Public tenders for business in North-aviation-blvd-el-segundo-ca United States

Find all Business tenders in the world.
Finding business opportunities has never been easier.

Results for business. Make a new search!
BusinessUnited Statesnorth-aviation-blvd-el-segundo-ca

70 -- Serena Business Manager Support Renewal

Department of the Navy, Space and Naval Warfare Systems Command | Published January 11, 2016  -  Deadline January 15, 2016
cpvs

IF YOU ARE A SMALL BUSINESS AND CAN PROVIDE A QUOTE, PLEASE DO SO. This will be an all or none based award. The Government will accept quotes from all responsible sources with the capability to provide the brand name or equal product cited and will award a contract resulting from this RFQ-16-Q-0410 to the responsible vendor whose offer conforms to the solicitation and is considered to be most advantageous to the Government. An equal must be an exact equal and will require approval by the originator prior to award. All part numbers must be manufacturer's part numbers. All quotes must include the delivery lead time after award of contract. All items must be on contract at time of submission. All quotes MUST state whether or not the items quoted are TAA compliant. If the quote does not state whether the items are TAA compliant or not, the quote will be rendered incomplete and will not be used. Vendors must be registered in the Wide Area Work Flow (WAWF). If you are not registered, your quote may be refused. Please keep your SAM updated. Please include your CAGE code on your quote. UID labels are required for all items with a unit price of $5,000.00 or over (MIL-STD-130N W/Change 1, 15-JUN-07). Quote is due to: Sean Johnson, Contract Specialist, SPAWARSYSCEN, Atlantic, by 1/15/2016 Eastern Standard. The government will accept proposals/quotes via email at Sean.Johnson@navy.mil. PLEASE REFER TO THIS EMAIL ADDRESS IF YOU HAVE QUESTION OR CONCERNS ABOUT THE SOLICITION RFQ-16-Q- 0410. The Government will not pay for any information received.

Brand Name or Equivalent, Xvivo X3 Cell incubation and processing workstation � Small Business Set-Aside.

Department of Health and Human Services, National Institutes of Health | Published August 28, 2015  -  Deadline September 4, 2015
cpvs

Brand Name or Equivalent, Xvivo X3 Cell incubation and processing workstation - Small Business Set-Aside. Contracting Office Address: Department of Health and Human Services, National Institutes of Health, National Cancer Institute, Office of Acquisitions, 9609 Medical Center Drive, Room 1E140, Rockville, MD 20850, UNITED STATES. I. DESCRIPTION OF REQUIREMENT The National Cancer Institute (NCI), Center for Cancer Research (CCR), Urologic Oncology Branch (UOB), has a requirement to procure a brand name Xvivo X3 Cell incubation and processing workstation from Biospherix, or equivalent. The system will allow lab scientists to perform a broad range of assays, such as metabolites assays, necessary to validate the data obtained from our collaborators. Thus the acquisition of this workstation is critical to identify in a timely manner to validate lead therapeutic compounds for pre-clinical trials. The system must match or exceed the specifications and performance criteria needed for the UOB's research This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Only one award will be made as a result of this solicitation. This will be awarded as a firm fixed price type contract and will be awarded to the lowest priced technically acceptable quotation from a small business. The following salient characteristics shall be provided: 1) Be an integrated, digital O2/CO2, pressure & temperature controlled incubation and processing chamber that are controlled by a separate, independent gas supply. Allowing for different conditions at the same time. 2) Have ability to have more than one independent incubator with more than one protocol running at the same time, in the same closed system. 3) The workstation must have control of normobaric gas oxygen tensions to within 0.1% over the full 0.1-99.9% range in the incubation chambers. 4) Inside of workstation, incubation chamber must open into matched O2, CO2 and temperature controlled gloved work chamber. 5) Have soft, comfortable glove fronts with an extra-large pass-thru air-lock chamber and heated stainless steel critical working surfaces in the process chamber. 6) Allow modular design for easy upgrade and to fit any process. Add more incubation and processing in the future if required. 7) Have Built-in HEPA filtration (Class 100 achievable). 8) Able to attach PC and touch-screen software control of all cell parameters for easy documentation and recording. Ability to export data and program multiple setpoints. 9) Have Dynamic oxygen and CO2 controls available for ischemia/reperfusion modeling. 10) Provide active humidity control in incubators and processing chambers. 11) Able to add custom designed chambers to fit UOB's lab room size requirements. 12) The system must be capable of being field-upgradeable for all Measurement Technologies post sale. 13) Include at a minimum a standard 1 year part and labor warranty. 14) Be easily integrated into a full robotic system and easily adaptable to fit sample processing requirements. 15) Able to incubate of samples in a microplate, flasks muti-well plates. 16) Allow for the standard curves, using a known extinction coefficient to calculate directly from measurements. 17) Able to account for oxygen sensor error. 18) The vendor must provide comprehensive training. II. DELIVERY Contractor(s) shall deliver to NIH/NCI Bethesda, Maryland 20892 within 90 days after award. The Contractor who receives the award will be provided with the complete mailing address and point of contact. Upon delivery, contractor must notify the NCI Contracting Officer's Representative (COR) to schedule the installation and training dates. III. INSTALLATION AND TRAINING. To be carried out by the manufacturer after the delivery. The Contractor shall provide comprehensive training after installation IV. PAYMENT Payment shall be made after delivery, installation, and successful operation of the equipment. Payment authorization requires submission and approval as per the Invoice Instructions that are available upon request and will be part of the Order. V. PROVISIONS AND CLAUSES The following provisions and clauses will be incorporated: FAR 52.211-6 Brand Name or Equal (a) If an item in this solicitation is identified as quote mark brand name or equal, quote mark the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that quote mark equal quote mark products must meet are specified in the solicitation. (b) To be considered for award, offers of quote mark equal quote mark products; including quote mark equal quote mark products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate quote mark equal quote mark products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an quote mark equal quote mark product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) 52.212-1 Instruction to Offerors Commercial Items (April 2014) 52.212-2, Evaluation Commercial Items: The purchase order will be awarded to the Lowest Price Technically Acceptable (LPTA). The award will be made on the basis of the lowest evaluated price of quotations meeting or exceeding the acceptability standards for the requirements/technical specifications stated above. The technical evaluation will be a determination based on information furnished by the vendor. The Government is not responsible for locating or securing any information which is not identified in the proposal. The Government reserves the right to make an award without discussions. The Government reserves the right to award on all or none basis. 52.212-3 Offerors Representations and Certifications Commercial Items (Mar 2015) 52.212-4 Contract Terms and Conditions Commercial Items (December 2014), applies to this acquisition. 52.212-5 Contract terms and Conditions Required to Implement Statutes or Executive Orders---Commercial Items (April 2015). The following additional FAR clauses cited in this clause are applicable: (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S .C. 2402) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (41 U.S.C. 3509) 52.204-10 Reporting Executive Compensation and First Tier Subcontract Awards (JUL 2013) (Pub.L. 109-282) (31 U.S.C. 6101 note). 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (AUG 2013) (31 U.S.C. 6101 note). 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (JUL 2013) (41 U.S.C. 2313). 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). 52.219-8 Utilization of Small Business Concerns (OCT 2014) (15 U.S.C. 637 (d) (2) and (3). 52.219-28 Post Award Small Business Program Representation (JUL 2013) (15 U.S.C. 632(a) (2)). 52.222-3 Convict Labor (JUNE 2003) (E.O. 11755). 52.222-19 Child Labor Cooperation with Authorities and Remedies (JAN 2014) (E.O. 13126). 52.222-21 Prohibition of Segregated Facilities (FEB 1999) 52.222-26 Equal Opportunity (MAR 2007) (E.O. 11246). 52.222-35 Equal Opportunity for Veterans (JUL 2014) (38 U.S.C. 4212). 52.222-36 Affirmative Action for Workers with Disabilities (JUL 2014) (29 U.S.C. 793). 52.222-37 Employment Reports on Veterans (JUL 2014) (38 U.S.C. 4212). 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (AUG 2011)(E.O. 13513). 52.225-1 Buy American Act - Supplies (MAY 2014) (41 U.S.C. chapter 83). 52.225-3 Buy American Act--Free Trade Agreements--Israeli Trade Act (MAY 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, Pub. L. 108-77, 108-78, 108-286, 108-302 109-53, 109-169, 109-283, 110-138, Pub. L.112-41, 112-42 and 112-43). 52.225-5 Trade Agreements (NOV 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). 52.225-13 Restrictions on Certain Foreign Purchase (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33 Payment by Electronic Funds Transfer System for awards Management (JUL 2013) (31 U.S.C. 3332). 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.246-2 Inspection of Supplies-Fixed Price. 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). VI. HOW TO SUBMIT A RESONSE Please refer to the solicitation number N02CO52700-78 on all correspondence. Quotations must be received by September 4, 2015 at 10 a.m. EDT via E-mail at Francisco.mendoza@nih.gov. All questions shall be in writing and may be addressed to Francisco Mendoza at the aforementioned E-mail noted above by September 2, 2015 at 9 a.m. EDT. No collect calls will be accepted. In order to receive an award, the contractor must be registered and have valid certification in the Central Contractor Registration (CCR) and the Online Representation and Certifications Applications (ORCA) through sam.gov.

