Public tenders for television in San-diego-ca United States

Find all Broadcasting tenders in the world.
Finding business opportunities has never been easier.

Results for broadcasting. Make a new search!

D -- SATELLITE TELEVISION SERVICE

Department of the Navy, Space and Naval Warfare Systems Command | Published April 14, 2015  -  Deadline April 21, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items and services prepared in accordance with Federal Acquisition Regulation (FAR Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-15-T-8237. This requirement is set-aside for small businesses, NAICS code is 334220 and the size standard is 750 employees. Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable quote. "Quotes will be Evaluated on an All or None Basis." "PLEASE SUBMIT QUOTE IN LINE ITEM SEQUENCE." PROJECT SPECIFICATIONS ATTACHED WITH BLDG LOCATION DRAWINGS ITEM 0001 BASE YEAR DISH 1000.2 ANTENNAS QTY: 6 EACH ITEM 0002 BASE YEAR DISH MOUNT VENT PIPE ADAPTOR QTY: 1 EACH ITEM 0003 BASE YEAR DISH SLEDS WITH PAD AND BALLAST QTY: 3 EACH ITEM 0004 BASE YEAR DISH MULTI-SWITCH QTY: 1 EACH ITEM 0005 BASE YEAR DBS AMPLIFIER QTY: 1 EACH ITEM 0006 BASE YEAR HD RECEIVERS QTY: 8 EACH ITEM 0007 BASE YEAR DUAL-TUNER RECEIVER QTY: 1 EACH ITEM 0008 BASE YEAR 6' HDMI CABLE QTY: 9 EACH ITEM 0009 BASE YEAR CABLES, STRAPS, SUPPLIES QTY: 1 EACH ITEM 0010 BASE YEAR UNDER-EAVE DISH MOUNT AILI QTY: 1 EACH ITEM 0011 BASE YEAR UNISTRUST DISH CLAMP ASSEMBLY QTY: 1 EACH ITEM 0012 BASE YEAR INSTALLATION QTY 1 LOT ITEM 0013 BASE YEAR AMERICAS TOP 120 PACKAGE QTY: 1 LOT MONTHLY CHARGE X 12 MONTHS ITEM 0014 BASE YEAR HD SERVICE QTY: 1 LOT MONTHLY CHARGE X 12 MONTHS ITEM 0015 - BASE YEAR 8 ADDITIONAL RECEIVERS QTY: 1 LOT ITEM 0016 - OPTION YEAR 1 SATELLITE SERVICES BUILDING A33 LOBBY (ROOM 1037) PAO ROOM (1034A) EXECUTIVE OFFICER (ROOM 2033) CAFETERIA (ROOM 4041) SIO SUITE (ROOMS 3012 AND 3013) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE BASE YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0017 OPTION YEAR 1 SATELLITE SERVICES BUILDING A2 GROUND FLOOR (ROOM 04A) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE BASE YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0018 OPTION YEAR 1 SATELLITE SERVICES SEASIDE, BUILDING 600 CAFETERIA, ROOM 346 (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE BASE YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0019 OPTION YEAR 1 SATELLITE SERVICES BAYSIDE, BUILDING 1 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE BASE YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0020 - OPTION YEAR 2 SATELLITE SERVICES BUILDING A33 LOBBY (ROOM 1037) PAO ROOM (1034A) EXECUTIVE OFFICER (ROOM 2033) CAFETERIA (ROOM 4041) SIO SUITE (ROOMS 3012 AND 3013) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION 1 YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0021 OPTION YEAR 2 SATELLITE SERVICES BUILDING A2 GROUND FLOOR (ROOM 04A) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0022 OPTION YEAR 2 SATELLITE SERVICES SEASIDE, BUILDING 600 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 1) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0023 OPTION YEAR 2 SATELLITE SERVICES BAYSIDE, BUILDING 1 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 1) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0024 - OPTION YEAR 3 SATELLITE SERVICES BUILDING A33 LOBBY (ROOM 1037) PAO ROOM (1034A) EXECUTIVE OFFICER (ROOM 2033) CAFETERIA (ROOM 4041) SIO SUITE (ROOMS 3012 AND 3013) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 2) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0025 OPTION YEAR 3 SATELLITE SERVICES BUILDING A2 GROUND FLOOR (ROOM 04A) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 2) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0026 OPTION YEAR 3 SATELLITE SERVICES SEASIDE, BUILDING 600 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 2) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0027 OPTION YEAR 3 SATELLITE SERVICES BAYSIDE, BUILDING 1 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 2) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0028 - OPTION YEAR 4 SATELLITE SERVICES BUILDING A33 LOBBY (ROOM 1037) PAO ROOM (1034A) EXECUTIVE OFFICER (ROOM 2033) CAFETERIA (ROOM 4041) SIO SUITE (ROOMS 3012 AND 3013) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 2) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0029 OPTION YEAR 4 SATELLITE SERVICES BUILDING A2 GROUND FLOOR (ROOM 04A) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 3) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0030 OPTION YEAR 4 SATELLITE SERVICES SEASIDE, BUILDING 600 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE BASE YEAR 3) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ ITEM 0031 OPTION YEAR 4 SATELLITE SERVICES BAYSIDE, BUILDING 1 (CAFETERIA, ROOM 346) (PERIOD OF PERFORMANCE WILL BE ONE YEAR FROM COMPLETION DATE OF THE OPTION YEAR 3) MONTHLY CHARGE X 12 MONTHS TV CHANNEL PACKAGE ________________ HD SERVICE ___________________ ADDITIONAL RECEIVERS, QTY 8 EACH (@.XX/EA) ___________________ Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. Requested delivery date: 30 Days or sooner ARO e. RFQ Number N66001-15-T-8237 f. Preferred method of shipment: F.O.B. Destination Ship to Address: SPAWAR Pacific Receiving Officer 4297 Pacific Highway, Bldg OT7 San Diego, CA 92110-5000 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-80 (3/2/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), February 26, 2015. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. FAR Clause at 52.212-1, Instructions to Offerors Commercial, and 52.212-4, Contract Terms and Conditions Commercial Items, incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications -- Commercial Items and DFARS 252.212-7000 Offeror Representations and Certifications--Commercial Items applies to this acquisition in e-Commerce. FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders, 52.219-6, Notice of Total Small Business Set-Aside, 52.222-3, Convict Labor (E.O. 11755), 52.222-19, Child LaborCooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities (Feb 1999), 52.222-26, Equal Opportunity (E.O. 11246), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds TransferCentral Contractor Registration (31 U.S.C. 3332), 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation) also applies to this acquisition, 52.204-99, System for Award Management Registration (Deviation), 52.222-36, Affirmative Action for Workers with Disabilities, 52.204-2, Security Requirements, 2012-00007 Class Deviation- Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. FAR 52.217- 5, Evaluation of Options. FAR 52-217-8, Option to Extend Services. FAR 52.217-9, Option to Extend the Term of the Contract. 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality AgreementsRepresentation. (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) This RFQ closes April 21, 2015 at 11:00AM, Pacific Standard Time (PST). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-15-T- 8237. The point of contact for this solicitation is Sylvia Paguio at sylvia.paguio@navy.mil. Please include RFQ N66001-15-T-8237 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

Television Programming

Other Defense Agencies, U.S. Special Operations Command | Published September 7, 2016  -  Deadline September 9, 2016
cpvs

Please see the attached Performance Work Statement and combined Synopsis Solicitation.

Direct TV Services

Other Defense Agencies, U.S. Special Operations Command | Published September 11, 2015
cpvs

Link To Document

Direct TV Services

Other Defense Agencies, U.S. Special Operations Command | Published August 15, 2015  -  Deadline August 26, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the information in FAR Subpart 12.6, using simplified acquisition procedures under FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is set-aside 100% for small business per the following: NAICS code 517410 Small business size standard $32.5M Solicitation is issued as a request for quotation (RFQ). The agency intends to award a Firm Fixed Price contract for services as defined in this RFQ. A site walk has been established for Wednesday, August 19, 2015 at 9:30 am. We will meet at Naval Amphibious Base (NAB), main gate. Parking, please park at the dirt lot and make your way to the main gate and an escort will meet you there. For more details See attachments. ATTACHMENTS ATTACHMENT 1- Combined Solicitation ATTACHMENT 2 Performance Work Statement ATTACHMENT 3 -Pricing Spreadsheet

Direct TV Services and Equipment Installation

Other Defense Agencies, U.S. Special Operations Command | Published February 24, 2015
cpvs

Link To Document

Services for TV DTS Repairs onboard the USNS PECOS

Department of the Navy, Military Sealift Command | Published December 9, 2014  -  Deadline December 16, 2014
cpvs

See Statement Of Work Attachment See Brand Name Limited Source Justification Statement

T -- Vforum Mutlimedia Slide Presentation Tutorials

Department of the Navy, Space and Naval Warfare Systems Command | Published May 23, 2016  -  Deadline May 26, 2016
cpvs

Space and Naval Warfare Systems Center, Pacific (SSC Pacific) intends to award a firm fixed price purchase order on a sole source basis to Digital Outpost Inc. The requirement is for the purchase of the following: 0001 Production of six multi media video tutorials and two voice over tutorials for Navy Command and Control Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) System products sustained by Spawar Qty: 1 Lot - Windows Server Update services (WSUS) Administration - Vunerability Remediation Asset Manager (VRAM) Administration -Television - Direct to Sailor (TV-DTS) C-Band LNB Installation -TV-DTS Warped Reflector Check Procedures -TV-DTS Reflector Replacement -TV-DTS Pedestal X or Y Axis fault 0002 Production of (2) "Voice-over" slide presentation tutorials for Navy Command and Control Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) System products sustained by Spawar. Qty: 1 Lot -Cybersecurity - Identifying and Running Public key Infrastructure of (PKI) scans -AN/WSC-3 Transmitter alignment procedures This notice of intent is not a request for quote. A determination by the government not to compete based upon responses to this notice is solely at the discretion of the government. Questions by phone or fax will not be considered. Acquisition of Commercial Items under FAR Part 12 and Simplified Acquisitions Procedures under FAR Part 13 apply. The applicable NAICS Code is 512110 and the business size standard is $32.5 million. The point of contact for this announcement is Fred Espiritu at Frederick.p.Espiritu@navy.mil. To respond to this announcement, you must be registered to the SPAWAR E-Commerce website at https://e-commerce.sscno.nmci.navy.mil and upload your inquiry under SSC Pacific/ Simplified Acquisition N66001-16-T-6714. All responding vendors must be registered to the System for Award Management (SAM) website prior to award of contract. Information can be found at https://www.sam.gov. Complete SAM registration means a registered DUNS and CAGE Code numbers

99--GETWELL and Thin Client Equipment Installation at Building 1, Naval Medical Center San Diego (NMCSD) San Diego, California

Department of the Navy, Naval Facilities Engineering Command | Published October 8, 2014
cpvs

Contractor to remove and re-install all wall mounted items, remove and relocate the armoires to the window side of each room and securely anchor to studs. Remove all existing nurse call junction boxes and electrical wiring, replace missing tile and cove bases and match existing. Demo the dry wall to expose the existing TV plates mounts that are between the two studs, demo the existing TV plates and install and assemble the new backing plates anchoring them to the metal studs together with the PDI mount and drywall around the PDI.

58 -- Multifunctional Information Distribution System (MIDS) Low Volume Terminals (LVT) Block Upgrade 2 (BU2) Retrofit

Department of the Navy, Space and Naval Warfare Systems Command | Published August 27, 2015  -  Deadline October 28, 2015
cpvs

The Space and Naval Warfare Systems Command (SPAWAR), Multifunctional Information Distribution System (MIDS) International Program Office (IPO), intends to award sole source modifications to contracts N00039-15-D-0042 DLS, LLC (350 Collins Road NE, Cedar Rapids, IA 52498 ) and N00039-15-D-0043 ViaSat, Inc. (6155 El Camino Real, Carlsbad, CA 92009) to retrofit MIDS Low Volume Terminals (LVT)s to a Block Upgrade 2 (BU2) configuration. The authority for other than full and open competition is 10 U.S.C. 2304 (c)(1) and FAR 6.302-1, Only One Responsible Source and no other supplies or services will satisfy agency requirements. The Multifunctional Information Distribution System (MIDS) program is multinational program with joint service participation. The Department of Defense (DoD) established the program to design, develop, and deliver low volume, lightweight tactical information system terminals for U.S. and Allied fighter aircraft, bombers, helicopters, ships, and ground sites. The MIDS MIDSLow Volume Terminal (MIDS- LVT) is an Information Technology/National Security Systems (IT/NSS) that provide Link-16 tactical communication data link, tactical air navigation (TACAN), and voice capability. DLS and ViaSat are the original equipment manufacturers and are the only known vendors with the highly specialized knowledge to upgrade their respective MIDS LVTs to BU2 configuration and to provide supporting field retrofit services without incurring substantial duplication of costs. Firms interested in subcontracting opportunities should contact Jeff Adams jeffrey.adams@baesystems.com at DLS, LLC and Sam Butler sam.butler@viasat.com at ViaSat, Inc. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. Responses to this notice of intent to award to DLS, LLC and ViaSat, Inc. should be submitted no later than fifteen (15) calendar days from the date of this synopsis to Ms. Patricia Ponce-Feliu, Contracting Officer, at Space and Naval Warfare Systems Command (SPAWAR), Code 2.1D2, Naval Base Point Loma, Naval Mine and Anti-Submarine Command Complex, 33000 Nixie Way, San Diego, CA 92147-5110. All responsible sources may submit a capability statement. For information and responses regarding this notice, please contact Ms. Patricia Ponce-Feliu at patricia.poncefeliu@navy.mil. The North American Industry Classification System (NAICS) Code for this requirement is 334220- Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing. The Federal Supply Class (FSC) code is 5821- Radio and TV Equipment, Airborne.

FSO Motorola Dispatch Console

Department of the Air Force, Air Education and Training Command | Published August 17, 2015  -  Deadline August 24, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 0010686202 is issued as a Request for Quote (RFQ) IAW FAR Part 12. This requirement is being solicited on FedBizOpps for Full and Open Competition for Brand Name equipment, with North American Industry Classification System (NAICS) Code 334220, Radio and Television broadcasting and Wireless Communication and the small business Size Standard of 750 employees. This combined synopsis/solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-83, effective 3 August 2015. Quotes will be evaluated based on the lowest evaluated price to the Government. In order to be considered for award by the Government, vendors must adhere to the quotation requirements and respective evaluation factors set with in FAR 52.212-1's Addendum. The 502nd Contracting Squadron, 2250 15th St. Bldg 4196, Joint Base San Antonio (JBSA), Fort Sam Houston (FSH), TX 78234- 5007 has a requirement for FSO Dispatch Console in support Brooke Army Medical Center (BAMC). The Government intends to award one (1) Firm Fixed Price contract. See the attached Request for Quote.

69--Heartworks Dual Simulator

Department of Veterans Affairs, Long Beach VANLO | Published April 18, 2016  -  Deadline April 21, 2016
cpvs

This is a combined synopsis/solicitation for commercial items in accordance with FAR Subpart 13 prepared with the format in Subpart 12.6, as supplemented with additional information included in this notice. The acquisition strategy will be full and open competition to best meet the needs of the Government. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) Solicitation number #VA262-16-Q-0695 is issued as a Request for Quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-66. (iv) There are no set-aside provisions associated with this procurement; NAICS code #334510 and small business size standard is 1,250 employees. (v) The technical specifications are listed as brand name or equal (FAR 52.211-6 is applicable). For equal items, please include technical specifications. If technical specifications showing how the equal product meets the salient characteristics are not included, your quote will be considered non-responsive. The "or equal" equipment is required to have the following minimum salient characteristics: ?Comes pre-installed on a desktop or laptop ?Fully functioning anatomic textbook with 160 Cardiac Structures ?3D heart model, fully interactive ?Available pathology models ?Torso mannequin - polyurethane skin, using magnetic field technology in order to detect and locate the TTE or TEE probe ?Realistic TTE probe, constructed of plastic and PVC allows a protective casing to cover the magnetic sensor array inside the housing and imitates a real TTE probe ?Realistic TEE probe, constructed with a combination of rubber and PVC with a braided steel layer to reduce twist, allowing accurate transfer of rotation movement ?2D Ultrasound simulation software package ?Full Doppler functions including pulsed and continuous wave Doppler ?M-Mode ?Measurement tools - Calliper & Area ?Depth of field control CONTENTS: ?Laptop 17" HD or Desktop with 24" HD Display ?HeartWorks Software ?Pathology Modules 1 & 2 ?Doppler functions : Colour Flow Mapping, Pulsed and Continuous Wave Doppler ?Measurement Tools ?M-Mode ?Torso mannequin ?Simulated TTE Probe ?Simulated TEE Probe ?Mouse and mouse mat ?USB Stick ?Connecting cables to enable duel view on TV/projector ?HeartWorks Essentials folder with resources on pathology modules NOTE: Potential offers must be aware that the items being acquired are procured as Brand Name or Equal. For those items that are "or equal", a description of the salient characteristics outlined above. The FAR Clause 52.211-6 Brand Name or Equal applies to this acquisition. Any items quoted as equal not confirming to the requirements of clause 52.211-6 will be considered non responsive and not considered for award.

