Public tenders for lcd-panels in United States

Find all Broadcasting tenders in the world.
Finding business opportunities has never been easier.

Results for broadcasting. Make a new search!

SOLE SOURCE SYNOPSIS LCD PANELS

Department of the Air Force, Air Force Materiel Command | Published June 25, 2009
cpvs

Link To Document

27" Display: 26.5" LCD Panel

Department of the Navy, Naval Air Systems Command | Published April 12, 2017  -  Deadline April 19, 2017
cpvs

U.S. Government ~ Tax Exempt Solicitation Information All quotes/responses shall be submitted via email to Maria Sproul at maria.sproul@navy.mil no later than 1:00PM Eastern Standard Time on 19 April 2017. Solicitation N0042117Q0095 is issued as an intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a sole source basis with Chasis Plans, LLC DBA: CP Systems for 27" Display: 26.5" LCD Panel P/N: CPR27-11848-09-00, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 13.106-1(b). Offeror's must be registered in the System for Award Management (SAM) Database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.sam.gov/vendor.cfm. This is a firm fixed-price procurement; therefore, the offeror's intial offer should represent the vendor's best quote in terms of price and technical acceptability. Your quote must contain enough technical information to evaluate your quote. Your quote will only be evaluated on the information you provide. ***Instructions to Offerors*** Offerors must complete the attached certification in Section K of this solicitation, 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. Please provide the completed certification with your offer. Please include the following information with your response:(1) FOB Destination prefered: (2) Shipping Cost : if applicable to St. Inigoes 20684-4013(3) Tax ID#(4) Dun & Bradstreet #(5) Cage Code:(6) Small Business - Yes ___ No ___(7) Estimated Delivery Date: (8) If available on a Pricelist please provide a copy.  

eTouch (Touchscreen LCD Panel PC)

United States Postal Service, Supplies and Services Purchasing | Published August 10, 2009  -  Deadline August 28, 2009
cpvs

The United States Postal Service (USPS) seeks a quality-conscious company capable of manufacturing LCD touch screen panel computers. The E-Touch is a generic state-of-the-art controller, for use within postal facilities to help fulfill wide-ranging application needs at low cost. Its robust construction incorporates embedded components to eliminate moving parts, keeping power consumption low, prevents overheating, withstands vibration, and endures harsh environments. The company which provides these items will have extensive successful experience manufacturing similar items. That company may be required to provide up to 2,000 computers at the rate of 125 per week beginning in the Spring 0f 2010. The supplier shall design, manufacture, package and deliver the E-touch based on the USPS Technical Design requirements. These requirements can be found in the statment of work (SOW). Only those suppliers who wish to be a prime contractor need to respond to this announcement. Each must also fill out the Prequalification Request and return it by the deadline.

70--LCD PANEL (SOLE SOURCE)

Department of the Navy, Naval Sea Systems Command | Published January 8, 2010  -  Deadline January 18, 2010
cpvs

This solicitation is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov/ and the Navy Electronic Commerce on Line (NECO) site located at https://www.neco.navy.mil/. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by NSWC Crane. This solicitation is being issued pursuant to the procedures at FAR 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-10-T-0082 http://www.crane.navy.mil/acquisition/synopcom.htm is hereby issued as an attachment hereto. All changes to the requirement that occur prior to the closing date will be posted to Crane web site, FedBizOpps and NECO. It is the responsibility of interested vendors to monitor the Crane web site, FedBizOpps and/or NECO for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Offers may be faxed to Eugene Colvin, FAX 812-854-3471 or e-mailed to eugene.colvin@navy.mil. All required information must be received on or before 4:30 PM local time. NOTE: THIS REQUIREMENT IS BEING ISSUED AS A SOLE SOURCE TO VARTECH SYSTEMS INC FOR PART NUMBER: VT084XAG3-RM-D-0-0-0-0-LR. THIS PART IS A DIRECT REPLACMENT PART USED IN SURVEILLANCE SYSTEMS CURRENTLY DEPLOYED OVERSEAS. THE SMALL BUSINESS SET-ASIDE IS HEREBY DISSOLVED IN ACCORDANCE WITH FAR 6.302-1.

eTouch (Touch Sceen LCD Panel PC)

United States Postal Service, Supplies and Services Purchasing | Published August 7, 2009  -  Deadline August 28, 2009
cpvs

The United States Postal Service (USPS) seeks a quality-conscious company capable of manufacturing LCD touch screen panel computers. The E-Touch is a generic state-of-the-art controller, for use within postal facilities to help fulfill wide-ranging application needs at low cost. Its robust construction incorporates embedded components to eliminate moving parts, keeping power consumption low, prevents overheating, withstands vibration, and endures harsh environments. The company which provides these items will have extensive successful experience manufacturing similar items. That company may be required to provide up to 2,000 computers at the rate of 125 per week beginning in the Spring 0f 2010. The supplier shall design, manufacture, package and deliver the E-touch based on the USPS Technical Design requirements. These requirements can be found in the statment of work (SOW). Only those suppliers who wish to be a prime contractor need to respond to this announcement. Each must also fill out the Prequalification Request and return it by the deadline.

75--Zenview Duo Pro Monitors

Department of the Navy, United States Marine Corps | Published August 17, 2010  -  Deadline August 23, 2010
cpvs

Zenview Duo 20 Pro Monitors Purchase ten (10) Zenview Duo 20 Pro-Ultimate Edition 20.1" super-premium S-IPS LCD panels 3200 by 1200 resolution (2x1600x1200 UXGA panels). 800:1 contrast ratio; 300 cd/m2

70--DIGITAL SIGNAGE SYSTEM

Department of the Army, Army Contracting Command | Published July 17, 2010  -  Deadline August 10, 2010
cpvs

The Letterkenny Army Depot (LEAD) Directorate of Information Management (DOIM) seeks to attain the ability to display multiple information types, obtained from multiple video sources, simultaneously in multiple panes of LCD panels. These LCD Panels shall be located in strategic assembly areas of selected buildings. The accompanying software shall support instant alert notification to employees of changes in the depot security footprint and environmental emergencies. Twelve (12) units shall be installed throughout the industrial area in Building 350, and one (1) unit shall be mounted over the main access door Front Garage area, Building 370. The successful contractor shall supply and install applicable software and hardware and provide training as per requirements. The contractor shall have proven experience and expertise in: - Public Area Display Systems (PADS) software. - Installation of the hardware associated with this project in industrial areas. - Integration of the PADS software and video hardware. - Training of Technical Personnel on software features and capabilities. A site visit will be scheduled in the upcoming solicitation to ascertain the scope of the work involved, as the successful Contractor shall be responsible for the development and configuration of the initial display layout. All details and specifications will be provided in the solicitation document. Interested vendors should contact Claudette Lyons, Contract Specialist, either by email at claudette.lyons@us.army.mil or by fax at 609-267-9834. A solicitation will be issued on or about 27 July 2010. The estimated closing date will be on or about 10 August 2010 at 1:00 pm.

58--Installation of Visix Meeting Minders

Department of the Navy, Naval Supply Systems Command | Published September 29, 2012  -  Deadline October 5, 2012
cpvs

The NAVSUP Fleet Logistics Center Norfolk Philadelphia Office intends to acquire, on a sole source basis, on-site installation of four (4) Visix Meeting Minder 15” LCD Panels with built-in PC’s, plus upgrade of the existing Visix server from standard to professional level at the Human Resources Service Center – Northeast in Philadelphia, PA. These commercial services will be solicited in accordance with the information in FAR Part 13. The NAICS Code is 334310 and the Small Business Standard is 750 employees. The period of performance is 28 September 2012 through 28 November 2012. The proposed firm fixed price contract action is for services which the Government intends to solicit and negotiate with only one source. The sole source contractor is Advanced Audio Visual, Inc. of West Chester, PA. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all information received within five days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this requirement based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. The point of contact is Dennis Bilger at 215-697-9626, or e-mail dennis.bilger@navy.mil.

99--Custom Glare Shield Display

Department of Transportation, Federal Aviation Administration (FAA) | Published July 21, 2009  -  Deadline July 29, 2009
cpvs

In accordance with the Federal Aviation Administration Acquisition Management System (FAA AMS) paragraph 3.2.2.4, the purpose of this announcement is to inform industry of the FAA's intent to contract with a selected firm using single source procedures. The FAA has a requirement to purchase four (4) Custom Glare Shield Displays with Touch overlay. The wide Liquid Crystal Display (LCD) is designed to fit in a standard aircraft glare shield. The LCD display is being installed in an A-320 cockpit where all displays and controls are rendered in graphics so as to be completely reconfigurable. The size constraints of the Glare section are highly demanding and require a display 29" wide by 4" high. To provide pilot input controls, a custom touch overlay is also required. A.D.T.C Systems of Aptos, CA was selected for this procurement because they are the only company that has the technical knowledge and experience to resize LCD panels of the size required by the FAA, and they are the only company that has the software, protected by commercial license, that can drive the displays. A competitive solicitation will not be available for this procurement. Any/all questions or concerns should be directed to William Zeiger, via email at william.zeiger@faa.gov by no later than 10:00 AM EST, 7/29/2009.