Dump Truck Bed 2001 Freightline Model FL70

Department of the Army, National Guard Bureau | Published September 12, 2016  -  Deadline September 16, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in Federal Acquisition Regulation (FAR) subpart12.6, "Streamlined Procedures for Evaluation and Solicitation for CommercialItems," using Simplified Acquisition Procedures under FAR part 13 assupplemented with additional information included in this notice. Thisannouncement constitutes the only solicitation; quotations are beingrequested.This solicitation is a request for quotations (RFQ). The solicitation documentand incorporated provisions and clauses are those in effect through FederalAcquisition Circular (FAC) 2005-88 The associated North American IndustrialClassification System (NAICS) code for this procurement is 336120, with asmall business size standard of $7.5M.Please see the attched solicitation W912TF-16-T-0032-U0001.  This announcement will close September 16, 2016 at 4PM EST. Submit all quotes to Cynthia Thompson via email to cynthia.thompson2.mil@mail.mil. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency.  Any questions or conerns regarding this solicitation should be forwarded to Cynthia Thompson via email to cynthia.thompson2.mil@mail.mil.

Notice of Release of Space and Missile Systems Center (SMC) Technical Support (STS-2) Final Task Order Request for Proposal #FA8810-14-F-0009 for the Remote Sensing Systems Directorate (SMC/RS) and Responses to Comments on (SMC/RS) STS-2 2nd Draft RFP

Department of the Air Force, Air Force Space Command | Published August 20, 2015  -  Deadline January 27, 2015
cpvs

SMC/RS intends to award under the OASIS Small Business (SB) contract, Pool 5B (the SB size standard for NAICS 541712, Exception C is 1,000 employees), a Firm Fixed Price Task Order for technical services. The Classification Code is: R - Professional, Administrative and Management Support. The final solicitation is anticipated for release on or after 20 August 2015. The final solicitation will be issued via a global email that will be sent to OASIS SB Pool 5B vendors. If you are interested in subcontracting opportunities, contact the OASIS SB Pool 5B Contract Holders directly. This notice also provides industry with the attached consolidated comment resolution matrix (CRM) for Space and Missile Systems Center (SMC) Technical Support (STS-2), for the Remote Sensing (RS) Systems Directorate (SMC/RS) under the GSA OASIS Small Business Contract (Pool 5B). The consolidated CRM includes responses to comments/questions received to the updated draft STS-2 TO-RFP posted to the Federal Business Opportunities website on 13 May 2015. This notice is for informational and planning purposes only and is not to be construed as a commitment by the Government. This is not a solicitation announcement. All questions pertaining to this announcement should be addressed to either the Primary Point of Contact (Ms. Cathy Butler, phone: (310) 653-2146, email: Cathy.Butler@us.af.mil), or the Secondary Point of Contact (Mr. Jonathan Shultz, phone: (310) 653-2236, email: Jonathan.Shultz.3@us.af.mil). An Ombudsman has been appointed to address concerns from potential Offerors during the proposal development phase of this acquisition. The Ombudsman does not diminish the authority of the Program Director or Contracting Officer, but communicates contractor concerns, issues, disagreements, and recommendations to the appropriate Government personnel. When requested, the Ombudsman shall maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ms. Olalani Kamakau, SMC/PKC, at (310) 653-1185.

Statement of Intent to Sole Source two Delta Heavy Launches to ULS

Department of the Air Force, Air Force Space Command | Published December 7, 2015
cpvs

This is a PRE-SOLICITATION NOTICE for information purposes and a statement of intent issued by the Launch Enterprise Directorate (LE) at the Space and Missile Systems Center (SMC). The Department of the Air Force, Space and Missile Systems Center (SMC) issues this notice to award a sole source contract to United Launch Services, LLC, for launch services for two Delta IV Heavy launch vehicles with an anticipated award date of 1st Quarter Fiscal Year 2018 and with anticipated launch quarters of 3rd Quarter Fiscal Year 2021 and 4th Quarter Fiscal Year 2022. This service includes the manufacture, test, and transportation of the launch vehicles to the designated launch site. The locations of performance are Centennial, Colorado; Decatur, Alabama; and Cape Canaveral Air Force Station, Florida. Any persons or companies interested in providing Evolved Expendable Launch Vehicle (EELV) class launch services consistent with the launch schedule are to respond to the requirements and submit a statement of their capabilities. This posting will be augmented with a classified notice of each mission's launch vehicle interface requirements on the National Reconnaissance Office's Acquisition Research Center (ARC) 2.0 website. This is not a small business set-aside. The NAICS code for this effort is 481212 and the small business size standard is 1,500 employees. Classification code V applies. Contractors interested in subcontracting opportunities are encouraged to contact United Launch Services directly. This notice is for information and planning purposes only; it does not constitute a Request for Proposal. Any response to this notice is not an offer and cannot be accepted by the Government to form a binding contract. The Government will not recognize any cost associated with the submission of a Statement of Capability. A determination by the Government not to open the requirement to competition based upon the responses to this notice is solely within the discretion of the Government. Response from qualified small and small disadvantaged business is encouraged. Matters pertaining to this notification may be directed to Ms. Silvia Jackman at silvia.jackman@us.af.mil or to Mr. David Sharp at david.sharp.5@us.af.mil.

Laundry and Linen Services

Department of the Air Force, Air Force Space Command | Published August 18, 2016  -  Deadline September 2, 2016
cpvs