70 -- ADP COMPONENTS / PR#1300582845

Department of the Navy, Space and Naval Warfare Systems Command | Published July 15, 2016  -  Deadline July 25, 2016
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. Competitive quotes are being requested under N66001-16-T-6293. This requirement is set-aside for small businesses NAICS code is 334111 and the size standard is 1,000 personnel. FSC: 7021. If items in this solicitation requires the delivery of any electrical connectors, the contractor affirms that the connectors are compliant with the following: a) Buy American Act (41 USC 8301-8305); b) Specialty Metals Restrictions (10 U.S.C. 2533b, as implemented by Defense Federal Acquisition Regulation Supplement (DFARS) 225.7003-2); c) Prohibition on acquisition of United States Munitions List items from Communist Chinese military companies (Sections 1211 and 1243 of the National Defense Authorization Acts (NDAA) for Fiscal Years (FY) 2006 (Pub. L. 109-163) and 2012 (Pub. L. 112-81), as implemented by DFARS 225.770-2); and d) Counterfeit Electronic Part Detection and Avoidance Systems requirements (Section 818(c) of the NDAA for FY 2012 (Pub. L. 112-81), as implemented by DFARS 246.870) Item 0001: KINGSTON - DDR4 - 32 GB - LRDIMM 288-PIN PART #:KTH-PL421LQ/32G QTY = 8 EA Item 0002: SAMSUNG PM863 MZ-7LM1T9E - SOLID STATE DRIVE - 1.92 TB -SATA 6GB/S PART #: MZ-7LM1T9E QTY = 12 EA Item 0003: MICROSOFT SURFACE PRO 4 DOCKING STATION PART #: PF3-00005 QTY = 8 EA Item 0004: PLANTRONICS SAVI W745 CONVERTIBLE HEADSET PART #: 86507-01 QTY = 3 EA Item 0005: PLANTRONICS EHS APP-51 HOOK SWITCH PART #: 38439-11 QTY = 3 EA Item 0006: PLANTRONICS HEADSET BATTERY FOR SAVI 740/440 HANDSET PART #: 84598-01 QTY = 3 EA Item 0007: STARTECH.COM MINI DISPLAYPORT TO DP MULTI MONITOR SPLITTER -3- PORT MST HUB PART #: MSTMDP123DP QTY = 13 EA Item 0008: MICROSOFT STYLUS HOLDER FOR SURFACE PRO 3 / BLACK PART #: 5D9-00001 QTY = 13 EA Item 0009: MICROSOFT SURFACE PEN - V3 - STYLUS - BLUETOOTH 4.0 / BLACK PART #: 3ZY-00020 QTY = 7 EA Item 0010: KENSINGTON BLACKBELT 1ST DEGREE RUGGED CASE BACK COVER FOR TABLET PART #: K97416US QTY = 2 EA Item 0011: KENSINGTON BLACKBELT 2ND DEGREE RUGGED CASE FOR SURFACE PRO 4 BACK COVER FO PART #: K97443WW QTY = 2 EA Item 0012: SCM SMARTFOLD SCR3500 SMART CARD READER PART #: SCR3500 QTY = 20 EA Item 0013: TRIPP LITE 6FT DISPLAYPORT MONITOR DIGITAL A/V CABLE M/M PART #: P580-006 QTY = 36 EA Item 0014: MICROSOFT SURFACE 65W POWER SUPPLY POWER ADAPTER PART #: Q5N-00001 QTY = 7 EA Item 0015: MICROSOFT SURFACE PRO 4 TYPE COVER WITH FINGERPRINT ID KEYBOARD PART #: RH9-00001 QTY = 15 EA Item 0016: MICROSOFT SURFACE PRO 4 CORE I7 512 GB SSD 16 GB RAM WINDOWS 10 PRO PART #: TN3-00001 QTY = 1 EA Item 0017: PRECISE TACTIVO MINI FOR ANDROID SMART CARD / FINGERPRINT READER / USB PART #: ALA 133 1000 QTY = 5 EA Item 0018: PRECISE TACTIVO MINI FOR IOS - SMART CARD / FINGERPRINT READER- USB, LIGHT PART #: ALA 123 1014 QTY = 3 EA Item 0019: PRECISE TACTIVO USE CASES BACK COVER FOR CELL PHONE PART #: ALA1401000 QTY = 1 EA Item 0020: GOOGLE CHROMECAST 2 DIGITAL MULTIMEDIA RECEIVER PART #: GA3A00093-A14-Z01 QTY = 5 EA Item 0021: APPLE TV 4 - DIGITAL MULTIMEDIA RECEIVER PART #: MLNC2LL/A QTY = 2 EA Item 0022: MICROSOFT WIRELESS DISPLAY ADAPTER FOR MIRACAST ENABLED WINDOWS 10 DEVICES PART #: CG4-00001 QTY = 5 EA Item 0023: LOGITECH K480 BLUETOOTH MULTI DEVICE KEYBOARD - BLACK PART #: :920-006342 QTY = 4 EA Item 0024: DELL 8X SERIAL ATA DVD+/- RW DRIVE PART #: G9P3H QTY = 1 EA Item 0025. Shipping Cost QTY: 1 lot Cost: GRAND TOTAL: Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size d. RFQ Number N66001-16-T-6273 e. Preferred Delivery: F.O. B. Destination. If quoting FOB origin, shipping estimate must be provided. f. Indicate delivery lead time after receipt of order. Ship to Address: SPAWAR SYSTEMS CENTER PACIFIC Receiving Officer 4297 PACIFIC HIGHWAY, BLDG OTC7 SAN DIEGO, CA 92110 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 (10/05/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), DPN 20151001(Effective 01 Oct 2015). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. . This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 (10/05/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), DPN 20151001(Effective 01 Oct 2015). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The following clauses shown below can be accessed in full text at www.farsite.hill.af.mil/: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note) 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.214-3, Amendments to Invitations for Bids 52.214-4, False Statements and Bids 52.214-5, Submission of Bids 52.214-6, Explanation to Prospective Bidders 52.214-7, Late Submissions, Modifications, and Withdrawals of Bids. 52.219-6, Notice of Total Small Business Set-Aside 52.222-3, Convict LaborE.O. 11755) 52.222-19, Child LaborCooperation with Authorities and Remedies (E.O. 13126) 52.222-21, Prohibition of Segregated Facilities (Feb 1999) 52.222-26, Equal Opportunity(E.O. 11246) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222.37, Employment Reports on Veterans (July 2014) (38 U.S.C. 4212) 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g) 52.223-15, Energy Efficiency in Energy-Consuming Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest after Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions This RFQ closes on July 25, 2016 at 10:00 AM, Pacific Daylight Time (PDT). Quotes uploaded on the SPAWAR e-commerce website at https://ecommerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/ N66001-16-T-6293. The point of contact for this solicitation is Danilo Ibarra at danilo.ibarra@navy.mil. Please include RFQ N66001-16-T-6293 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.

CUSTOM FITTED BOAT COVERS VARIOUS MODELS

Other Defense Agencies, U.S. Special Operations Command | Published January 28, 2016  -  Deadline February 8, 2016
cpvs

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures found at FAR Subpart 13, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation on FedBizOpps; quotes are being requested and a written solicitation will not be issued. Solicitation H92240-16-Q-2010 issued as a request for quotation (RFQ) for BOAT COVERS. (SEE PRICING SCHEDULE) We will accept equal offers. If quoting an equal, please provide detailed specifications and pictures of items offered. This is a total 100% small business set-aside under the category below. NAICS code 313320Small business size standard 1,000 The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-85, effective 04 January 2015 and DFARS Change Notice 20151230, effective 30 December 2015. Quote Submission due NLT 8 February 2016, 1200 P.M.(NOON)EST to WARCOM-CONTRACTS@navsoc.socom.mil. Quotes must be valid for 30 days. No facsimile quotes will be accepted. All quotes must be clearly marked with the RFQ Number H92240-16-Q-2010. Contractors are responsible for verifying receipt of their proposals to this office before offer due date and time. Email is the only method of submission. Quotes, together with the signed amendment(s), if applicable, must be submitted electronically WARCOM-CONTRACTS@navsoc.socom.mil. The following PROVISIONS and CLAUSES apply to this acquisition and will be incorporated into any resultant purchase order: 52.204-7 System for Award Management52.204-13 System for Award Management Maintenance52.209-2 Prohibition on Contract ting w/Inverted Domestic Corporations - Representation52.211-6 Brand Name or Equal52.212-1 Instructions to Offerors-Commercial Items52.212-2 Evaluation Commercial Items52.212-3 Alt I Offeror Representations and Certifications Commercial Items 52.212-4 Contract Terms and Conditions - Commercial Items52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items52.222-22 Previous Contracts and Compliance Reports52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran - Representation and Certifications52.232-39 Unenforceability of Unauthorized Obligations52.232-40 Providing Accelerated Payments to Small Business Subcontractors52.237-1 Site Visit 52.237-2 Protection of Government Buildings, Equipment, and Vegetation52.247-34 F.O.B. Destination52.252-1 Solicitation Provisions Incorporated by Reference), http://farsite.hill.af.mil/ and www.acq.osd.mil52.252-2 Clauses Incorporated by Reference http://farsite.hill.af.mil/ and www.acq.osd.mil52.252-6 Authorized Deviations in Clauses http://farsite.hill.af.mil/ ADDENDUMS: 52.212-1 Instructions to Offerors-Commercial Items (JUL 2013)(m) Quote Preparation and Submission Instructions. (1) Offerors may submit written questions during the quote preparation period up to but no later than 02-02-2016 11:00 AM EST. NSWC will continue to accept written questions up to the closing time of the solicitation; however, time may not permit responses to those questions. Only written questions will receive a response. It is required that each question should include the document name, document date, specific page, paragraph, clause or other definitive citation requiring clarification. All questions and quotes shall be directed to the Contracting Office by email, citing at a minimum "H92240-16-Q-2010" in the subject line at the following address: WARCOM-CONTRACTS@NAVSOC.SOCOM.MIL(2) Quotes shall be submitted in accordance with the instructions herein, and non-conformance with the specified required content may be cause for rejection of the quote. The quote shall be valid for no less than 30 days from the date of RFQ closing, a statement affirming this fact shall be placed on the cover page of the quote. (3) Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale.(4) TO BE CONSIDERED TIMELY. E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for final quote submission. An E-mail quote that resides on a Government server, but has not appeared in the designated E-mail inbox by the due date and time for quote submission will be considered late in accordance with FAR 15.208(b). Therefore, it is incumbent upon the Offeror to ensure that its entire quote is received by the Agency by the designated due date.52.212-2 Evaluation -- Commercial Items (OCT 2014):(a) The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following other than price factor shall be used to evaluate offers: TECHNICAL CAPABILITY. Award will be made to the lowest price quoter who presents a technically acceptable solution.(b) A written notice of award or acceptance of a quote mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote's specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Clause) 52.237-1 - Site Visit - Contact point to request SITE VISIT - WARCOM-CONTRACTS@navsoc.socom.mil The following CLAUSES incorporated in 52.212-5 are also applicable: 52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items.(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:[Contracting Officer check as appropriate.]___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).XX (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).___ (5) [Reserved]___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note). ___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).___ (10) [Reserved]___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).___ (ii) Alternate I (Nov 2011) of 52.219-3.___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).___ (ii) Alternate I (Jan 2011) of 52.219-4.___ (13) [Reserved]XX(14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).___ (ii) Alternate I (Nov 2011).___ (iii) Alternate II (Nov 2011).___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).___ (ii) Alternate I (Oct 1995) of 52.219-7.___ (iii) Alternate II (Mar 2004) of 52.219-7.___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).___ (ii) Alternate I (Oct 2001) of 52.219-9.___ (iii) Alternate II (Oct 2001) of 52.219-9.___ (iv) Alternate III (Oct 2015) of 52.219-9.___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).___ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).XX (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).XX (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2016) (E.O. 13126).XX (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).XX (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).XX (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).___ (31) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).XX (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514___ (ii) Alternate I (Oct 2015) of 52.223-13.___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).___ (ii) Alternate I (Jun 2014) of 52.223-14.___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).___ (ii) Alternate I (Jun 2014) of 52.223-16.XX (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).___ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).___ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).___ (ii) Alternate I (May 2014) of 52.225-3.___ (iii) Alternate II (May 2014) of 52.225-3.___ (iv) Alternate III (May 2014) of 52.225-3.___ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).XX (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).XX (50) 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Jul 2013) (31 U.S.C. 3332).___ (51) 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).___ (ii) Alternate I (Apr 2003) of 52.247-64.(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:[Contracting Officer check as appropriate.]___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)___ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).___ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).___ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(viii) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xi) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.(End of Clause) The following DFARS PROVISIONS and CLAUSES apply to this acquisition and are incorporated by reference. If the offeror has completed any of the following provisions listed in this paragraph electronically as part of its annual representations and certifications at https://www.acquisition.gov, they are to be indicated in the submitted quote, there is no need to complete these provisions again for this solicitation. 252.203-7000 Requirements Relating to Compensation of Former DoD Officials252.203-7002 Requirement to Inform Employees of Whistleblower Rights252.203-7005 Representation Relating to Compensation of Former DoD Officials252.203-7996(DEVIATION) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation.252.203-7997(DEVIATION) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements252.204-7000 Disclosure of Information252.204-7003 Control of Government Personnel Work Product252.204-7004 Alternate A, System for Award Management (Feb 2014)252.204-7008 Compliance with Safeguarding Covered Defense Information Controls252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting252.204-7015 Disclosure of Information to Litigation Support contractors252.209-7991 (DEVIATION) Representation by Corporations Regarding an Unpaid delinquent Tax Liability or a Felony conviction Under Any federal Law-Fiscal Year 2016 Appropriations252.223-7008 Prohibition of Hexavalent Chromium252.225-7000 Buy American - Balance of Payments Program Certificate - Basic252.225-7001 Buy American and Balance of Payments Program252.225-7002 Qualifying Country Sources as Subcontractors252.232-7003 Electronic Submission Of Payment Requests And Receiving Reports252.232-7006 Wide Area Workflow Payment Instructions252.232-7010 Levies on Contract Payments252.244-7000 Subcontracts for Commercial Items252.247-7023 Transportation of Supplies by Sea FULL TEXT DEVIATIONS: 252.203-7996 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation. Include the following provision in all solicitations, including solicitations for the acquisition of commercial items under FAR part 12, that will use funds made available by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in section 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235).Prohibition on Contracting With Entities That Require Certain Internal Confidentiality Agreements-Representation (Deviation 2016-O0003) (Oct 2015)(a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in section 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds appropriated (or otherwise made available) by this or any other Act may be used for a contract with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(End of provision) 252.203-7997 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. Include the following clause in all solicitations and contracts, including solicitations and contracts for the acquisition of commercial items under FAR part 12, that will use funds made available by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in section 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235).Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements (Deviation 2016-O0003)(Oct 2015)(a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) 252.209-7991 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2016 Appropriations.Include the attached provision in all solicitations, including solicitations for the acquisition of commercial items under FAR part 12, that will use funds made available by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 744 and 745 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or A Felony Conviction under Any Federal Law-Fiscal Year 2016 Appropriations (Deviation 2016-O0002) (Oct 2015)(a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in sections 744 and 745 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds made available by this or any other Act may be used to enter into a contract with any corporation that-(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(b) The Offeror represents that-(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability,(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) The following SOFARS PROVISIONS and CLAUSES apply to this acquisition.5652.201-9002 Authorized Changes Only by Contracting Officer (2005) As prescribed in 5601.602-2-70(f), insert the following clause, Fill-in The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as part of this contract. Except as specified herein, no order, statement, or conduct of Government personnel who visit the contractor's facilities or in any other manner communicates with Contractor personnel during the performance of this contract shall constitute a change under the Changes clause in Section I. In the event the Contractor effects any change at the direction of any person other the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in cost incurred as a result thereof. The address and telephone number of the Contracting Officer will be provided on order. 5652.204-9002 Instructions for the Use of Electronic Contracts (2007)Revised November 2007) As prescribed in 5604.502, insert the following clause, In accordance with DOD policy, this solicitation and the resulting contract will be executed and documented through electronic means. As a result, the use of the terms "documented," "copy," "printed," "in writing," or "written" within this document shall refer to all electronically transmitted documents that will become part of the electronic contract file and an official government record. Any reference to official signatures and signed documents shall refer to electronic signatures. Whenever an electronic signature is used it shall have the full force and effect as a handwritten signature. 5652.204-9003 Disclosure of Unclassified Information and Notification Requirements for Cyber Security Breaches (2013) (Revised June 2013) As prescribed in 5604.403(b), insert the following clause, (a) On September 21, 2001, the Department of Defense designated Headquarters US Special Operations Command (USSOCOM) a sensitive unit, as defined by Title 10 United States Code (USC) Section 130b (10 USC 130b). In keeping with this designation, unclassified information related to USSOCOM military technology acquisitions managed by USSOCOM or any of its component commands, will be designated Controlled Unclassified Information (CUI). As such, the contractor hereby unequivocally agrees that it shall not release to anyone outside the Contractor's organization any unclassified information, regardless of medium (e.g., film, tape, document, contractor's external website, newspaper, magazine, journal, corporate annual report, etc.), pertaining to any part of this contract or any program related to this contract, unless the Contracting Officer has given prior written approval. Furthermore, any release of information which associates USSOCOM, Special Operation Forces (SOF), or any component command with an acquisition program, contractor, or this contract is prohibited unless specifically authorized by USSOCOM. (b) Request for approval shall identify the specific information to be released, the medium to be used, and the purpose for the release. The contractor shall submit the request to the Contracting Officer at least 45 days before the propose date for release for approval. No release of any restricted information shall be made without specific written authorization by the Contracting Office. (c) The protection of sensitive but unclassified data reflecting Special Operations technologies, personnel, plans, and business associations requires due diligence on the part of those in possession of such information. The application of appropriate security measures to ensure the safekeeping of USSOCOM and company proprietary data, intellectual property, and personnel data is the responsibility of all parties who have access to such information. All contractors supporting USSOCOM are required to inform the Contracting Officer within three business days of when there has been a breach or successful penetration of the contractor's network(s) or information system(s). Breaches include unauthorized intrusions of the contractor's server(s) from external parties whether through introduction of malware, hacking, the compromise of access passwords, or any other unauthorized access or compromise. Breaches also include the physical loss of storage media such and disks, hard drives, thumb drives, laptops or other devices which contain duplicates of information contained on the contractor's data systems, or the willful or accidental transmission, copying or posting of contract information which has not been specifically authorized by the Contracting Officer. Estimates of damage and mitigation strategies will be submitted to the Contracting Officer within a period following the breach specified and agreed upon by the Contractor and the Contracting Officer. (d) The Contractor shall include a similar requirement to this clause in each subcontract under this contract. Subcontractors shall submit request for authorization to release and notifications related to cyber security breaches through the prime contractor to the Contracting Officer. (e) The Contractor further understands that Title 18 USC Section 701 specifically prohibits the use of the USSOCOM emblem or logo in any medium (e.g., corporate website, marketing brochure, newspaper, magazine, etc.) unless authorized in writing by USSOCOM. Forward any request to use the USSOCOM emblem or logo through the Contracting Officer. 5652.215-9016 Technical and Contractual Questions Concerning This Solicitation (2000)As prescribe in 5615.209(l), insert the following provision, Editable and Fill-ins All questions concerning this procurement, either technical or contractual must be submitted in writing to the Contracting Office. No direct discussion between the technical representative and a prospective offeror will be conducted unless it is deemed necessary by the Contracting Officer. Questions shall be sent to the following point of contact: WARCOM-CONTRACTS@navsoc.socom.mil 619-537-3201 5652.233-9000 Independent Review of Agency Protests (2013)(Revised August 2011) (Revised September 2013-reorganization) As prescribed in 5633.106, insert the following clause, All protests shall be submitted through the Contracting Officer. A request for an independent review of the protest decision shall be made through the Contracting Officer to the HCD/FCO. If the HCD/FCO is the Contracting Officer, submit the request in accordance with FAR 33.103(d) (4) to: Chief, SOF-AT&L-KM or SOF-AT&L-KX as appropriate, 7701 Tampa Point Blvd., MacDill AFB, FL 33621, Fax (813) 826-7504. Quotes received without the completed copy of the provision at FAR 52.212-3 or completed SAM representation may be considered non-compliant. Vendors must be registered in the System for Award Management (SAM) to be eligible for award. VENDOR TO PROVIDE: PROMPT PAYMENT TERMS: ___________________________CAGE Code: _________________ DELIVERY INFORMATION: SEE PRICING SCHEDULE REQUEST FOB DESTINATION SHIP T0MATERIAL CONTROL1300 HELICOPTER RDVIRGINIA BEACH, VA 23459

