services will be issued with each task order. This procurement will be conducted under FSC Code: C219; SIC Code: 8711; NAICS Code: 541330. The size standard for this code is $15,000,000.00. To be considered a Small Business under this NAICS code, the respondent's average revenue for the last three fiscal years cannot be more than $15,000,000.00. Up to two (2) contracts will be negotiated and awarded within one year after the required response date to this announcement. Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contracts will be negotiated. These contracts will be for a period of performance of up to five (5) years, consisting of a base contract period of three (3) years and an option to extend the contract term by an additional two (2) years. This MATOC will have a combined capacity of $10,000,000.00. The full $10,000,000.00 will be available for the base year and any remaining funds will carry over once the option years are exercised. The option may be exercised at the discretion of the Government. Since more than one contract will be awarded as a result of this announcement for the same or similar work, selection for task order awards will be made as follows: (1) All awardees will be given a fair opportunity to be considered for each task order award in excess of $2,500. (2) In making selection of the awardee to receive a specific task order, the Contracting Officer will consider past performance of previous task orders, quality of previous task orders, timeliness of previous task orders, cost control, the firm's strength and previous experience in relation to the work requirements and geographic location described in the statement of work for each task order. Details of the selection process will be included in the resultant contracts. All interested Architect-Engineers are reminded that in accordance with the provisions of FAR Sections 19.7, 52.219-8, 52.219-9 or equivalent DFARS Sections, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged business. The wages and benefits of service employees (see FAR 22.1) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to employee's office location (not the location of the work). To be eligible for contract award a firm or joint venture must be registered in the System or Award Management (SAM). Register via the Internet Site at https://www.sam.gov. Contractor Performance Evaluations: In accordance with the provisions of Subpart 36.604 (Performance Evaluation of the Federal Acquisition Regulation (FAR), A-E contractors performance shall be evaluated throughout the performance of the contract. The United States Army Corps of Engineers (USACE) follows the procedures outlined in Engineering Pamphlet (EP) 715-1-7 to fulfill this FAR requirement. Performance evaluations will be prepared in the Contractor Performance Assessment Reporting System (CPARS), which is a web-based system. The Architect-Engineer Contract Administration Support System (ACASS) was previously used, and CPARS is now the current platform. Engineering Pamphlet (EP) 715-1-7, Chapter 6 has not been updated, as yet to reflect this change. Past performance evaluations shall be prepared for each architect-engineer services contract of $35,000 or more. A final evaluation will be prepared for each task order exceeding $35,000.00. For this procurement, the evaluation shall be prepared after acceptance of the A-E product on each task order. Past performance evaluations may also be prepared for contracts below $35,000. After an evaluation (interim or final) is written up by the USACE, the contractor will have the ability to access, review and comment on the evaluation for a period of 30 days. Accessing and using CPARS requires specific software, called PKI certification, which is installed on the user's computer. The certification is a Department of Defense requirement and was implemented to provide security in electronic transaction. The certification software could cost approximately $100-$120 per certificate per year and is purchased from External Certificate Authorities (ECA) vendors. Current information about the PKI certification process and for contracting vendors can be found on the web site http://www.cpars.gov. If the contractor wishes to participate in the performance evaluation process, access to CPARS and PKI certification is the sole responsibility of the Contractor. 2. PROJECT INFORMATION: Architectural-Engineering (A-E) services are required to provide the full spectrum of design disciplines on all or portions of complete Military/IIS projects and Civil works projects as secondary. Projects will primarily be located within the South Pacific Divisions military boundaries of CA, NV, UT and AZ and the civil works boundaries of CA, NV, AZ, UT, and portions of OR, ID, CO and WY. The contracts may also be used by other Districts within South Pacific Division (Sacramento, San Francisco, Los Angeles and Albuquerque Districts) to encompass the entire South Pacific Division geographical area of responsibility. Use of the contracts outside the above areas of responsibility is subject to the review and approval of the contracting officer. The A-E services required under this contract may range in scope from planning/design studies supporting programming/budgetary documents, technical feasibility studies, alternatives development, engineering optimization evaluations, design quality review services, design-build requirements packages, to a new project design for Military and IIS and Civil Works Projects. The primary focus of this contract is to provide design services in support of the Military and IIS Programs. Projects will typically be smaller (Programmed amounts in $500K to $3 million range typically), and of lesser overall complexity. Projects under the Military Program will typically be funded by the Sustainment, Restoration and Modernization (SRM) program. The design services could range from an architectural renovation (some of historical significance), maintenance and repair of a variety of small projects, ECIP Program studies/designs (more detail below), or may also include design of complete additions, alterations, or new facility designs for Military projects such as barracks, warehouses, storage facilities, administrative facilities, training facilities, maintenance facilities, aircraft hangars, computer facilities, aircraft runways, taxiways, aprons, treatment plants, and the entire spectrum of infrastructure (road and utility) systems. Energy Conservation Investment Program (ECIP) projects (a subset of Army Milcon Program) include energy reduction and renewable energy projects, including but not limited to: photovoltaic, wind, microgrids, energy management control systems (EMCS) and water conservation. Demolition of existing facilities may be required which will necessitate asbestos and or lead based paint investigation with provisions for removal included in the design documents. Design services may also be required to support the Interagency and International Services (IIS) Program providing technical assistance to non-Department of Defense (DoD) federal agencies, state and local governments, tribal nations, private U.S. firms, international organizations, and foreign governments. Typical agencies requiring design or design review support could be the Dept of Veterans Affairs (medical and administrative type facilities), EPA, Customs and Border Protection, and DOE. Design services may also include support of the Civil Works Program. Civil Works project studies and designs could involve levees, floodwalls, dams, spillways, various mechanical gate structures, pumping stations, stilling basins, hydraulic flow control structures, and bridges. Civil Works studies may include, but not be limited to, the evaluation of flood damage, preparation of engineering analysis, acquisition of topographic and hydrographic data, and environmental restoration to include wetlands development. The contractor shall be responsible for designs and drawings using computer aided design and drafting (CADD). All data shall meet Spatial Data Standards for Facilities, Infrastructure, and Environment (SDSFIE) requirements. Work may be required to be performed in an AutoCAD, Microstation, or equal, environment. Many projects will be required to be modeled in a BIM environment (Revit). GIS work may be field, desktop or Internet based. Firms may be required to develop Hyper-Text Mark-up Language (HTML) as the project medium. All final text files generated under this task order shall be furnished to the Sacramento District in Adobe Acrobat (PDF), with a working copy in Microsoft Office MS Word. Drawing files and as-built drawings shall be submitted in AutoCAD or MicroStation, in the same environment as designed, in accordance with https://tsc.wes.army.mil/products/standards/aeguide/index.asp], per AE Deliverable Guidelines at https://tsc.wes.army.mil/products/ standards/aeguide/aecadd.asp. The Government will only accept final documents found to be fully operational without conversion or reformatting. Responding firms must show computer and Internet capability for accessing the Criteria Bulletin Board System (CBBS) http://cbbs.spk.usace.army.mil/index.html and the Design Review and Checking System (DrChecks) https://www.projnet.org. Estimates shall be prepared using Corps of Engineers Computer Aided Cost Estimating system (M-CACES Second Generation MII) (software provided by Government) software; however training to use this software and the current pending Cost Book library will require purchasing by the Contractor. 3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Criteria" a" through "d" are primary. Criteria "e" through "f" are secondary and will only be used as tiebreakers among technically equal firms. a. Specialized Experience and technical competence. The A-E must provide examples of not more than ten (10) projects completed within the last 5 years that best demonstrate specialized experience and technical competency in the areas listed below. Project examples submitted should be of completed projects. All projects cited must identify start/complete dates as well as the project size (cost and scope). Please also provide the percentage of work completed by the prime contractor. Prime Contractor's that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors.      1. Capability and recent experience in Military or IIS project studies and designs    involving facilities such as: barracks, warehouses, storage facilities, administrative facilities, medical facilities, training facilities, maintenance facilities, aircraft hangers, aircraft runways/taxiways/aprons, roadways, utilities, energy reduction and renewable energy projects. Experience with conceptual level studies/design for programming purposes, preparation of Design Build requirement packages, as well as final design (plans and specification for construction) is preferred.       2. Capability and experience with services in support of design, such as acquisition of geotechnical (explorations), topographic survey, utility survey, material testing results, design reviews (quality control and constructability), economic analysis, life cycle cost analysis, environmental documents and assessment of environmental impacts, cost engineering (using MCACES), GIS and CADD/BIM capability.      3. Work experience within the South Pacific Division boundaries, and particularly inside the Sacramento District boundaries will be considered in determining the most highly qualified firms. b. Firms must demonstrate professional and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, certifications, registration, relevant experience and longevity with the firm of key technical personnel (3-year minimum is preferable). Project related experience of new employees with the firm will be considered. Experience in the discipline in which he/she will be working on should be identified. (SF 330, Part I, Sections E and G). Qualified professional personnel who are certified, registered and highly trained in the following key disciplines: Project Management, Architectural, Civil, Structural, Electrical, Mechanical, Geotechnical, Landscape Architect, Cost Engineering, Topographic Surveys, LEED Accredited Professionals, Geographic Information Specialist, CADD/BIM (Revit) Operator, Environmental Specialist and Certified Industrial Hygienist (CIH). c. Past performance of the Prime A-E firm must be provided on all projects submitted in section a. above, Specialized Experience and Technical Competence criteria. The prime A-E firm shall provide a reference using the Past Performance Questionnaire (PPQ), attached to this announcement, and/or a final Past Performance Information Retrieval System (PPIRS) report. The prime A-E is responsible for forwarding the PPQ to each past performance reference submitted under this synopsis. The submitting A-E firm should complete blocks 1-4 of the PPQ and the client/customer should complete blocks 5-8 and the evaluation survey. The client/customer should return the PPQ to the firm to be submitted with the SF330 or send, via email, the PPQ directly to the Government point of contact identified in this synopsis. PPIRS may be queried for all prime, Joint Venture (JV) and key subcontractors. In addition to the above, the Government may review any other sources of information for evaluating past performance. In the event that adverse past performance information is obtained outside the PPIRS query and the A-E firm did not have the opportunity to respond, the A-E firm will have the opportunity to respond. Or if the adverse past performance is the reason why the firm is not selected as one of the most highly qualified, the A-E firm will have the opportunity to comment. If CPARS evaluations are not available or are so sparse no meaningful rating can be reasonably assigned, the A-E firm will be assigned "neutral" rating and shall not be rated favorably or unfavorably. d. Capacity to accomplish multiple simultaneous task orders at different locations within the required timeframe, including professional qualifications of firm's staff and subcontractors to be assigned to the projects which are necessary for satisfactory performance in the required time. Firms must demonstrate the capacity to accomplish multiple task orders simultaneously. e. SB and SDB Participation: [Defense PGI 236.602-1(a)(6)(C)] The extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team, measured as a percentage of the total estimated contract efforts, regardless of whether the SB, SDB, HCU or MI is a prime contractor, subcontractor or joint venture partner. The greater the participation, the greater the consideration. f. Volume of DOD contract awards received in the last 12 months. 4. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit an original and Four (4) copies of the SF330 (03/2013) Part I, and an original and Four (4) copies of the SF 330 Part II for the prime firm and all consultants/subcontracts including related services questionnaires regarding past performance on non-Government projects to the office shown below, ATTN: Contracting A-E Team. The SF 330 shall not exceed 150 single pages (75 pages if double sided) 8 ½ x 11, not counting the cover letter, table of contents or any dividing page used to identify each SF 330 Section. Font size will be 10 or 12 font in either Times New Roman, Arial or Courier. No more than (3) three 11 x 17 pages for organization charts. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc). In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy must be submitted electronically on a CD. Please include the CD in the original SF330 binder. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by the close of business (4:00 pm local time) the day of the closing date will be considered for selection. No other notification will be made and no further action is required. Solicitation packages are not provided for A-E contracts. This is not a request for proposals. All responsible sources may submit the required SF 330 which will be considered by the agency.Contracting Office Address: US Army Engineer District, Sacramento, 1325 J. Street, Sacramento, CA 95814 Place of Performance: US Army Engineer District, Sacramento 1325 J. Street, Sacramento CA 95814 5. OFFERORS QUESTIONS AND COMMENTS: Questions regarding this announcement must be in writing and addressed to Melissa DeNigris at Melissa.A.DeNigris@usace.army.mil and Carolyn Mallory at Carolyn.E.Mallory@usace.army.mil. All questions must be submitted no later than 23 September 2016 at 3:00 p.m., Pacific Standard Time (PST) to allow time for a response.  