Price will be evaluated on the LPTA process based on the lowest overall evaluated price. The Government intends to evaluate quotes and award a contract without discussions with offerors. This requirement is being issued as a 100% small business set-aside. The NAICS Code is 812331 - "Linen Supply" and the Small Business Size Standard is $32.5M. To be considered for this award, offerors must be registered in the System for Award Management (SAM) database at www.sam.gov. Lack of registration will make an offeror ineligible for award. This notice does not obligate the Government to award the contract; it does not restrict the Government's ultimate approach; nor does it obligate the Government to pay for any quote/proposal preparation costs. The Government reserves the right to cancel this solicitation, either before or after the closing date for receipt of quotes. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. 1. DESCRIPTION/QTY:CLIN 0001: Inventory (Start-Up) Services Base YearDescription: The objective of Inventory (Start-Up) is to provide a start-up quantity of clean uniforms, linen, and racks for customer (Health Care Worker (HCW)) use. Therefore the Contractor shall: Provide clean uniforms (Scrubs and Lab Coats), linens, and racks for HCW use. See Appendix - A for colors and initial quantities that will be put into cleaning rotations. Quantity: 1 LOT Period of Performance (PoP): 15 September 2016 - 14 September 2017 CLIN 0002: Cleaning Rotations Services Base YearDescription: The objective of Cleaning Rotations is to circulate items that have become soiled to prevent the transmission of disease from patient to patient, patient to HCW, or HCW to patient. Therefore the Contractor shall: The Contractor shall track (i.e. record), pick-up soiled items, and deliver clean items (paragraph 1.2.1.) to the 61st Medical Group, Building 210 twice each week on Tuesday and Friday, accordance with accordance with AFI 44-108 paragraph 3.11.2.- 3.11.9 and with no more than three (3) customer complaints per quarter. Delivered finished articles shall be free of stains, neatly packaged, and match the quantities recorded for pick-up. Quantity: 12 Months Period of Performance (PoP): 15 September 2016 - 14 September 2017 CLIN 1001: Inventory (Start-Up) Services Services Option Year One Description: The objective of Inventory (Start-Up) is to provide a start-up quantity of clean uniforms, linen, and racks for customer (Health Care Worker (HCW)) use. Therefore the Contractor shall: Provide clean uniforms (Scrubs and Lab Coats), linens, and racks for HCW use. See Appendix - A for colors and initial quantities that will be put into cleaning rotations. Quantity: 1 LOT Period of Performance (PoP): 15 September 2017 - 14 September 2018 CLIN 1002: Cleaning Rotations Services Option Year One Description: The objective of Cleaning Rotations is to circulate items that have become soiled to prevent the transmission of disease from patient to patient, patient to HCW, or HCW to patient. Therefore the Contractor shall: The Contractor shall track (i.e. record), pick-up soiled items, and deliver clean items (paragraph 1.2.1.) to the 61st Medical Group, Building 210 twice each week on Tuesday and Friday, accordance with accordance with AFI 44-108 paragraph 3.11.2.- 3.11.9 and with no more than three (3) customer complaints per quarter. Delivered finished articles shall be free of stains, neatly packaged, and match the quantities recorded for pick-up. Quantity: 12 Months Period of Performance (PoP): 15 September 2017 - 14 September 2018 CLIN 2001: Inventory (Start-Up) Services Option Year Two Description: The objective of Inventory (Start-Up) is to provide a start-up quantity of clean uniforms, linen, and racks for customer (Health Care Worker (HCW)) use. Therefore the Contractor shall: Provide clean uniforms (Scrubs and Lab Coats), linens, and racks for HCW use. See Appendix - A for colors and initial quantities that will be put into cleaning rotations. Quantity: 1 LOT Period of Performance (PoP): 15 September 2018 - 14 September 2019 CLIN 2002: Cleaning Rotations Services Option Year One Description: The objective of Cleaning Rotations is to circulate items that have become soiled to prevent the transmission of disease from patient to patient, patient to HCW, or HCW to patient. Therefore the Contractor shall: The Contractor shall track (i.e. record), pick-up soiled items, and deliver clean items (paragraph 1.2.1.) to the 61st Medical Group, Building 210 twice each week on Tuesday and Friday, accordance with accordance with AFI 44-108 paragraph 3.11.2.- 3.11.9 and with no more than three (3) customer complaints per quarter. Delivered finished articles shall be free of stains, neatly packaged, and match the quantities recorded for pick-up. Quantity: 12 Months Period of Performance (PoP): 15 September 2018 - 14 September 2019 CLIN 3001: Inventory (Start-Up) Services Option Year Three Description: The objective of Inventory (Start-Up) is to provide a start-up quantity of clean uniforms, linen, and racks for customer (Health Care Worker (HCW)) use. Therefore the Contractor shall: Provide clean uniforms (Scrubs and Lab Coats), linens, and racks for HCW use. See Appendix - A for colors and initial quantities that will be put into cleaning rotations. Quantity: 1 LOT Period of Performance (PoP): 15 September 2019 - 14 September 2020 CLIN 3002: Cleaning Rotations Services Option Year One Description: The objective of Cleaning Rotations is to circulate items that have become soiled to prevent the transmission of disease from patient to patient, patient to HCW, or HCW to patient. Therefore the Contractor shall: The Contractor shall track (i.e. record), pick-up soiled items, and deliver clean items (paragraph 1.2.1.) to the 61st Medical Group, Building 210 twice each week on Tuesday and Friday, accordance with accordance with AFI 44-108 paragraph 3.11.2.- 3.11.9 and with no more than three (3) customer complaints per quarter. Delivered finished articles shall be free of stains, neatly packaged, and match the quantities recorded for pick-up. Quantity: 12 Months Period of Performance (PoP): 15 September 2019 - 14 September 2020 CLIN 4001: Inventory (Start-Up) Services Option Year Four Description: The objective of Inventory (Start-Up) is to provide a start-up quantity of clean uniforms, linen, and racks for customer (Health Care Worker (HCW)) use. Therefore the Contractor shall: Provide clean uniforms (Scrubs and Lab Coats), linens, and racks for HCW use. See Appendix - A for colors and initial quantities that will be put into cleaning rotations. Quantity: 1 LOT Period of Performance (PoP): 15 September 2020 - 14 September 2021 CLIN 4002: Cleaning Rotations Services Option Year One Description: The objective of Cleaning Rotations is to circulate items that have become soiled to prevent the transmission of disease from patient to patient, patient to HCW, or HCW to patient. Therefore the Contractor shall: The Contractor shall track (i.e. record), pick-up soiled items, and deliver clean items (paragraph 1.2.1.) to the 61st Medical Group, Building 210 twice each week on Tuesday and Friday, accordance with accordance with AFI 44-108 paragraph 3.11.2.- 3.11.9 and with no more than three (3) customer complaints per quarter. Delivered finished articles shall be free of stains, neatly packaged, and match the quantities recorded for pick-up. Quantity: 12 Months Period of Performance (PoP): 15 September 2020 - 14 September 2021 2. QUOTES DUE DATE: QUOTES ARE DUE 02 September 2016 @ 12:00 hrs. Pacific Standard Time (PST). QUOTES RECEIVED AFTER DUE DATE WILL NOT BE USED IN THE AWARD SELECTION PROCESS. 3. POINT OF CONTACT: Interested parties capable of providing the specified services must submit a written offer only via email to: Teri Contreras, Contract Specialist, at theresa.contreras@us.af.mil and Mr. Dalice Va, Contracting Officer, at Dalice.Va@us.af.mil A pre-proposal conference is not scheduled for this site. Offerors shall submit any questions relating to the solicitation to the Contract Specialist and Contracting Officer. Questions for this action shall be made only in writing to the email address provided in the Point of Contact Information; no telephone calls will be accepted. All questions must be received by 26 August 2016 @ 12:00 hrs. Pacific Standard Time (PST). Questions received after this date may potentially not be answered due to time constraints of the solicitation. 4. PLACE OF PERFORMANCE Los Angeles Air Force Base (LAAFB), El Segundo, California. 5. ADDITIONAL INFORMATION: NOTES: a. Complete all representations and certifications electronically at the following website: https://sam.gov. If not completed on-line, Offerors must include with their written quote a completed of the provisions at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Dec 2014), which can be obtained at http://farsite.hill.af.mil, FAR Part 52 or online at https://sam.gov/ b. Provide Tax ID, Cage Code, DUNS, and Discount Terms. c. Payments will be processed via electronic funds transfer (EFT). d. Contractor is liable for the ACCURACY of submitted quote(s) and for any incurred costs if quote(s) was submitted erroneously. 6. CONTRACT TERMS AND CONDITIONS: The following provisions/clauses apply: PROVISIONS INCORPORATED BY REFERENCE 52.212-1 Instructions to Offerors--Commercial Items OCT 2015(Contractor may use their own format to submit quote) 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 PROVISIONS INCORPORATED BY FULL TEXT 52.212-2 -- Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:This contract will be awarded to the offeror with the lowest price technically acceptable quote.(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.(End of Provision)52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Apr 2016)The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision.(a) Definitions. As used in this provision--"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Forced or indentured child labor" means all work or service-(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c)."Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies;(3) PSG 88, Live Animals;(4) PSG 89, Subsistence;(5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;(8) PSC 9610, Ores;(9) PSC 9620, Minerals, Natural and Synthetic; and(10) PSC 9630, Additive Metal Materials."Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;(3) Consist of providing goods or services to marginalized populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;(5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended.Sensitive technology-(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3))."Service-disabled veteran-owned small business concern"-(1) Means a small business concern-(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16)."Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation."Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that--(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned-(1) Directly by a parent corporation; or(2) Through another subsidiary of a parent corporation."Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances."Veteran-owned small business concern" means a small business concern-(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and(2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern --(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website.(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 1 LOT, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.](c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:___________________________________________(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(d) Representations required to implement provisions of Executive Order 11246 --(1) Previous contracts and compliance. The offeror represents that --(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and(ii) It [_] has, [_] has not, filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that --(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.)(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."(2) Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(g)(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product."Other Foreign End Products:LINE ITEM NO. COUNTRY OF ORIGIN[List as necessary](iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Canadian End Products:Line Item No.:___________________________________________[List as necessary](3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act'':Canadian or Israeli End Products:Line Item No.: Country of Origin:[List as necessary](4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No.: Country of Origin:[List as necessary](5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements."(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.Other End ProductsLine Item No.: Country of Origin:[List as necessary](iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--(1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and(3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and(4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(i) Taxes are considered delinquent if both of the following criteria apply:(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.(ii) Examples.(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).](1) Listed End ProductListed End Product: Listed Countries of Origin:(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.][_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.[_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-(1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States.(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.](1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that-(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.(2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that-(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and(iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.(3) If paragraph (k)(1) or (k)(2) of this clause applies-(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.(l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)(1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).(2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.(3) Taxpayer Identification Number (TIN).[_] TIN:_____________________.[_] TIN has been applied for.[_] TIN is not required because:[_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;[_] Offeror is an agency or instrumentality of a foreign government;[_] Offeror is an agency or instrumentality of the Federal Government;(4) Type of organization.[_] Sole proprietorship;[_] Partnership;[_] Corporate entity (not tax-exempt);[_] Corporate entity (tax-exempt);[_] Government entity (Federal, State, or local);[_] Foreign government;[_] International organization per 26 CFR 1.6049-4;[_] Other ____________________.(5) Common parent.[_] Offeror is not owned or controlled by a common parent:[_] Name and TIN of common parent:Name ____________________________________TIN ______________________________________(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.(n) Prohibition on Contracting with Inverted Domestic Corporations-(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.(2) Representation. The offeror represents that-(i) It [ ] is, [ ] is not an inverted domestic corporation; and(ii) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.(1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov.(2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-(i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf).(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and(ii) The offeror has certified that all the offered products to be supplied are designated country end products.(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation.(1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.(2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information:Immediate owner CAGE code:_____________________________________________Immediate owner legal name:______________________________________________(Do not use a "doing business as" name)Is the immediate owner owned or controlled by another entity:[ ] Yes or [ ] No.(3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:Highest level owner CAGE code:_____________________________________________Highest level owner legal name:______________________________________________(Do not use a "doing business as" name)(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub.