58 -- URGENT PR - AUDIO SYSTEM

Department of the Navy, Space and Naval Warfare Systems Command | Published July 7, 2015  -  Deadline July 9, 2015
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation. Competitive quotes are being requested under N66001-15-T-7186. This requirement is SBSA only, NAICS code is 334310 and business size standard is 750 employees. FSC 5830 1. Part #: SMT3000RMI2U - APC UPS 230V BLK LCD UPS, Manufacturer: APC (LINE# 9), QTY = 2 EA. 2. Part #: F1DN102C - Belkin Secure 2-Port DVI-I KVM Switch, Manufacturer: Belkin (LINE# 10), QTY = 30 EA 3. Part #: R-1650-C - Klipsch 6-1/2" Ceiling Speaker, Manufacturer: Klipsch, QTY = 4 EA 4. Part #: B-70 - Klipsch Drop Ceiling Speaker Bracket, Manufacturer: Klipsch, QTY = 4 EA 5. Part #: MX395W/O - Shure Ceiling Microphone Array, Manufacturer: Shure, QTY = 1 EA. 6. Part #: PNE603 - Sharp PN-E603 Digital Signage Display - 60.1" LCD Ethernet, Mfg: Sharp, QTY = 1 EA 7. Part #: 535-2000-217 - Vaddio Mounting Frame, MFG: Vaddio, QTY = 1 8. Part #: CT475 - Crown Audio Amplifier, 4-Channel, 74W/Channel 1RU, MFG: Crown Audio, QTY = 1 EA 9. Part #: PC-DL9D3YV01M - Fibertronics SC/LC-APC Duplex Fiber Optic Patch cable, Single-mode, 3mm Yellow PVC Jacket, 1 Meter Long, MFG: Fibertronics. QTY = 2 EA 10. Part #: 80611127657 - 3M SC SM HOT MELT CERAMIC POLISH, MFG: 3M, QTY = 60 11. Part #: 012ESF-T4101D20 - Corning Freedom Loose Tube 12F SM, OFNR, MFG: Corning, QTY = 500 EA 12. Part #: PC-EE9D3YV03M - Fibertronics SC-APC/SC-APC Duplex Fiber Optic Patch cable, Single-mode, 3mm Yellow PVC Jacket, 3 Meters Long, MFG: Fibertronics, QTY = 2 EA 13. Part #: PC-EE9D3YV01M - Fibertronics SC-APC/SC-APC Duplex Fiber Optic Patch cable, Single-mode, 3mm Yellow PVC Jacket, 1 Meter Long, MFG: Fibertronics, QTY = 2 EA 14. Part #: 31344 - C2G Cat6 5FT Green Snag-less Boot Copper Patch Cord, MFG: C2G, QTY = 36 EA 15. Part #: EYN879B-PB-1000 - BlackBox GigaTrue CAT6 550-MHz Solid Bulk Cable - Plenum, Green, 1000-ft. MFG: BlackBox. QTY = 8 EA 16. Part #: 27173 - C2G 10ft Cat6 550 MHz Snagless Patch Cable Green, MFG: C2G, QTY = 36 EA 17. Part #: PC-LL9D3YV10M - Fibertronics LC-APC/LC-APC Duplex Fiber Optic Patch cable, Single-mode, 3mm Yellow PVC Jacket, 10 Meters Long, MFG: Fibertronics, QTY = 1 EA 18. Part #: PC-KD9D3YV10M - Fibertronics LC/SC Duplex Fiber Optic Patch cable, Single-mode, 3mm Yellow PVC Jacket, 10 Meters Long, MFG: Fibertronics, QTY = 1 QTY 19. Part #: F1D9012B10 - Belkin Secure KVM Cable Kit, MFG: Belkin, QTY = 60 EA 20. Part #: F1D9013B10 - Belkin USB A/B CAC SKVM Cable, MFG: Belkin, QTY = 60 EA 21. Part #: 42527 - Quiktron 50Ft HDMI High Speed Cable, MFG: Quiktron, QTY = 4 EA 22. Part #: 100010B - PLATINUM TOOL MOD PLUG RJ45 8C C6 SOL/STR 100PK, EZ-RJ45, MFG: PLATINUM TOOL, QTY = 1 EA 23. Part #: 27167 - C2G 100ft Cat6 550 MHz Snagless Patch Cable White, MFG: C2G, QTY = 1 EA 24. Part #: 110418 - 6" XLR-Female to Euroblock Cable, MFG: Symetrix, QTY = 2 EA 25. Part #: SD-AUD2-01 - Sound Devices Audio Cable TA3F to STD 3 PIN XLR, MFG: LAIRD, QTY = 2 EA 26. Part #: HOGM-60.K - Rapcohorizon Microphone Cable XLR Female to XLR Male, MFG: Rapcohorizon, QTY = 1 EA 27. Part #: PHX-100F - 3 Pole Female Connector, MFG: Hosa, QTY = 5 EA 28. Part #: 163100-08-1RL - 18awg 3C Shielded 100FT Spool, Slate (Replace part# 2423CSL005), MFG: CSC, (MFR Minimum Order: 500ft), QTY = 500 29. Part #: TOTHHDMFDVM1 - Insten HDMI-F to DVI-M Adapter, Gold-Plated, MFG: Insten, QTY = 4 EA 30. Part #: 29207 - C2G 500ft Shielded Plenum Speaker Wire 18AWG, MFG: C2G, QTY = 2 EA 31. Part #: 40416 - C2G 50ft 3.5mm M/M Stereo Audio Cable, MFG: C2G, QTY = 1 EA 32. Part #: 40414 - C2G 12ft 3.5mm M/M Stereo Audio Cable, MFG: C2G, QTY = 1 EA 33. Part #: PTL-31-427-BL - BRADY LBL SELF-LAMINATING BLU ROLL, MFG: BRADY, QTY = 2 EA 34. Part #: PTL-31-427-GR - BRADY LBL SELF-LAMINATING VINYL GRN, MFG: BRADY, QTY = 2 EA 35. Part #: R4310 - BRADY RIBBON FOR TLS2200 PRINTER, MFG: BRADY, QTY = 2 EA 36. Part #: TZe241 - BROTHER TZE STANDARD ADHESIVE LAMINATED LABELING TAPE, 3/4W, BLACK ON WHITE, MFG: BROTHER, QTY = 2 EA 37. Part #: 613350 - Legrand On-Q Surface Mounting Box, MFG: Legrand , QTY = 10 EA 38. Part #: A6D2S1JNNB5000 - THOMAS & BETTS/CARLON INNERDUCT - OSP 1 1/4' PE CORRUG W/TAPE ORN 5RL 1 1/4' CORR PE ORG W/1130 LB T. MFG: THOMAS & BETTS/CARLON, (PRICED PER 100FT. QTY: 2.5 = 250 FT), QTY = 2.5 EA 39. Part #: MXP4003GR250 - MaxCell, Fabric Innerduct, 4" 3 Cell, Plenum, Green, 250' Reel, MFG: MAXCELL BUSINESS UNIT, QTY = 250 EA 40. Part #: 56110 - Klein Poly PuLl Line Bucket with Tracer, 6500FT, MFG: Klein, QTY = 1 EA 41. Part #: SPLHC25/25M - 3/4 in. Galvanized steel conduit with thermoplastic rubber covering. (SPLHC) Conduit size NW - 25, reel length - 25 meters. (TBEHC0750-30 HAS BEEN DISCONTINUED), MFG: THOMAS & BETTS, QTY = 1 EA 42. Part #: 9363 - Thomas and Betts 3/4" Straight LT Connector (Sold in multiples of 25 with a min of 25.), MFG: Thomas and Betts, QTY = 25 EA 43. Part #: B004BP1FTK - Universal Adjustable Tilting/Swiveling Articulating Full Motion TV Wall Mount Bracket for LCD LED Plasma, MFG: Mount-It!, QTY = 1 EA 44. Part #: T50I0C2 - TYTON HELLERMANN CBL TIE 12" PA66 BLK 50LB STD 100PK, MFG: TYTON HELLERMANN, QTY = 400 EA 45. Part #: T18R0C2 - TYTON HELLERMANN CBL TIE 4" NYL BLK 18LB MINI 100PK, MFG: TYTON HELLERMANN, QTY = 3 EA 46. Part #: T50R0C2 - TYTON HELLERMANN CBL TIE 8" PA66 BLK 50LB STD 100PK, QTY = MFG: TYTON HELLERMANN, QTY = 300 EA 47. Part #: HN38 - 3/8-16 Dottie Steel Hex Nut, MFG: Dottie, QTY = 1 EA 48. Part #: MP+1.4X11 - 3M FIRE STOP PUTTY INTUMSCNT 1.4' X 11' STICK MP+MOLDABLE ** 98040054177, MFG: 3M, QTY = 2 EA 49. Part #: 58361 1/2 W/O BC - THOMAS & BETTS/CARLON SC 583611/2W/OBC BOX, MFG: THOMAS & BETTS/CARLON, QTY = 3 EA 50. Part #: LV2 - ARLINGTON BOX ELIMINATOR DG PLASTIC LV MOUNT BRACKET, MFG: ARLINGTON INDUSTRIES, QTY = 20 EA 51. Part #: 60018BEE100 - TAPE VINYL ELEC BLK 3/4'X66' EL766-B, MFG: ADHESIVE TAPE SUPPLY, QTY = 10 EA. 52. Part #: THHN-12-BLK-SOL-CU-500S/R - 12 THHN BLK SOL Elec Wire (500FT MINIMUM), MFG: CSC, QTY = QTY = 0.5 EA 53. Part #: THHN-12-GRN-SOL-CU-500S/R - 12 THHN GRN SOL Elec Wire (500FT MINIMUM), MFG: CSC, QTY = 0.5 EA. 54. Part #: THHN-12-WHT-SOL-CU-500S/R - 12 THHN WHT SOL Elec Wire (500FT MINIMUM), MFG: CSC, QTY = 0.5 EA 55. Part #: HCL414 - Wireless Solutions Copper lug,4 gauge, 1/4" stud/10 pack, MFG: Wireless Solutions, QTY = 1 EA 56. Part #: 12587 - #6 Ground Wire-Black, MFG: AMERICAN INSULATED WIRE, QTY = 30 EA 57. Part #: 03143 - C2G 10ft 18 AWG Computer Power Extension Cord (IEC320C13 to IEC320C14), MFG: C2G , QTY = 10 EA 58. Part #: P052-008 - Tripp Lite Standard UK Computer Power Cord - 15A (IEC- 320-C19 to BS-1363 UK Plug) 8-ft, MFG: Tripp Lite, QTY = 2 EA 59. Part #: AC-210AE - Furman AC210AE Power Supply 220-230V, MFG: Furman, QTY = 1 EA 60. Part #: 2179 - AC Female Power Wall Socket United Kingdom BS1363 13 Amp 250 Volt White Panel Mount Switch/Light, MFG: Stay Online, QTY = 2 EA 61. Part #: 1129049 - Wireless Solutions Pan Head Machine Screw 10-32X3/8", Bag of 100, MFG: Wireless Solutions, QTY = 2 EA 62. Part #: 4XLW7 - Toggle Bolt Anchor, 1/4-20 x4, PK50, MFG: Grainger, (Checked w/Hilti and they do not make anything like this/quoted Grainger), QTY = 1 EA 63. Part #: 51540 - Mason Screw 1/4x1-1/4", MFG: TAPCON, QTY = 100 64. Part #: 32TH79 - EZ Anchor Drywall, #8, 25 pack, MFG: WESTWARD, QTY = 1 EA 65. Part #: 02720-2416-451 - Porteous Hex Set wood screw, MFG: Porteous (LINE# 108), QTY = 1 EA 66. Part #: DDSMS12212 - SCREWS, STAINLESS #12 X 2-1/2 (LENGTH) 100BX, MFG: Dottie, QTY = 1 EA 67. Part #: FW14 - Flat Washer 1/4", MFG: Dottie, QTY = 1 EA 68. Part #: WB-240304FR-WH - 24" H x 48" W x 3/4" D WoodbAcker Flame Retardant Telecom Backboards, WHITE MFG: CableOrganizer, QTY = 1 EA 69. Part #: WB-220304FR-WH - 24" H x 24" W x 3/4" D Woodbacker Flame Retardant Telecom Backboards, WHITE MFG: CableOrganizer, QTY = 1 EA 70. Part #: 10562-001 - CHATSWORTH SUPPORT EARTHQUAKE BRACE UNIVERSAL YZN KIT, MFG: CHATSWORTH, QTY = 1 EA 71. Part #: ATR5/8'X120'YZN - B-LINE THREADED ROD 5/8'-11 X 10' YZN, MFG: B-LINE, QTY = 1 EA 72. Part #: HN58 - Dottie 5/8 Steel Hex Nut, MFG; Dottie, QTY = 1 EA 73. Part #: FW58 - Dottie Flate Washer 5/8, MFG: Dottie, QTY = 1 EA 74. Part #: DROP-IN5/8 - Fastenal 5/8-11 thread x 7/8"holex 2-1/2"min embed. Carbon Steel zinc finish, MFG: Fastenal, QTY = 2 EA 75. Part #: 32869 - 5/8" x 11 x 3 STUDS, MFG: Fastenal, QTY = 1 EA 76. Part #: LW58 - Dottie 5/8 Lock Washer, MFG: Dottie, QTY = 1 EA 77. Part #: 2CE78 - 5/8-11X1-1/4" Hex Cap Screw, MFG: GRAINGER, QTY = 2 EA 78. Part #: 07888 - C2G RJ45 Patch Cord Boot - Green - 25pk - Use for Cat5E, Cat6, and Cat6a, MFG: C2G, QTY = 2 EA 79. Part #: 30882VB2 - Lennox 1/2" to 1" Step Bit, MFG: Lennox, QTY = 2 EA 80. Part #: 3005656L - Lennox 3-1/2" Hole Saw, MFG: Lennox, QTY = 1 EA 81. Part #: 81343 - Permatex Anti-Seize Lubricant, 1 oz. Tube EACH, MFG: Permatex, QTY = 1 EA 82. Part #: 48124 - 1-5/8" x 1-5/8" x 10' 12 Ga. Pre-Galvanized Steel Half Slot Strut Channel, MFG: Fastenal, QTY = 2 EA 83. Part #: ATR 3/8 X 120 YZN - B-LINE THREADED ROD 3/8'-16 X 10' YZN, MFG: B-LINE, QTY = 2 EA 84. Part #: N228ZN(3/8) - B-LINE NUT SPRING 3/8' 16 THREAD, 78101140363. 100PK, MFG: B-LINE, QTY = 1 EA 85. Part #: 4823 - Stay Online IEC60320 C14 to Nema 5-15R, MFG: Stay Online, QTY = 2 EA 86. Part #: FW38 - Dottie Flat Washer 3/8", MFG: Dottie, QTY = 1 EA 87. Part #: 05112859598 - 3M Heat Shrink Tubing, MFG: 3M, QTY = 1 88. Part #: P002-002 - TRIPP LITE PS CIRCUIT BREAKER PWR CONV CABLE PC TO AC 2FT, MFG: TRIPP LITE, QTY = 3 89. Shipping to GUAM = Basis for award: The government anticipates awarding a firm-fixed price purchase order on the lowest priced technically acceptable quote. This solicitation document incorporates provisions and clauses in effect Current to FAC 2005-78, Effective 26 Dec 2014 and DFARS Current to DPN 20150129 (Effective 29 Jan 2015) Edition. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at http://farsite.hill.af.mil/. Current FAR & DFAR. The provision at 52.212-1, Instructions to Offerors Commercial and 52.212-4, Contract Terms and Conditions Commercial Items, incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications -- Commercial Items and DFAR S 252.212-7000 Offeror Representations and Certifications. Current FAR & DFAR. FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items applies to acquisition and includes 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)), 52.233-3, Protest After Award (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (Pub. L. 108-77, 108- 78), 52.222-3, Convict Labor E.O. 11755), 52.222-19, Child Labor Cooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities (Feb 1999), 52.222-26, Equal Opportunity (E.O. 11246), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds TransferCentral Contractor Registration (31 U.S.C. 3332), 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note), 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.214-3, Amendments to Invitations for Bids, 52.214-4, False Statements and Bids, 52.214-5, Submission of Bids, 52.214-6, Explanation to Prospective Bidders, 52.214-7, Late Submissions, Modifications, and Withdrawls of Bids. DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items and DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items Deviation apply to this acquisition and includes 52.203-3, Gratuities (10 U.S.C. 2207), 252.225-7001, Buy American Act and Balance of Payments Program (41 U.S.C. 10a-10d, E.O. 10582), 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (10 U.S.C. 2227). All responding vendors must be registered to the System for Award Management (SAM) website prior to award of contract. Information can be found at https://www.sam.gov. Complete SAM registration means a registered DUNS and CAGE Code numbers. DFARS Clause 252-204-7001, Commercial and Government Entity (CAGE) Code Reporting, 52.204-6, Data Universal Numbering System (DUNS). This RFQ closes on July 09, 2015 at 10:00 AM, Pacific Daylight Time (PDT). Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified Acquisitions/N66001-15-T-7186. The point of contact for this solicitation is Danilo Ibarra at danilo.ibarra@navy.mil. Please include RFQ N66001-15-T-7186 on all inquiries. All responding vendors must be registered to the Central Contractor Registration (CCR) and ORCA prior to award of contract. Information can be found at https://www.sam.gov/.