Replacement CCV System Installation - Sacramento, CA

Department of Homeland Security, Office of the Chief Procurement Officer | Published July 7, 2016
cpvs

Synopsis forReplacement CCV System InstallationinSacramento, CARequest for Quote (RFQ) HSHQW9-16-Q-00011 The US Department of Homeland Security (DHS), National Protection and Programs Directorate (NPPD), Federal Protective Service (FPS) intends to solicit and award a firm-fixed-price purchase order for the purchase and installation of a replacement Closed Circuit Video (CCV) System in the John E. Moss Federal Building in Sacramento, CA. This acquisition is being solicited as a 100% Small Business set-aside. The North American Industry Classification System (NAICS) code is 561621 and the size standard is $20.5 million. The source selection process to be utilized for this acquisition is best value with trade-offs. The submission requirements and evaluation criteria will be defined in the Request for Quotation (RFQ). The Period of Performance for the installation is no later than 60 business days after the receipt of the Notice to Proceed. The Contractor shall provide all labor, material, management, supervision, training, licenses, and permits to provide the services in accordance with the Statement of Work (SOW). No contract award shall be made to any contractor that does not have an active registration in the System for Award Management at such time as the government is prepared to make an award. This is a synopsis only, NO DOCUMENTS HAVE BEEN POSTED AT THIS TIME. The RFQ documents should be posted by Tuesday, July 19th, 2016.

American River Aerial Photography

Department of the Interior, Bureau of Reclamation | Published July 6, 2016  -  Deadline July 14, 2016
cpvs

The Department of the Interior, Bureau of Reclamation, Mid-Pacific Region has a requirement for aerial photography near American River to observe the number and location of spawning salmon.(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) Solicitation number R16PS01328 is issued as a request for quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-88. (iv) This is a total small business set-aside under NAICS 541922 with an associated small business size standard of $7.5M. (v) The contract line items (CLINS) are listed as follows: See Attachment 4 (return with quote) Proposed price shall include all applicable fees and taxes (vi) For description of requirements see attachment 1, "Performance Work Statement" (PWS). (viii) The provision at 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition and a statement regarding any addenda to the provision are attached. (ix) The provision at 52.212-2, Evaluation-Commercial Items, is incorporated in full text. See attachment 2 "Clauses and Provisions". (x) Quotes or Offers shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items, with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition. Addenda are attached. (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition. Addenda are attached. (xiii) Additional contract requirement(s) are attached. See Attachment No. 2 for applicable clause and provisions. (xiv) Defense Priorities and Allocations System (DPAS) is not applicable to this procurement. (xv) Quotes/Offers are due on July 14, 2016 at 1:00p.m. Pacific Daylight Time. Please E-Mail responses to ecelik@usbr.gov and ryousefgoarji@usbr.gov. (xvi) For Information regarding this procurement, please contact Mr. Erim Celik at (916) 978-4315 or via email at ecelik@usbr.gov. (xvii) Attachments Include: (1) Performance Work Statement, (2) Clauses and Provisions (3) Wage Determination. All of the above attachments are hereby incorporated and made a part of this solicitation and resultant purchase order or contract.(xviii) Site Visit: Not applicable.  