Simplified Acquisition of Base Engineer Requirements (SABER)

Department of the Air Force, Air Force Space Command | Published September 12, 2016
cpvs

  The Department of the Air Force, Air Force Space Command (AFSPC), Space and Missile Systems Center (SMC), Operational and Integration Division (PKE), intends to issue a solicitation for a competitive 100% Section 8(a) set-aside to Small Business Administration (SBA) Certified firms. This is the pre-solicitation synopsis for the anticipated single award, firm-fixed-price (FFP), indefinite-delivery/indefinite-quantity (IDIQ) contract for Simplified Acquisition of Base Engineer Requirements (SABER) at Los Angeles Air Force Base (LAAFB) in El Segundo, California (CA), and Camp Parks in Dublin, CA. LAAFB sites include Fort MacArthur, Pacific Heights, and Pacific Crest in San Pedro, CA, and Defense Contract Management Agency (DCMA) in Carson, CA. Each individual construction project will be awarded by issuing individual delivery orders against the basic contract on an as-needed basis. The contractor shall be required to furnish all materials, equipment, and personnel necessary to design, procure, manage, and accomplish the requirement. Projects will be in support of real property maintenance, repair, alteration, and new construction. The specific description of work will be identified in each individual delivery order. The delivery orders will include tasks in a variety of trades, including but not limited to: tenant improvement, carpentry, civil, excavation, electrical, plumbing, sheet metal, painting, demolition, concrete, masonry, interior/exterior signage, welding, heating, ventilation, air conditioning (HVAC), telecommunication, lead and asbestos abatement, and office furniture removal. The North American Industry Classification System (NAICS) code is 236220, and the size standard for this NAICS code is $36.5M. IAW FAR 36.204 - Disclosure of the Magnitude of Construction Projects, the estimated contract value is "More Than $10,000,000.00" over a maximum contract length of five years and six months. The expected award shall consist of one base period of performance and may include up to four optional periods of performance, with an additional six month option to extend services. The Government intends to issue the solicitation as a SBA Certified 8(a) set aside. It has been determined that competition will be limited to 8(a) firms located within the geographical area serviced by the SBA Los Angeles District Office, and other 8(a) construction firms with a bona fide place of business within the geographical competitive area, and the assigned NAICS code. All other 8(a) Business Development (BD) Participants are deemed ineligible to submit offers. The Government anticipates evaluation factors to be subjective using the trade off process IAW FAR Part 15.101-1, resulting in the best value to the Government. Evaluation factors will be set forth in Sections L & M of the solicitation. It is anticipated the solicitation will be issued electronically in Autumn 2016 on the Federal Business Opportunities (FedBizOpps) web page under solicitation number FA2816-16-R-0008. Paper copies will not be available. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to any and all documents. The deadline for proposals will be identified in the solicitation. The Government intends to award an initial Seed Project as the first delivery order. The Seed Project will be identified in the solicitation. The Government intends to hold a site visit for this solicitation. The exact date and time will be identified in the solicitation. No response to this announcement is being requested at this time. The Government will not pay for any information submitted in response to this announcement. The solicitation subsequent to this announcement may be cancelled. After solicitation, and prior to award, the possibility exists to reject all offers when cancellation is clearly in the public interest. This announcement does not obligate the Government to pay for any bid/proposal preparation costs. All prospective contractors must be registered in the System for Award Management (SAM) database in order to be eligible for award. Registration requires applicants to have a Data Universal Numbering System +4 (DUNS+4). Registration may take up to three weeks to process. It is recommended to register immediately in order to be eligible for award. The FAR requires the use of the SAM database in federal solicitations as part of the proposal submission process. All prospective contractors submitting an offer in response to the subject solicitation must go to https://www.sam.gov/ to add or update records in SAM.  

EMIS III Shield Suite Material

Department of the Navy, Naval Air Systems Command | Published April 14, 2016  -  Deadline April 19, 2016
cpvs

The Naval Air Systems Command has a requirement to manufacture EMIS III components in the F/A-18 APG-73 Radar System due to obsolescence. The Navy intends to negotiate the effort as a sole source order to the F/A-18 and EA-18G Basic Ordering Agreement with Raytheon Company, El Segundo, CA. Award of the order will be made with the authority under FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. As the prime contractor and original designer of the APG-73 Radar, Raytheon has the manufacturing knowledge, experience and technical data required to fulfill this requirement. This notice of intent is not a request for competitive proposals. Interested parties may identify their interest and submit technical information and a technical capability statement in response to this notice. Responses without a return address, mailing address and company telephone number will not be recognized. No phone calls will be accepted. Proprietary data in the responses will be protected where so designated. Offerors must be registered in the Central Contractor Registration database to be eligible for contract award or payment from any DoD activity. A determination not to compete this proposed effort based on responses to this notice is solely within the discretion of the Government. For small business and subcontracting opportunities, contact Raytheon's Supplier Diversity Advocate, Nancy Howard, 1200 South Jupiter Road, Garland, TX 75042. Ph: 972.205.4993 or e-mail at sas.supplier.diversity@raytheon.com.

ECP6381 GPP3 GPC LoTB

Department of the Navy, Naval Air Systems Command | Published May 3, 2016  -  Deadline May 18, 2016
cpvs

  The Naval Air Systems Command intends to issue a fixed-price sole source order to the F/A-18 and EA-18G Basic Ordering Agreement with Raytheon Company, El Segundo, CA to address General Purpose Controller (GPC) obsolescence issues.   The effort includes a Life of Type Buy which is needed for ECP6381 GPP3 Config D kit upgrades of USN F-18 RADARs.    Award of the order will be made with authority under FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. As the prime contractor for the AN/APG-79 RADARs, Raytheon has the manufacturing knowledge, experience, and technical data required to fulfill this requirement. This notice of intent is not a request for competitive proposals. Interested parties may identify their interest and submit technical information and a technical capability statement in response to this notice. Responses without a return address, mailing address, and company telephone number will not be recognized. No phone calls will be accepted. Proprietary data in the responses will be protected where so designated. Offerors must be registered in the Central Contractor Registration (CCR) database to be eligible for contract award or payment from any DoD activity. A determination not to compete this proposed effort based on responses to this notice is solely within the discretion of the Government. For small business or subcontracting opportunities, contact Raytheon at (310) 616-1683. See Numbered Note 22.