C--Mechanical, Electrical and Fire Protection (MEFP) Engineering Services, A-E IDIQ, Unrestricted, NAVFAC Southwest, San Diego, California

Department of the Navy, Naval Facilities Engineering Command | Published May 3, 2016  -  Deadline June 2, 2016
cpvs

N62473-16-R-1870 DESCRIPTION: THIS IS AN UNRESTRICTED PROCUREMENT. ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM (SF) 330, ARCHITECT-ENGINEER QUALIFICATIONS, IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSAL (RFP) PACKAGE TO DOWNLOAD. Architect-Engineer (A-E) services are required for a firm fixed-price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Mechanical, Electrical and Fire Protection (MEFP) Engineering services for Mechanical, Electrical, and Fire Protection Projects. Projects under this contract will occur at various military installations located in the NAVFAC Southwest Area of Responsibility (AOR): California, Arizona, Nevada, Colorado, New Mexico, and Utah; but may be available to the NAVFAC area of responsibility (AOR) as approved by the NAVFAC Southwest (SW) Chief of Contracting Office (CCO). The preponderance of work is expected to be in southern California. A-E Design and Engineering Services shall mainly provide for, but not be limited to, MECHANICAL, ELECTRICAL AND FIRE PROTECTION ENGINEERING related services. All A-E services will be in accordance with the scope of this contract, applicable references, and Unified Facilities Criteria (UFC). The number of design task orders per fiscal year may vary and may involve surges of multiple projects with overlapping delivery dates. Primary A-E services required: Preparation of Requests for Proposals (RFP) for Design Build (DB) projects; Design-Bid-Build (DBB) construction contract packages (i.e., full plans and specifications); Mechanical/Electrical Site Investigations, Studies, Surveys; and Reports from studies, surveys and/or site investigations. Secondary A-E services required: Cost estimates; construction contract support services (CCSS) or post construction award services (PCAS); Fire Protection Engineering Designs, Studies, Surveys and Site Investigation (e.g. fire risk/hazard analysis, life safety code analysis, fire modeling and engineering documentation, antiterrorism, and final inspections and tests of installed Fire Protection Systems. Fire Protection surveys shall be conducted within the guidelines established by OPNAVINST 11320.23G). Support A-E services which may be required: Technical reviews of government-prepared RFP for DB projects and/or full plans and specifications for DBB projects; preparation of planning and programming support documents; incidental architectural, civil, structural, geotechnical, and environmental work; identification and abatement methods for existing asbestos-containing materials, lead-based paint, and other hazardous materials. Primary types of projects will include, but are not limited to, sustainable energy documentation (e.g. Energy Master Planning, Commissioning, Life Cycle Cost, LEED/Third Party Certifications, Title 24 Energy Compliance documents, ASHRAE 90.1 compliance documents, and ASHRAE 90.1 Performance Rating Method reports); Military Construction (MILCON), new construction, major repair/renovation of on-site power generating systems (e.g. solar, cogeneration); control systems (e.g. microgrid, utility control systems); heating, ventilation, air conditioning and control systems (e.g. exhaust systems, direct digital control schematic and architecture); energy supply systems (i.e. above and below ground steam distribution, high temperature/pressure water, refrigeration systems, and natural gas including earthquake shut off valves); plumbing systems; interior and exterior electrical power systems (.e.g. interior building power, medium and low voltage distribution systems, primary and secondary substations, Uninterruptable Power Supply (UPS), emergency generators); communication and security systems (e.g. cable TV, electronic security systems); fire alarm; and lighting systems for airfield, operational and training, commercial, institutional, industrial, research development, quality of life facilities, etc. Secondary type of projects will include, but are not limited to, new construction, major repair/renovation of industrial ventilation; compressed air; medical gas; oxygen; fire protection systems (e.g. fire sprinklers, fire alarm and detection systems, and fire resistant building assemblies). The maximum contract value may not exceed $30,000,000 aggregate total. The minimum guarantee for the contract is $5,000. The minimum guarantee for the entire contract term (including option years) will be satisfied by the award of the initial task order. The minimum value of individual task orders executed under this contract is $200,000. The maximum value of individual task orders executed under this contract is $2,500,000. There will be no dollar limit per year. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Contract term is for a one-year base period with four option periods. Each performance period will run 365 (366 for leap year) calendar days. The hourly rates will be negotiated for each performance period. The Government may exercise the option period unilaterally. Per NFAS 17.208-100(c)(1), options for PCAS may be negotiated on individual task orders for unilateral exercise. The estimated start date is December 2016. The NAICS Code for this procurement is 541330 (Engineering Services) and the annual small business size standard is $15 Million. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. The contractor is not guaranteed work in excess of the minimum guarantee. Firms that provided Architect-Engineer services for a task order issued under the resulting contract are prohibited from participating on the subsequent construction contract. This limitation also applies to subsidiaries/affiliates of the firm. SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS: Selection of Architects and Engineers, formerly the Brooks Act (PL 92-582) and Federal Acquisition Regulations (FAR) Part 36.6 selection procedures apply. The evaluation and selection will be based on the following criteria: Criterion 1, Professional Qualifications; Criterion 2, Specialized Experience and Technical Competence; Criterion 3, Capacity; Criterion 4, Past Performance; Criterion 5, Location and Knowledge of the Locality; Criterion 6, Quality Control; Criterion 7, Utilization of Small Business, and Criterion 8, Volume of Work. Submitted SF330s (Architect-Engineer Qualifications) and related information will be evaluated to determine the most highly qualified firm based on criteria responses. Criteria 1 and 2 are considered most important and of equal importance to each other; Criteria 3, 4, 5, 6 and 7 are of lesser importance and listed in descending order of importance; and Criterion 8 is of lesser importance and will be used as a tiebreaker among firms considered to be technically equal. Evaluation of past performance and experience may include information provided by the firm, customer inquiries, Government databases, and publicly available sources. Failure to provide requested data, accessible points of contact, or valid phone numbers may result in a firm being considered less favorably in the evaluation. In evaluating an Offerors capability, the Government will consider how well the offeror complied with these instructions. All projects provided in the SF 330 (Architect-Engineer Qualifications) shall have been completed by the office/branch/individual team member actually performing the work under this contract. Projects not performed by the office/branch/individual team member will be excluded from evaluation consideration. Submission Requirements: The SF330, Part 1 submission is limited to thirty (30), 8.5x11 pages (see definition). Information submitted beyond the stated page limitation, unless otherwise accepted, will not be considered in the evaluation. Submit one (1) original and three (3) copies of SF330 (Parts 1 and 2), addressing the selection criteria information below. Requested items not counted as part of the 30-page limitation are as noted herein. Also submit one electronic copy of the complete SF330 on CD (Adobe Acrobat .PDF format). SF330, Part 1, Sections B and C: In Block 5, in addition to the name of the firm, provide the firms Data Universal Numbering System (DUNS) number issued by Dun and Bradstreet Information Services. In Block 9, in addition to the name of the firm, provide the DUNS number of each proposed team member. SF330, Part 1, Section D: Organization Chart: In addition to requirements stated in the SF330 Instructions, identify on the submitted organization chart the relationships and lines of authority of the proposed team members, including key subcontractors, including the following: - Name - Firm employed with - Job Title/Role - Licensure, certification, and or accreditation - Permanent geographic location of individual Note: All individuals listed on the organization chart are not required to have a resume in Section E, such as administrative or lower level engineering positions. This chart shall not be counted as part of the 30-page limitation. This chart must be affixed to the submittal to avoid separation in handling. SF330, Part 1, Section E, Resumes of Key Personnel, CRITERION 1, PROFESSIONAL QUALIFICATIONS: The evaluation will consider the professional qualifications of proposed key personnel (see definition) in providing relevant primary and secondary A-E services for project types identified for this contract. Include the geographic office location of the individual on the resume. All key personnel must be professionally registered/accredited (see definition) in their discipline. The designated Program Manager (see definition) shall be a professionally registered Electrical Engineer and be an employee of the prime A-E firm. The prime A-E firm shall have a minimum of two (2) professionally registered Electrical Engineers on staff, in addition to the Program Manager, to perform the anticipated work of this contract. In addition, the Offerors team (see definition) shall include a minimum of two (2) professionally registered Mechanical Engineers, and one (1) professionally registered Fire Protection Engineer. Key personnel demonstrating experience with projects located in California may be considered more favorably in the evaluation Submission Requirements: Provide brief resumes of proposed key personnel who will specifically perform the relevant primary and secondary A-E services for relevant project types identified for this contract. Non-relevant information will not be considered. Resumes of personnel performing only support services (as listed above) are not required and will not be considered. Certificate copies will not be counted in the 30-page limitation. For each key personnel, indicate highest level of education achieved, number of years engaged in the discipline, and professional registration discipline, state, and number. Submit a copy of the applicable current professional registration/accreditation certificate (personnel with registration in multiple states need only submit a copy from one state). Certificate copies will not be counted in the 30-page limitation. Key personnel resumes shall include, but not be limited to, individuals who will perform the functions of Program Manager, Design Quality Control Manager (DQCM), and Sustainable Design Manager. Key personnel resumes from the prime A-E firm shall include, but not be limited to, a minimum of two (2) professionally registered Electrical Engineers. Key personnel resumes from the Offerors team shall include, but is not limited to, a minimum of two (2) registered professional Mechanical Engineers, and one (1) registered professional Fire Protection Engineer. See definitions at the end of this notice for registration and experience requirements. Resumes of these individuals shall demonstrate their depth of experience in their respective roles. Each resume shall include a maximum of five (5) specific, recently completed projects that best demonstrate the individuals qualifications in performing the relevant primary and secondary A-E services listed for this contract. Projects not meeting these requirements will not be considered. Submit only projects in which the key personnel performed a significant role. Provide the month and year of completion of the professional services for each project. Submit a brief description of the project within SF330, Section E, Block 19. For each project describe: 1) Scope and cost; 2) Role and responsibilities of the key personnel; and 3) The specific A-E services performed that are relevant to the primary and secondary services required by this contract. Identifying only the individuals job title will not provide sufficient information to determine their specific experience as it relates to services to be performed under this contract. Projects not meeting these requirements will not be considered. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a standalone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. For purposes of this evaluation, recent is defined as professional services completed during the period of June 2, 2011 through June 1, 2016. Projects must be complete as of the SF330 due date. Completion is defined as the date that the final design or design-build package was completed, or the date that the study/investigation/report was completed and submitted, and does not include construction support services. Projects not meeting these requirements will not be considered to demonstrate recent experience. SF330, Part 1, Section F, Example Projects, CRITERION 2, SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: The evaluation will consider specialized experience and technical competence of the proposed team relative to the primary and secondary A-E services for project types identified for this contract. The evaluation will also consider the experience of the prime A-E in managing multi-disciplinary teams. Relevant projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: For the proposed team, submit a maximum of ten (10) recently completed projects (see definitions), that best demonstrate the overall team experience in performing the primary and secondary A-E services for project types identified for this contract. Provide the month and year of completion of the professional services for each project. Projects shall have been performed by the office(s)/branch(es) identified in SF330, Part 1, Section C. Projects not meeting these requirements will not be considered. To enable verification, firms should include the DUNS number along with each firm name in the SF330 Part I, Section F, Block 25. If the project is a Department of Defense/Government contract, include the complete contract number, including the task order number if applicable. In SF330, Part 1, Section F, Block 24, submit a description of the project, including: 1) Type of project and its relevance to the scope of this contract; 2) Specific relevant A-E services performed by the firm; 3) Construction cost; 4) Relevant sustainable features (see definition) incorporated in the project (if none or if not applicable to the project, affirmatively state so). For projects with LEED or equivalent sustainability certification, submit copies of the certificate or other supporting documentation (not counted in the 30-page limitation); and 5) A-E fees for the project. Firms with multiple offices shall indicate which office/branch performed the A-E services. Additional requirements: - At least three (3) projects shall demonstrate relevant experience with projects having professional fees of $500,000 or greater. - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS) with microgrid (see definition). - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS) with airfield lighting. - At least one (1) project shall demonstrate relevant design experience (i.e. full plans and specs, not including PCAS services) with HVAC projects containing DDC, hydronic hot water and hydronic chilled water systems. - At least one (1) project that demonstrates relevant experience with the preparation of Request for Proposal for Design-Build or with design (i.e. full plans and specs, not including PCAS services) for each of the following: o Exterior electrical power systems with a minimum of 15kV (i.e., overhead and underground distribution systems, primary and secondary substations, emergency generators, etc.) o Fire Protection System and life safety features for a facility Note: A single project may satisfy more than one of the above minimum requirements. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a stand-alone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. Recent is defined as professional services completed during the period of June 2, 2011 through June 1, 2016. Projects must be complete as of the SF330 due date. Completion is defined as the date that the final design or design-build package was completed, or the date that the study/investigation/report was completed and submitted, and does not include construction support services. Projects not meeting the above requirements will not be considered. If the proposed team is a joint venture (JV), submit information for relevant projects completed by the JV entity. If the JV does not have shared experience, projects may be submitted for each of the JV partners. In any case, do not exceed the ten (10) project limitation. In cases where the submitted project was performed by a JV, but all JV partners for that project are not on the team identified in Part I, Section C, specifically describe the relevant work performed by the JV partner(s) proposed for this contract. In all cases, clearly describe the specific relevant work self-performed by the proposing firm and the firms roles and responsibilities on the project; do not include work that is not attributable to the proposing firm. If the project description does not clearly delineate the work performed by the entity/entities teaming on this contract, the project may not be considered. SF330, Part 1, Section G, Key Personnel Participation in Example Projects: Submit in accordance with the SF330 Instructions. From the total projects listed in Section F, provide a maximum of ten (10) projects. SF330, Part 1, Section H, Additional Information requested by Agency. Address the remaining Criteria 3 through 8; additional sheets may be used (up to the 30 page limitation for Part 1) if required. See submission requirements. Clearly identify the Criterion number and title. CRITERION 3, CAPACITY: The evaluation will consider the Offerors capacity to accomplish the work in the required time. Submission Requirements: Submit a narrative that demonstrates the firms capacity to accomplish work in the required time frames. Address key elements by identifying and discussing: 1) Present workload and capability to integrate work under this contract with other work; 2) Availability of the project team (including subcontractors) for the specified contract performance period; 3) Capacity to accomplish multiple large task orders simultaneously with overlapping delivery dates; and 4) Strategy to meet surges in unexpected workload demand. CRITERION 4, PAST PERFORMANCE: The evaluation will consider the Offerors past performance on relevant Government and/or commercial projects regarding quality of work, cost control, compliance with performance schedules, and customer satisfaction, with emphasis on example projects presented in Section F. The evaluation will be based on past performance assessments and other available past performance information. Points of contact provided in the proposal may be contacted. Where there is no record of past performance, the proposal will be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative to demonstrate Offerors past performance in effective project cost control: 1) Describe the firms cost estimating procedures and project cost control methods. Note: this refers to estimating and controlling the cost of the construction, and does not refer to the labor cost of performing the design services; and 2) Provide budget amounts, final construction cost estimates, and actual construction contract award amounts for at least five (5) projects submitted in Section F. Explain any differences between estimated and actual costs. For projects provided as experience in Section F, list and provide copies of any applicable design awards received (not counted in the 30-page limitation). Clearly indicate to which Section F project the award applies; otherwise the information may not be considered. Submit an A-E Contractor Appraisal Support System (ACASS), Contractor Performance Assessment Report System (CPARS), or a Past Performance Questionnaire (PPQ) evaluation for each project submitted under Criterion 2. If a completed ACASS/CPARS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS/CPARS evaluation, the PPQ included with this notice is provided for the Offeror or its team members to submit to the client for each project. If a PPQ is submitted, but an official ACASS/CPARS evaluation is found for that project in government databases, the official evaluation will take precedence. If an ACASS/CPARS evaluation is not available, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF330. If the A-E is unable to obtain a completed PPQ from a client for a project before the response date set forth in this notice, the A-E should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and client information for the respective projects. A-Es should follow-up with clients/references to ensure timely submittal of questionnaires. If the client requests, questionnaires may be submitted directly to the Governments point of contact, Naval Facilities Engineering Command Southwest, Code RAQ20.EP, Attn: Elliott Penetrante, via email at elliott.penetrante@navy.mil, prior to the response date. A-Es shall not incorporate by reference into their response ACASS/CPARS or PPQ evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted ACASS/CPARS and PPQ evaluations will not be counted as part of the 30 page limitation and shall be attached to the SF330, behind the SF330 Part II document. CRITERION 5, LOCATION AND KNOWLEDGE OF THE LOCALITY: The evaluation will consider the teams location, demonstrated knowledge of and project experience within the geographic areas where projects are anticipated for this contract. The preponderance of the work will be at Navy and Marine Corps installations in southern California. Prime AE firms with a local office in southern California may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative that demonstrates the teams knowledge of and project experience within the geographic locations for anticipated projects on this contract. Include: 1) Location of the Offerors main office and any branch offices and subcontractor offices that will be utilized for this contract; 2) Description of teams knowledge of, and project experience within, the targeted geographic areas; and 3) Description of teams availability and ability to ensure timely response to requests for onsite support at Government installations throughout the NAVFAC SW AOR. CRITERION 6, QUALITY CONTROL: The evaluation will consider the Offerors Design Quality Control (DQC) program for ensuring technical accuracy of the A-E work product and effective cross-coordination among various design disciplines. Firms that demonstrate a QC process that will minimize the governments quality assurance (QA) effort in reviewing the A-Es work product may be considered more favorably in the evaluation. Submission Requirement: Submit a narrative that describes the DQC program that the prime A-E firm uses to ensure technical integrity of provided services. Address key elements by identifying and describing: 1) Offerors QC program that is used to ensure technical accuracy, effective coordination, and consistency of the A-Es work product across all disciplines (including subcontractors); and 2) Process used for checking documents for coordination errors, omissions, conflicts, and discrepancies in the design/report documents; tracking changes and incorporating review comments. For offerors who are joint ventures and/or teams with offices in a variety of locations, describe how the QC effort will be implemented across the various team offices. Describe from which office the QC program will be managed/coordinated and the plan/methods to ensure effective QC and communication between offices. CRITERIA 7, UTILIZATION OF SMALL BUSINESS: (To be addressed by all firms, including small businesses). Utilization of small business concerns as subcontractors shall be evaluated. Firms that demonstrate a high level of utilization of small business in subcontractor roles work may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that demonstrates commitment and use of small business concerns as subcontractors on this contract. Address the key elements by identifying and discussing: 1) Commitment to the following small business subcontracting goals: Small Business (SB) 66.94%; Small Disadvantaged Business 17.44%; Woman- Owned Small Business 15.45%; HUBZone Small Business 9.03%; and Service- Disabled Veteran-Owned Small Business/Veteran Owned Small Business 3.06%; 2) How the small business, listed as subcontractor in your SF330, will meet the subcontracting goal for each socio-economic category(ies); and 3) Type of service the subcontractor performs and list of subcontracting percentages the subcontractor will meet in their respective socio-economic category. Show subcontractor name, DUNS number, small business socio-economic category, and type of service to be perform in this contract. Note: Firms slated for an interview will be required to submit a subcontracting plan that reflects a minimum of the subcontracting goals and subcontractors stated above prior to the interview. CRITERION 8, VOLUME OF WORK: The evaluation will consider the volume of DoD work awarded to the prime A-E in the past 12 months with the objective of equitably distributing contracts among A-E firms, including minority-owned firms and firms without prior DoD contracts. Submission Requirements: State the dollar amount of work previously awarded to the firm identified in the SF330 as the Prime by DOD in the past 12 months. Joint venture (JV) should list awards to the JV entity and separately list awards to each individual JV member for the time period. Do not include work performed as a subcontractor. SELECTION INTERVIEW REQUIREMENTS: Personal interviews may be scheduled for firms slated as most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in their SF 330 submittal. Elaborate presentations are not desired. Note that joint ventures (JV) slated for interviews will be required to provide a copy of their JV Agreement prior to the interview. ADDITIONAL INFORMATION: All information must be included in the submitted SF 330 package (cover letter, attachments, and excess information beyond the 30-page limit, unless otherwise excepted, will not be considered in the evaluation). System for Award Management (SAM) Database: In accordance with FAR 52.204-7, System for Award Management Registration, ensure your firm has an active SAM entity record. SAM is a Federal Government owned and operated free web site that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). SAM is the primary Government repository for current and prospective federal awardee information. Please complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code and DUNS or DUNS+4. Registration instructions and information can be accessed from the SAM home page at: https://www.sam.gov. In accordance with the Selection of Architects and Engineers (formerly the Brooks Act), the A-E firm must be a registered/licensed architectural and/or engineering firm. Provide evidence that your firm, subcontractor or proposed team members are permitted by law to practice the profession of Architecture and/or Engineering, i.e., State registration number, a brief explanation of the firms licensing in states that do not register firms, etc. Firms will be required to submit proof of required professional A-E registration/licensure prior to the interview phase of the selection process. This documentation is not counted as part of the 30-page limitation. A-E firms meeting the requirements described in this announcement are invited to submit a completed SF330 package per the submission requirements to the office shown below. The submittal package (original, plus 3 copies and 1 CD) shall be received in this office (NAVFAC Southwest, Attn: Elliott Penetrante, Code RAQ20.EP, 1220 Pacific Highway, San Diego, CA 92132) no later than, 2:00 P.M. Pacific Standard Time on June 1, 2016. Facsimile and emailed SF330 packages will not be accepted. Submittals received after this date and time will not be considered. THIS IS NOT A REQUEST FOR PROPOSAL. ALL INFORMATION NEEDED TO SUBMIT SF330 DOCUMENTS IS CONTAINED HEREIN. NO SOLICITATION PACKAGE, TECHNICAL INFORMATION, OR BIDDER/PLAN HOLDER LIST WILL BE ISSUED. It is the offerors responsibility to check the NAVFAC electronic solicitation website NECO (Navy Electronic Commerce Online) at: https://www.neco.navy.mil for any revisions to this announcement or other notices. Plan-holder list is available via the NECO website and an Interested Vendors List is available via the FedBizOpps website, www.fbo.gov, under this solicitation number. Address inquiries via email: elliott.penetrante@navy.mil or via telephone: 619-532-2967. *** END OF ANNOUNCEMENT *** DEFINITIONS OF TERMS: SEE ATTACHMENT SYNOPSIS DOCUMENT