Success Lake Recreation Attendant Services RFQ

Department of the Army, U.S. Army Corps of Engineers | Published April 21, 2016  -  Deadline May 6, 2016
cpvs

Synopsis/Solicitation: W91238-16-Q-0024 Success Lake Recreation Attendant Services RFQ Contracting Office:US Army Corps of Engineers, Sacramento DistrictAttn: CESPK-CT-B (Contracting Division)1325 J StreetSacramento CA 95814-2922 Contract Specialist: Healon KnightEmail: Healon.D.Knight@usace.army.mil Set-Aside: Total Small Business NAICS Code: 721211PSC Code: M1PA Award Determination: The purchase order will be awarded to the responsive and responsible small business determined to be the most advantageous to the Government as the Lowest Price Technically Acceptable (LPTA). Technical Expertise, Experience and Past Performance will be considered, with the following relationship between each factor: Technical Expertise, Experience and Past Performance when combined are significantly more important than price. Past Performance: The Government will evaluate past performance information to assess the offeror's likelihood of success in performing the requirements stated in the solicitation. Currency and relevance of the information (as determined by the Government), the source of the information, content of the data and general trends in the contractor's performance may be considered. Price: The proposed price will be evaluated for whether it is realistic for the work to be performed, reflects a clear understanding of the requirements, and is consistent with the requirements of the solicitation. Description: The U.S. Army Corps of Engineers, Sacramento District is issuing this announcement for the Success Lake Recreation Attendant Services located in Tulare County, Porterville, CA. Please review the Performance Work Statement contained in Solicitation No. W91238-16-Q-0024 Request for Quotation which shall be issued electronically in accordance with FAR 4.502 and 5.102. Vendors wishing an electronic copy may download it from www.fbo.gov on or about 21 Apr 2016. Synopsis Date: 21 Apr 2016Solicitation Issue Date: 21 Apr 2016Proposal/Quotation Due Date: 06 May 2016 Solicitation: This solicitation shall not be issued in a hard copy format. All prospective vendors are required to register at the System for Award Management website, (www.sam.gov). The Federal government cannot award a contract to any vendors not listed in SAM. RFQ Vendor Questions/Answers Deadline: Monday, 2 May 2016, 5pm(PST)RFQ Proposal Deadline: Friday, 6 May 2016, 5pm(PST) Email all questions and proposals with required documents as outlined within the RFQ to Healon.D.Knight@usace.army.mil.  

Video Game

Department of the Army, U.S. Army Corps of Engineers | Published April 21, 2016  -  Deadline May 13, 2016
cpvs

Award Determination: The purchase order will be awarded to the responsive and responsible small business determined to be the most advantageous to the Government as a Best Value Trade-off. Experience, Applicability, and Past Performance will be considered, with the following relationship between each factor: Experience, Applicability, and Past Performance when combined are significantly more important than price. Past Performance: The Government will evaluate past performance information to assess the offeror's likelihood of success in performing the requirements stated in the solicitation. Currency and relevance of the information (as determined by the Government), the source of the information, content of the data and general trends in the contractor's performance may be considered. Price: The proposed price will be evaluated for whether it is realistic for the work to be performed: reflects a clear understanding of the requirements, and is consistent with the requirements of the solicitation. Description: The U.S. Army Corps of Engineers, Sacramento District is issuing this announcement for the production of a sand box style video game. Please review the Statement of Work contained in Solicitation W91238-16-Q-0031 which shall be issued electronically in accordance with FAR 4.502 and 5.102. Vendors wishing an electronic copy may download it from www.fbo.gov on or about 22 April 2016. Synopsis Date: 21 April 2016Solicitation Issue Date: 22 April 2016Quotation Due Date: 13 May 2016 Solicitation: This solicitation shall not be issued in a hard copy format. All prospective vendors are required to register at the System for Award Management website, (www.sam.gov). The Federal government cannot award a contract to any vendors not listed in SAM.  

38--Caterpillar 140M3 AWD Motor Grader

Department of the Interior, Bureau of Indian Affairs | Published April 1, 2016  -  Deadline April 18, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 40268595 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. The associated North American Industrial Classification System (NAICS) code for this procurement is 333120 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-04-18 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Sacramento, CA 95834 The Bureau of Indian Affairs requires the following items, Brand Name or Equal, to the following: LI 001: ***Indian SM BUS Economic Enterprise (ISBEE) Set-Aside*** ALL BIDS MUST MEET OR EXCEED MINIMUM REQUIREMENTS: CATERPILLAR 140M3 AWD MOTOR GRADER; MOLDBOARD 14'x24"x7/8" (4268mm x 610mm x 22mm); CURVED CUTTING EDGE 8"x3/4" (203mm x 19mm); STANDARD END BITS WITHOUT OVERLAY; RIPPER/SCARIFIER; STANDARD WEATHER AWD; BLADE LIFT ACCUMLATORS (Provides hydraulic lines for base functions and accumulators for the blade lift. allows approx. 1-3" of vertical blade travel to reduce impact loads. Nitrogen/oil accumulators activated by electric switch.); NON SY-KLONE PRECLEANER; BASE + 1 (RIP); HEAVY DUTY ELECTRIC STARTER; LOW FRONT HEADLIGHTS (Provide stationary rear brake lights along with the back-up lights. Provides low bar headlights with front turn signals, dimmer switch for road lighting, drop-down stop, tail, and rear turn signals and back-up lights); PLUS CAB (Standard glass with 150 amp alternator and rear wiper/washer); INTERIOR PLUS CAB (Heated cloth seat with air suspension. Radio with 12V, AM/FM, Weatherband, Bluetooth, USB and AUX Input. Rear Window Fan with defroster. Communication Converter (CB) and Sun Shade); SEAT BELT; SATELLITE PLE631 PRODUCT LINK; NO ACCUGRADE; GRADE CONTROL X SLOPE; ADVANCED JOYSTICK CONTROLS; 17.5R25 MX XTLA L2 MP TIRES; HITCH GUARD GP; 50/50 -35C(-31F) COOLANT; ENGLISH LANGUAGE AND DECALS; BASIC WORKING LIGHTS; REAR VISION CAMERA; OUTSIDE MOUNTED MIRRORS; TRANSMISSION GUARD; COUNTERWEIGHT PUSH PLATE; RIPPER TOOTH; RIPPER/SCARIFIER SHANKS/TEETH; DOMESTIC TRUCK******* PRICE TO INCLUDE ALL LABOR, INSTALLATION, 2-DAY TRAINING (TRAVEL, PER DIEM, LODGING) AND DELIVERY TO ZIP CODE 95834. ******* PRICE TO INCLUDE STANDARD 1YR WARRANTY FROM THE DELIVERY DATE (UNLIMITED HOURS; TRAVEL TIME AND MILEAGE NOT INCLUDED), 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Bureau of Indian Affairs intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Indian Affairs is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires ACTIVE registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Payment requests must be submitted electronically through the U. S. Department of the Treasury?s Invoice Processing Platform System (IPP). "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: 1. Attach Hardcopy Invoice. The Contractor must use the IPP website to register, access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. The offeror represents as part of its offer that it [ ] does [ ] does not meet the definition of Indian economic enterprise as defined in 1480.201. [End of provision]