United States Air Force EELV Rocket Propulsion System Prototypes

Department of the Air Force, Air Force Space Command | Published June 2, 2015  -  Deadline June 23, 2015
cpvs

The Space and Missile Systems Center (SMC), Launch Systems Directorate (LR), Los Angeles Air Force Base, CA Systems Program Office is releasing a Request for Proposals (RFP) for EELV Phase 2 Rocket Propulsion System (RPS) Prototypes. The RFP is included as attachments to this announcement. Please note that Industry's comments from the draft RFP have been responded to and can be found in the Phase 2 bidders' library. Interested contractors may request access to the Bidder's Library by emailing the Agreements Officer and must obtain and sign a Non-disclosure Agreement prior to being granted access to the Bidder's Library. All information in the Bidder's Library is at the unclassified level. Response from small business is encouraged. Proposals must be submitted to this office no later than 23 June 2015 at 0900 Pacific Time in accordance with instructions outlined in subject solicitation. Questions in reference to this RFP must only be addressed to the Agreements Officer. DISCLAIMERS AND NOTES The Aerospace Corporation, a Federally Funded Research and Development Center, may be involved in reviewing proposals submitted by offerors. In this capacity, the Aerospace Corporation is bound by appropriate non-disclosure agreements with the Government. For further information regarding these agreements, contact the Agreements Officer identified below. POINTS OF CONTACT: Primary: David Sharp SMC/LRK Agreements Officer david.sharp.5@us.af.mil Secondary: Silvia Jackman SMC/LRK Contracting Specialist silvia.jackman@us.af.mil Technical POC: Maj William Britton SMC/LRX 310-653-0611 william.britton@us.af.mil Backup Technical POC: Kathryn Parks SMC/LRX 310-653-3375 kathryn.parks@us.af.mil

Relocate the existing wall enclosure between the M-1 Room and the Control Operation Room and to construct new offices in the M-1 Room area in the Control Wing First Floor of the LA ARTCC in Palmdale, CA

Department of Transportation, Federal Aviation Administration (FAA) | Published January 22, 2016  -  Deadline February 3, 2016
cpvs

It is strongly recommended that interested vendors check the FAA’s Contracting Opportunities (FAACO) website at http://faaco.faa.gov frequently for any updates and amendments to this announcement. Also, if this announcement is being viewed from other than FAACO, some information/attachments may not transfer correctly. Therefore, only the information/attachments provided at FAACO are considered the official source of information on this requirement. The purpose of this announcement is to notify industry that the Federal Aviation Administration (FAA)intends to release the forthcoming Screening Information Request (SIR) Request for Offer (RFO) as an unrestricted open competitive procurement. The responses to this market survey will be used for information purposes only. This is not a screening information request for proposals of any kind. The FAA is not seeking or accepting unsolicited proposals. The FAA will not pay for any information received or costs incurred associated in preparation or in response to this market survey.Therefore any cost associated with the market survey submission is solely at the interested vendors expense. Requirement Description: The FAA is seeking to obtain market information from offerors to relocate the existing wall enclosure between the M-1 Room and the Control Operation Room and to construct new offices in the M-1 Room area in the Control Wing First Floor of the Los Angeles Air Route Traffic Control Center located in Palmdale, CA. The Los Angeles ARTCC Control Wing First Floor is currently in need of renovation and modernization. This project will be performed at a facility that will remain open and operational throughout the project, providing continuous 24/7 Air Traffic Control operations. It is paramount that Air Traffic Control operations and security restrictions be considered and addressed in the execution of any work, to prevent adverse impact to the mission of the facility. This project includes but is not limited to and incidental related work: A. Construction work consists of the following: 1.Demolish existing smoke wall enclosure and double door separating M-1 Room area and the Control Room and replace new wall enclosure and new double doors on the M Gridline towards the M-1 Room, approximately 14’-5” from existing wall enclosure. 2.Removal of existing acoustical ceiling grid, lights and mechanical system, 3.Extend the raised floor in the Control Room to the new wall location. 4.Construct a new office, approximately 1,000 square foot area with a new 9 foot dropped acoustical ceiling with light fixtures and mechanical diffusers and returns in the M-1 Room area. 5.Construct new offices utilizing the existing 14 foot high ceiling. 6.Furnish and install new duct smoke detector to each new offices and interface with existing Johnson Controls fire alarm system. 7.Furnish and install new electrical and lighting system. B. Work Phases - The Work shall be conducted in two phases in the following order: Work Phase No. 1 The new relocated Control Room wall is to be constructed with all work complete including electrical on both side prior to the removal of the existing wall separating the Control Room from the M-1 Room Area. The only exception to this is the installation of the new raised floor on the Control Room side of the wall. Work of this phase shall be complete with operational testing complete and accepted or substantially complete prior to any work on the existing Control Room wall. Work Phase No. 2 Construct a Dust Partition in the Control Room from floor to ceiling. Demolish the existing partition between the Control Room and the M-1 Room area. After demolition is complete, remove the Dust Partition and install new raised floor steps and guard rails. In order to make this determination and be considered responsive, interested offerors must complete and submit the attached Business Declaration Form to elsa.gonzalez@faa.gov by 4:30 PM PDT on 02/03/2016. “This notice is for informational purposes for Minority, Women Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has a program to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals and women owned concerns to acquire short-term working capital assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at the prime interest rate to provide accounts receivable financing. The maximum line of credit is $750,000.00. For further information and applicable forms concerning the STLP, call the OSDBU at (800) 532-1169” If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/23460 to view the original announcement.

Evidence Destruction

Department of Justice, Drug Enforcement Administration | Published March 21, 2016  -  Deadline March 28, 2016
cpvs

The U.S. Department of Justice, Drug Enforcement Administration (DEA) intends to issue fixed price Purchase Order for evidence destruction. This Request for Quotation (RFQ) is being issued as a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written RFQ is attached. This RFQ does not commit the government to pay any cost incurred in the submission of a quotation or to award a contract for these services. It is also noted that the Contracting Officer is the only individual who may legally commit the Government to the expenditure of public funds in connection with this procurement. RFQ number: DJD-16-Q-0015 proposed procurement method is Full and Open competition. The applicable North American Industry Classification System Code (NAICS) is 562213, "Solid Waste Combustors and Incinerators" and the Small Business Size Standard is $38,500,000.00. This RFQ document and incorporated provisions and clauses are those in effect through Federal Acquisitions Circular FAC 2005-87-1 issued 03/196/2016. The Government anticipates award of a single, firm-fixed price Purchase Order, based on Lowest Price, Technically Acceptable. All quotes will be evaluated. This acquisition incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at https://www.acquisition.gov. All questions regarding this RFQ should be directed to Nanaesi Amoo at nanaesi.amoo@usdoj.gov by March 25, 2016 at 3:00 pm EST. The quotation must be received March 28,2016, at 10:00 am EST. The quotation shall be submitted via email to the Contract Specialist designated herein and refrenced below. Offerors may also submit an additional quotation for the consideration for the establishment of a competitive Blanket Purchase Agreement for the above referenced services.

LODGING EL SEGUNDO, CA

Department of the Army, Army Contracting Command | Published December 7, 2015  -  Deadline December 14, 2015
cpvs

The US Army Contracting Command - New Jersey, Warfighter Support (ACC-NJ-WS) on behalf of the 78th Legal Operations Detachment (LOD) has a requirement for Lodging Services in El Segundo, CA. The Government intends to issue a solicitation as a 100% Small Business Set-Aside for this requirement. The Government will select for award the proposal(s) that are most advantageous and meet the best value requirements of the Government. The intended contract award will be Firm Fixed Price. The anticipated award date for this action is 2nd Quarter of Fiscal Year 2016. NOTES: A point of contact (POC) will be given for any necessary site visits at issuance of a formal solicitation. Please note that this notice does not constitute a Request for Proposal (RFP). All responsible sources may submit a capability statement, proposal, or quotation, which will be considered by the Government following the release of an official solicitation. This notice is not a solicitation and does not obligate the Government to issue a solicitation, nor will the Government be liable for any costs involved for submission of information in response to this notice. Release of an official solicitation is anticipated to occur in mid to late December 2015. Interested parties are encouraged to monitor FedBizOpps for the release of the solicitation. Point of contact for this action is Anthony Pavese, Contract Specialist, ACC-NJ-WS, anthony.r.pavese.civ@mail.mil. This procurement is North American Industry Classification System (NAICS) 721110 Size Standard $32,500,000. Place of Performance will be near: Los Angeles Air Force Base located in 200 N. Douglas St. El Segundo, CA 90245 All responses to this pre solicitation notice shall be in writing; NO TELEPHONE INQUIRES WILL BE ACCEPTED. Point of Contact: Anthony.R.Pavese.civ@mail.mil