70 -- Dell Equipment and accessories

Department of the Navy, Space and Naval Warfare Systems Command | Published July 21, 2016  -  Deadline July 28, 2016
cpvs

This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. This is a Total Small Business Set Aside (FAR 52.219-6). Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a Small Business will not be considered for award. Competitive quotes are being requested under N66001-16-T-6772. This requirement is set-aside for small businesses, NAICS code is 334111 and the size standard is 1250 employees. Basis of award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable. "QUOTE BRAND NAME or EQUAL SPECIFICATIONS" Item 0001 Dell OptiPlex 7040 Micro Form Factor XCTO 210-AFGG Qty; 10 Each Minimum Specifications: Security: TPM 2.0 (out of the box) Form Factor: Micro Support: 3-yr 24x7 phone 9-5 onsite, 3-yr accidental damage, and 3-yr hard drive retention Processor/CPU: Intel Core i7 6700 series (4-cores, up to 4 GHz) Memory/RAM: DDR4 16 GB (up to 2133 MHz) Hard Drive: 512 GB PCIe NVMe solid state Video: Integrated (Intel HD 530) Video Ports: One DisplayPort, and one HDMI Audio: Integrated Network: Integrated, wired, and gigabit ethernet (no wireless) Connectivity Ports: USB 3.0, universal audio jack, and line out jack Keyboard: wired, and USB connector Mouse: wired, USB connector, and three button Speakers: Monitor mounted speakers Special Notes: -Security: TPM 2.0 is required to meet DISA Windows 10 security requirements. Computer must be TPM 2.0 compliant out of the box. TPM 1.2 with a BIOS upgrade option is not technically acceptable. -Form Factor: Computer dimensions must be smaller than FlexATX standards (229 191 mm) to support working in confined workspaces. -Processor, Memory, and Hard Drive: The i7 6700 series, 16 GB of RAM, and PCIe NVMe solid state drives are required to support high-bandwidth and high-throughput requirements of several Hyper-V virtual machines for software development. -Video: The Intel HD 530 integrated video cannot be substituted because it is part of, and embedded within the CPU. -Connectivity Ports: There must be at least four USB 3.0 ports to support a keyboard, mouse, external optical media device, and a backup hard drive. -Speakers: The speakers must be able to connect with the monitor to support working in confined workspaces. Item 0002 Brand Name or Equal to Dell 23" Monitor P2317H 332-2877 Qty: 20 Each Minimum Specifications: Size: 23-in (22-in minimum, 24-in maximum) Aspect Ratio: Wide (16:9) Backlight: LED Screen: Antiglare Panel: In-Plane Switching (IPS) Maximum Resolution: 1920 x 1080 or higher Contrast Ratio: 1000:1 or higher Brightness: 250 or higher Response Time: 6 ms or lower Color Depth: 16.7 million or higher Input #1: DisplayPort v1.2 Input #2: HDMI v1.4 Input #3: optional Input #4: optional Speaker Mount Connector: Yes Stand: Height, tilt, swivel, and pivot adjustable VESA Standard: 100 x 100 Lync/Skype Compatible: No Integrated Speakers: No Special Notes: -Size: 23 inches is the optimal size for supporting confined workspaces, while also rendering a 3D world globe with sufficient detail. -Panel: The IPS panel provides a wide viewing angle to support over the shoulder viewing. -Color Depth: 16.7 million colors is the minimum required to display satellite images accurately. -Lync/Skype Compatible: No. Monitor must not have an integrated video camera or microphone because they will operate within classified, secure rooms. Item 0003 Dell External USB Slim DVD+/- RW Optical Drive PN: 429-AAUX Qty: 10 Each Minimum Specifications: External Optical Storage: Device must be powered by USB. Device must be capable of burning up to 4.7 GB of data or higher. Special Notes: device must be powered by USB to support a confined workspace with minimal power outlets. Item 0004 Dell Portable Backup Hard Drive 2TB 784-BBBD Qty: 10 Each Minimum Specifications: External Backup Hard Drive: Device must be powered by USB. Device must be USB 3.0 compatible. Device must be four (4) times larger than computer's hard drive. Special Notes: -The device must be powered by USB to support a confined workspace with minimal power outlets. -Device must be USB 3.0 compatible to interface with the computer's USB 3.0 connectors. -Device must be capable of storing four (4) times the amount of the computer's hard drive to support four full backups per month. Item 0005 Dell AC511 Stereo SoundBar USB 322-0012 Qty: 10 Each Minimum Specifications: External Speaker: The speaker must be able to connect with, and be powered by one of the monitors. Special Notes: speaker must be able to connect with the monitor to support working in confined workspaces. Item 0006 Dell OptiPlex Micro Vertical Stand - system desk stand for OptiPlex 482-BBBR Qty: 10 Each Minimum Specifications: Computer Stand: The computer stand must mount and mate seamlessly with the computer case and allow the computer to stand vertically. Special Notes: The stand allows to the computer to sit vertically and keep it stable to minimize damage from the computer falling over. The vertical stand supports working in confined workspaces. Item 0007 McMaster-Carr Low Profile Strobe Light, Surface Mount, 120V AC, Amber 5947T35 Qty: 4 Each Minimum Specifications: Strobe Light Pattern: Strobe Color: Amber/Orange Bulb Type: Xenon Mount Type: Surface Base Material: Zinc Alloy Voltage: 120V AC Height: 2 5/8" Width: 5 1/16" Depth: 2 5/16" Amps: 0.06 Candlepower: 30 Item 0008 McMaster-Carr Light Switch, Rocker, 15 Amps, 3-Way, White 7030K46 Qty: 4 Each Minimum Specifications: Light Switch Style/Type: Rocker Color: White # of Circuits: 3-Way # of Terminals: 3 Amp Rating: 20 (@ 120/277V AC) Item 0009 McMaster-Carr Low Voltage Metal Push-Button Switch, Surface Mount, SPST-NO, Momentary, White Button 69755K71 Qty: 2 Each Minimum Specifications: Push-Button Switch Style/Type: Surface Mount Button Type: Spring Back (momentary) Circuit Type: Off to On (SPST-NO) Color: White Amp Rating: 3 (@ 16V AC and DC) Max Voltage: 16V AC Height: 3/4" Width: 1" Length: 2 3/4" Item 0010 Mallory Sonalert Mounting Hardware Accessory-SC Series Mounting Bracket ACC01 / Mouser 539-ACC01 Qty: 8 Each Minimum Specifications: Mounting Bracket Style: 'L' Style Type: Panel Material: Aluminum Mounting Hole Size: 1.192" Height: Refer to picture for dimensions (measurements are in Inches) Item 0011 Mallory Sonalert Audio Indicators & Alerts SLOW PULSE, 6-28VAC XLOUD, CUL APPRVD SC628ANJR/ Mouser 539-SC628ANJR Quote: 4 Each Minimum Specifications: Buzzer Sound Level Category: Loud Mode of Operation: Slow Pulse Voltage Rating: 6-28 V AC/DC Frequency: 2900 Hz Loudness: 80-95 dB(A) @ 2' Current Draw: 4-30 mA Pulse Rate: .5-2 PPS Duty Cycle: 50 (%) Housing: 6/6 Nylon Color: Black Height: Refer to picture for dimensions (measurements are in Inches) Item 0012 Mallory Sonalert Audio Indicators & Alerts FAST PULSE, 6-28VAC XLOUD, CUL APPRVD SC628ANPR/ Mouser 539-SC628ANPR Qty: 4 Each Minimum Specifications: Buzzer Sound Level Category: Loud Mode of Operation: Fast Pulse Voltage Rating: 6-28 V AC/DC Frequency: 2900 Hz Loudness: 80-95 dB(A) @ 2' Current Draw: 4-30 mA Pulse Rate: 2-9 PPS Duty Cycle: 50 % Housing: 6/6 Nylon Color: Black Height: Refer to picture for dimensions (measurements are in Inches) Item 0013 EATON 9PX 2-POST Rail Kit RK2PC Qty: 6 Each Minimum Specifications: UPS Rail Kit Type: Two-post Compatibility: 5 and 6 kVA UPS Special Notes: rail kit supports a two-post communication rack, which is different from a four-post, standard server rack. It must be compatible with the Extended Battery Module outlined below (Row 46). Item 0014 EATON 9PX 6FT 6K EBM Cable EBMCBL180 Qty: 3 Each Minimum Specifications: Extension Cable Type: Extended battery module cable Compatibility: 5 and 6 kVA UPS Length: 6' Special Notes: cable must seamlessly integrate the UPS and Extended Battery Module outlined below (Rows 45 and 46). Item 0015 C2G 3FT 16 AWG 250 VOLT Computer Power Extension Cord (IEC320C14 TO IEC320C13) 29966 Qty: 48 Each Minimum Specifications: Extension Power Cord Type: Computer Coupler/Connector 1: C14 IEC Coupler/Connector 2: C13 IEC Wire Gauge: 16AWG/3C Length: 3' Amp Rating: 13A Voltage Rating: 250V Special Notes: cables are used to connect servers with the Enclosure Power Distribution Unit outlined below (Row 44). Item 0016 C2G 6FT 16 AWG 250 VOLT Computer Power Extension Cord (IEC320C14 TO IEC320C13) 29967 Qty: 48 Each Minimum Specifications: Extension Power Cord Type: Computer Coupler/Connector 1: C14 IEC Coupler/Connector 2: C13 IEC Wire Gauge: 16AWG/3C Length: 6' Amp Rating: 13A Voltage Rating: 250V Special Notes: cables are used to connect servers with the Enclosure Power Distribution Unit outlined below (Row 44). Item 0017 StarTech 100PK of M6 Mounting Screws and M6 Cage Nuts M6X12MM Black CABSCREWM62B Qty: 1 Pack Minimum Specifications: Package of Screws and Cage Nuts Style/Type: M6 x 12mm Construction: Steel Thread: M6 Width: 0.2 in (6 mm) Length: 0.5 in (12 mm) Qty/Pkg: 100 Item 0018 C2G 6FT C2G DisplayPort Cable M/M BLK 54401 Qty: 10 Each Minimum Specifications: Computer Video Cable Type: DisplayPort Coupler/Connector 1: DisplayPort male with latches Coupler/Connector 2: DisplayPort male with latches Length: 6' Resolution Support: 4k/Ultra High Definition (UHD) Standards: DisplayPort v1.2 Item 0019 C2G 6FT High Speed HDMI R Cable with ETHER 56783 Qty: 11 Each Computer Video Cable Type: HDMI Coupler/Connector 1: HDMI male Coupler/Connector 2: HDMI male Length: 6' Resolution Support: 4k/Ultra High Definition (UHD) Bandwidth/Velocity Propagation: 10.2Gbp Item 0020 StarTech 3FT Mini DisplayPort to Mini DisplayPort M/M MDISPLPORT3 Qty: 10 Each Computer Video Cable Type: Mini DisplayPort Coupler/Connector 1: Mini DisplayPort male Coupler/Connector 2: Mini DisplayPort male Length: 3' Resolution Support: 4k/Ultra High Definition (UHD) Standards: DisplayPort v1.2 Item 0021 Samsung WMN4270SD, Wall Mount for 40'' LCD WMN4270SD Qty: 2 Each Wall Mount for LCD Display VESA Standard: 400 x 400 Compatibility: Samsung 46-55" DB, DC, DM, DH, ED, ME, MD, UE, PE and LE Series Models Width: 465 mm Height: 460 mm Depth: 24.5 mm Special Notes: wall mount must be compatible with the Professional/Commercial Digital Signage outlined below (Row 43). Item 0022 Samsung DM-E Series 55" Slim Direct-Lit LED Display DM55E Qty: 2 Each Minimum Specifications: Professional/Commercial Digital Signage Input #1: DisplayPort v1.2 Input #2: HDMI v1.4 Input #3: VGA Contrast Ratio: 2000:1 or higher Brightness: 350 or higher 24/7 Operation: Yes Chassis Type: Ultra slim (2.25" or less) Panel Size: 55-in Aspect Ratio: Wide (16:9) Backlight: LED Backlight Type: Direct/Back-lit Maximum Resolution: 1920 x 1080 or higher Response Time: 8 ms or lower TV Tuner: Yes (built-in) Wi-Fi: Yes (built-in) Video Wall Support: Yes, up to 15x15 panels VESA Standard: 400 x 400 Speakers: Yes (built-in) Input #4: DVI-D Input #5: RJ45 (LAN) Input #6: RS232C Input #7: Stereo mini jack Input #8: optional Output #1: DisplayPort v1.2 Output #2: RS232C Output #3: Stereo mini jack Output #4: optional Special Notes: -Input #1, 2 and #3: The DisplayPort v1.2, HDMI, and VGA input is required to support NMCI laptops. -Contrast Ratio and Brightness: High contrast and brightness is required to support presentations in a brightly lit room. -24/7 Operation: Continuous operation is required to support repeating slideshows and looping presentations, which function as a greeting device. Item 0023 Eaton ePDU Basic 20-Outlets 4.99kW PDU EPBZ79 Qty: 3 Each Minimum Specification: Enclosure Power Distribution Unit Input Plug: One (1) NEMA L6-30P Input Voltage: 1-phase 200-250V Input Current: 24A Input Phase: Single phase Input Frequency: 47-63 Hz Output Circuit Breakers: Two (2) 20A Input Cable Length: 15' Output Outlets: Sixteen (16) C13 IEC and four (4) C19 IEC Integrated IEC Outlet Grips: Yes Form Factor: Low-profile Height: 1.7" Width: 17" Depth: 5.1" Mounting Position: Horizontal Input Max kW: 4.99 Standard: UL listed Color-Coded Outlet Sections: Yes LCD Display: Yes Special Notes: Input Plug, Voltage, Current, Phase, Frequency, and Output Circuit Breakers are required to support the existing electrical grid. This component must be compatible with the UPS (Row 45). Item 0024 Eaton UPS - AC 200/208/220/230/240 V - 5.4 kW - 6000 VA 9PX6KP1 Qty: 3 Each Uninterruptable Power Supply (UPS) Power Rating (VA): 6000 Power Rating (W): 5400 Input Plug: NEMA L6-30P Input Voltage: 200-250V Input Frequency: 47-63 Hz Output Voltage: 120/208V Output Frequency: 50/60 Hz Output Receptacles: Six (6) 5-20R, one (1) L6-30R, and one (1) L14-30R Circuit Breaker: two (2) 20A 5-20R, one (1) 30A L6-30R; and one (1) 30A L14-30R Runtime (@3000W): 5 minutes or more UPS Bypass: Yes Remote Emergency Power Off (REPO): Yes Diagnostic Type: Full self-test on start Efficiency: 90% or higher Extended Battery Module Compatibility: Yes Communication Ports: RS-232 and RJ45 Network Communication: Yes Height: 10.2" Width: 17.3" Depth: 28.4" RoHS Compliant: Yes Surge Protection: IEEE ANSI C62.41 Cat B2 Special Notes: -Power Rating (VA), Power Rating (W), Input Plug, Input Voltage, Input Frequency, Output Voltage, Output Frequency, Output Receptacles, and Circuit Breakers are required to support the existing electrical grid. -Runtime (@3000W) is required to support equipment safety, while response personnel power down systems. Item 0025 Eaton Battery enclosure ( rack-mountable ) lead acid - 3U - for Eaton 9PXEBM180RT Qty: 3 Each Extended Battery Module Runtime (@3000W): 30 minutes or more Extended Battery Module Compatibility: Yes Height: 5.1" Width: 17.3" Depth: 25.4" Special Notes: The key requirement here is plug and play integration and compatibility with the UPS (Row 45) to provide extended runtime up to 30 minutes at 3000W. This ensures response personnel at different locations around the Seaside campus can arrive in time to safely power down systems. Item 00026 Eaton ETN-ENC482442S Eaton S-Series Rack ETN-ENC482442S Qty: 3 Each Server Rack Height: 48U Width: 24" Depth: 42" Bayed Enclosure: Yes Frame Type: Steel, and fully welded Cable Management: Built into frame Door Locks: High security lock compatible EIA-310 Compatible: Yes Front Door: Single, perforated, and high flow Rear Door: Split, perforated, and high flow Top Panel: Solid with cable egress for power and network Weight Capacity: 3,000 lbs. Special Notes: Height, Width, Depth, Bayed Enclosure, Frame Type, Cable Management, and Door Locks is required to seamlessly integrate racks into existing enclave and preserve enclosure security in the classified secure room. Item 0027 Eaton ETN-ACC4842DP S-Series Divider Panel ETN-ACC4842DP Qty: 2 Each Server Rack Divider Panel Height: 48U Depth: 42" Divider Type: Solid Special Notes: The server rack divider panel functions as an internal separator for individual racks within a rack row. It must seamlessly integrate with the server rack (Row 47) to maintain enclosure security for the classified secure room. Item 0028 Eaton ETN-ACC4842SP S-Series Side Panel ETN-ACC4842SP Qty: 3 Each Server Rack Side Panel Height: 48U Depth: 42" Side Type: Solid Special Notes: The server rack side panel functions as an end cap to the rack row. It must seamlessly integrate with the server rack to maintain enclosure security for the classified secure room. Item 0029 Kingston 60GB SSDNOW KC380 SSD MICRO SATA 3 1.8 SKC380S3/60G Qty: 48 Each Internal Hard Drive Type: Solid State Drive (SSD) Form Factor: 1.8" Interface: SATA 3 (6Gb/s) Capacity: 60 GB or higher Sequential Read/Write: 400/400 MB/s or higher Random Read/Write: 40,000/10,000 IOPS or higher Sequential 4k Read/Write: 60,000/60,000 IOPS or higher Random 4k Read/Write: 10,000/40,000 IOPS or higher Total Bytes Written (TBW): 2000 or higher Mean Time Between Failure (MTBF): 1 million or higher Special Notes: Form Factor and Interface are required to interoperate with existing computers. Item 0030 C2G 3ft 14AWG 250 Volt Power Extension Cord 10339 Qty: 12 Each Extension Power Cord Type: Computer Coupler/Connector 1: C20 IEC Coupler/Connector 2: C19 IEC Wire Gauge: 14AWG/3C Length: 3' Amp Rating: 15A Voltage Rating: 250V Special Notes: These cables are used to connect servers with the Enclosure Power Distribution Unit Item 0031 C2G 6ft 14AWG 250 Volt Power Extension Cord 30821 Qty: 12 Each Extension Power Cord Type: Computer Coupler/Connector 1: C20 IEC Coupler/Connector 2: C19 IEC Wire Gauge: 14AWG/3C Length: 6' Amp Rating: 15A Voltage Rating: 250V Special Notes: These are used to connect servers with the Enclosure Power Distribution Unit To be considered for award, the offeror certifies that the product(s) being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant. " Note: "Vendor must provide at time of submission of quote their authorized distributor information (POC, phone number) and/or any documentation supporting that the items are actually coming from that distributor, i.e. certification, letter or copy of invoice. Failure to provide such proof will be treated as non-responsive and your quote(s) will not be considered for award." Vendors: Make sure to reference the following information in the quote: a. Dun & Bradstreet number b. Cage Code c. Business Size / Naics Size d. RFQ Number N66001-16-T-6772 e. Requested Delivery date: 30 days after receipt of order (ARO) f. Preferred method of shipment: FOB Destination. Ship to Address: SPAWAR Systems Center Pacific Receiving Officer 4297 Pacific Highway, Bldg OT7 San Diego, CA 92110-5000 This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-81 (08/03/2015) and Defense Federal Acquisition Regulation Supplement (DFARS), June 26, 2015. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The following clauses shown below can be accessed in full text at www.farsite.hill.af.mil/: 52.204-2, Security Requirements 52.204-6, Data Universal Numbering System (DUNS) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.212-1, Instructions to Offerors Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3, Offeror Representations and Certifications - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation 2013-O0019) (July 2014) 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child LaborCooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)) 52.223-15, Energy Efficiency In Energy-Consuming Products 52.223-16, Acquisition of EPEAT-Registered Personal Computer Products 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds TransferSystem for Award Management 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.239-1, Privacy or Security Safeguards 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7000, Disclosure of Information 252.204-7004 Alternate A, System for Award Management 252.204-7012, Safeguarding of Unclassified Controlled Technical Information 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law. 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.212-7000, Offeror Representations and Certifications--Commercial Items 252.225-7001, Buy American and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.203-7998 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements? Representation. (DEVIATION 2015-O0010) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS? REPRESENTATION (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or age