SOLE SOURCE: Perceptive Pixel Touch Monitors

Department of the Air Force, Air Force Materiel Command | Published September 1, 2010  -  Deadline September 7, 2010
cpvs

Contracting Office Address Department of the Air Force, Air Force Materiel Command, ASC - Aeronautical Systems Center, 2275 D Street, Wright-Patterson AFB, OH, 45433-7228 Description Air Force Materiel Command, Aeronautical Systems Center, Wright Patterson AFB OH, intends to negotiate a sole source firm fixed price contract for a 94" Multi-Touch Rear Projection Display, Two 55" Multi-touch LCD Displays, Software Developer Kit, and associated system components, prepared in accordance with the format in Subpart 15.2. The contract will be awarded to Perceptive Pixel. Market research was previously conducted and it has been determined this is a sole source requirement IAW FAR 6.302-1. This is not a request for competitive proposals and no solicitation is available. All interested sources must respond in writing with clear and convincing evidence to support their ability to provide the specific supplies within five (5) days of this publication. A determination by the Government not to compete this action based on responses received is solely within the discretion of the Government. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-09. Line items are as follows: CLIN 0001 One (1) Perceptive Pixel 94" Multi-touch Rear Projection Display sensor, server and software CLIN 0002 Two (2) Perceptive Pixel 55" Multi-touch LCD panels, sensors, servers, and software CLIN 0003 Ten (10) seat license of the Perceptive Pixel software development kit A Brand Name Justification and Approval (J&A) Document, is Attachment 1. Primary Place of Performance: Wright-Patterson AFB, OH Authority: 10 U.S.C. 2304(c)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. Howard E. Marks Jr., Chief, ASC/AE, Wright-Patterson AFB, OH, 45433, has been appointed as Ombudsman to hear concerns from offerors, or potential offerors, during the proposal development. The purpose of the Ombudsman is to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. Existence of the Ombudsman does not diminish the authority of the program director or the contracting officer. Accordingly, the Ombudsman does not participate in the preparation of solicitations, the evaluation of proposals or the source selection process and, therefore, for routine matters on individual solicitations, please contact the buyer at the telephone number listed herein. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. Howard E. Marks Jr., Chief, Acquisition Center of Excellence, Aeronautical Systems Center, 1755 11th St, Bldg 570, Room 101, Wright-Patterson AFB, OH 45433-7404, howard.marks@wpafb.af.mil, Voice Number: 937-255-8642 (DSN 785-8642) Fax Number: 937-656-7193 (DSN 986-7193) Point of Contact Michael W. Piller, Contract Negotiator, Phone 937-656-7469 , Fax 937-656-7535, Email Michael.piller@wpafb.af.mil Place of Performance Address: Wright-Patterson AFB, OH Postal Code: 45433 Country: United States

LCD DISPLAY WALL SYSTEM

Department of the Air Force, Air Force Materiel Command | Published August 30, 2010  -  Deadline September 10, 2010
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested and a written solicitation (paper copy) will not be issued. Further, offerors are responsible for monitoring this site for the release of amendments (if any) or other information pertaining to this solicitation. Solicitation FA8751-10-R-0038 is issued as a Request for Proposal (RFP). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-44 and Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 20100820. See http://farsite.hill.af.mil/ for the full text of all provisions and clauses incorporated by reference herein. This procurement is being issued as a total small business set-aside under NAICS code 334310 and small business size standard of 750 employees. SITE VISIT is highly encouraged and will be conducted on 10 AM (ET) WED 08 SEP 2010. Interested parties must contact the Contract Specialist no later than 3 PM (ET) FRI 03 SEP 2010 to arrange site access. The Contractor shall provide the following items on a Firm Fixed Price (FFP) basis. Offerors must specify the warranty term for hardware and include shipping FOB Destination and installation in the total price. * Offers of products which are equal or superior to the brand name items specified below will be considered and evaluated (see FAR 52.211-6). Item 1: PLANAR CLARITY MATRIX LCD DISPLAY WALL ASSEMBLY Qty: 1 P/N: MX46-L X 27 #1 / OR EQUAL SPECIFICATIONS - Qty 27 each LCDs, each with 46 inch screen (landscape orientation) and the following approximate characteristics: - Full viewing angle: 178 degrees - Ultra narrow bezel (7.3mm tiled image-to-image gap) - Resolution: 1366 x 768 pixels - Brightness: 700 nits - Backlight life (1/2 brightness): 50,000 hrs - Response Time: 8 ms - Acoustic noise: fanless operation - Display module position sensing: auto-sensing integrated - Weight: 48 lbs - LCD mounts for landscape orientation; 1 per panel; 6-axis adjustment cams for precise panel alignment - Qty 9 each external Quad Controllers (to accommodate an array of three 3x3 virtual displays), each controller having the following characteristics: - 1U rack mountable - Drives up to 4 LCD panels - Inputs: 4 single-link DVI; 1 dual-link DVI - Image scaling: video sources can be scaled up to a 32x32 tile display - Integrated mullion compensation - Frame lock: 49-61 Hz - Maximum distance from LCD: 125 ft - Qty 9 each External Power Supply Modules, each with the following characteristics: - 2U rack mountable - Powers up to 4 LCD panels - Maximum distance from LCD: 200 ft - Qty 27 each 100 ft cable sets to connect LCDS, power supply modules, and quad controllers - Trim set for curved wall - Installation The expected completion date is 30 days ARO. Products must be delivered FOB Destination. The place of delivery, acceptance and FOB destination point is F4HBL1/Transportation Officer, Depot 2, 148 Electronic Pkwy, Rome NY, 13441-4516. The provision at 52.212-1, Instructions to Offerors - Commercial Items (JUN 2008), applies to this acquisition. Addenda to the following paragraphs of 52.212-1 are: (b) Written proposals are due at or before 3 PM (ET) FRI 10 SEP 2010. Submit to: AFRL/RIKO, Attn: Charlene Booth, 26 Electronic Parkway, Rome NY 13441-4514 or by facsimile to: 315-330-2555 or by email to charlene.booth@rl.af.mil. Offerors are encouraged to submit their proposals using the SF1449 Solicitation/Contract/Order for Commercial Items. (b)(4) Submit a technical description of the items being offered. (b)(10) Submit past performance information for contracts completed successfully within the last 3 years that are similar in magnitude and scope to the work described in this notice. To be considered RELEVANT, the contract must have included the provision and installation of a LCD Display Wall system similar in size to that described herein. Include current reference name, telephone number, and email address, as well as a brief description of the contract effort. (b)(11) Include a statement verifying that your firm is capable of conforming to the requirements of DFARS clause 252.211-7003, Item Identification and Valuation, for items with a unit price greater than or equal to $5,000. (k) Central Contractor Registration. Offerors must be registered in the CCR database to receive a contract award. If the offeror does not become registered in the CCR database within three (3) days after receiving notification from the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror. The provision at 52.212-2, Evaluation -- Commercial Items (JAN 1999) applies. In addition to the information in paragraph (a), the following factors shall be used to evaluate offers: PRICE, PAST PERFORMANCE, and TECHNICAL CAPABILITY. All factors are of approximately equal importance. The representations and certifications found in the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items (AUG 2009) and ALT I (APR 2002) must be completed electronically on the Online Representations and Certifications Application (ORCA) website at http://orca.bpn.gov. Therefore, offerors are required to complete only paragraph (b) of this provision and submit it with their proposal. In addition, offerors shall complete and submit the representations and certifications at DFARS 252.212-7000, Offeror Representations and Certifications--Commercial Items (JUN 2005). For your convenience, paragraph (b) of 52.212-3 and 252.212-7000 are attached to this solicitation. The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items (JUN 2010), applies to this acquisition. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items (JUL 2010) applies to this acquisition. The following additional FAR clauses cited in the clause are applicable to this acquisition: 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006) with Alternate I (Oct 1995) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) 52.219-6, Notice of Total Small Business Aside (Jun 2003) Alternate I (Oct 1995) 52.219-8, Utilization of Small Business Concerns (May 2004) 52.219-14, Limitations on Subcontracting (Dec 1996) 52.219-28, Post Award Small Business Program Representation (Apr 2009) 52.222-3, Convict Labor (Jun 2003) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jul 2010) 52.222-21, Prohibition of Segregated Facilities (Feb 1999) 52.222-26, Equal Opportunity (Mar 2007) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) The clause at 252.212-7001, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders Applicable to Defense Acquisitions of Commercial Items (JUN 2010) applies to this acquisition. The following additional FAR and DFARS clauses cited in the clause are applicable to this acquisition: 52.203-3, Gratuities (Apr 1984) 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Jan 2009) 252.225-7012, Preference for Certain Domestic Commodities (Jun 2010) 252.227-7015, Technical Data - Commercial Items (Nov 1995) 252.227-7037, Validation of Restrictive Markings on Technical Data (Sep 1999) 252.232-7003, Electronic Submission of Payment Requests (Mar 2008) 252.243-7002, Requests for Equitable Adjustment (Mar 1998) 252.247-7023, Transportation of Supplies by Sea (May 2002) 252.247-7024, Notification of Transportation of Supplies by Sea (Mar 2000) The following additional FAR and DFARS provisions and clauses also apply: 52.211-6, Brand Name or Equal (AUG 1999) 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country (JAN 2009) 252.211-7003, Item Identification and Valuation (AUG 2008) 252.232-7010, Levies on Contract Payments (DEC 2006) 5352.201-9101, OMBUDSMAN (APR 2010) is hereby incorporated into this solicitation. The Ombudsman for this acquisition is Karen Sue Hunter, Building 15, Room 225, 1864 4th Street, Wright-Patterson AFB OH 45433-7130 FAX: 937-255-5036 COM: 937-904-4407. Note that the clause at 252.232-7003 is included in this solicitation. DoD requires all payment requests (with a few exceptions) to be submitted and processed electronically. All vendors/contractors must familiarize themselves with this clause and DFAR 232.7003 for specific procedures. The DoD preferred electronic form for transmission is Wide Area Workflow - Receipt and Acceptance (see website - https://wawf.eb.mil). Wide Area Workflow Training may be accessed online at http://www.wawftraining.com. Please confirm in your proposal that your company is able to submit electronic invoices as set forth in the clause. The Defense Priorities and Allocations System (DPAS) rating DO-A7 has been assigned to this effort. All responsible organizations may submit a proposal which shall be considered.