Synopsis for AESA Depot Config D Upgrade (Raytheon)

Department of the Navy, Naval Air Systems Command | Published June 25, 2015  -  Deadline July 10, 2015
cpvs

The Naval Air Systems Command has a requirement for the Active Electronically Scanned Array (AESA) APG-79 Radar commercial depot Configuration "D" AN/APG-79B(V)1 upgrade. Capacity shall be sufficient to support a planned Fleet incremental upgrade of the APG-79 fielded systems to support a total of 574 planned systems under a two-level O to OEM maintenance concept with depot support operations. The Navy intends to negotiate the effort as a sole source order to the F/A-18 and EA-18G Basic Ordering Agreement with Raytheon Company, El Segundo, CA. Award of the order will be made with authority under FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. As the prime contractor for the AN/APG-65, -73 and -79 RADARs, Raytheon has the manufacturing knowledge, experience, and technical data required to fulfill this requirement. This notice of intent is not a request for competitive proposals. Interested parties may identify their interest and submit technical information and a technical capability statement in response to this notice. Responses without a return address, mailing address, and company telephone number will not be recognized. No phone calls will be accepted. Proprietary data in the responses will be protected where so designated. Offerors must be registered in the Central Contractor Registration (CCR) database to be eligible for contract award or payment from any DoD activity. A determination not to compete this proposed effort based on responses to this notice is solely within the discretion of the Government. For small business or subcontracting opportunities, contact Raytheon at (310) 616-1683. The contracting officer is: Mr. John Britt, john.britt@navy.mil (301) 757-5940; the contract specialist is LCDR Jason Morgan, jason.a.morgan@navy.mil (301) 757-7042.

EMIS III Shield Suite

Department of the Navy, Naval Air Systems Command | Published November 3, 2014  -  Deadline November 18, 2014
cpvs

The Naval Air Systems Command has a requirement to qualify composite material utilized in the manufacture of the EMIS III Shield Suite used in the F/A- 18 E/F APG -73 Legacy Radar Antenna (P/N 3525031-155), the APG-73 Radar Rack (P/N 3525078-120) and the Aircraft Radome Assembly (P/N 74A311048-1017 due to obsolescence. The Navy intends to negotiate the effort as a sole source order to the F/A-18 and EA-18G Basic Ordering Agreement with Raytheon Company, El Segundo, CA. Award of the order will be made with the authority under FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. As the prime contractor and original designer of the APG-73 Radar, Raytheon has the manufacturing knowledge, experience and technical data required to fulfill this requirement. This notice of intent is not a request for competitive proposals. Interested parties may identify their interest and submit technical information and a technical capability statement in response to this notice. Responses without a return address, mailing address and company telephone number will not be recognized. No phone calls will be accepted. Proprietary data in the responses will be protected where so designated. Offerors must be registered in the Central Contractor Registration database to be eligible for contract award or payment from any DoD activity. A determination not to compete this proposed effort based on responses to this notice is solely within the discretion of the Government. For small business and subcontracting opportunities, contact Raytheon's Supplier Diversity Advocate, Nancy Howard, 1200 South Jupiter Road, Garland, TX 75042. Ph: 972.205.4993 or e-mail at sas.supplier.diversity@raytheon.com. See Numbered Note 22.

Global Positioning System III (GPS III) Space Vehicles 11+ Phase 1 Production Readiness Feasibility Assessment Notice of Solicitation

Department of the Air Force, Air Force Space Command | Published January 8, 2016  -  Deadline February 23, 2016
cpvs

The Space and Missile Systems Center (SMC), Global Positioning Systems Directorate (GP) is releasing the Request for Proposal (RFP) for the Global Positioning System III (GPS III) Space Vehicles 11+ Phase 1 Production Readiness Feasibility Assessment. The RFP, FA8807-15-R-0003, is included in the Phase 1 Bidder's Library along with additional sensitive RFP documents. Interested contractors may request access to the Bidder's Library by emailing the point of contact listed below and must obtain and sign a non-disclosure agreement prior to being granted access to the Bidder's Library. Some information in the Bidder's Library is classified and will require appropriate security clearances for individuals accessing the information. Proposals must be submitted to this office no later than 23 February 2016 at 1700 Pacific Standard Time in accordance with instructions outlined in Section L of the RFP. Questions in reference to this RFP must only be addressed to the undersigned Contracting Officer and may be posted and shared with other offerors. Responses from small and small disadvantaged businesses are highly encouraged. The North American Industry Classification System (NAICS) code for this effort is 336414. The small business size standard is 1000 employees. The proposed period of performance for this effort is 26 months for the basic contract, and two options for 6-months each, for a total possible period of performance of 38 months. Disclaimers and Notes The following companies/organizations may be involved in reviewing the proposal provided: Federally Funded Research and Development Centers (The Aerospace Corp) and Systems Engineering and Technical Assistance (SETA) contractor Canyon Consulting, BTAS, Array Information Technology and TASC Inc.; all are bound by appropriate non-disclosure agreements with the Government. For further information regarding these agreements, contact the Contracting Officer identified below. This notice is for information purposes only and the Government will not recognize any cost associated with submission of information in response to this or previous notices. Submit all inquiries or responses to this notice to the Procurement Contracting Officer, Roy D. Lee. Email: Roy.Lee.11@us.af.mil. Mailing Address: SMC/GPK Attn: Roy D. Lee, 483 N. Aviation Blvd., Los Angeles Air Force Base, El Segundo, California 90245-2808.

AESA Hardware Depot Kits

Department of the Navy, Naval Air Systems Command | Published February 28, 2015  -  Deadline March 16, 2015
cpvs

The Naval Air Systems Command has a requirement to procure Hardware Depot kits for the Active Electronically Scanned Array (AESA) Radar. These kits will increase the processing capability of the AESA Radar. The kits will support the General Purpose Processor 3 (GPP3) Engineering Change Proposal (ECP) 6381 for Recurring Engineering (RE), ECP 6346 RE, which supports the incorporation of the Waveform Generator (WFG) Module, and kits to support 5th & 6th Channel Wiring and Hardware, ECP 6344 RE, which supports the incorporation of wiring, receiver modules, and Pre-Processor Modules (PPM). The GPP module supports additional capability requirements to the AN/APG-79 AESA Radar for the F/A-18 and EA-18G aircraft. The new Waveform Generator configuration provides additional growth potential capabilities for possible future Engineering Change Proposals on the F/A-18. The Navy intends to negotiate the effort as a Cost Plus Fixed Fee (CPFF) effort with Raytheon Company, El Segundo, CA. Award of the contract will be made with authority under FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. As the prime contractor for the AN/APG-65 and -73 RADARs, Raytheon has the manufacturing knowledge, experience, and technical data required to fulfill this requirement within program cost and schedule constraints. This notice of intent is not a request for competitive proposals. Interested parties may identify their interest and submit technical information and a technical capability statement in response to this notice. Responses without a return address, mailing address, and company telephone number will not be recognized. No phone calls will be accepted. Proprietary data in the responses will be protected where so designated. Offerors must be registered in the Central Contractor Registration (CCR) database to be eligible for contract award or payment from any DoD activity. A determination not to compete this proposed effort based on responses to this notice is solely within the discretion of the Government. For small business or subcontracting opportunities, contact Benita Fortner, the Raytheon Corporate Liaison Officer Representative at (781) 522-6337. You may also contact Raytheon Supplier Diversity at (310) 616-1683. See Numbered Note 22.