HTRTS-M Student Lodging

Department of the Army, Army Contracting Command, MICC | Published May 6, 2016  -  Deadline May 30, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number for this requirement is W9124J-16-T-0082 and this combined synopsis/solicitation is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-82. This acquisition will be procured as a Small Business set-aside. The associated NAICS code is 721110 with a small business size standard is $32.5 Million. The contractor shall provide services to support the High Tech Regional Training Site-Maintenance (HTRTS-M) Student lodging to include parking for up to six 12-passenger vans, in accordance with the attached Performance Work Statement. Period of Performance: 1 July 2016 � 15 December 2016. Proposed contract line items are as follows: Item No. Description Quantity Unit 0001 Lodging (PoP: 1-31 July 2016) 1 Job 0002 Lodging (PoP: 1-31 Aug 2016) 1 Job 0003 Lodging (PoP: 1-29 Sep 2016) 1 Job 0004 Lodging (PoP: 2-13 Oct 2016) 1 Job 0004 Lodging (PoP: 1-31 Nov 2016) 1 Job 0004 Lodging (PoP: 1-15 Dec 2016) 1 Job The expected student populations for each month are attached. The location for the hotel must be located within 10 miles of BT Collins Army Reserve Center, Sacramento CA 95828-0905. Period of Performance: 1 July � 15 December 2016. The resulting contract will be a Firm Fixed Price Contract to a single contractor. Award will be made to the lowest priced, technically acceptable offer. In accordance with FAR 52.252-1, and FAR 52-252-2, the following clauses and provisions are incorporated by reference: 52.202-1, Definitions, 52.204-7, System for Award Management, 52.212-4, Contract Terms and Conditions - Commercial Items. In accordance with FAR 52.252-1, and FAR 52-252-2, the following clauses and provisions are incorporated in full text: 52.204-3, Taxpayer Identification; 52.212-1, Instructions to Offerors � Commercial Items;; 52.212-3, Offeror Representations and Certifications � Commercial Items � Alternate I; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders � Commercial Items (APR 2010); 52.243-1, Changes � Fixed Price � Alternate I; 52.232-18 - Availability of Funds; 52.252-1, Solicitation Provisions Incorporated by Reference; 52.252-2, Clauses incorporated by Reference; FAR 52.232-18 Availability of Funds; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials. All provisions and clauses may be accessed electronically at http://farsite.hill.af.mil/. The following provision is incorporated by full text: 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) Technical capability - Contractor to demonstrate how they intend to meet the requirements stated in the Performance Work Statement; (ii) Past performance; (iii) Price Award will be made on the basis of the technically acceptable proposal with the lowest price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) All offers are due by 30 May 2016, 08:00 a.m. CST, via email to gerry.l.brown.civ@mail.mil. Any questions regarding this solicitation shall be submitted in writing via email to: gerry.l.brown.civ@mail.mil, NLT 16 May 2016, 10 a.m. CST. No questions will be addressed via telephone. You will received confirmation of received questions via email. All deadlines or references to time for this solicitation will be due based on the Central Standard Time (CST) Zone. Quoter agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offer. The POC for this solicitation is Mr. Gerry Brown, Contract Specialist, Mission and Installation Contracting Command, Fort Sam Houston, TX, phone number is (210) 221-6378, e-mail: gerry.l.brown.civ@mail.mil and Mr. Gary Stevens, Contracting Officer, phone number (210) 466-2332; email: gary.l.stevens.civ@mail.mil

Small Business Indefinite-Delivery Indefinite-Quantity (IDIQ) Architect-Engineer Contract for Civil Works Design Serbvices in the Support of the South Pacific Division

Department of the Army, U.S. Army Corps of Engineers | Published April 8, 2016  -  Deadline May 24, 2016
cpvs