62 -- LCD Assembly

Department of the Navy, Space and Naval Warfare Systems Command | Published September 5, 2012  -  Deadline September 12, 2012
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This is a request for quotation (RFQ) issued under SSC Pacific/Simplified Acquisitions/N66001-12-T-7171. The government is soliciting quotes for the purchase of commercial supplies. This solicitation is SET-ASIDE FOR SMALL BUSINESSES. The applicable NAICS code is 335110. The size standard is 1000 employees. Basis for award: The government anticipates awarding a firm-fixed price purchase order. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-59 (05/10/12) and Defense Federal Acquisition Regulation Supplement (DFARS), April 20, 2012. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. The provision at 52.212-1, Instructions to Offerors--Commercial Items (FEB 2012), and 52.212-4, Contract Terms and Conditions-- Commercial Items (FEB 2012), incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications Commercial Items and DFARS 252.212-7000, Offeror Representations and CertificationsCommercial Items are in the E-Commerce website at https://ecommerce.sscno.nmci.navy.mil. Current Version - Brand Name 52.211-6, FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items applies to acquisition and includes 52.222-50, Combating Trafficking in Persons (22 U.S.C. 7104(g)), 52.233-3, Protest After Award (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (Pub. L. 108-77, 108-78), 52.222-3, Convict Labor (E.O. 11755), 52.222-19, Child LaborCooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities, 52.222-26, Equal Opportunity (E.O. 11246), 52.222-36, Affirmative Action for Workers with Disabilities (29 U.S.C. 793), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds TransferCentral Contractor Registration (31 U.S.C. 3332). FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation) also applies to this acquisition. Current Version - DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items and DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items (Deviation) apply to this acquisition and includes 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207), 252.225-7001, Buy American Act and Balance of Payments Program (41 U.S.C. 10a-10d, E.O. 10582), 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (10 U.S.C. 2227). 252.211-7003, Unique Item Identification (JUN 2011). 252.204-7001, Commercial and Government Entity (CAGE) Code Reporting (AUG 1999), 52.204-6, Data Universal Numbering System (DUNS) (APR 2008), 52.214-3, Amendments to Invitation for Bids (DEC 1989), 52.214-4, False Statement in Bids (APR 1984), 52.214-5, Submission of Bids (MAR 1997), 52.214-6, Explanation to Prospective Bidders (APR 1984), 52.214-7, Late Submission, Mods, & Withdrawls of Bids (NOV 1999). SPAWAR Systems Center Pacific (SSC-Pacific) is seeking competitive quotations for the following item(s): ITEM 0001, QUOTE BRAND NAME OR EQUAL LCD ASSEMBLY P/N 997-3736 REPLACEMENT LCD PANELS AND ROTATORS FOR CLARITY LION DISPLAYS, MODEL WN-6750-UXL. NOTE: If your quote is based on equal products, include specification sheets for technical review. QTY: 12 EACH. UNIT PRICE: _________________ EXTENDED PRICE: ______________ TOTAL PRICE: _________________________ All responding vendors must complete and submit with their quotes DFARS Clause 252.209.7998, The clause is listed below. DFARS Clause 252.209-7998, REPRESENTATION REGARDING CONVICTION OF A FELONY CRIMINAL VIOLATION UNDER ANY FEDERAL OR STATE LAW (DEVIATION 2012-O0007) (DATE 2012) (a) In accordance with section 514 of Division H of the Consolidated Appropriations Act, 2012, none of the funds made available by that Act may be used to enter into a contract wih any corporation that was convicted of a felony criminal violation under any Federal or State law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) The Offeror represents that it is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal or State law within the preceding 24 months. This RFQ closes on SEPTEMBER 12, 2012 at 08:00 a.m. Pacific Daylight Time (PDT). Please submit your materials in response to (RFQ) N66001-12-T-7171 to SSC Pacific/Simplified Acquisitions/N66001-12-T-7171. Quotes must be uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific, Simplified Acquisition, N66001-12-T-7171. All responding vendors must be registered to the SAM.GOV (Central Contractor Registration (CCR) and to the Online Representations and Certifications Applications (ORCA) merged with SAM.GOV) prior to award of contract. Information to register can be found at http://www.bpn.gov or https://www.sam.gov/portal/public/SAM. The point of contact for this solicitation is Cynthia Riego at cynthia.riego@navy.mil. Please include RFQ N66001-12-T-7171 on all inquiries.

70--TANDBERG 6000 MXP

Department of the Army, Army Contracting Agency, South Region | Published September 29, 2009  -  Deadline September 30, 2009
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W91247-09-T-0540 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 334119 with a small business size standard of 1,000.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-30 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT BRAGG, NC 28310 The USA ACA Ft. Bragg requires the following items, Exact Match Only, to the following: LI 001, TANDBERG 6000 MXP Wall-mount Integration bundle. MFG Part No. 10-9685-0112. Includes TANDBERG 6000 MXP CODEC with NPP (Natural Presenter Package H.239), MultiSite software, Bandwidth Software, and PresenterHD camera; dual 42" LG HD LCD panels with speakers and wall-mount installation hardware; drywall reinforcement kit; plenum-rated cabling bundle for and audio; three omni-directional programmable system mics; threeceiling microphones; PrecisionHD camera mounts (two: shelf mount and shaft mount bpth included); custom AV wallplate, mudrings, plenum integration cabling, architectural extension cables, and system integration technical drawings. Price includes cost for special handling, consolidation and double shipment., 1, EA; For this solicitation, USA ACA Ft. Bragg intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Ft. Bragg is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under about WAWF. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL

70--VTC Suites and Projector

Department of the Army, Army Contracting Command, MICC | Published September 13, 2011  -  Deadline September 16, 2011
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is 0010048350 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-53. The associated North American Industrial Classification System (NAICS) code for this procurement is 334112 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-09-16 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Bliss, TX 79916 The U.S. Army ACC MICC Fort Bliss requires the following items, Meet or Exceed, to the following: LI 001, 1.0 Objective: The objective of this program is to get the audio visual technical support required to troubleshoot, isolate, and remediate the problem in order to sustain SVTC services. 2.0 WORK TO BE PERFORMED: ?2.1 provide Audio/Video and Video teleconference technical support at the following locations at Fort Bliss, TX?2.2 - Bldg. 111 General?s Conference Room?2.3 - Bldg. 111 1st Floor Conference Room?2.4 - Bldg. 122 Conference Room?2.5 - Bldg. 738 Conference Room 3.0 Some of the equipment includes but not limited to: AMX Programming, Media Presentation Matrix Switcher, video heads, optical blocks, plasma screens, LCD panels, CRT?s, camera pick-up tubes or chips, projection tubes, lamps, batteries, slide trays, HD Integrator Package & Recertification, 4 microphone / line inputs and 6 stereo inputs, 8.4? Wireless IR Modero Touch panel, ISDN Network Termination Device, ISDN Multiplexor, and other Miscellaneous Hardware. 4.0 Technical Approach / Subtasks: Contractor shall provide diagnosis, equipment, and labor at the SVTC site. Contractor will provide the US Government Agency a detailed accounting of diagnostics, replacement, and testing work that has been completed. This accountability will include parts to be replaced for each system. 5.0 Once the work has been completed, US Government Agency will be invoiced at the quoted rates. If additional materials are required, increases to the quoted costs will be coordinated with the US Government prior to accomplishing work or parts replacements. Once the Government Point of Contact has approved the additional charges, they can be added to the invoice along with the authorized materials? cost. 6.0 Once accounts have been settled between the US Government and the Contractor, the repaired end items will be returned to the Point of Contact in their original shipping containers to the following address: Provided upon award.Contact information will be given after award., 1, EA; LI 002, Option year One- same as requirement in Line Item 1, 1, EA; LI 003, Option year Two - same as requirement in Line Item 1, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC MICC Fort Bliss intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC MICC Fort Bliss is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 15 days preferred after receipt of order (ARO). The offeror must provide within its offer the number of days - 15 days preferred- required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, FAR 52.217-8 Option to Extend Services, FAR 52.217-9 Option to Extend the Term of the Contract, FAR 52.219-6 Notice of Total Small Business Set-Aside, 52.219-8- Utilization of Small Business Concerns, 52.219-28-Post-Award Small Business Program Rerepresentation. paragraph (a) and the following clauses in paragraph (b): 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13, 52.232-33, 52.233-33. DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports also applies. DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders applicable to Defense Acquisition of Commercial Items Applies: 252.225-7001, Buy American Act and Balance Payments Program; 252.247-7023, Transportation of Supplies by Sea Alt III. DFARS 252.232-7010, Levies on Contract Payments also applies. Local Clause 5152.233-4000, AMC-Level Protest Program. 5152.209-4000 DOD LEVEL I ANTITERRORISM (AT) STANDARDS. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

58--EOC Video Monitoring System

Department of the Army, FedBid | Published August 11, 2016  -  Deadline August 30, 2016
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W9124C-16-T-2095 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-08-30 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Jackson, SC 29207 The MICC Fort Jackson requires the following items, Brand Name or Equal, to the following: LI 001: Procure and install Planar Clarity Matrix 55" 2x4 Video Wall Bundle; includes 8 LCD Panels, Power Supply Modules, Quad Controllers, and Easy Axis Mounts, LX55HDSL., 1, Each; LI 002: Procure and install Planar Redundant Power Supply Option., 8, EA; LI 003: Procure and install Planar Trim Kit for 2x4 Video Wall., 1, EA; LI 004: Procure and install 1 Planar Cable Bundle: Power Supply Cables and Video/Data/Control Assembly Cables., 1, EA; LI 005: Procure and install Creston Digital Media 16x16 Matrix Switch with Redundant Power Supply: (10) DM inputs (6) HDMI inputs, (8) HDMI outputs, (8) DM outputs., 1, EA; LI 006: Procure and install Creston Digital Media Transmitter., 10, EA; LI 007: Procure and install Creston Digital Media Scaling Receiver., 8, EA; LI 008: Procure and install Creston 16-Port PoDM Power Supply., 1, EA; LI 009: Procure and install Creston Digital Media 8G Cable, Plenum, 500ft spool, 4, EA; LI 010: Procure and install Creston Digital Media Connectors, 20-pack., 3, EA; LI 011: Procure and install Creston 16-Port Managed PoE Switch., 1, EA; LI 012: Procure and install Creston 10.1 Touch Screen and tabletop kit, 5, EA; LI 013: Procure and install Creston 2 channel commercial power amplifier, 1, EA; LI 014: Procure and install Creston 6.5? in-ceiling speaker., 8, EA; LI 015: NEC 50? Commercial LED display., 8, EA; LI 016: Procure and install chief tilt wall mount., 8, EA; LI 017: Procure and install Middle Atlantic equipment rack: to include shelves, vents, blanks, lacing bars, and power supplies., 1, EA; LI 018: Procure and install Lot cables, interconnects, terminations: HDMI, shielded Cat6 Plenum Cable, Speaker Wire, VGA, Mic Line, and Miscellaneous Supply., 1, EA; LI 019: AVG removal of equipment to not be used in system upgrade, disposal as needed by client of equipment., 1, EA; LI 020: AVG Installation and integration: system wiring, install, testing, and commissioning., 1, EA; LI 021: AVG Engineering and design: project management, system drawing, wiring schematics, training manuals., 1, EA; LI 022: AVG system programing: Creston control panel programing, programing /configuration of audio DSP conferencing system., 1, EA; LI 023: AVG 1-year service and support plan, 1, EA; LI 024: Freight and shipping cost., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Jackson intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Jackson is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) The anticipated award will be a Firm Fixed Price (FFP) contract. The contract award will be based upon the quote which is the lowest priced technically acceptable (LPTA) that is the most advantageous to the USG. This is not an IFB.

65--Cardiosave Intra-Aortic Balloon Pumps (IABP)