Protestant Religious Education Services

Department of the Air Force, Air Force Space Command | Published November 17, 2014  -  Deadline December 1, 2014
cpvs

U.S. DEPARTMENT OF DEFENSE U.S. AIR FORCE-SMC/PKE REQUEST FOR QUOTE A. GENERAL INFORMATION The Space and Missile Systems Center (SMC), 61st ABW/HC has a requirement for new Protestant Religious Education Services. This is a streamlined combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This notice constitutes the only notice. A written solicitation will not be issued. Solicitation FA2816-15-T-0001 is issued as a "Request for Quote". This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Circular 2005-61, Defense Circular Number 20120906, and Air Force Acquisition Circular 2012-0330. Award will be made to the contractor who meets the indicated specifications in addition to the attached Statement of Work (SOW) of this solicitation in accordance to guidance from the Department of Labor, Wage Determination List (Service Act of 1965 - (SCA) and it will be to the Lowest Price Technically Accepted (LPTA). This proposed contract is being considered as a set-aside under the small business set-aside program. The NAICS Code is 813110 and the Size Standard $7.5M. The government is interested in all small businesses that are interested in performing this requirement. This procurement will be awarded under Simplified Acquisition Procedures utilizing FAR Part 13. A Firm Fixed Price award will be made in accordance with the tentative schedule described in the description section of this solicitation. 1. DESCRIPTION/QTY: The service consist of the purchase of Protestant Religious Education services to perform all Worship service and Administrative tasks and functions for The Los Angeles AFB (LAAFB) as defined in this Statement of Work (SOW). LAAFB includes Fort MacArthur, Pacific Heights and Pacific Crest located in the city of San Pedro. The quantity of this requirement will consist in a base year following with four 1-year options as indicated in the below estimated schedule: a) Base Year contract: - Period of Performance (PoP): 15 Dec 2014 - 30 April 2015 b) Option Exercise One: - Period of Performance (PoP): 01 May 2015 - 30 April 2016 c) Option Exercise Two: - Period of Performance (PoP): 01 May 2016 - 30 April 2017 d) Option Exercise Three: - Period of Performance (PoP): 01 May 2017 - 30 April 2018 e) Option Exercise Four: - Period of Performance (PoP): 01 May 2018 - 30 April 2019 2. QUOTES DUE DATE: QUOTES ARE DUE 01 December 2014 @ 10:00 hrs Pacific Standard Time (PST). QUOTES RECEIVED AFTER DUE DATE WILL NOT BE USED IN THE AWARD SELECTION PROCESS. This procurement will be awarded under Simplified Acquisition Procedures. 3. POINT OF CONTACT: Responses to this request for quote shall be provided only in writing via e-mail to: Capt James Dunn at james.dunn.24@us.af.mil and/or Mr. Dalice Va at dalice.va@us.af.mil Questions for this action shall be made only in writing to the email address provided in the Point of Contact Information; no telephone calls will be accepted. The cutoff date for questions is 26 November 2014 @ 12:00 hrs Pacific Standard Time (PST). 4. PLACE OF PERFORMANCE Los Angeles Air Force Base address: 483 N. Aviation Blvd, El Segundo, CA 90245 - Ft MacArthur Facility: Pacific Avenue and 30th Street, San Pedro, CA 90731-9100 5. ADDITIONAL INFORMATION: NOTES: a. Supplies are for delivery FOB destination. b. Provide Tax ID, Cage Code, DUNS, and Discount Terms. c. Payments will be processed via electronic funds transfer (EFT). d. Contractor is liable for the ACCURACY of submitted quote(s) and for any incurred costs if quote(s) was submitted erroneously. 6. CONTRACT TERMS AND CONDITIONS: The following provisions/clauses apply: PROVISIONS INCORPORATED BY REFERENCE 52.212-3 Offeror Representations and Certifications--Commercial Items (On-line Representations and Certifications will be pulled) NOV 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 PROVISIONS INCORPORATED BY FULL TEXT 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vfdfara.htm (End of Provision) CLAUSES INCORPORATED BY REFERENCE 52.204-7 52.204-7 Alt I 52.204-10 System for Award Management System for Award Management -Alternate I Reporting Executive Compensation and First-Tier Subcontract Awards JUL 2013 JUL 2013 JUL 2013 52.212-1 52.212-4 52.217-5 52.217-8 52.217-9 52.219-6 52.219-28 52.222-42 Inspection of Services - Fixed Price Contract Terms and Conditions--Commercial Items - Evaluation of Options Option to Extend Services Option to Extend the Term of the Contract Notice to Total Small Business Set-Aside Post-Award Small Business Program Representation Statement of Equivalent Rates for Federal Hires AUG 1996 MAY 2014 JUL1990 NOV 1999 MAR 2000 NOV 2011 JULY 2013 (May 1989) 52.222-3 52.222-19 Convict Labor Child Labor -- Cooperation with Authorities and Remedies JUN 2003 JAN 2014 52.222-21 52.222-26 52.222-41 52.222-43 52.222-50 52.223-17 52.223-18 52.225-13 52.225-25 52.232-18 52.232-19 52.232-23 Prohibition of Segregated Facilities Equal Employment Opportunity Service Contract Labor Standards Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) Combat Trafficking in Persons Affirmative Procurement of EPA-Designated Items in Service and Construction Contracts Encouraging Contractor Policies to Ban Text Messaging While Driving Restrictions on Certain Foreign Purchases Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. Availability of Funds Availability of Funds for the Next Fiscal Year Assignment of Claims FEB 1999 MAR 2007 MAY 2014 MAY 2014 FEB 2009 MAY 2008 AUG 2011 JUN 2008 DEC 2012 APR 1984 APR 1984 MAY 2014 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration JUL 2013 52.233-3 Protest After Award AUG 1996 52.233-4 52.243-1 Alt I 52.244-6 52.249-4 Applicable Law for Breach of Contract Claim Changes - Fixed Price Subcontracts for Commercial Items Termination for Convenience of the Government (Services) OCT 2004 APR 1984 JUL 2014 APR 1984 252.203.7000 252.203-7002 252.204-7003 Requirements Relating to Compensation of Former DoD Officials Requirement to Inform Employees of Whistleblower Rights Control of Government Personnel Work Product JAN 2009 JAN 2009 APR1992 252.232-7003 252.232-7007 Electronic Submission of Payment Requests and Receiving Reports Limitation of Government's Obligation MAR 2008 MAY 2006 252.232-7008 Assignment of Claims (Overseas) JUN 1997 252.232-7010 Levies on Contract Payments DEC 2006 252.247-7023 Transportation of Supplies by Sea (Alt 1) MAY 2002 CLAUSES INCORPORATED BY FULL TEXT 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAR 2012) (DEVIATION) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (iii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities (iv) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.) (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.) (xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately-Owned U.S.- Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil https://www.acquisition.gov (End of clause) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUNE 2012) (a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5) (OCT 2010) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: 252.237-7010 252.237-7019 Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). 252.247-7003 Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Public Law 110-417) 252.247-7023 Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631) 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631) (End of clause) 5352.201-9101 OMBUDSMAN (APR 2010) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMBC A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact The Los Angeles Air Force Base (LAAFB), Ms. Olalani Kamakau, olalani.kamakau@us.af.mil, (310) 653-1185. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU or AFISRA level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. 7. CONTRACTING OFFICE ADDRESS: 483 N. Aviation Blvd El Segundo, CA 90245-2808 United States 8. PLACE OF PERFORMANCE: Los Angeles Air Force Base address: 483 N. Aviation Blvd, El Segundo CA 90245-2808 Ft MacArthur Facility: Pacific Avenue and 30th Street, San Pedro, CA 90731-9100 United States 9. PRIMARY POINT OF CONTACT: Capt James Dunn, Contract Negotiator james.dunn.24@us.af.mil 10. SECONDARY POINT OF CONTACT: Dalice Va, Contracting Officer Dalice.va@us.af.mil

Vexar Tubing and Wood Stake

Department of Agriculture, Forest Service | Published January 20, 2016  -  Deadline February 4, 2016
cpvs

Link To Document Total Small Business US 57730 Custer County Custer, SC

Scale Models

Department of the Air Force, Air Force Space Command | Published September 1, 2016  -  Deadline September 14, 2016
cpvs