1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Up to two firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. A-E services are required to provide the full spectrum of design disciplines on all or portions of Civil Works projects. The primary emphasis of A-E services will focus on Civil Works Projects; however, design services may also include construction phase services (CPS), Military Construction (MILCON) and Hazardous Toxic Radiological Waste (HTRW) projects. Task orders issued under this contract may range in scope from a small study to a new project design for Civil Works projects. The design services may include design of new facilities and/or modification/improvement of existing facilities. Demolition of existing facilities may require provisions for abatement of asbestos and/or lead based paint removal to be included in the design documents which in turn would require A-E investigation to be done. A specific scope of work and services will be issued with each task order. This procurement will be conducted under FSC Code: C219; SIC Code: 8711; NAICS Code: 541330. The size standard for this code is $15,000,000.00. To be considered a Small Business under this NAICS Code, the respondent's average revenue for the last three fiscal years cannot be more than $15,000,000.00. Up to two contracts will be negotiated and will be awarded within one year after the required response date to this announcement. Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contracts will be negotiated. These contracts will be for a period of performance of up to five (5) years, consisting of a base contract period of three (3) years and an option to extend the contract term by an additional two (2) years. This MATOC will have a combined capacity of $10,000,000.00. The full $10,000,000.00 will be available for the base year and any remaining funds will carry over once the option year is exercised. The options may be exercised at the discretion of the Government. Since more than one contract will be awarded as a result of this announcement for the same or similar work, selection for task order awards will be made as follows: (1) All awardees will be given a fair opportunity to be considered for each task order award in excess of $2,500. (2) In making selection of the awardee to receive a specific task order, the Contracting Officer will consider past performance of previous task orders, quality of previous task orders, timeliness of previous task orders, cost control, the firm's strength and previous experience in relation to the work requirements and geographic location described in the statement of work for each task order. Details of the selection process will be included in the resultant contracts. All interested Architect-Engineers are reminded that in accordance with the provisions of FAR Sections 19.7, 52.219-8, 52.219-9 or equivalent DFARS Sections, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged business. The wages and benefits of service employees (see FAR 22.1) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to employee's office location (not the location of the work). To be eligible for contract award a firm or joint venture must be registered in the System For Award Management (SAM). Register via the Internet Site at https://www.sam.gov. Contractor Performance Evaluations: In accordance with the provisions of Subpart 36.604 (Performance Evaluation of the Federal Acquisition Regulation (FAR), A-E contractors performance shall be evaluated throughout the performance of the contract. The United States Army Corps of Engineers (USACE) follows the procedures outlined in Engineering Pamphlet (EP) 715-1-7 to fulfill this FAR requirement. Performance evaluations will be prepared in the Contractor Performance Assessment Reporting System (CPARS), which is a web-based system. The Architect-Engineer Contract Administration Support System (ACASS) was previously used, and CPARS is now the current platform. Engineering Pamphlet (EP) 715-1-7, Chapter 6 has not been updated, as yet to reflect this change. Past performance evaluations shall be prepared for each architect-engineer services contract of $35,000 or more. A final evaluation will be prepared for each task order exceeding $35,000.00. For this procurement, the evaluation shall be prepared after acceptance of the A-E product on each task order. Past performance evaluations may also be prepared for contracts below $35,000. After an evaluation (interim or final) is written up by the USACE, the contractor will have the ability to access, review and comment on the evaluation for a period of 30 days. Accessing and using CPARS requires specific software, called PKI certification, which is installed on the user's computer. The certification is a Department of Defense requirement and was implemented to provide security in electronic transaction. The certification software could cost approximately $100-$120 per certificate per year and is purchased from External Certificate Authorities (ECA) vendors. Current information about the PKI certification process and for contracting vendors can be found on the web site http://www.cpars.gov. If the contractor wishes to participate in the performance evaluation process, access to CPARS and PKI certification is the sole responsibility of the Contractor. 2. PROJECT INFORMATION: Task orders under this contract may include A-E services that provide the full spectrum of design disciplines on all or portions of Civil Works projects. The primary emphasis of A-E services will focus on Civil Works Projects; however, design services may also include construction phase services (CPS), Military Construction (MILCON) and Hazardous Toxic Radiological Waste (HTRW) projects. Task orders issued under this contract may range in scope from a small study to a new project design for Civil Works projects. The design services may include design of new facilities and/or modification/improvement of existing facilities. Demolition of existing facilities may require provisions for abatement of asbestos and/or lead based paint removal to be included in the design documents which in turn would require A-E investigation to be done. Civil Works project studies and designs could involve levees, floodwalls, dams, spillways, pumping stations, various mechanical gate structures, stilling basins, hydraulic flow control structures, bridges, buildings, infrastructure (road and utility) systems, operations and maintenance manuals, dam safety risk analyses, and flood damage reduction project/system risk based analysis. Civil Works studies may also include, but not be limited to, the evaluation of flood damage and risk, preparation of engineering analysis, acquisition of geotechnical (explorations), topographic and hydrographic data, material testing results, hydraulic physical modeling results, constructability reviews, economic analysis, environmental documents and environmental restoration to include wetlands development. Input may be required by the full range of disciplines including but not limited to: civil, structural, hydraulic, geotechnical, mechanical and electrical engineering, architectural, landscape architects, hydrology, geology, seismology, surveying, mapping, construction, and cost engineering. Individual task orders may include maintenance and repair type projects and miscellaneous architectural and engineering services associated with Civil Works projects. A smaller emphasis of design services may be for Military Construction and HTRW projects. The contractor shall be responsible for designs and drawings using computer aided design and drafting (CADD). Work may be performed in an AutoCAD, Microstation, or equal, environment. BIM work may be performed in either REVIT or Bentley BIM. GIS work may be field, desktop or Internet based. Firms may be required to develop Hyper-Text Mark-up Language (HTML) as the project medium. All final text files generated under a task order shall be furnished to the Sacramento District in Adobe Acrobat (PDF), with a working copy in Microsoft Office MS Word. Drawing files and as-built drawings shall be submitted in AutoCAD or MicroStation, in the same environment as designed, in accordance with the guidance at http://cbbs.spk.usace.army.mil/a-e_guidance.html and http://cbbs.spk.usace.army.mil/cadd.html. The target platform is a Pentium 3.0 GHz, 512 MB Ram and 40 GH Hard Drive with Windows XP Professional operating system. Drawings files produced by scanning documents or records or containing photographic images shall be delivered in PDF. The specifications will be produced in PDF electronic digital files. Additionally, the contractor shall have the ability to deliver two or three-dimensional drawings in the AutoCAD software released 2004, or in MicroStation V8.5. The Government will only accept final documents found to be fully operational without conversion or reformatting. Responding firms must show computer and Internet capability for accessing the Criteria Bulletin Board System (CBBS) http://cbbs.spk.usace.army.mil/index.html and the Design Review and Checking System (DrChecks) https://www.projnet.org. Estimates shall be prepared using Corps of Engineers Computer Aided Cost Estimating system (M-CACES Second Generation MII) (software provided by Government) software; however training to use this software and the current pending Cost Book library will require purchasing by the Contractor. This work will include all Architectural-Engineering (A-E) and related services necessary to complete the assigned task orders for studies and designs. A specific scope of work will be issued with each task order. 3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Criteria" a" through "d" are primary. Criteria "e" through "f" are secondary and will only be used as tiebreakers among technically equal firms. a. Specialized Experience and technical competence in Specialized Experience and technical competence in will provide examples of not more than ten (10) projects completed within the last 5 years that best demonstrate specialized experience and technical competency in the areas listed below. Project examples submitted should be of completed projects. All projects cited must identify start/complete dates as well as the project size (cost and scope). Please also provide the percentage of work completed by the prime contractor. Prime Contractor's that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. 1. Capability and recent experience in Civil Works project studies and designs involving levees, floodwalls, dams, spillways, pumping stations, various mechanical gate structures, stilling basins, hydraulic flow control structures, bridges, buildings, infrastructure (road and utility) systems, operations and maintenance manuals, dam safety risk analyses, and flood damage reduction project/system risk based analysis. Experience with both feasibility/conceptual level design as well as design (plans and specification for construction) is preferred. 2. Capability and experience with services in support of design, such as acquisition of geotechnical (explorations), topographic and hydrographic survey, utility survey, material testing results, design reviews (quality control, constructability and Safety Assurance), economic analysis, environmental documents and assessment of environmental impacts, cost engineering (using MCACES), GIS and CADD/BIM capability. 3. Work experience within the South Pacific Division boundaries, and particularly inside the Sacramento District boundaries will be considered in determining the most highly qualified firms. b. Firms must demonstrate professional and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, certifications, registration, relevant experience and longevity with the firm of key technical personnel (3-year minimum is preferable). Project related experience of new employees with the firm will be considered. Experience in the discipline in which he/she will be working on should be identified. (SF 330, Part I, Sections E and G). Qualified professional personnel who are certified, registered and highly trained in the following key disciplines: Project Management, Civil, Structural, Electrical, Mechanical, Geotechnical, Architectural, Geology, Seismology, Hydraulic, Hydrology, Landscape Architect, Cost Engineering, Wetland Specialist, Topographic Surveys, Bathymetrics Surveys, LEED Accredited Professionals, Geographic Information Specialist, CADD/BIM (Revit) Operator, Environmental Specialist and Certified Industrial Hygienist (CIH). c. Past performance on Corps of Engineers, DOD and other contracts with respect to cost control, quality of work and compliance with performance schedule, as determined by CPARS/ACASS and other sources. Additionally, Past Performance Questionnaires (PPQ) may be used to provide or supplement a firm's past performance with other than U.S. Government clients. Firms which choose to use the PPQ may do so by using the attached PPQ form and providing it in your SF330. Past performance on project used to demonstrate specialized experience and technical competence will be weighed most heavily. d. Capacity to accomplish multiple simultaneous task orders at different locations within the required timeframe, including professional qualifications of firm's staff and subcontractors to be assigned to the projects which are necessary for satisfactory performance in the required time. Firms must demonstrate the capacity to accomplish multiple location simultaneously. e. SB and SDB Participation: [Defense PGI 236.602-1(a)(6)(C)] The extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team, measured as a percentage of the total estimated contract efforts, regardless of whether the SB, SDB, HCU or MI is a prime contractor, subcontractor or joint venture partner. The greater the participation, the greater the consideration. f. Volume of DOD contract awards received in the last 12 months. 4. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit an original and THREE (3) copies of the SF330 (03/2013) Part I, and an original and THREE (3) copies of the SF 330 Part II for the prime firm and all consultants/subcontracts including related services questionnaires regarding past performance on non-Government projects to the office shown below, ATTN: Contracting A-E Team. The SF 330 shall not exceed 200 single pages (100 pages if double sided) 8 ½ x 11, not counting the cover letter, table of contents or any dividing page used to identify each SF 330 Section. Font size will be 10 or 12 font in either Times New Roman, Arial or Courier. No more than (3) three 11 x 17 pages for organization charts. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc). In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy must be submitted electronically on a CD. Please include the CD in the original SF330 binder. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by the close of business (4:00 pm local time) the day of the closing date will be considered for selection. If the closing date is a Saturday, Sunday or Federal holiday, the deadline is the close of business on the next business day. No other notification will be made and no further action is required. Solicitation packages are not provided for A-E contracts. This is not a request for proposals. All responsible sources may submit the required SF 330 which will be considered by the agency. Contracting Office Address: US Army Corps of Engineers Attn: Contracting AE Team1325 J. Street Sacramento, CA 95814 5. OFFERORS QUESTIONS AND COMMENTS: Questions regarding this announcement must be in writing and addressed to Melissa DeNigris at Melissa.A.DeNigris@usace.army.mil and Carolyn Mallory at Carolyn.E.Mallory@usace.army.mil. All questions must be submitted no later than 16 May 2016 at 3:00 p.m., Pacific Standard Time (PST) to allow time for a response.  