Department of Veterans Affairs, Long Beach VANLO | Published December 14, 2015  -  Deadline December 17, 2015
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the solicitation in its entirety; quotes are being requested and a written solicitation will not be issued. Basis for Award under FAR 13.106-2: This procurement shall be conducted under FAR Parts 12 and 13. Award to this solicitation shall be based on the offeror's ability to provide those specific supplies and services (FAR 52.211-6, Brand Name or Equal) stated in the solicitation. Award shall be made to the offeror who can provide an offer that meets the specifications/salient characteristics of the items listed within this solicitation while providing the lowest price. Solicitation number VA262-16-Q-0216 shall be issued as a "Brand Name or Equal" request for quotation (RFQ). All incorporated provisions and clauses shall be in effect throughout this solicitation and award. The North American Industrial Classification System (NAICS) code for this requirement is 334510. Small business size standard is 500 employees. This requirement is unrestricted and only qualified offerors who are capable of providing the requirements under the categories described in this solicitation may submit bids. All firms must be registered with and verified by the following websites: https://sam.gov to be eligible for award. The Department of Veterans Affairs San Diego Healthcare System, San Diego, California has a requirement for the Cardiosave Intra-Aortic Balloon Pumps (IABP). Listed below is a description of the items being requested in this solicitation. Line Item Stock Number Item Description Quantity Price 1 D998-00-0800-53 CARDIOSAVE Hybrid and one (1) year warranty Product includes CARDIOSAVE Blood Pressure Transducer Adapter Cable CARDIOSAVE ECG Trunk Cable - 5 lead - AAMI CARDIOSAVE ESIS Lead Wires 50" - 5 Lead (Op Rm) - AAMI Helium - 3 refillable tanks, 104L External Signal Cable CARDIOSAVE Hybrid Operators Manual - disc CARDIOSAVE Non-locking Male Luer Plug Helium Cylinder Washer Thermal Recorder Chart Paper Starter Pack Fiber Optic Cleaning Swabs (qty 5) Fiber Optic Connector Cleaner CARDIOSAVE Plastic Weather Cover (for off cart configuration) 2 EA 2 D000-21-0800 Datascope manufactured IABP Contingent Discount 2 EA 3 USSV.CDSVPOSE.W CRDSVE - MCare SILVR Pln - POSEW 2 EA 4 D998-00-0803 Cardiosave Trainer 1 EA 5 FREIGHT Estimated Freight and Insurance Charges 1 EA 6 24/7 REMOTE SUPPORT Available 24/7 Remote Support via Win-IABP 1 EA 7 EDUCATION Initial Clinical Education on IABP 1 EA 8 CLINICAL SUPPORT 24 Hour Clinical Support 1 EA Total Line Item Stock Number "Equal" Item Description Quantity Price 1 2 3 4 5 6 7 8 Total The salient characteristics of the items above are listed below. Salient Characteristics: 1. Device must utilize fiber-optic IABP and catheter system that automatically calibrates in the patient after insertion and automatically recalibrates in vivo every 2 hours or sooner, should the patient or environmental conditions change. 2. Device must utilize the Sensation Plus 50cc IAB to be utilized with the CardioSave IABP. The Sensation Plus is the only 50cc IAB that can be used on patients 5'4" and up. This IAB provides increased hemodynamic support. 3. Must have lithium ion batteries which offer potentially unlimited run-time with spare batteries. 4. Must have state-of the- art LCD panels which are used for both the upper waveform display and lower touchscreen control. This allows for larger patient display parameters, improved help screen navigation and customizable control screens. The backlit screen allows visibility in varying lighting conditions with no alternate light source. 5. Must have enhanced pneumatics which helps optimize diastolic augmentation. Faster pneumatic speed allows the balloon to stay inflated longer during diastole. 6. Must have enhanced pacer detection. 7. Must be able to provide loaner pumps as needed and must guarantee that a pump will be delivered within 4 hours. 8. Must provide a clinical support line for staff to call when there are questions with the pump when a patient is receiving treatment. Most of these calls are emergent and the staff needs quick response to their questions. This support must be available 24 hours a day, 7 days a week. 9. Must provide field service capability where representatives are deployed locally to the facility. Services must be performed on-site by certified technicians, including scheduled preventative maintenance. 10. Balloon pumps must be helium pressure based. 11. When a patient codes, the device must automatically go into pressure mode for uninterrupted treatment of the patient. The Government intends to award a firm-fixed price award. Responses to the solicitation shall be due on Thursday, December 17, 2015 at 9:00AM PST. Offerers are advised to review and monitor the website to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to Johnny Kim, Contracting Officer at johnny.kim@va.gov. Telephone inquiries will not be honored. Clauses Incorporated by Reference: FAR 52.211-6, Brand Name or Equal FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items (Include completed copy) FAR 52.212-4, Contract Terms and Conditions -- Commercial Items FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items VAAR 852.237-70, Contractor Responsibilities VAAR 852.270-1, Representatives of Contracting Officers 52.212-1 -- Instructions to Offerors -- Commercial Items. (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show -- (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2) (i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-- GSA Federal Supply Service Specifications Section Suite 8100 470 L'Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925) Facsimile (202 619-8978). (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites-- (i) ASSIST (http://assist.daps.dla.mil). (ii) Quick Search (http://assist.daps.dla.mil/quicksearch/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard ( http://assist.daps.dla.mil/wizard ); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4 Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697/2197, Facsimile (215) 697-1462. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to offers exceeding $3,000, and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the offeror's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the Internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office. (k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov. (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer. (2) The overall evaluated cost or price and technical rating of the successful and debriefed offeror and past performance information on the debriefed offeror. (3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (4) A summary of rationale for award; (5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror. (6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. (End of Provision) ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS All responses/or questions must be in writing via e-mail. (no telephone inquiries will be accepted). Offers may be emailed to johnny.kim@va.gov no later than 9:00AM Pacific Standard time on Thursday, December 17, 2015. Offerors shall fill in the prices being offered in the schedule listed within this solicitation. If submitting a price for an "Equal" item, pricing and item information shall be filled in in the corresponding schedule. (End of Provision) ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS --COMMERCIAL ITEMS - SUB-PART 13.5 TEST PROGRAM This procurement is being conducted under the Subpart 13.5 test program where simplified acquisition procedures apply and the conduct of the procurement will be in accordance with Parts 12, 13 or 15 of the FAR or some combination thereof. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The combined synopsis/ solicitation number is VA262-16-Q-0216. This solicitation is issued as a Request for Quote (RFQ). This solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC). This requirement will be procured under NAICS Code 334510, 500 employees. The VISN 22 Network Contracting Office, Long Beach, CA, (hereafter referred to as the NCO) will solicit and award this order using Federal Acquisition Regulations (FAR) Part 13 and acquisition of Commercial Items in FAR Part 12. (End of Provision) 52.212-2 -- Evaluation -- Commercial Items. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factor shall be used to evaluate offers: Basis of Award: Award shall be made to the offeror who can provide an offer that meets the specifications/salient characteristics of the items listed within this solicitation while providing the lowest price. (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision)