A-E IDIQ MECHANICAL, ELECTRICAL AND PLUMPING (MEP) ENGINEERING SERVICES, SMALL BUSINESS SET-ASIDE FOR VARIOUS PROJECTS, NAVFAC SOUTHWEST

Department of the Navy, Naval Facilities Engineering Command | Published February 5, 2014  -  Deadline March 11, 2014
cpvs

ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM (SF) 330, ARCHITECT-ENGINEER QUALIFICATIONS, IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSAL (RFP) PACKAGE TO DOWNLOAD. This is Small Business Set-Aside. Architect-Engineer (A-E) services are required for a firm fixed-price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Mechanical, Electrical and Plumbing (MEP) Engineering. The work for this contract shall occur at various Navy and Marine Corps facilities and other military installations located in the NAVFAC Southwest Area of Responsibility (AOR): California, Arizona, Nevada, Colorado, New Mexico and Utah. The preponderance of the work will be in Southern California. The Offeror/Contractor must demonstrate adequate in-house staffing capable to self-perform at least 50 percent of the cost of the contract as required by FAR Clause 52.219-14 (b)(1) Limitation on Subcontracting. A-E Design and Engineering Services shall mainly provide for, but not be limited to, MECHANICAL, ELECTRICAL AND PLUMBING ENGINEERING related services. All A-E services will be in accordance with the scope of this contract, applicable references, and Unified Facilities Criteria (UFC). For this contract, the lead discipline shall be a registered Mechanical or Electrical Engineer. Primary A-E services will include, but are not limited to, preparation of Requests for Proposals (RFP) for Design Build (DB) projects; Design-Bid-Build (DBB) construction contract packages (i.e., drawings, specifications, basis of design, design analysis, engineering calculations, cost estimate, etc.); Site Investigations / Studies / Surveys; Reports from studies, surveys and/or site investigations; design and construction quality control support services; addressing constructability issues, such as, phasing of work in occupied and unoccupied facilities and disruption of both utilities and operations of the site and building occupants during construction. Secondary A-E services include technical reviews of Government prepared RFP package for DB projects and Government prepared design documents for DBB projects; antiterrorism; Post Construction Award Services (PCAS); Fire Protection Engineering Designs, Studies, Surveys and Site Investigation; fire risk/hazard analysis; life safety code analysis; fire modeling and engineering documentation; and final inspections and tests of installed Fire Protection Systems. Fire Protection surveys shall be conducted within the guidelines established by OPNAVINST 11320.23F. Support services may include incidental architectural, fire protection, civil, geotechnical, environmental, and structural work as well as identification and abatement methods of existing asbestos containing materials, lead-based paint and other hazardous materials. Primary type of projects will include, but is not limited to, Energy Master Planning; Commissioning; Retro-commissioning; Life Cycle Cost; Solar systems and cogeneration; LEED, and Title 24 Energy Compliance documents; new installation or repair/renovation of heating, ventilation, air conditioning and control systems; direct digital control schematic and architecture; exhaust systems; above and below ground steam distribution; high temperature/pressure water; refrigeration systems; natural gas (including earthquake shut off valves); water (including backflow preventer); plumbing systems; building electric power; communication; cable TV; electronic security; fire alarm; and lighting systems for operational and training, commercial, institutional, industrial, research development, and quality of life facilities. Secondary type of projects include industrial ventilation; compressed air; medical gas; oxygen; acetylene lubricant; fuel pumping distribution systems; sprinkler system; fire alarm and detection systems; and fire resistant building assemblies. The maximum contract value may not exceed $30,000,000 aggregate total. The minimum guarantee for the contract shall be $5,000. The minimum guarantee for the entire contract term (including option years) will be satisfied by the award of the initial task order. The minimum value of individual task orders executed under this contract is $200,000. The maximum value of individual task orders executed under this contract is $2,500,000. There will be no dollar limit per year. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Contract term is for a one-year base period with four option periods. Each performance period will run 365 (366 for leap year) calendar days. The hourly rates will be negotiated for each performance period. The Government may exercise the option period unilaterally. Per NFAS 17.208-100(c) (1), options for post construction award services may be negotiated on individual task orders for unilateral exercise. The estimated start date is October, 2014. This procurement is Small Business Set-Aside. The NAICS Code for this procurement is 541330 (Engineering Services) and the annual small business size standard is $14 Million. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. The contractor is not guaranteed work in excess of the minimum guarantee. Firms that design or prepare specifications for a construction contract or task order issued under the resulting contract are prohibited from providing the subsequent construction. This limitation also applies to subsidiaries/affiliates of the firm. SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS: Brooks Act (PL 92-582) and Federal Acquisition Regulations (FAR) Part 36.6 selection procedures apply. The evaluation and selection will be based on the following criteria: Criterion 1, Professional Qualifications; Criterion 2, Specialized Experience and Technical Competence; Criterion 3, Capacity; Criterion 4, Past Performance; Criterion 5, Location and Knowledge of the Locality; Criterion 6, Quality Control; and Criterion 7, Volume of Work. SF 330s will be evaluated to determine the most highly qualified firm based on criterion responses. Criteria 1 and 2 are considered most important and equal among themselves; Criteria 3, 4, 5, and 6 are slightly less important and listed in descending order of importance; and Criteria 7 is of lesser importance and will be used as tiebreaker among technically equal firms. Evaluating past performance and experience may include information provided by the firm, customer inquiries, Government databases, and publicly available sources. Failure to provide requested data, accessible points of contact, or valid phone numbers could result in a firm being considered less qualified. In evaluating an Offeror's capability, the Government shall consider how well the offeror complied with these instructions. All projects provided in the SF 330 (Architect-Engineer Qualifications) must be completed by the office/branch/individual team member actually performing the work under this contract. Projects not performed by the office/branch/individual team member will be excluded from evaluation consideration. Submission Requirements: The SF 330 Part 1 is limited to 30, 8.5"x11" single-sided pages. Minimum font size is 10. Submit the following: a) One (1) original and two (2) copies of the SF 330 for the prime offeror (which also includes a completed Part II for the firm and key subcontractors) addressing the following selection criterion information; and b) one compact disk copy, in Adobe Acrobat format, of the complete SF330 being submitted by the firm. The organization chart, A-E Contractor Appraisal Support System (ACASS) and Past Performance Questionnaire (PPQ) evaluations shall not be counted as part of the 30 page limitation SF330, Part 1, Section B: Contract Information: In Block 5, list firm's Dun and Bradstreet Number in addition to the name of the firm. SF330, Part 1, Section D: Organization Chart: In addition to the Instructions provided for the SF 330, (i.e. the names and roles of all key personnel in this contract/solicitation and the firm they are associated with), identify the overall relationship and lines of authority of the proposed team, including key subcontractors. (Note: All individuals listed on the organization chart are not required to have a resume in Section E, such as administrative or lower level engineering positions.) This chart shall not be counted as part of the 30 page limitation. This chart must be affixed to the submittal to avoid separation in handling. SF 330, Part 1, Section E, Resumes of Key Personnel; CRITERION 1, PROFESSIONAL QUALIFICATIONS: Professional qualifications of the proposed team members assigned to this contract in A-E services including the preparation of the required primary and secondary services in the types of projects specified shall be evaluated. The prime A-E firm shall have on staff a minimum of one Registered Mechanical and one Registered Electrical Engineers to perform the work anticipated under this contract. In addition the proposed team shall include one Certified Commissioning Agent, one LEED Accredited Professional (AP) and one Registered Fire Protection Engineer. The Project Lead shall be a registered Mechanical or Electrical Engineer and be an employee of the prime A-E firm under this contract. The primary member responsible for Sustainable Design shall be a LEED AP. Projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: Provide brief resumes of each proposed team member who will specifically perform the primary and secondary services for the type of projects listed above. Resumes of personnel performing only support services (as listed above) are not required and will not be reviewed. All key personnel must be professionally registered/accredited in their discipline; include the discipline, state, license number and the expiration date of registration. Provide the level of education achieved and the number of years engaged in the discipline. Identify the primary key personnel responsible for the Quality Control (QC) program and the primary LEED AP key personnel responsible for sustainable design. Each resume shall include a maximum of five (5) specific, recently completed projects, within the scope of projects anticipated for this contract, that best illustrate the individual member's qualifications in performing the listed primary and secondary A-E services. Resumes for the Quality Control and Sustainable Design personnel shall demonstrate their experience in that role for MEP projects. A specific project is a single project/function contract or a single task order under an Indefinite Delivery Indefinite Quantity or On-Call type Contract. "Recent" is defined as professional services (100% plans and specifications signed off by an Architect-Engineer and ready for construction with final cost estimate. Does not include any Post Construction Award Support (PCAS)) completed within the past five years prior to the SF330 due date (03/11/2009 or later for purposes of this synopsis). Projects not meeting these requirements will not be considered. Submit projects in which the key personnel performed a significant role. Submit a brief description of the project within block 19 of the SF330, Section E requirement. In addition, clearly address key elements for each project by describing: 1) The role and responsibilities of the key personnel in the project; and 2) The specific MEP engineering services performed by the key personnel in the project. SF 330, Part 1, Section F, Example Projects, CRITERION 2, SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: Specialized experience and technical competence of the proposed team members assigned to this project experienced in the preparation of the required primary and secondary services in the types of projects specified shall be evaluated. Projects completed by the prime A-E firm identified in Part I may be given more consideration in the evaluation process than projects of proposed subcontractors. Projects completed in California may be considered more favorably in the evaluation process. Submission Requirements: For the proposed team, submit a maximum of ten (10) specific, recently completed projects with an A-E fee within the task order range identified above, that best illustrate overall team experience in the required primary and secondary services in the types of MEP engineering projects listed above. A specific project is a single project/function contract or a single task order under an Indefinite Delivery Indefinite Quantity or On-Call type Contract. "Recent" is defined as professional services (100% plans and specifications signed off by an Architect-Engineer and ready for construction with final cost estimate. Does not include any Post Construction Award Support (PCAS)) completed within the past five years prior to the SF330 due date (03/11/2009 or later for purposes of this synopsis). Projects shall have been performed by the office(s) (main or branch) identified in Part 1, Section C. Projects not meeting these requirements will not be considered. If the project is a Department of Defense/Government contract, include the complete contract number, including the task order number if applicable. Submit a brief but explicit description of the project, project's relevance to the contract, and the A-E fee within block 24 of SF330, Section F. Firms with multiple offices shall indicate which office performed the services. In addition: - Submit at least one project demonstrating self-performance experience of a complete building retro-commissioning including Mechanical, Electrical and Plumbing systems. - Submit at least one project demonstrating self-performance design experience with Digital Direct Controls or Energy Management Control Systems schematic and architecture. - Submit at least one project demonstrating self-performance experience in the production of a Design-Bid-Build (DBB) construction contract packages (i.e., drawings, specifications, basis of design, design analysis, engineering calculations, cost estimate, etc.). If the proposed team is a joint venture (JV), information should be submitted as a joint venture; however, if there is no information for the joint venture, information should be submitted for each joint venture partner, while ensuring you do not exceed the maximum of ten (10) projects for the proposed team. If a project was performed by a joint venture, and all joint venture partners are not on the team proposed for this contract, the firm should specifically address the work performed by the joint venture partner teaming on this contract. Likewise, if the team member worked as a subcontractor on a project, the description should clearly describe the work actually performed by the team member and the roles and responsibilities of each on the project, rather than the work performed on the project as a whole. If the project description does not clearly delineate the work performed by the entity/entities teaming on this contract, the project could be eliminated from consideration. SF330, Part 1, Section G, Key Personnel Participation in Example Projects: Submit in accordance with the SF 330 Instructions. From the total projects listed in Section F, provide a maximum of ten (10) projects. SF330, Part 1, Section H, Additional Information requested by Agency. Address the remaining Criteria 3 through 7; additional sheets may be used up to the maximum of 30 total pages for Part 1, if required. See submission requirements. Clearly identify the Criterion number and title. CRITERION 3, CAPACITY: Capacity to accomplish the work in the required time shall be evaluated. Submission Requirements: Submit a narrative that demonstrates firm's capacity to accomplish work in required time frames. Address key elements by identifying and discussing: 1) Present workload; 2) Availability of the project team (including subcontractors) for the specified contract performance period; 3) Ability to perform the work to schedules; 4) Capacity to accomplish multiple, large and small tasks simultaneously; 5) Available specialized equipment; 6) Key personnel and team members' current and/or prior security clearances. CRITERION 4, PAST PERFORMANCE: Past performance with relevant contracts/projects with Government agencies and private industry in terms of cost control, quality of work, compliance with performance schedules with emphasis on example projects presented in Section F. Firms will be evaluated based on past performance assessments and other available information regarding past performance. Points of contact provided in other criteria may be contacted. A proposal with no record of relevant past performance information shall be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation process. Submission Requirements: Show past performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules. Submit an ACASS or a PPQ evaluation for each project listed under Criterion 2. If a completed ACASS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS evaluation, the PPQ included with this notice is provided for the offeror or its team members to submit to the client for each project. AN OFFEROR SHALL NOT SUBMIT A PPQ WHEN AN ACASS EVALUATION IS AVAILABLE. If an ACASS evaluation is not available, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF 330. If the offeror is unable to obtain a completed PPQ from a client for a project before the response date set forth in this notice, the offeror should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and client information for the respective projects. Offerors should follow-up with clients/references to ensure timely submittal of questionnaires. If the client requests, questionnaires may be submitted directly to the Government's point of contact, Naval Facilities Engineering Command Southwest, Code RAQ20.BK, Attn: Betty Kimes, via email at betty.kimes@navy.mil, prior to the response date. Offerors shall not incorporate by reference into their response PPQ or ACASS evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted ACASS and PPQ evaluations will not be counted as part of the 30 page limitation and shall be attached to the SF330, behind the SF330 Part II document. For each project provided as experience in Section F, list applicable awards and commendations. Submit a narrative to demonstrate quality of past performance in terms of the effectiveness of the cost control process. Describe the firm's overall cost estimating procedures, and identify the team member(s) who is/are responsible for implementing and monitoring this process. CRITERION 5, LOCATION AND KNOWLEDGE OF THE LOCALITY: Firm's location within and demonstrated knowledge of the general geographical areas in which projects could be located shall be evaluated. The work for this contract shall occur at various Navy and Marine Corps facilities and other military installations located in Arizona, California, Colorado, Nevada, New Mexico and Utah. The majority of work will be in Southern California. The prime A-E firm with a local office in Southern California may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that demonstrates the firm's knowledge of and experience in the general geographical area of this contract. Address key elements by identifying and discussing: 1) The location of the firm's main offices, branch offices, and sub consultants' offices; 2) The team's knowledge of and availability to work in the geographical area; and 3) Ability of the firm to ensure timely response to requests for onsite support. CRITERION 6, QUALITY CONTROL: Demonstration of the design Quality Control (QC) program used by the firm that ensures technical accuracy and cross coordination among disciplines shall be evaluated. Firms that demonstrate a QC process that minimize the government's effort to QA the A-E's work may be considered more favorably in the evaluation process. Submission Requirements: Submit a narrative that describes the design QC program used by the firm to ensure technical integrity of provided services. Address key elements by identifying and describing: 1) The QC process the team uses to ensure consistent quality work across the entire team (including subcontractors); and 2) The team's QC processes for checking documents for coordination errors, omissions, conflicts, and discrepancies in the design/report documents; tracking, and incorporating review comments. CRITERION 7, VOLUME OF WORK: Volume of DOD work awarded to the firm in past 12 months with objective of equitably distributing contracts among firms, including minority owned firms and firms without prior DOD contracts shall be evaluated. Submission Requirements: Provide a list of DOD contracts/task orders awarded in the last 12 months to the firm identified in the SF330 as the Prime. Joint ventures (JV) should list awards to the JV entity and separately list awards to each individual JV member for that time period. Do not include work performed as a Subcontractor. Include the dollar amount for each DOD contract/task order awarded. Firms with multiple offices shall indicate which branch office completed each project. Include agency phone numbers and points of contact. Joint ventures (JV) should list awards to the JV entity and separately list awards to each individual JV member for that time period. SELECTION INTERVIEW REQUIREMENTS: Personal interviews may be scheduled for firms slated as most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in the SF 330 submittal. Elaborate presentations are not desired. Please note Joint Ventures (JV) slated for interviews will be required to provide a copy of the JV Agreement prior to the interview. ADDITIONAL INFORMATION: All information must be included in the SF 330 package, (cover letter, attachments and excess number of pages will be excluded from the evaluation process). System for Award Management (SAM) Database: Ensure your firm has an active SAM entity record. SAM is a Federal Government owned and operated free web site that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). SAM is the primary Government repository for current and prospective federal awardee information. Please complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code and DUNS or DUNS+4. Registration instructions and information can be accessed from the SAM home page at: https://www.sam.gov In accordance with the Brooks Act, the AE Firm must be a registered/licensed architectural and/or engineering firm. Provide evidence that your firm, subcontractor or proposed team members are permitted by law to practice the profession of Architecture or Engineering, i.e. State registration number, a brief explanation of the firm's licensing in states that do not register firms, etc. Architect-Engineer firms which meet the requirements described in this announcement are invited to submit a completed SF330 package per the submission requirements to the office shown below. One copy of the submittal package (original, plus 2 copies and 1 CD) is to be received in this office (NAVFAC Southwest, Attn: Betty Kimes, Code RAQ20.BK 1220 Pacific Highway , San Diego, CA 92132) no later than, 2:00 P.M. Pacific Standard Time on TUESDAY, MARCH 11, 2014, in order to be considered. Facsimile and emailed SF 330's will not be accepted. Submittals received after this date and time will not be considered. Read the following information carefully. It is an Offeror's responsibility to deliver its SF 330 to the proper place at the proper time which includes allowing a reasonable amount of time for the delivery of the SF 330 (FAR 15.208(a)). Offerors shall ensure that SF 330s are mailed or sent by courier in a timely manner to be delivered to the NAVFAC Southwest facility no later than the date and time stated in this notice. An Offeror risks the late receipt and rejection of their SF 330 when it delays delivering its SF 330 until the last few minutes before the time set for receipt of SF 330s. Offerors intending to deliver the SF 330 in person to the facility at the address above are cautioned that this NAVFAC Southwest facility is located in downtown San Diego. It is recommended that the Offeror allows for delays in driving through downtown San Diego caused by traffic (both freeway and downtown), train/trolley crossing, parking at the pay lots/meters near the facility, and gaining access to a secure Government facility. No parking or offloading of SF 330s is available at the Government facility. SF 330s are to be delivered to the mailroom in Building 128 and reasonable time shall be allowed for the person in the mailroom to receive and time stamp the SF 330. The stamp time is determined from the NAVFAC Southwest facility mailroom time stamp and not any other time keeping equipment that the Offeror may own. Immediately upon SF 330 delivery the Offeror shall leave the Government facility. An Offeror that does not leave the premises may be requested to leave or be escorted off the premises. THIS IS NOT A REQUEST FOR PROPOSAL. NO SOLICITATION PACKAGE, TECHNICAL INFORMATION, OR BIDDER/PLAN HOLDER LIST WILL BE ISSUED. It is the offeror's responsibility to check the NAVFAC electronic solicitation website NECO (Navy Electronic Commerce Online) at: https://www.neco.navy.mil for any revisions to this announcement or other notices. Plan-holder list is available via the NECO website and an Interested Vendors List is available via the FedBizOpps website, www.fbo.gov, under this solicitation number. Address inquiries via email: betty.kimes@navy.mil or via telephone: 619-532-4261 *** END OF ANNOUNCEMENT ***