Small Business Indefinite-Delivery Indefinite-Quantity (IDIQ) Architect-Engineer Contract for Surveying, Mapping and Geographic Information Systems (GIS) in Support of the South Pacific Division (SPD)

Department of the Army, U.S. Army Corps of Engineers | Published April 9, 2016  -  Deadline May 26, 2016
cpvs

1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. One (1) Small Business firm will be selected for negotiation based on demonstrated competence and qualifications for the required work. A-E services are required to provide Surveying, Mapping and GIS services for the Sacramento District. The types of surveys that may be ordered include, but are not limited to, automated hydrographic, conventional hydrographic, overbank, topographic, contour, planimetric, boundary, cadastral, data collection, LiDAR, easement and right-of-way location, ALTA/ACSM, construction layout, formwork verification, control surveys which may include GPS vertical surveys which conform to the National Geodetic Survey (NGS) specifications for blue-booking within the Sacramento district. A specific scope of work and services will be issued with each task order. This procurement will be conducted under FSC Code: C219; SIC Code: 8711; NAICS Code: 541370. The size standard for this code is $15,000,000.00. To be considered a Small Business under this NAICS Code, the respondent's average revenue for the last three fiscal years cannot be more than $15,000,000.00. One (1) Small Business contract will be negotiated and will be awarded within one year after the required response date to this announcement. Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contracts will be negotiated. These contracts will be for a period of performance of up to five (5) years, consisting of a base contract period of three (3) years and an option to extend the contract term by an additional two (2) years. This Single Award Task Order Contract (SATOC) will have a combined capacity of $5,000,000.00. The full $5,000,000.00 will be available for the base year and any remaining funds will carry over once the option year is exercised. The options may be exercised at the discretion of the Government. While this is a Small Business SATOC, there is a similar scope Unrestricted SATOC as well. Therefore, when determining if an Unrestricted or Small Business firm can perform the work, the Sacramento District will consider the Small Business firm first, before moving on to the Unrestricted SATOC. In making selection of the awardee to receive a specific task order, the Contracting Officer will consider past performance of previous task orders, quality of previous task orders, timeliness of previous task orders, cost control, the firm's strength and previous experience in relation to the work requirements and geographic location described in the statement of work for each task order. Details of the selection process will be included in the resultant contracts. All interested Architect-Engineers are reminded that in accordance with the provisions of FAR Sections 19.7, 52.219-8, 52.219-9 or equivalent DFARS Sections, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged business. The wages and benefits of service employees (see FAR 22.1) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to employee's office location (not the location of the work). To be eligible for contract award a firm or joint venture must be registered in the System for Award Management (SAM). Register via the Internet Site at https://www.sam.gov. Contractor Performance Evaluations: In accordance with the provisions of Subpart 36.604 (Performance Evaluation of the Federal Acquisition Regulation (FAR), A-E contractors performance shall be evaluated throughout the performance of the contract. The United States Army Corps of Engineers (USACE) follows the procedures outlined in Engineering Pamphlet (EP) 715-1-7 to fulfill this FAR requirement. Performance evaluations will be prepared in the Contractor Performance Assessment Reporting System (CPARS), which is a web-based system. The Architect-Engineer Contract Administration Support System (ACASS) was previously used, and CPARS is now the current platform. Engineering Pamphlet (EP) 715-1-7, Chapter 6 has not been updated, as yet to reflect this change. Past performance evaluations shall be prepared for each architect-engineer services contract of $35,000 or more. A final evaluation will be prepared for each task order exceeding $35,000.00. For this procurement, the evaluation shall be prepared after acceptance of the A-E product on each task order. Past performance evaluations may also be prepared for contracts below $35,000. After an evaluation (interim or final) is written up by the USACE, the contractor will have the ability to access, review and comment on the evaluation for a period of 30 days. Accessing and using CPARS requires specific software, called PKI certification, which is installed on the user's computer. The certification is a Department of Defense requirement and was implemented to provide security in electronic transaction. The certification software could cost approximately $100-$120 per certificate per year and is purchased from External Certificate Authorities (ECA) vendors. Current information about the PKI certification process and for contracting vendors can be found on the web site http://www.cpars.gov. If the contractor wishes to participate in the performance evaluation process, access to CPARS and PKI certification is the sole responsibility of the Contractor. 2. PROJECT INFORMATION: Typical task order surveys that may be ordered include, but are not limited to, automated hydrographic, conventional hydrographic, overbank, topographic, contour, planimetric, boundary, cadastral, data collection, LiDAR, easement and right-of-way location, ALTA/ACSM, construction layout, formwork verification, control surveys which may include GPS vertical surveys which conform to the National Geodetic Survey (NGS) specifications for blue-booking within the Sacramento district. Office assignments requested will include, but are not limited to the following: computing, compiling, verifying, plotting, mapping, constructing Bentley InRoads, AutoCAD and ESRI Grid Analyst compatible Digital Terrain Models (DTMs), constructing MicroStation DGN and AutoCAD DWG file drawings, digitizing hydrographic survey chart data, graphically depicting the collected survey data and certifying the resulting hard copy as a validity check, processing, filtering, and extraction of ground-based, terrestrial LiDAR data, creating LiDAR derived digital elevation models (DEMs) and associated visualization products adhering to the appropriate conventions and using the proper CAD Seed Files. Other office assignments may include researching titles and preparing abstracts for servitudes and right-of-way, preparing benchmark description PDFs and making PDFs of survey field books. Deliverables may include completed surveys certified by a registered Professional Land Surveyor via digital and hard copy products complying with the Spatial Data Standards (SDSFIE) for GIS and the A/E/C CAD Standards for CAD Products and submitted in the manner outlined in the most current versions of the USACE Engineering Manuals stated in section C-2 Technical Provisions of this scope of work. All survey data must be furnished electronically and delivered via mail with acceptable flash drive or a Contractor-provided secure File Transfer Protocol (FTP) Server or other Government specified electronic file transfer system and, in some instances, as a hard copy deliverable upon request. In accordance with each specific contract task order, the Contractor must have available at least one Professional Registered Land Surveyor registered in the state in which the work is being performed, one CAD Technician, two 3-person Survey Crews, and any other necessary personnel capable of performing of all types of field surveys as listed in Section C-1.a for the contract duration. There may be periods where several task orders may be active. Also, there may periods of little to no work. 3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Criteria" a" through "d" are primary. Criteria "e" through "f" are secondary and will only be used as tiebreakers among technically equal firms. a. Specialized Experience and technical competence in Specialized Experience and technical competence in will provide examples of not more than ten (10) projects completed within the last 5 years that best demonstrate specialized experience and technical competency in the areas listed below. Project examples submitted should be of completed projects. All projects cited must identify start/complete dates as well as the project size (cost and scope). Please also provide the percentage of work completed by the prime contractor. Prime Contractor's that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. 1. Capability and recent experience in photogrammetric compilation at scales ranging from 1 inch-20 feet to 1 inch-400 feet; digitized database mapping in Intergraph, AutoCAD and ARCMap (ArcView/ArcInfo) GIS compatible formats, analytical bridging; aerial photography; lab services; GPS and conventional field control (horizontal & vertical); field topographic survey at scales 1inch-20 feet to 1inch-50 feet; LIDAR and IFSAR and miscellaneous surveying services. 2. Experience in horizontal control surveys, vertical control surveys, GPS control surveys, topographic surveys, hydrographic surveys, boundary surveys, legal descriptions, photogrammetric mapping, GIS, analytical triangulation, orthophotos, aerial photography and lab processing. 3. Work will be within the South Pacific Division boundaries however significant work experience inside the Sacramento District boundaries will be considered in determining the most highly qualified firms. b. Firms must demonstrate professional and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, certifications, registration, relevant experience and longevity with the firm of key technical personnel (3-year minimum is preferable). Project related experience of new employees with the firm will be considered. Experience in the discipline in which he/she will be working on should be identified. Qualified professional personnel who are certified, registered and highly trained in the following key disciplines: Project Management, Civil, Structural, Electrical, Mechanical, Geotechnical, Architectural, Geology, Seismology, Hydraulic, Hydrology, Landscape Architect, Cost Engineering, Wetland Specialist, Topographic Surveys, Bathymetrics Surveys, LEED Accredited Professionals, Geographic Information Specialist, CADD/BIM (Revit) Operator, Environmental Specialist and Certified Industrial Hygienist (CIH). c. Past performance on Corps of Engineers, DOD and other contracts with respect to cost control, quality of work and compliance with performance schedule, as determined by CPARS/ACASS and other sources. Additionally, Past Performance Questionnaires (PPQ) may be used to provide or supplement a firm's past performance with other than U.S. Government clients. Firms which choose to use the PPQ may do so by using the attached PPQ form and providing it in your SF330. Past performance on projects used to demonstrate specialized experience and technical competence will be weighed most heavily. d. Capacity to accomplish multiple simultaneous task orders at different locations within the required timeframe, including professional qualifications of firm's staff and subcontractors to be assigned to the projects which are necessary for satisfactory performance in the required time. Firms must demonstrate the capacity to accomplish multiple location simultaneously. e. SB and SDB Participation: [Defense PGI 236.602-1(a)(6)(C)] The extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team, measured as a percentage of the total estimated contract efforts, regardless of whether the SB, SDB, HCU or MI is a prime contractor, subcontractor or joint venture partner. The greater the participation, the greater the consideration. f. Volume of DOD contract awards received in the last 12 months. 4. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit an original and THREE (3) copies of the SF330 (03/2013) Part I, and an original and THREE (3) copies of the SF 330 Part II for the prime firm and all consultants/subcontracts including related services questionnaires regarding past performance on non-Government projects to the office shown below, ATTN: Contracting A-E Team. The SF 330 shall not exceed 150 single pages (75 pages if double sided) 8 ½ x 11, not counting the cover letter, table of contents or any dividing page used to identify each SF 330 Section. Font size will be 10 or 12 font in either Times New Roman, Arial or Courier. No more than (3) three 11 x 17 pages for organization charts. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc). In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy must be submitted electronically on a CD. Please include the CD in the original SF330 binder. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by the close of business (4:00 pm local time) the day of the closing date will be considered for selection. If the closing date is a Saturday, Sunday or Federal holiday, the deadline is the close of business on the next business day. No other notification will be made and no further action is required. Solicitation packages are not provided for A-E contracts. This is not a request for proposals. All responsible sources may submit the required SF 330 which will be considered by the agency. Contracting Office Address: US Army Corps of EngineersATTN: Contracting AE Team1325 J. StreetSacramento, CA 95814 5. OFFERORS QUESTIONS AND COMMENTS: Questions regarding this announcement must be in writing and addressed to Melissa DeNigris at Melissa.A.DeNigris@usace.army.mil and Carolyn Mallory at Carolyn.E.Mallory@usace.army.mil. All questions must be submitted no later than 17 May 2016 at 3:00 p.m., Pacific Standard Time (PST) to allow time for a response.  