59--Audio Visual Equipment

Department of the Army, Army Contracting Agency, South Region | Published September 17, 2009  -  Deadline September 22, 2009
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W45CMJ92112001A and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 443112 with a small business size standard of $9.00M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-22 17:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Hood , TX 76544 The USA ACA Fort Hood requires the following items, Meet or Exceed, to the following: LI 001, LCD Projector,Mitsubishi 6000 Lumen, LCD Projector Model: XL6600 U/LU; Specifications: General Device Type: LCD projector Built-in Devices: Speaker Width: 17.1 in Depth: 17.4 in Height: 6.9 in Weight: 19.8 lbs Projector / Panel Image Brightness: 5500 ANSI lumens Image Contrast Ratio: 600:1 Image Size: 5 ft - 25 ft Projection Distance: 7.5 ft - 40 ft Resolution: 1024 x 768 Native Aspect Ratio: 4:3 Color Support: 24-bit (16.7 million colors) Lamp Type: 270 Watt Lamp Life Cycle: 2000 hour(s) Features: Picture in picture, ColorView Natural Color Matrix, 3D CineView Projector Lens System Lens Aperture: F/1.8-2.1 Video Input Analog video format: PAL-M, PAL-N, PAL, NTSC 4.43, PAL 60, NTSC, SECAM Analog video signal: Composite video, RGB, S-Video, Component video Digital Television Video Formats: 525p, 1080i, 720p Video Output Analog video signal: RGB Video Input DeviceType: None Audio Input Type: None Audio Output Type Speakers: Integrated Sound Output mode: Mono Sound Output Power per Channel: 5 Watt Speaker(s): 1 Mixed channel Input Device Type: Remote control - External - Wireless Expansion / Connectivity Interfaces: 1 x Composite video input - BNC, 1 x Audio line-in - RCA X 2, 2 x Serial RS-232C - 8 pin mini-DIN ( Management ), 1 x Component video / RGB input - BNC X 5, 1 x Audio line-out - Mini-phone 3.5 mm, 1 x Audio line-in - Mini-phone 3.5 mm, 1 x S-video input - 4 pin mini-DIN, 1 x Remote control input, 1 x VGA output - 15 pin HD D-Sub (HD-15), 1 x S-video input - BNC X 2, 1 x USB - 4 pin USB Type B, 1 x Composite video input - RCA, 1 x VGA input - 15 pin HD D-Sub (HD-15), 1 x Remote control output, 1, EA; LI 002, Projector Mount ; Model: XL5950CM; Specifications: Ceiling projector mount for the Mitsubishi 6000 Lumen, LCD Projector, 1, EA; LI 003, Altinex Video Distribution Amplifier; Model: DA 1706SV; Specifications: 1-In 6-Out distribution amplifier designed to allow the simultaneous connection of a single C-Video source, 1, EA; LI 004, Kramer Dual Scaler Seamless Switcher; Model: VP-727; Specifications: INPUTS: 8 sets of universal BNC connectors: R/Pr, G/Y/CV, B/Pb/C, Hs/Cs, and Vs, each programmable for use as CV, YC, RGB, YCbCr, YPbPr, RGBS or RGBHV. PREVIEW OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors. PROGRAM OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors., 1, EA; LI 005, Kramer Dual Scaler Seamless Switcher Remote; Model: VP-727T; Specifications: All the front panel controls of the Seamless Switcher are replicated. Convenient Switching Control: T-Bar or Take button with selectable transition speed control. Menu Button: Switcher Control via on-screen display on Preview output. Wipe Direction Control: Via front panel buttons. Control Multiple Units: Up to 4 Seamless Switchers can be controlled from one Switcher Remote., 1, EA; LI 006, Pelco, Video Camera; Model: Esprit Series ES3012; Video Camera Optics Specifications: Signal Format: NTSC or PAL Scanning System: 2:1 Interlace 2:1 Interlace Image Sensor Effective Pixels: 1/4-inch EXview HAD NTSC: 768 (H) X 494 (V) PAL: 752 (H) X 582 (V) Horizontal Resolution: NTSC>540 TV Lines PAL>470 TV Lines Lens: f/1.4 (focal length, 3.4~119 mm) Zoom: 35X optical, 12X digital Zoom Speed (optical range): 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds Horizontal: 55.8 at 3.4 mm wide zoom Angle of view: 1.7 at 119 mm telephoto zoom Focus: Automatic with manual override Maximum Sensitivity @35IRE NTSC/EIA 0.55 lux at 1/60 sec (color) 0.063 lux at 1/4 sec (color) 0.00018 lux at 1/2 sec (B-W) PAL/CCIR 0.50 lux at 1/50 sec (color) 0.062 lux at 1/3 sec (color) 0.00014 lux at 1/1.5 sec (B-W) Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync White Balance: Automatic with manual override Shutter Speed: NTSC Automatic (electronic iris)/Manual 1/2 ~1/30,000 PAL Automatic (electronic iris)/Manual 1/1.5 ~1/30,000 Iris Control: Automatic Iris Control with manual override., 2, EA; LI 007, Pelco, PTZ Controller; Model: KBD4000; Specifications: A full-function, desktop keyboard controller that can be used in a variety of applications. A barrel-type joystick provides precise pan and tilt control of fixed speed and variable speed receivers. Twisting the joystick clockwise or counter clockwise zooms the lens in or out,, 1, EA; LI 008, Pelco, Keyboard Kit, Model: KBDKIT, 1, EA; LI 009, Marshall , 4 Screen Rack Mount Video Monitor; Model: Marshall V-R44P; Specifications (Quad): Rack mountable unit that offers four 4" high-resolution active matrix LCD panels. Each of the four 480 x 234 pixel screens has its own set of controls for color, tint, contrast, and brightness. Each panel has its own input with active loop-through feature, a 3 color tally system, and auto-recognition of NTSC or PAL formats. This unit is only 2U high, can be tilted up to 100 degrees while rack mounted, and is the smallest video monitoring system of its kind. All V-R Series models are constructed of steel and aluminum, and include a power supply. Display Viewing Area: 4: (3.23 x 2.43), 2, EA; LI 010, Delvcam, 2 Screen Rank Mount Video Monitor; Model: DELV-2LCD-7XLS; Specifications (Dual): DISPLAY: 7 active matrix TFT-LCD (16:9) BACK LIGHT: Internal CCFT DOT MATRIX: 0.129 (H) x 0.447 (V) RESOLUTION: 1440 Horizontal x 234 Vertical BRIGHTNESS: 300cd/m2 (NIT) CONTRAST: 150:1 VIEWING ANGLE: U: 15 / D: 35, R / L: 50 PIXEL CONFIGURATION: Striped VIDEO SIGNAL: 1Vpp into 75Ω Terminated & Looping Input STANDARD: NTSC-M POWER REQUIREMENTS: 110-220VoltsAC50/60 cycAuto switching, 14watts OPERATING TEMPERATURE: 32-122 Degrees F (0-50C) REMOTE CONTROL: Handheld Infrared DIMENSIONS: 19"W x 4.5"D x 7"H (4RU) WEIGHT: 16.0 Lbs, 1, EA; LI 011, Microboards Technology 10 Disc DVD/CD Duplicator; Model: LS-DVD PRM PRO10; Specifications: Burn Speed: DVD 18X, CD 52X (Selectable recording Speed) Supported Formats: DVD-Video, DVD-ROM, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD-DL,CD-DA (Red Book), CD-ROM Modes 1 & 2, XA Forms 1 & 2, ISO 9660, Photo CD, CD-Extra, Mixed Mode, Video CD, Hybrid CD, HFS Connectivity: Standalone; PC-connect upgrade available, 1, EA; LI 012, Vbaluns Video Baluns, Model: VBP-FMALE-RJ45, Specifications: 12V & video over CAT5 w/RJ45, 2, EA; LI 013, Blander Tongue Lab, Blonder Tongue RF Modulator; Model: BAVM-860SAW; Specifications: Input: Video: 1V p-p @ 75 ohms Audio: 1V RMS @ 47K ohms Video Performance: Differential Gain: 4% Differential Phase 80 dB below rated power, 20 Hz to 1 kHz. Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz. Input Stage: Input is electronically balanced and employs precision 1% resistors. Input Impedance (nominal): 20 k ohms, balanced; 10 k ohms, unbalanced. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz. AC Line Current: XTi 2000: 6.9A. At Idle: Draws no more than 90 watts. Operating Temperature: 0 C to 40 C at 95% relative humidity (non-condensing)., 1, EA; LI 023, SoundBridge Acoustic Lab, Main Loudspeaker Series 4000, Model: SB4112HT; Specifications: Cabinetry The cabinet design shall use13 ply 3/4 high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. The loudspeaker shall have integral suspension points for permanent overhead rigging. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver, 4, EA; LI 024, Soundbridge Acoustic Labs, monitor loudspeaker Series 4000, Model: SB4112W; Specifications: Cabinetry The cabinet design shall use13 ply 3/4 high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver. The titanium high frequency driver shall be coupled with a durable cast horn for proper dispersion. The cabinet shall be tuned by means of a vented port set at the optimum frequency, 4, EA; LI 025, Ellipsoidal Stage Lights, Lighting Fixture, Model: ELFLEV; Specifications: General The instrument shall be a ellipsoidal spotlight or approved equal. Physical The spotlights are constructed of rugged, die cast aluminum, free of burrs and pits, finished in black, high temperature epoxy paint. The spotlight shall provide, but not be limited to: Rugged die-cast aluminum construction Ten interior baffles to eliminate beam scattering and spill light. Thermally insulated, precision focus knob. A sealed reflector housing that shall prevent all light leaks. 17 heat-sink fins cast into the reflector housing for temperature control. Integral cable clamp for power leads. A brass self-retaining screw to retain the lamp socket Sturdy gel frame holders with two accessory slots and a top mounted, quick release gel frame retainer. Rugged steel yoke with 300+ rotation of fixture within yoke Positive locking, hand operated yoke clutch. Unit shall be nominally 11long by 10 wide. Unit shall not weigh more than 8.5 pounds (without c-clamp). The spotlight shall be UL and cUL listed and so labeled. Electrical The unit shall have an operating range of 115-240V, 50/60Hz. The unit shall be capable of using a maximum of 750W HPL lamp. The three conductor, 36 leads shall be rated for high temperature and encased in a glass fiber outer sleeve. The unit shall be capable of utilizing ETC Dimmer Doubling technology. Lamp The instrument shall use only one lamp type, the HPL lamp. Fixtures that require the purchasing of multiple lamp types to achieve different field angles shall not be acceptable. The lamp shall: Be an HPL lamp consisting of a compact tungsten filament, contained in a krypton-filled quartz envelope Mount axially within the reflector and shall be pre-focused within the reflector. Have an integral die cast aluminum heat sink that reduces seal temperature and ensures proper lamp alignment. Use an ATP 220 nickel gold plated socket. Lenses Lens sets shall consist of two patented wave lenses. One clear and one stippled. Lenses shall be heat resistant, borosilicate glass. Beam orientation of 25-45 (spot to flood) shall be possible through rotation of exterior rotation knob connected to a rotatable collar housed in the front of the unit. Fixtures which require user to reposition the lamp socket to change the beam angle shall not be acceptable. Optical The optical train shall combine a compact filament lamp with modified parabolic and multifaceted reflector. Reflector finish shall be an Enhanced Aluminum deposition. Reflector shall be cast into a heat sink assembly. Reflector efficiency shall be a minimum of 93%. Reflectors of pressed aluminum s -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.

58--Electronic System Upgrade - Fort Hood Chapels

Department of the Army, Army Contracting Agency, South Region | Published September 19, 2008  -  Deadline September 24, 2008
cpvs