The Space and Missile Systems Center (SMC) 61st Air Base Group ABG/History Office has a requirement for Scale Models for the Los Angeles Air Force Base (LAAFB) Heritage Center located in El Segundo, California. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This requirement is issued as a "Request for Quote" (RFQ). The basis for award will be the Lowest Price Technically Acceptable source selection process; the contract will be awarded to the responsible offeror whose quote conforms to this synopsis/solicitation and is determined to be the lowest priced among those quotes found to be technically acceptable. Technically acceptable means meeting all the requirements of the Statement of Work (SOW), brand name or equal. This requirement is being issued as a 100% small business set-aside. The NAICS Code is 339930 -"Doll, Toy and Game Manufacturing" and the Small Business Size Standard is 500 employees. Product or Service Code is 7820. This procurement will be awarded under Simplified Acquisition Procedures utilizing FAR 13.302 - Purchase orders. A Firm Fixed Price award will be made in accordance with the tentative schedule described in the description section of this solicitation. 1. CONTRACT LINE ITEMS (CLINs): CLIN 0001: See Attachment CLIN 0002: See AttachmentCLIN 0003: See Attachment CLIN 0004: See Attachment CLIN 0005: See AttachmentCLIN 0006: See Attachment CLIN 0007: See Attachment CLIN 0008: See Attachment CLIN 0009: See Attachment CLIN 0010: See Attachment 2. QUOTES DUE DATE: QUOTES ARE DUE 14 September 2016 @ 12:00pm Pacific Standard Time (PST). QUOTES RECEIVED AFTER DUE DATE WILL NOT BE USED INTHE AWARD SELECTION PROCESS. 3. POINT OF CONTACT:Interested parties capable of providing the specified requirements must submit a written offer via email to: Capt Whitney Alston, Contract Specialist, at whitney.alston@us.af.mil. Offerors shall submit any questions relating to the solicitation to the Contract Specialist by 08 September 2016 @ 2:00pm Pacific Standard Time (PST). Questions received after this date may potentially not be answered due to time constraints of the solicitation. 4. ADDITIONAL INFORMATION:  a. Complete all representations and certifications electronically at the following website:http s://sam .go . If not completed on-line, Offerors must include with their written quote a completed copy of the provisions at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Dec 2014), which can be obtained athttp :// farsite.hill.af .mil, FAR Part 52 or online at https://sam.gov/b. Provide Tax ID, Cage Code, DUNS, and Discount Terms.c. Payments will be processed via electronic funds transfer (EFT).d. Contractor is liable for the ACCURACY of submitted quote(s) and for any incurred costs. 5. CONTRACT TERMS AND CONDITIONS:The following provisions/clauses apply: PROVISIONS:a) Provision 52.204-16, Commercial and Government Entity Code Reporting (Jul 2016)b) Provision 52.212-1, Instructions to Offerors -- Commercial Items (Oct 2015)- Submit signed and dated offer to the Primary Contact specified in this solicitation at or before the exact time specified in this solicitation. Offeror must show --(1) The solicitation number;(2) The name, address, and telephone number of the offeror;(3) Price in terms of unit price, unit of issue, total and total overall price;(4) Terms of any express warranty;(5) Any discount or Prompt Payment terms;(6) Lead Time;(7) A completed copy of the representations an certifications at FAR 52.212-3 (see FAR 52.212- 3(b) for those representations and certifications that the offeror shall complete electronically);c) Provision 52.212-2, Evaluation - Commercial Items (Oct 2014)- This contract will be awarded to the offeror with the lowest price technically acceptable quoted) Provision 52.212-3, Offeror Representations and Certifications -- Commercial Items (Dec 2014)- Complete all representations and certifications electronically at the following website: https://sam.gov/- If not completed on-line, Offerors must include a completed copy of the provisions, which can be obtained at http://farsite.hill.af.mil, FAR Part 52e) Provision 52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998)As prescribed in 52.107(a), insert the following provision: Solicitation Provisions Incorporated by Reference (Feb 1998)This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): www.farsite.hill.af.milt) Provision 252.203-7005, Representation Relating to Compensation of Former DoD Officials (Nov 2011) CLAUSES:a) Clause 252.204-7011, Alternative Line Item Structure (Sept 2011)b) Clause 52.204-18, Commercial and Government Entity Code Maintenance (Jul 2016)c) Clause 52.204-19, Incorporation by Reference of Representations and Certifications (Dec 2014)d) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items (May 2015)e) Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (Deviation 2013-00019) (Jun 2016)- Applies to this acquisition, along with 52.222-50 Combating Trafficking in Persons (Mar 2015t) Clause 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011)g) Clause 52.252-2, Clauses Incorporated by Reference (Feb 1998)This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.milh) Clause 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011)i) Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Jun 2012)j) Clause 252.232-7006, Wide Area WorkFlow Payment Instructions (May 2013)k) Clause 252.232-7010, Levies on Contract Payments (Dec 2006)1) Clause 252.244-7000, Subcontracts for Commercial Items and Commercial Components (DoD Contracts) (Jun 2013)m) Clause 5352.201-9101, Ombudsman (Jun 2016)For purposes of this clause, the fill-ins are completed as follows:(c) Ifresolution cannot be made by the contracting officer, concerned parties may contact the MAJCOM ombudsman: LAAFB SMC/PK483 N. Aviation Blvd. El Segundo, CA 90245 Ms. Olalani Kamakauolalani.kamakau@us. af.mil Phone: (310) 653-1185Fax: (310) 653-6117
Categories
  United StatesNorth-aviation-blvd-el-segundo-ca - Show all cities
North charleston, sc (376)Rockville md 20852 (74)Marine corps base camp pendleton ca 92055-5191 (73)Mcclellan, ca (68)Camp pendleton, ca (63) rockville md 20852 (52)Fort riley, ks 66442 (41)Street miami, fl (34)Camp pendleton, ca (23)Schriever afb, co (22)Clairmont road decatur, ga (21)El paso, tx (21)North little rock, ar (21)Fort riley, ks (20)Fort riley, ks 66442 (18)El reno, ok (17)Jefferson plaza ne albuquerque, nm (16)Fort campbell, ky 42223 (15)El segundo, ca (14)North kingstown, ri 02852 (12)North las vegas, nv (12)Fort campbell, ky (11)Special shipping instructions. (11)Andersen afb, 2 (9)El reno, ok (9)Ft. riley, ks 66442 (9)North military trail palm beach gardens, fl (8)B sun ave ne albuquerque, nm (6)Camp pendleton , ca (5)Ft riley, ks 66442 (5)Fort polk, la (5)North chicago, il 60064 (5)North kingstown, ri (5)Osuna road ne albuguerque, nm (5)East liberty, oh (4)Fort riley, ks (4)Fort riley , ks 66442 (4)Green bay road north chicago, il (4)North chicago, il (4)North little rock, arkansas (4)Atlanta, ga 30329 (3)Butlerville, in 47223 (3)Great lakes, il (3)Great lakes, il 60088 (3)Mcclellan park, ca (3)Street mcclellan, ca (3)And desert storm ave fort campbell, ky (3)3237 peacekeeper way, suite 101 (2)Avenue bushnell, fl (2)Camp pendleton , ca (2)Clairmont road decatur, ga (2)Camp pendleton, ca 92055 (2)Fort riley, ks 66441 (2)Las vegas, nv 89031 (2)Mwr -, ohio (2)North charleston, sc (2)Rock island, il (2)Rockville pike rockville, md (2)Salters, sc (2)St miami, fl (2)Street little rock, ar (2)And desert storm avenue fort campbell, ky (2), null null (1)Andersen afb, 2 (1)Arsenal road york, pa (1)Albuquerque, nm 87113 (1)Arizona and new mexico (1)Atlanta, ga 30319 (1)Atlanta, vamc 1670 clairmont rd. decatur (1)Blm- nm- rio puerco field (1)Bureau of land management (1)Ca and el centro, ca (1)Caco - cape cod nat'l seashore (1)Camp pendleto, ca (1)Camp pendleton (1)Camp pendleton, ca 92055 (1)Camp pendleton,, ca (1)Contractor's drydock facility (1)Caisson hill rd ft riley, ks (1)California and two arizona area commissaries, ca (1)Camp pendleton (1)Charleston, sc 29405 (1)Clarimont road decatur, ga (1)Contractor location and/or wright-patterson afb (1)Contractor's location (1)Crescent city, ca (1)Custer, sc (1)Dillon dam rd zanesville, oh (1)Doral, fl 33138 (1)Department of veterans affairs atlanta va medical center decatur, ga (1)El paso, tx (1)El segundo, ca (1)El segundo, ca 90245 (1)El centro, ca (1)El centro, ca 92243 (1)El dorado, ks (1)El paso & marfa, tx (1)El paso , tx (1)El paso, texas (1)