Unrestricted Indefinite-Delivery Indefinite-Quantity (IDIQ) Architect-Engineer Contract for Surveying, Mapping and Geographic Information Systems (GIS) in Support of the South Pacific Division (SPD)

Department of the Army, U.S. Army Corps of Engineers | Published April 9, 2016  -  Deadline May 26, 2016
cpvs

1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. One (1) Unrestricted firm will be selected for negotiation based on demonstrated competence and qualifications for the required work. A-E services are required to provide Surveying, Mapping and GIS services for the Sacramento District. The types of surveys that may be ordered include, but are not limited to, automated hydrographic, conventional hydrographic, overbank, topographic, contour, planimetric, boundary, cadastral, data collection, LiDAR, easement and right-of-way location, ALTA/ACSM, construction layout, formwork verification, control surveys which may include GPS vertical surveys which conform to the National Geodetic Survey (NGS) specifications for blue-booking within the Sacramento district. A specific scope of work and services will be issued with each task order. This procurement will be conducted under FSC Code: C219; SIC Code: 8711; NAICS Code: 541370. The size standard for this code is $15,000,000.00. One (1) Unrestricted contract will be negotiated and will be awarded within one year after the required response date to this announcement. A Firm Fixed Price (FFP), Indefinite Delivery Indefinite Quantity (IDIQ) contract will be negotiated. The contract will be for a period of performance of up to five (5) years, consisting of a base contract period of three (3) years and an option to extend the contract term by an additional two (2) years. This Single Award Task Order Contract (SATOC) will have a combined capacity of $9,800,000.00. The full $9,800,000.00 will be available for the base year and any remaining funds will carry over once the option years are exercised. The options may be exercised at the discretion of the Government. While this is an Unrestrited SATOC, there is a similar scope Small Business SATOC as well. Therefore, when determining if a Large or Small Business firm can perform the work, the Sacramento District will consider the Small Business firm first, before moving on to the Unrestricted SATOC. In making selection of the awardee to receive a specific task order, the Contracting Officer will consider past performance of previous task orders, quality of previous task orders, timeliness of previous task orders, cost control, the firm's strength and previous experience in relation to the work requirements and geographic location described in the statement of work for each task order. Details of the selection process will be included in the resultant contracts. All interested Architect-Engineers are reminded that in accordance with the provisions of FAR Sections 19.7, 52.219-8, 52.219-9 or equivalent DFARS Sections, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged business. The wages and benefits of service employees (see FAR 22.1) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to employee's office location (not the location of the work). If a large business firm is selected for one of these contracts, it will be required to submit a detailed subcontracting plan at a later date. A detailed plan is not required to be submitted with the SF 330; however, the plans to do so should be specified in block H of the SF 330. If a large business is selected it must comply with FAR 52-219.9 regarding the requirement to subcontract. Sacramento District's recommended goal for work intended to be subcontracted is 41.5% for small business. The goal further states that of the 40.08% to be subcontracted to small business, 21.69% is for small disadvantaged business (subset to small business), 7.33% is for small business/woman owned (subset to small business), 5.58% for HUBZone small business (subset to small business), 3.0% for veteran-owned small business and 4.97% is for service-disabled veteran-owned small business (subset to small business). If the selected firm submits a plan with lesser goals, it must submit written rationale of why the above goals are not met. Firms should indicate personnel and subcontracts selected to work on the contract and state their management structure. To be eligible for contract award a firm or joint venture must be registered in the System for Award Management (SAM). Register via the Internet Site at https://www.sam.gov. Contractor Performance Evaluations: In accordance with the provisions of Subpart 36.604 (Performance Evaluation of the Federal Acquisition Regulation (FAR), A-E contractors performance shall be evaluated throughout the performance of the contract. The United States Army Corps of Engineers (USACE) follows the procedures outlined in Engineering Pamphlet (EP) 715-1-7 to fulfill this FAR requirement. Performance evaluations will be prepared in the Contractor Performance Assessment Reporting System (CPARS), which is a web-based system. The Architect-Engineer Contract Administration Support System (ACASS) was previously used, and CPARS is now the current platform. Engineering Pamphlet (EP) 715-1-7, Chapter 6 has not been updated, as yet to reflect this change. Past performance evaluations shall be prepared for each architect-engineer services contract of $35,000 or more. A final evaluation will be prepared for each task order exceeding $35,000.00. For this procurement, the evaluation shall be prepared after acceptance of the A-E product on each task order. Past performance evaluations may also be prepared for contracts below $35,000. After an evaluation (interim or final) is written up by the USACE, the contractor will have the ability to access, review and comment on the evaluation for a period of 30 days. Accessing and using CPARS requires specific software, called PKI certification, which is installed on the user's computer. The certification is a Department of Defense requirement and was implemented to provide security in electronic transaction. The certification software could cost approximately $100-$120 per certificate per year and is purchased from External Certificate Authorities (ECA) vendors. Current information about the PKI certification process and for contracting vendors can be found on the web site http://www.cpars.gov. If the contractor wishes to participate in the performance evaluation process, access to CPARS and PKI certification is the sole responsibility of the Contractor. 2. PROJECT INFORMATION: Typical task order surveys that may be ordered include, but are not limited to, automated hydrographic, conventional hydrographic, overbank, topographic, contour, planimetric, boundary, cadastral, data collection, LiDAR, easement and right-of-way location, ALTA/ACSM, construction layout, formwork verification, control surveys which may include GPS vertical surveys which conform to the National Geodetic Survey (NGS) specifications for blue-booking within the Sacramento district. Office assignments requested will include, but are not limited to the following: computing, compiling, verifying, plotting, mapping, constructing Bentley InRoads, AutoCAD and ESRI Grid Analyst compatible Digital Terrain Models (DTMs), constructing MicroStation DGN and AutoCAD DWG file drawings, digitizing hydrographic survey chart data, graphically depicting the collected survey data and certifying the resulting hard copy as a validity check, processing, filtering, and extraction of ground-based, terrestrial LiDAR data, creating LiDAR derived digital elevation models (DEMs) and associated visualization products adhering to the appropriate conventions and using the proper CAD Seed Files. Other office assignments may include researching titles and preparing abstracts for servitudes and right-of-way, preparing benchmark description PDFs and making PDFs of survey field books. Deliverables may include completed surveys certified by a registered Professional Land Surveyor via digital and hard copy products complying with the Spatial Data Standards (SDSFIE) for GIS and the A/E/C CAD Standards for CAD Products and submitted in