Nevro Corp Neurostimulation implant Supplies

Department of the Navy, Bureau of Medicine and Surgery | Published November 14, 2017  -  Deadline November 21, 2017
cpvs

NOTICE TO CONTRACTOR This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is N0025918Q0024. It is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The North American Industry Classification System (NAICS) Code for this acquisition is 339112. The size standard is 1000 (# of employees). (This solicitation is brand name only). It is the contractor's responsibility to be familiar with the applicable clauses and provisions. Salient characteristics: 1) Must be manufactured by Nevro Corp. Naval Medical Center San Diego (NMCSD) anesthesiology department request responses from qualified sources capable of providing the following items: Items required: CLIN 0001: IPG Kit (NIPG15000)Quantity: 1 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0002: Lead Kit 70cm (LEAD1058-70B)Quantity: 2 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0003: Patient Remote Kit (PTRC1000)Quantity: 1 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0004: Charger Kit (CHGR1000)Quantity: 1 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0005: Lead Anchor Kit (ACCL5300)Quantity: 1 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0006: IPG Template Kit (ACCK7100)Quantity: 1 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 CLIN 0007: Curved Insertion Needle (EPMD1040)Quantity: 2 Unit of Issue: Each Price: __________Date Material Required: 07 December 2017 Shipping: Please include shipping in the price of the units. Delivery/Acceptance location is 34800 Bob Wilson Drive San Diego, CA 92134. FBO Destination: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS)(a) In accordance with CNICMEMO dated May 5, 2017, individuals currently using an NCACS credential for Installation access are required to switch to a DBIDS no later than 14 August 2017. After 14 August 2017, the NCACS credential will no longer be valid for access to Navy Installations. (b) NCACS users may visit the local Navy Installation Visitor Control Center to obtain a DBIDS credential. To ensure uninterrupted Installation access, current NCACS credential holders are encouraged to shift to the DBIDS credential as soon as possible as Navy does not have the ability to extend this deadline. There are no fees incurred by the contractor, vendor, or supplier to obtain a DBIDS credential. (c) Individuals who apply for NCACS credentials during the period of 17 April through 31 May 2017 must also obtain DBIDS credentials. NCACS credentials issued after 17 April 2017 will no longer be accepted without an accompanying DBIDS credential for Navy Installation access. (d) DBIDS guidance for Vendors/Contractors to obtain a pass is accessible through the following website: https://www.cnic.navy.mil/om/dbids.html For more information or to enroll in the DBIDS Program call: 1.202.433.4784.For Naval Base San Diego Pass and Decal Office, call: 1.619.556.1653For Marine Corp Air Command Combat Center 29 Palms, Security Pass and Decal Office, call: 1.760.830.7700For Naval Air Station Lemoore, Security Pass and Decal, call: 1-559- 998-4786 (c) Vendors, contractors, suppliers and other service providers shall present their pass upon entry at ECP. This acquisition incorporates by reference the following FAR provisions and clauses: 52.212-4 -- Contract Terms and Conditions -- Commercial Items (Jan 2017)52.232-18 -- Availability of Funds (Apr 1984)52.232-40 - Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011)252.203-7005 Representation Relating to Compensation of Former DoD Officials (NOV 2011)252.204-7011 Alternative Line Item Structure (SEP 2011)252.204-7013 Limitations on the Use or Disclosure of Information by Litigation Support Offerors (May 2016)252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (MAY 2016)252.211-7003 Item Unique Identification and Valuation (Mar 2016)252.211-7008 Use of Government-Assigned Serial Numbers (Sep 2010)252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations (JUN 2015)252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013)252.225-7000 Buy American--Balance of Payments Program Certificate-Basic (NOV 2014)252.225-7001 Buy American and Balance of Payments Program (DEC 2016)252.225-7035 Buy American- Free Trade Agreements- Balance of Payments Program Certificate - Basic (Nov 2014)252.225-7036 Buy American - Free Trade Agreements - Blance of Payments Program - Basic252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (JUN 2012)252.232-7006 Wide Area WorkFlow Payment Instructions (MAY 2013)252.232-7010 Levies on Contract Payments (DEC 2006)252.244-7000 Subcontracts for Commercial Items (JUN 2013)252.246-7008 Sources of Electronic Parts (OCT 2016) (only for requirements that it applies to)252.247-7023 Transportation of Supplies by Sea-Basic (APR 2014) The following clauses incorporated by full text apply to the solicitation: The provision at FAR 52.212-1 applies to this acquisition.Addendum to FAR 52.212-1: FAR 52.212-1 is replaced in its entirety by this addendum:Instructions to Quoters-Commercial Items(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in the first paragraph of this combined synopsis/solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.( b ) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations must be submitted as specified in the solicitation. As a minimum, quotations must show-(1) The solicitation number;(2) The time specified in the solicitation for receipt of quotations;(3) The name, address, and telephone number of the quoter;(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;(5) Terms of any express warranty;(6) Price and any discount terms;(7) "Remit to" address, if different than mailing address;(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3( b ) for those representations and certifications that the quoter shall complete electronically);(9) Acknowledgment of Solicitation Amendments;(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and(11) Quotation must include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.( c ) Reserved. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during testing.(e) Multiple quotations. Quoters are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.(f) Late submissions.(1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due.(2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.(3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.(g) Issuance of purchase order. Quotations should contain the quoter's best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a purchase order to other than the quoter with the lowest priced quotation. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government's choice before issuing any purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government's choice and will not use the formal source selection procedures described in FAR part 15.(h) Multiple purchase orders. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation.(i) Availability of requirements documents cited in the solicitation.(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407Telephone (202) 619-8925 Facsimile (202) 619-8978.(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:(i) ASSIST (https://assist.dla.mil/online/start/).(ii) Quick Search (http://quicksearch.dla.mil/).(iii) ASSISTdocs.com (http://assistdocs.com).(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.(j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding $3,000, and quotations of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the quoter's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office.(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of a quotation, the quoter acknowledges the requirement that a prospective contractor shall be registered in the SAM database prior to purchase order issuance, during performance and through final payment of any contract resulting from this solicitation. If the quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to issue the purchase order to the next otherwise successful registered quoter. Quoters may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.(l) Requests for information. The contracting officer will not notify unsuccessful quoters that responded to this solicitation. Quoters may request information on purchase order(s) resulting from this solicitation from the contracting officer. 52.212-2 -- Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Capability, Delivery Schedule, and Price. FACTOR 1: Technical Capability; defined as the ability of the products to meet the salient characteristics needed.FACTOR 2: Delivery Schedule; defined as the lead time necessary to receive the product.FACTOR 3: Price; the government shall conduct a price evaluation of all technically acceptable offers with acceptable delivery schedules. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). ____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313). ____ (10) [Reserved] ____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (ii) Alternate I (NOV 2011) of 52.219-3. ____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).____ (ii) Alternate I (JAN 2011) of 52.219-4. ____ (13) [Reserved] ____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. ____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)). ____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Nov 2016) of 52.219-9. ____ (iii) Alternate II (Nov 2016) of 52.219-9. ____ (iv) Alternate III (Nov 2016) of 52.219-9. ____ (v) Alternate IV (Nov 2016) of 52.219-9. ____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). ____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)). ____ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). __X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). ____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). __X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __X__(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126). __X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __X__ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). ____ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). __X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793). ____ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212). ____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __X__ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). ____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). ____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. ____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016). ____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693). ____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693). ____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (OCT 2015) of 52.223-13. ____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-14. ____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-16. __X__ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693). ____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693). ____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). ____ (ii) Alternate I (JAN 2017) of 52.224-3. ____ (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). ____(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ____ (ii) Alternate I (May 2014) of 52.225-3. ____ (iii) Alternate II (May 2014) of 52.225-3. ____ (iv) Alternate III (May 2014) of 52.225-3. ____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __X__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). ____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). ____ (56) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __X__ (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332). ____ (58) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332). ____ (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332). ____ (60) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)). ____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). _____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67). _____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67). _____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658). _____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). _____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). _____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). (vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). _____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xvi)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (e)(1)(xvii): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)).(xix) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).(B) Alternate I (JAN 2017) of 52.224-3.(xx) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):http://farsite.hill.af.mil/vmfara.htm https://www.acquisition.gov/browsefar(End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): FAR Clauses: http://farsite.hill.af.mil/vmfara.htmDFAR Clauses: http://farsite.hill.af.mil/vmdfara.htm (End of clause) The Government will only consider firm fixed price (FFP) quotations. All questions regarding the RFQ, of a contractual nature or technical nature, must be submitted electronically by email to renier.s.valdez.civ@mail.mil no later than Monday, November 20, 2017, 0700 Pacific Time. Questions with the Government's responses will be posted as an attachment to the RFQ. Please be advised that the Government reserves the right to transmit those questions and answers of a common interest to all prospective Offerors. Electronic submission of Quotes: Quotations shall be submitted electronically by email to renier.s.valdez.civ@mail.mil. Quotations must be received by 0700 Pacific Time on Tuesday, November 21, 2017. Email submissions are limited to 2MB. The submitter should confirm receipt of email submissions. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the Offeror to meet all specifications and requirements. ******* End of Combined Synopsis/Solicitation ********

Candela Laser Systems Service Maintenance

Department of the Navy, Naval Supply Systems Command | Published October 16, 2017  -  Deadline October 19, 2017
cpvs

NOTICE TO CONTRACTOR This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is N0025918Q0005. It is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95 and Defense Federal Acquisition Regulation Supplement (DFARS) Publication Notices, DPN (20161222). The North American Industry Classification System (NAICS) Code for this acquisition is 811219. The size standard is $20.5 (millions of dollars). It is the contractor's responsibility to be familiar with the applicable clauses and provisions. Naval Medical Center San Diego (NMCSD) requests responses from qualified sources capable of meeting the Candela Laser System service maintenance requirement per the Performance Work Statement. Service Requirements:1) Ensure only FULLY QUALIFIED FIELD ENGINEERS and TECHNICIANS that are subject matter experts on original equipment manufacturer (OEM) Candela Laser systems shall perform any and all work under this contract2) provide suitable OEM recommended repair parts/equipment/tools required to ensure continued optimum performance and service3) perform service repair/preventive maintenance to industry standards as agreed upon as stated in the Performance Work Statement. Requirement:Period of Performance: 01 November, 2017 to 31 October, 2018CLIN 0001: Candela Alex - SN: 0669Quantity: 12 Unit of Issue: months CLIN 0002: Candela Alex Trivantage - SN: 0451Quantity: 12 Unit of Issue: monthsCLIN 0003: Candela Alex VBeam - SN: 1248Quantity: 12 Unit of Issue: months CLIN 0004: Candela Alex VPYAG - SN: 0283Quantity: 12 Unit of Issue: months CLIN 0005: Candela Alex GMax - SN: 0780Quantity: 12 Unit of Issue: months Option Year One: Period of Performance: 01 November, 2018 to 31 October, 2019CLIN 1001: Candela Alex - SN: 0669Quantity: 12 Unit of Issue: months CLIN 1002: Candela Alex Trivantage - SN: 0451Quantity: 12 Unit of Issue: monthsCLIN 1003: Candela Alex VBeam - SN: 1248Quantity: 12 Unit of Issue: months CLIN 1004: Candela Alex VPYAG - SN: 0283Quantity: 12 Unit of Issue: months CLIN 1005: Candela Alex GMax - SN: 0780Quantity: 12 Unit of Issue: monthsDelivery/Acceptance location is 34800 Bob Wilson Drive San Diego, CA 92134. FBO Destination: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS)(a) In accordance with CNICMEMO dated May 5, 2017, individuals currently using an NCACS credential for Installation access are required to switch to a DBIDS no later than 14 August 2017. After 14 August 2017, the NCACS credential will no longer be valid for access to Navy Installations. (b) NCACS users may visit the local Navy Installation Visitor Control Center to obtain a DBIDS credential. To ensure uninterrupted Installation access, current NCACS credential holders are encouraged to shift to the DBIDS credential as soon as possible as Navy does not have the ability to extend this deadline. There are no fees incurred by the contractor, vendor, or supplier to obtain a DBIDS credential. (c) Individuals who apply for NCACS credentials during the period of 17 April through 31 May 2017 must also obtain DBIDS credentials. NCACS credentials issued after 17 April 2017 will no longer be accepted without an accompanying DBIDS credential for Navy Installation access. (d) DBIDS guidance for Vendors/Contractors to obtain a pass is accessible through the following website: https://www.cnic.navy.mil/om/dbids.html For more information or to enroll in the DBIDS Program call: 1.202.433.4784.For Naval Base San Diego Pass and Decal Office, call: 1.619.556.1653 (c) Vendors, contractors, suppliers and other service providers shall present their pass upon entry at ECP. This acquisition incorporates by reference the following FAR provisions and clauses: 52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Jan 2017)Contractors are reminded to either include a completed copy of 52.212-3 and its ALT I with quotes, or alternatively, the provision can also be submitted at https://www.sam.gov. 52.212-4 Contract Terms and Conditions -- Commercial Items (JAN 2017)52.204-7 System for Award Management (OCT 2016)52.204-13 System for Award Management Maintenance (OCT 2016)52.204-16 Commercial and Government Entity Code Reporting (JUL 2016)52.204-18 Commercial and Government Entity Code Maintenance (JUL 2016)52.204-19 Incorporation by Reference of Representations and Certifications (DEC 2014)52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony conviction under any Federal Law (FEB 2016)52.217-9 Option to Extend the Term of the Contract (MAR 2000)52.225-25 Prohibition on Contacting with Entities Engaging in Certain Activities or Transactions Relating to Iran - Representation and Certification (OCT 2015)52.232-18 Availability of Funds (APR 1984)52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013)52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013)52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984) Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011)252.203-7002 Requirement to inform Employees of Whistleblower Rights (SEP 2013)252.203-7005 Representation Relating to Compensation of Former DoD Officials (NOV 2011)252.204-7003 Control of Government Personnel Work Product (APR 1992)252.204-7004 Alternate A, System for Award Management252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (OCT 2015)252.204-7011 Alternative Line Item Structure (SEP 2011)252.204-7013 Limitations on the Use or Disclosure of Information by Litigation Support Contractors (MAY 2016)252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (MAY 2016)252.211-7003Item Unique Identification and Valuation (MAR 2016)252.211-7008Use of Government-Assigned Serial Numbers (SEP 2010)252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations (JUN 2015)252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials (SEP 2014)252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013)252.225-7000 Buy American--Balance of Payments Program Certificate-Basic (NOV 2014)252.225-7001 Buy American and Balance of Payments Program (DEC 2016)252.225-7002 Qualifying Country Sources As Subcontractors (DEC 2016)252.225-7036 Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Dec 2016)252.225-7048 Export Controlled Items (JUN 2013)252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (JUN 2012)252.232-7006 Wide Area WorkFlow Payment Instructions (MAY 2013)252.232-7010 Levies on Contract Payments (DEC 2006)252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel (JUN 2013)252.244-7000 Subcontracts for Commercial Items (JUN 2013)252.246-7003 Notification of Potential Safety Issues (JUN 2013)252.246-7008 Sources of Electronic Parts (OCT 2016)252.247-7023 Transportation of Supplies by Sea-Basic (APR 2014) The following clauses incorporated by full text apply to the solicitation: The provision at FAR 52.212-1 applies to this acquisition.Addendum to FAR 52.212-1: FAR 52.212-1 is replaced in its entirety by this addendum:Instructions to Quoters-Commercial Items(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in the first paragraph of this combined synopsis/solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.( b ) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations must be submitted as specified in the solicitation. As a minimum, quotations must show-(1) The solicitation number;(2) The time specified in the solicitation for receipt of quotations;(3) The name, address, and telephone number of the quoter;(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;(5) Terms of any express warranty;(6) Price and any discount terms;(7) "Remit to" address, if different than mailing address;(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3( b ) for those representations and certifications that the quoter shall complete electronically);(9) Acknowledgment of Solicitation Amendments;(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and(11) Quotation must include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.( c ) Reserved. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during testing.(e) Multiple quotations. Quoters are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.(f) Late submissions.(1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due.(2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.(3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.(g) Issuance of purchase order. Quotations should contain the quoter's best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a purchase order to other than the quoter with the lowest priced quotation. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government's choice before issuing any purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government's choice and will not use the formal source selection procedures described in FAR part 15.(h) Multiple purchase orders. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation.(i) Availability of requirements documents cited in the solicitation.(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407Telephone (202) 619-8925 Facsimile (202) 619-8978.(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:(i) ASSIST (https://assist.dla.mil/online/start/).(ii) Quick Search (http://quicksearch.dla.mil/).(iii) ASSISTdocs.com (http://assistdocs.com).(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.(j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding $3,000, and quotations of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the quoter's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office.(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of a quotation, the quoter acknowledges the requirement that a prospective contractor shall be registered in the SAM database prior to purchase order issuance, during performance and through final payment of any contract resulting from this solicitation. If the quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to issue the purchase order to the next otherwise successful registered quoter. Quoters may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.(l) Requests for information. The contracting officer will not notify unsuccessful quoters that responded to this solicitation. Quoters may request information on purchase order(s) resulting from this solicitation from the contracting officer. 52.212-2 -- Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Capability, and Price. FACTOR 1: Technical Capability; defined as the ability of the offeror to demonstrate a technical understanding and meet performance standards of the service requirement set forth in the Performance Work Statement (PWS).FACTOR 2: Price; the government shall conduct a price evaluation of all technically acceptable offers that meet the performance standards per the Performance Work Statement. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). _X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). ____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313). ____ (10) [Reserved] ____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (ii) Alternate I (NOV 2011) of 52.219-3. ____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).____ (ii) Alternate I (JAN 2011) of 52.219-4. ____ (13) [Reserved] ____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. ____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)). ____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Nov 2016) of 52.219-9. ____ (iii) Alternate II (Nov 2016) of 52.219-9. ____ (iv) Alternate III (Nov 2016) of 52.219-9. ____ (v) Alternate IV (Nov 2016) of 52.219-9. ____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). ____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)). ____ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). __X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). ____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). __X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __X__(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126). __X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __X__ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). __X__ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). __X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793). __X__ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212). ____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __X__ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). ____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). ____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. ____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016). ____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693). ____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693). ____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (OCT 2015) of 52.223-13. ____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-14. ____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-16. __X__ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693). ____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693). ____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). ____ (ii) Alternate I (JAN 2017) of 52.224-3. ____ (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). ____(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ____ (ii) Alternate I (May 2014) of 52.225-3. ____ (iii) Alternate II (May 2014) of 52.225-3. ____ (iv) Alternate III (May 2014) of 52.225-3. ____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __X__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). ____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). ____ (56) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __X__ (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332). ____ (58) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332). ____ (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332). ____ (60) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)). ____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). _____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67). _____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67). _____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658). _____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). _____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). _____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). (vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). _____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xvi)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (e)(1)(xvii): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)).(xix) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).(B) Alternate I (JAN 2017) of 52.224-3.(xx) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):http://farsite.hill.af.mil/vmfara.htm https://www.acquisition.gov/browsefar(End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): FAR Clauses: http://farsite.hill.af.mil/vmfara.htmDFAR Clauses: http://farsite.hill.af.mil/vmdfara.htm (End of clause) The Government will only consider firm fixed price (FFP) quotations. Electronic submission of Quotes: Quotations shall be submitted electronically by email to gilberto.a.esteves.civ@mail.mil. Quotations must be received by 0700 Pacific Time on Thursday, October 19, 2017. Email submissions are limited to 2MB. The submitter should confirm receipt of email submissions. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the Offeror to meet all specifications and requirements. ******* End of Combined Synopsis/Solicitation ********  

De-Ionized Tank Rental/Exchange/Delivery/Water Softener Rental/ Tank Rental

Department of the Navy, Bureau of Medicine and Surgery | Published November 20, 2017  -  Deadline December 14, 2017
cpvs

NOTICE TO CONTRACTOR This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is N0025918Q0026. It is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The North American Industry Classification System (NAICS) Code for this acquisition is 221310. The size standard is 27.5 million. This solicitation is 100% set aside for small businesses. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. Naval Medical Center San Diego (NMCSD) requests responses from qualified sources capable of providing the following service below: Service Address:Bi-weekly at Naval Hospital Lemoore, 937 Franklin Avenue, Building 937, Lemoore, CA 93246Monthly at Naval Dental Clinic Lemoore, Building 926, Lemoore, CA 93246 See attached Performance Work Statement (PWS) for model numbers and serial numbers. Items required: CLIN 0001: Water Softener Tank Rental, Bldg 937 Main Hospital CSR.Quantity: 12 Unit of Issue: Month Price: __________Date Material Required: 29 December 2017 to 28 December 2018. CLIN 0002: Re-Charge/Tank Exchange, Bldg 937 Main Hospital CSR. Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2017 to 28 December 2018. CLIN 0003: Tank Rental, Bldg 926, Dental Quantity: 12 Unit of Issue: Month Price: __________ Date Material Required: 29 December 2017 to 28 December 2018. CLIN 0004: De-Ionized Tank Exchange, Bldg 296 Dental Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2017 to 28 December 2018. CLIN 1001: Water Softener Tank Rental, Bldg 937 Main Hospital CSR.Quantity: 12 Unit of Issue: Month Price: __________Date Material Required: 29 December 2018 to 28 December 2019. CLIN 1002: Re-Charge/Tank Exchange, Bldg 937 Main Hospital CSR.Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2018 to 28 December 2019. CLIN 1003: Tank Rental, Bldg 926, DentalQuantity: 12 Unit of Issue: Month Price: __________ Date Material Required: 29 December 2018 to 28 December 2019. CLIN 1004: De-Ionized Tank Exchange, Bldg 926, DentalQuantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2018 to 28 December 2019. CLIN 2001: Water Softener Tank Rental, Bldg 937 Main Hospital CSR.Quantity: 12 Unit of Issue: Month Price: __________Date Material Required: 29 December 2019 to 28 December 2020. CLIN 2002: Re-Charge/Tank Exchange, Bldg 937 Main Hospital CSR.Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2019 to 28 December 2020. CLIN 2003: Tank Rental, Bldg 926, DentalQuantity: 12 Unit of Issue: Month Price: __________ Date Material Required: 29 December 2019 to 28 December 2020. CLIN 2004: De-Ionized Tank Exchange, Bldg 926, DentalQuantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2019 to 28 December 2020. CLIN 3001: Water Softener Tank Rental, Bldg 937 Main Hospital CSR.Quantity: 12 Unit of Issue: Month Price: __________Date Material Required: 29 December 2020 to 28 December 2021. CLIN 3002: Re-Charge/Tank Exchange, Bldg 937 Main Hospital CSR.Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2020 to 28 December 2021. CLIN 3003: Tank Rental, Bldg 926, DentalQuantity: 12 Unit of Issue: Month Price: __________ Date Material Required: 29 December 2020 to 28 December 2021. CLIN 3004: De-Ionized Tank Exchange, Bldg 926, DentalQuantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2020 to 28 December 2021. CLIN 4001: Water Softener Tank Rental, Bldg 937 Main Hospital CSR.Quantity: 12 Unit of Issue: Month Price: __________Date Material Required: 29 December 2021 to 28 December 2022. CLIN 4002: Re-Charge/Tank Exchange, Bldg 937 Main Hospital CSR.Quantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2021 to 28 December 2022. CLIN 4003: Tank Rental, Bldg 926, DentalQuantity: 12 Unit of Issue: Month Price: __________ Date Material Required: 29 December 2021 to 28 December 2022. CLIN 4004: De-Ionized Tank Exchange, Bldg 926, DentalQuantity: 24 Unit of Issue: Each Price: __________ Date Material Required: 29 December 2021 to 28 December 2022. Installation/Delivery: Please include installation and delivery in the price of the units. Delivery/Acceptance location is Naval Hospital Lemoore, 937 Franklin Avenue, Building 937, Lemoore, CA 93246 and Naval Dental Clinic Lemoore, Building 926, Lemoore, CA 93246. FBO Destination: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS)(a) In accordance with CNICMEMO dated May 5, 2017, individuals currently using an NCACS credential for Installation access are required to switch to a DBIDS no later than 14 August 2017. After 14 August 2017, the NCACS credential will no longer be valid for access to Navy Installations. (b) NCACS users may visit the local Navy Installation Visitor Control Center to obtain a DBIDS credential. To ensure uninterrupted Installation access, current NCACS credential holders are encouraged to shift to the DBIDS credential as soon as possible as Navy does not have the ability to extend this deadline. There are no fees incurred by the contractor, vendor, or supplier to obtain a DBIDS credential. (c) Individuals who apply for NCACS credentials during the period of 17 April through 31 May 2017 must also obtain DBIDS credentials. NCACS credentials issued after 17 April 2017 will no longer be accepted without an accompanying DBIDS credential for Navy Installation access. (d) DBIDS guidance for Vendors/Contractors to obtain a pass is accessible through the following website: https://www.cnic.navy.mil/om/dbids.html For more information or to enroll in the DBIDS Program call: 1.202.433.4784.For Naval Base San Diego Pass and Decal Office, call: 1.619.556.1653For Marine Corp Air Command Combat Center 29 Palms, Security Pass and Decal Office, call: 1.760.830.7700For Naval Air Station Lemoore, Security Pass and Decal, call: 1-559- 998-4786 (c) Vendors, contractors, suppliers and other service providers shall present their pass upon entry at ECP. This acquisition incorporates by reference the following FAR provisions and clauses: 52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Jan 2017)Contractors are reminded to either include a completed copy of 52.212-3 and its ALT I with quotes, or alternatively, the provision can also be submitted at https://www.sam.gov. 52.212-4 -- Contract Terms and Conditions -- Commercial Items (Jan 2017)52.232-18 -- Availability of Funds (Apr 1984)52.232-40 - Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)52.217-5- Evaluation of Options (Jun 1990) Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011)252.203-7005 Representation Relating to Compensation of Former DoD Officials (NOV 2011)252.204-7011 Alternative Line Item Structure (SEP 2011)252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (MAY 2016)252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations (JUN 2015)252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013)252.225-7000 Buy American--Balance of Payments Program Certificate-Basic (NOV 2014)252.225-7001 Buy American and Balance of Payments Program (DEC 2016)252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (JUN 2012)252.232-7006 Wide Area WorkFlow Payment Instructions (MAY 2013)252.232-7010 Levies on Contract Payments (DEC 2006)252.244-7000 Subcontracts for Commercial Items (JUN 2013)252.247-7023 Transportation of Supplies by Sea-Basic (APR 2014) The following clauses incorporated by full text apply to the solicitation: The provision at FAR 52.212-1 applies to this acquisition.Addendum to FAR 52.212-1: FAR 52.212-1 is replaced in its entirety by this addendum:Instructions to Quoters-Commercial Items(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in the first paragraph of this combined synopsis/solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.( b ) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations must be submitted as specified in the solicitation. As a minimum, quotations must show-(1) The solicitation number;(2) The time specified in the solicitation for receipt of quotations;(3) The name, address, and telephone number of the quoter;(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;(5) Terms of any express warranty;(6) Price and any discount terms;(7) "Remit to" address, if different than mailing address;(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3( b ) for those representations and certifications that the quoter shall complete electronically);(9) Acknowledgment of Solicitation Amendments;(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and(11) Quotation must include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.( c ) Reserved. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during testing.(e) Multiple quotations. Quoters are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.(f) Late submissions.(1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due.(2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.(3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.(g) Issuance of purchase order. Quotations should contain the quoter's best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a purchase order to other than the quoter with the lowest priced quotation. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government's choice before issuing any purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government's choice and will not use the formal source selection procedures described in FAR part 15.(h) Multiple purchase orders. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation.(i) Availability of requirements documents cited in the solicitation.(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407Telephone (202) 619-8925 Facsimile (202) 619-8978.(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:(i) ASSIST (https://assist.dla.mil/online/start/).(ii) Quick Search (http://quicksearch.dla.mil/).(iii) ASSISTdocs.com (http://assistdocs.com).(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.(j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding $3,000, and quotations of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the quoter's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office.(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of a quotation, the quoter acknowledges the requirement that a prospective contractor shall be registered in the SAM database prior to purchase order issuance, during performance and through final payment of any contract resulting from this solicitation. If the quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to issue the purchase order to the next otherwise successful registered quoter. Quoters may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.(l) Requests for information. The contracting officer will not notify unsuccessful quoters that responded to this solicitation. Quoters may request information on purchase order(s) resulting from this solicitation from the contracting officer. 52.212-2 -- Evaluation -- Commercial Items (Oct 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Capability, Past Performance, and Price. FACTOR 1: Technical Capability; defined as the ability of the products to meet the salient characteristics needed.FACTOR 2: Past Performance; provide two (2) references with the point of contact name, telephone number, address, and contract number, for which you have provided the same or similar services within the last 3 years. Past performance will be evaluated based on references and information from authorized government past performance systems and resources.FACTOR 3: Price; the government shall conduct a price evaluation of all technically acceptable offers with acceptable delivery schedules. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). _X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). ____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313). ____ (10) [Reserved] ____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (ii) Alternate I (NOV 2011) of 52.219-3. ____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).____ (ii) Alternate I (JAN 2011) of 52.219-4. ____ (13) [Reserved] XX (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. ____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)). ____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Nov 2016) of 52.219-9. ____ (iii) Alternate II (Nov 2016) of 52.219-9. ____ (iv) Alternate III (Nov 2016) of 52.219-9. ____ (v) Alternate IV (Nov 2016) of 52.219-9. ____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). ____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)). ____ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). __X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). ____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). __X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __X__(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126). __X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __X__ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). ____ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). __X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793). ____ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212). ____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __X__ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). ____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). ____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. ____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016). ____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693). ____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693). ____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (OCT 2015) of 52.223-13. ____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-14. ____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-16. __X__ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693). ____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693). ____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). ____ (ii) Alternate I (JAN 2017) of 52.224-3. ____ (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). ____(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ____ (ii) Alternate I (May 2014) of 52.225-3. ____ (iii) Alternate II (May 2014) of 52.225-3. ____ (iv) Alternate III (May 2014) of 52.225-3. ____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __X__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). ____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). ____ (56) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __X__ (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332). ____ (58) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332). ____ (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332). ____ (60) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)). ____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). _____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67). _____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67). _____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658). _____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). _____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). _____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). (vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). _____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xvi)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (e)(1)(xvii): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)).(xix) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).(B) Alternate I (JAN 2017) of 52.224-3.(xx) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):http://farsite.hill.af.mil/vmfara.htm https://www.acquisition.gov/browsefar(End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): FAR Clauses: http://farsite.hill.af.mil/vmfara.htmDFAR Clauses: http://farsite.hill.af.mil/vmdfara.htm (End of clause) The Government will only consider firm fixed price (FFP) quotations. All questions regarding the RFQ, of a contractual nature or technical nature, must be submitted electronically by email to aratiya.k.lusk.civ@mail.mil no later than Monday, December 11, 2017 at 0600 AM PST. Questions with the Government's responses will be posted as an attachment to the RFQ. Please be advised that the Government reserves the right to transmit those questions and answers of a common interest to all prospective Offerors. Electronic submission of Quotes: Quotations shall be submitted electronically by email to aratiya.k.lusk.civ@mail.mil. Quotations must be received by 0600 Pacific Time on Thursday, December 14, 2017. Email submissions are limited to 2MB. The submitter should confirm receipt of email submissions. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the Offeror to meet all specifications and requirements. ******* End of Combined Synopsis/Solicitation ********