the manner outlined in the most current versions of the USACE Engineering Manuals stated in section C-2 Technical Provisions of this scope of work. All survey data must be furnished electronically and delivered via mail with acceptable flash drive or a Contractor-provided secure File Transfer Protocol (FTP) Server or other Government specified electronic file transfer system and, in some instances, as a hard copy deliverable upon request. In accordance with each specific contract task order, the Contractor must have available at least one Professional Registered Land Surveyor registered in the state in which the work is being performed, one CAD Technician, two 3-person Survey Crews, and any other necessary personnel capable of performing of all types of field surveys as listed in Section C-1.a for the contract duration. There may be periods where several task orders may be active. Also, there may periods of little to no work. 3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Criteria" a" through "d" are primary. Criteria "e" through "f" are secondary and will only be used as tiebreakers among technically equal firms. a. Specialized Experience and technical competence in will provide examples of not more than ten (10) projects completed within the last 5 years that best demonstrate specialized experience and technical competency in the areas listed below. Project examples submitted should be of completed projects. All projects cited must identify start/complete dates as well as the project size (cost and scope). Please also provide the percentage of work completed by the prime contractor. Prime Contractor's that do not have specific experience in the following types of tasks will be evaluated based on their subcontractors' experience. However, projects where the prime performed 50% or more of the work with in-house forces will be weighted more heavily than projects performed predominantly by proposed subcontractors. 1. Capability and recent experience in photogrammetric compilation at scales ranging from 1 inch-20 feet to 1 inch-400 feet; digitized database mapping in Intergraph, AutoCAD and ARCMap (ArcView/ArcInfo) GIS compatible formats, analytical bridging; aerial photography; lab services; GPS and conventional field control (horizontal & vertical); field topographic survey at scales 1inch-20 feet to 1inch-50 feet; LIDAR and IFSAR and miscellaneous surveying services. 2. Experience in horizontal control surveys, vertical control surveys, GPS control surveys, topographic surveys, hydrographic surveys, boundary surveys, legal descriptions, photogrammetric mapping, GIS, analytical triangulation, orthophotos, aerial photography and lab processing. 3. Work will be within the South Pacific Division boundaries however significant work experience inside the Sacramento District boundaries will be considered in determining the most highly qualified firms. b. Firms must demonstrate professional and specialized experience for key disciplines. Evaluation of professional qualifications will consider education, training, certifications, registration, relevant experience and longevity with the firm of key technical personnel (3-year minimum is preferable). Project related experience of new employees with the firm will be considered. Experience in the discipline in which he/she will be working on should be identified. Qualified professional personnel in the following key disciplines: at least one Professional Registered Land Surveyor registered in the state in which the work is being performed, one CAD Technician, two 3-person Survey Crews, and any other necessary personnel capable of performing of all types of field surveys. c. Past performance on Corps of Engineers, DOD and other contracts with respect to cost control, quality of work and compliance with performance schedule, as determined by CPARS/ACASS and other sources. Additionally, Past Performance Questionnaires (PPQ) may be used to provide or supplement a firm's past performance with other than U.S. Government clients. Firms which choose to use the PPQ may do so by using the attached PPQ form and providing it in your SF330. Past performance on project used to demonstrate specialized experience and technical competence will be weighed most heavily. d. Capacity to accomplish multiple simultaneous task orders at different locations within the required timeframe, including professional qualifications of firm's staff and subcontractors to be assigned to the projects which are necessary for satisfactory performance in the required time. Firms must demonstrate the capacity to accomplish multiple location simultaneously. e. SB and SDB Participation: [Defense PGI 236.602-1(a)(6)(C)] The extent of participation of small or disadvantaged businesses, or woman-owned small businesses, and participation of historically black colleges and universities or minority institutions in the proposed contract team, measured as a percentage of the total estimated contract efforts, regardless of whether the SB, SDB, HCU or MI is a prime contractor, subcontractor or joint venture partner. The greater the participation, the greater the consideration. f. Volume of DOD contract awards received in the last 12 months. 4. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit an original and THREE (3) copies of the SF330 (03/2013) Part I, and an original and THREE (3) copies of the SF 330 Part II for the prime firm and all consultants/subcontracts including related services questionnaires regarding past performance on non-Government projects to the office shown below, ATTN: Contracting A-E Team. The SF 330 shall not exceed 150 single pages (75 pages if double sided) 8 ½ x 11, not counting the cover letter, table of contents or any dividing page used to identify each SF 330 Section. Font size will be 10 or 12 font in either Times New Roman, Arial or Courier. No more than (3) three 11 x 17 pages for organization charts. Font size for tables, figures or charts is at the discretion of the submitter, but it must be legible and large enough to be easily read by the reviewer. In block D of the SF 330, provide the quality management plan and organization chart for the proposed team. In block E of the SF 330 provide resumes for all key team members, whether with the prime firm or a subcontractor; list specific project experience for key team members; and indicate the team members role on each listed project (i.e. project manager, design engineer, etc). In block H of the SF 330 indicate the number and amount of fees awarded on DoD (Army, Navy, and Air Force) contracts during the 12 months prior to this notice, including change orders and supplemental agreements for the submitting office only. A task specific quality control plan must be prepared and approved by the Government as a condition of contract award, but is not required with this submission. In addition to all the hard copies of the SF 330s and attachments, ONE (1) additional copy must be submitted electronically on a CD. Please include the CD in the original SF330 binder. The most highly qualified firm(s) may be required to provide in-person presentations prior to final selection and will be advised accordingly. Responses received by the close of business (4:00 pm local time) the day of the closing date will be considered for selection. If the closing date is a Saturday, Sunday or Federal holiday, the deadline is the close of business on the next business day. No other notification will be made and no further action is required. Solicitation packages are not provided for A-E contracts. This is not a request for proposals. All responsible sources may submit the required SF 330 which will be considered by the agency. Contracting Office Address: US Army Corps of EngineersATTN: Contracting AE Team1325 J Street Sacramento, CA 95814 5. OFFERORS QUESTIONS AND COMMENTS: Questions regarding this announcement must be in writing and addressed to Melissa DeNigris at Melissa.A.DeNigris@usace.army.mil and Carolyn Mallory at Carolyn.E.Mallory@usace.army.mil. All questions must be submitted no later than 17 May 2016 at 3:00 p.m., Pacific Standard Time (PST) to allow time for a response.