Bids are being solicited under solicitation number W45CMJ82531800. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 91315. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is unrestricted and only qualified sellers may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-09-24 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Hood, TX 76544 The USA ACA Fort Hood requires the following items, Brand Name or Equal, to the following: LI 001, (Brand Name or Equal) Mitsubishi 5500 Lumen LCD Projector LCD Projector Specifications:GeneralDevice Type: LCD projector Built-in Devices: Speaker Width: 17.1 in Depth: 17.4 in Height: 6.9 in Weight: 19.8 lbsProjector / PanelImage Brightness: 5500 ANSI lumens Image Contrast Ratio: 600:1 Image Size: 5 ft - 25 ft Projection Distance: 7.5 ft - 40 ft Resolution: 1024 x 768 Native Aspect Ratio: 4:3 Color Support: 24-bit (16.7 million colors) Lamp Type: 270 Watt Lamp Life Cycle: 2000 hour(s) Features: Picture in picture, ColorView Natural Color Matrix, 3D CineViewProjector Lens SystemLens Aperture: F/1.8-2.1 Video Input Analog video format: PAL-M, PAL-N, PAL, NTSC 4.43, PAL 60, NTSC, SECAM Analog video signal: Composite video, RGB, S-Video, Component video Digital Television Video Formats: 525p, 1080i, 720pVideo OutputAnalog video signal: RGB Video Input DeviceType: NoneAudio InputType: NoneAudio OutputType Speakers: Integrated Sound Output mode: Mono Sound Output Power per Channel: 5 Watt Speaker(s): 1 Mixed channelInput DeviceType: Remote control - External - WirelessExpansion / ConnectivityInterfaces: 1 x Composite video input - BNC, 1 x Audio line-in - RCA X 2, 2 x Serial RS-232C - 8 pin mini-DIN ( Management ), 1 x Component video / RGB input - BNC X 5, 1 x Audio line-out - Mini-phone 3.5 mm, 1 x Audio line-in - Mini-phone 3.5 mm, 1 x S-video input - 4 pin mini-DIN, 1 x Remote control input, 1 x VGA output - 15 pin HD D-Sub (HD-15), 1 x S-video input - BNC X 2, 1 x USB - 4 pin USB Type B, 1 x Composite video input - RCA, 1 x VGA input - 15 pin HD D-Sub (HD-15), 1 x Remote control outputMiscellaneousIncluded Accessories: Included Projector Accessories Lens cover Cables Included: 1 x Serial cable, 1 x A/V cable, 1 x VGA cable Miscellaneous compliant standards: UL 60950, CSA 22.2 No. 950, FCC Class B certifiedPowerPower Device Power supply Voltage Required AC 120/230 V Power Consumption Operational 380 WattEnvironmental ParametersMin Operating Temperature: 41 Degrees F Max Operating Temperature: 104 Degrees F Humidity Range Operating: 30 - 90% Sound Emission: 30db, 4, EA; LI 002, (Brand Name or Equal) Projector Mount, 4, EA; LI 003, (Brand Name or Equal) Altinex Video Distribution Amplifier, 3, EA; LI 004, (Brand Name or Equal) Kramer Dual Scaler Seamless Switcher, 3, EA; LI 005, (Brand Name or Equal) Pelco Video Camera Video Camera Optics Specifications: Signal Format: NTSC or PAL Scanning System: 2:1 Interlace 2:1 Interlace Image Sensor Effective Pixels: 1/4-inch EXview HAD NTSC: 768 (H) X 494 (V) PAL: 752 (H) X 582 (V) Horizontal Resolution: NTSC>540 TV Lines PAL>470 TV Lines Lens: f/1.4 (focal length, 3.4~119 mm) Zoom: 35X optical, 12X digital Zoom Speed (optical range): 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds Horizontal: 55.8 at 3.4 mm wide zoom Angle of view: 1.7 at 119 mm telephoto zoom Focus: Automatic with manual override Maximum Sensitivity @35IRE NTSC/EIA 0.55 lux at 1/60 sec (color) 0.063 lux at 1/4 sec (color) 0.00018 lux at 1/2 sec (B-W) PAL/CCIR 0.50 lux at 1/50 sec (color) 0.062 lux at 1/3 sec (color) 0.00014 lux at 1/1.5 sec (B-W) Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync White Balance: Automatic with manual override Shutter Speed: NTSC Automatic (electronic iris)/Manual 1/2 ~1/30,000 PAL Automatic (electronic iris)/Manual 1/1.5 ~1/30,000 Iris Control: Automatic Iris Control with manual override Gain Control: Automatic/OFF Video Output: 1 Vp-p, 75 ohms Video Signal to Noise: >50 dB Wide Dynamic Range: 128X Electronic Image Stabilization: Integrated Image Enhancement: Integrated Video Camera Dome Drive Features: 256 Presets 0.1 Preset Accuracy RJ-45 Data Port for Software Update and Setup On-Screen Compass, Tilt, and Zoom Display 400/sec Pan Preset Speed and 200/sec Tilt Preset Speed Rotating Discreet Liner with Sealed Fixed Bubble Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom Variable Scan Speed: Programmable Between 1-40/sec Pan Motion Allows 0.1-150/sec Pan Speed Programmable Limit Stops for Auto/Random/Frame Scan Modes Auto-sensing Protocol (Coaxitron, RS-422 P and D); Accepts Competitive Control Protocol with Optional Translator Card Digital Position and Zoom Control and Feedback through D Protocol Built-in Menu System for Setup of Programmable Functions Auto Flip‖ Rotates Dome 180 at Bottom of Tilt Travel Programmable Zoom Speeds, 6, EA; LI 006, (Brand Name or Equal) Pelco PTZ Controller, 3, EA; LI 007, (Brand Name or Equal) Pelco Keyboard Kit, 3, EA; LI 008, (Brand Name or Equal) Screen Rack Mount - Marshall (4) Screen Rack Mount Video Monitor Rack mountable unit that offers four 4" high-resolution active matrix LCD panels. Each of the four 480 x 234 pixel screens has its own set of controls for color, tint, contrast, and brightness. Each panel has its own input with active loop-through feature, a 3 color tally system, and auto-recognition of NTSC or PAL formats. This unit is only 2U high, can be tilted up to 100 degrees while rack mounted, and is the smallest video monitoring system of its kind. All V-R Series models are constructed of steel and aluminum, and include a power supply. Display Viewing Area: 4‖: (3.23‖ x 2.43‖) Resolution Pixels: 480H x 234V Dot Pitch: 0.17mm x0.264mm Brightness: (in cd/m2): 300 System: NTSC/PAL Auto Recognition Inputs Per Panel (total): 1 (4) Composite Dimensions: 19.125‖W x 3.43‖H x 1.9‖D Weight: 3.5 lbs Power Consumption: 12 VDC, 5.0 Amps, 6, EA; LI 009, (Brand Name or Equal) Screen Rank Mount - Delcam (2) Screen Rank Mount Video Monitor DISPLAY: 7‖ active matrix TFT-LCD (16:9) BACK LIGHT: Internal CCFT DOT MATRIX: 0.129 (H) x 0.447 (V) RESOLUTION: 1440 Horizontal x 234 Vertical BRIGHTNESS: 300cd/m2 (NIT) CONTRAST: 150:1 VIEWING ANGLE: U: 15 / D: 35, R / L: 50 PIXEL CONFIGURATION: Striped VIDEO SIGNAL: 1Vpp into 75Ω Terminated & Looping Input STANDARD: NTSC-M POWER REQUIREMENTS: 110-220VoltsAC50/60 cycAuto switching, 14watts OPERATING TEMPERATURE: 32-122 Degrees F (0-50C) REMOTE CONTROL: Handheld Infrared DIMENSIONS: 19"W x 4.5"D x 7"H (4RU) WEIGHT: 16.0 Lbs. Features: Picture Mode Select: 16:9 Wide Cinema Mode 4:3 Normal Mode 4:3 Wide Mode 4:3 Full Mode Looping BNC inputs High Resolution Performance NTSC-M Standard CATV, UHF, VHF TV ATSC Receiver (Monitor A only) Allows 180 of tilt while mounted in rack Low power consumption and heat dissipation for mobile applications Fits in standard 19" rack, 4 spaces high On screen color, tint, brightness and contrast controls Wireless I/R remote control, 3, EA; LI 010, (Brand Name or Equal) Vbaluns Video Baluns, 6, EA; LI 011, (Brand Name or Equal) Blonder Tongue RF Modulator RF Modulator Specifications: Input: Video: 1V p-p @ 75 ohms Audio: 1V RMS @ 47K ohms Video Performance: Differential Gain: 4% Differential Phase panel stereo outputs are unbalanced (RCA) and digital outputs are optical. Digital outputs can pass Dolby Digital and DTS surround streams for later decoding. The DVD player performs multiple playback modes, including slow motion and frame by frame playback, power on play, aspect adjustment, selectable scan mode, tray-lock, FVPP, and Progressive Scan. When stopped the DVD player output is black. The DVD player provides extensive bi-directional RS-232 serial control. I/R remote control included. It is equipped with a screen saver function and defeatable On-Screen Icons. The unit is also able to play "finalized" +R/+RW (video format discs only). The unit is HDCP compliant, 5, EA; LI 014, (Brand Name or Equal) Tascam DVD/CD Recorder -DVD/CD Player/ Recorder Specifications:This device is a three-in-one video recorder that combines (3) all-digital formats of MiniDV, 250GB HDD, and DVD in a compact package complete with A-D encoding as well as various editing and dubbing capabilities. DV native format recording to HDD can be performed, allowing the unit to make exact copies of DV tapes. The model is equipped with an RS-232C interface to further enhance system applications. Thanks to these advantages, this unit is ideal for professionals as it makes media duplication and professional archiving of existing analog footage easier than ever.Easy to use and connect. No complicated wiring Use it as a standalone editing/dubbing/viewing production system --or-- Plug it in to your existing system Multi-format DVD (recording & playback of DVD-R, DVD-RW, and DVD-RAM as well as playback of +R or +RW.) Simple non-linear 'play-list' editing built-in DV Native Format Recording to HDD Up to 18 hours of HDD recording in DV modeCan be used as extended length DV recorder from input via IEEE-1394! Create finished DVD programs without a computer! Compatible with most non-linear editing systems IEEE-1394 dubbing to/from MiniDV tape Program storage on HDD High quality DVD creation and duplication 250 GB HDD storage for extended recording time (up to 473 hours in FR480 mode) and high speed DVD duplication (up to 8X) Full auto repeat discs can be made BNC Video output connector DVCAM playback capability RS-232C interface for custom installations, 3, EA; LI 015, (Brand Name or Equal) Shure System Processor -Digital System Processor Specification: System Processor The primary interface for this device is a Windows-based software program that mimics the functional block diagrams used in sound system design. The processing blocks shall be applied in any order, to any input or output. Processing blocks shall be able to be copied and pasted to duplicate processors across multiple channels. The device shall allow real-time design changes, so processing blocks can be added, removed or changed during system tuning. The security options shall allow complete lock of the system to prevent undesired tampering or to restrict user access to certain parts of the system. Control input pins shall allow connection of potentiometers, contact closures, for remote control of preset changes, volume, and muting. Specifications and Features: Automatic Feedback Reduction 5-, 10-, and 16-filter single-channel and stereo modules Frequency resolution: 0.1 Hz Filter width: 1/10 to 1/70 per octave EQ and Shelving Cut/Shelf Equalizer High/low shelf filters: 6 and 12 dB/octave slopes, 18dB boost/cut High/low cut filters: 6, 12, 18, and 24 dB/octave slopes High/low cut filter types: Butterworth, Bessel and Linkwitz-Riley Graphic Equalizers 10- and 30-band modules Combining and non-combining Parametric Equalizers 3, 5, 7, and 10 filter modules, plus cut/shelf filters Bandwidth: 1/70 to 4 octaves Filter depths: up to 18dB Crossover Independently adjustable slopes Butterworth, Bessel & Linkwitz-Riley up to 24 dB/octave Dynamics Processing Automatic Gain Control Maximum boost: 12dBCompressor/Limiter Selectable soft knee or fixed hard knee Single-channel or stereo Peak Stop (look-ahead) limiter Ducker Gate and Downward Expander Delay 10 seconds of available delay memory 20 microsecond resolution Matrix Mixer Routes any input to any output Independently adjustable cross point gain, muting, and polarity Frequency Response 20 Hz to 20 kHz +/ 1dB Dynamic Range 110 dB minimum, A-weighted, 20 Hz to 20 kHz Digital-to-Analog, Analog-to-Digital Conversion 24 bit Impedance Input: 10k ohms Output 120k ohms Input Clipping Level +24 dBu minimum Output Clipping Level +24 dBu +12 dBu with 12 dB pad engaged +6 dBu with 18 dB pad engaged Total Harmonic Distortion < 0.05%, +4 dBu, 20 Hz to 20 kHz Propagation Delay < 1.5 ms. Processing blocks add no latency Polarity Input to output: non-inverting (inverting optional) Operating Voltage 100-240 VAC, 50/60 Hz (auto-switching), 1 A, maximum Maximum Power Drain45 W Temperature Range Operating: 7 degrees to 49 degrees C (19 degrees to 120 degrees F) Storage: 29 degrees to 74 degrees C (20 degrees to 165 degrees F) Dimensions: 482.6 mm x 247.7 mm x 44.4 mm (19 in. x 9.75 in. x 1.75 in.) Weight 2.83 kg (6.25 lbs, 3, EA; LI 016, (Brand Name or Equal) Shure Digital Remote Switch, 3, EA; LI 017, (Brand Name or Equal) Shure Digital Audio Processor -Digital Audio System Processor Specification: The programmable graphic equalizer shall consist of four independent channels of 24 bit digital graphic equalization. Each channel shall consist of 28 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 31Hz to 16kHz. The range of equalization per band shall be 15dB in 0.5dB increments. The equalizer shall have a gain of unity with all bands set at zero, and shall have a maximum in/out level of +20dBu. Frequency response shall be .25dB 20Hz to20kHz. Dynamic Range shall be greater than 110dB (20-20KHz, unweighted) and SMPTE intermodulation distortion or THD shall be less than 0.01% at 1KHz, +20dBu. Input impedance shall be 18K ohms balanced. Output impedance shall be 200 ohms. Inputs and outputs shall be balanced type on XLR and 1/4" phone jacks. Individual filters shall be of a constant Q reciprocal filter design. Boost and cut characteristics shall be fully symmetrical. The equalizer shall also include on each channel a 24dB per octave high pass filter adjustable from 20Hz to 10.6KHz, a 24dB per octave low pass filter adjustable from 33Hz to 20KHz, a full function, pre/post switchable compressor/limiter with adjustable threshold, ratio, attack and release controls, and a time delay capable of a maximum of 1.364 seconds adjustable in 20us increments. A 240 X 64 fluorescent backlit LCD display will show all parameter, function and utility information. LED indicators shall show signal present and mute conditions. Channel gain shall be adjustable over a range of +6dB to - infinity in 0.5db increments. Control of the unit shall be from the front panel, via the optional 4.24RD remote control, via RS-232 serial port using the System Software, or via MIDI. The equalizer shall weigh 14 lbs net and mount in a standard 19" rack using 2 spaces (3.5" high). The power requirement shall be 90-125VAC (180-250VAC, switchable), 50-60Hz, 30W. operation., 3, EA; LI 018, (Brand Name or Equal) Crown Power Amplifiers, 8, EA; LI 019, (Brand Name or Equal) Speakers - Soundbridge Main Loudspeaker. - Main Loudspeaker Specifications: Cabinetry The cabinet design shall use13 ply 3/4‖ high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. The loudspeaker shall have integral suspension points for permanent overhead rigging. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver. The titanium high frequency driver shall be coupled with a durable cast horn for proper dispersion. The cabinet shall be tuned by means of a vented port set at the optimum frequency. High Frequency Protection The loudspeaker feature a high frequency device protection system with LED indicators mounted on the baffle. A green LED which lights when there is signal present and a red LED which lights when the OPC (overload protection circuitry) senses an overload condition in the HF driver. The OPC disconnects the HF driver temporarily, and the red LED flashes, indicating an overload. When the HF driver cools, or the power is decreased, the OPC automatically resets itself and signal is restored to the HF driver. Frequency Response: 60hz-18Khz Power Handling: 450w (cont.) Sensitivity (1 watt/meter): 98dB Nominal Dispersion: 70v x110h Impedance: 8 Ohms Transducer Components Low Frequency: 12‖ woofer High Frequency: 1‖ titanium Audio Input Connections: Two Neutrik Speakon connectors and two parallel jacks. Enclosure: Vented Crossover: LR High Frequency Protection: YesPhysicalDimensions (H x W x D): 17" x 15" x 15" (43.2cm x 38.1cm x 38.1cm) Weight: 53 lbs./24.1 Kg, 16, EA; LI 020, (Brand Name or Equal) Loudspeaker - Soundbridge monitor loudspeaker - Monitor Loudspeaker Specifications: Cabinetry The cabinet design shall use13 ply 3/4‖ high quality Baltic birch plywood with dado joints, recessed baffle and a 16 gauge front perforated grill for long lasting durability. The baffle is cut from 1 MDF to enhance acoustical properties and to give the components a rigid interface. Two Neutrik Speakon connectors shall be installed. Transducers The two-way cabinet shall be loaded with a 12 cast aluminum low frequency driver and a 1 titanium high frequency compression driver. The titanium high frequency driver shall be coupled with a durable cast horn for proper dispersion. The cabinet shall be tuned by means of a vented port set at the optimum frequency. High Frequency Protection The loudspeaker feature a high frequency device protection system with LED indicators mounted on the baffle. A green LED which lights when there is signal present and a red LED which lights when the OPC (overload protection circuitry) senses an overload condition in the HF driver. The OPC disconnects the HF driver temporarily, and the red LED flashes, indicating an overload. When the HF driver cools, or the power is decreased, the OPC automatically resets itself and signal is restored to the HF driver Frequency Response: 60hz-18Khz Power Handling: 450w (cont.) Sensitivity (1 watt/meter): 99dB Nominal Dispersion: 70v x110h Impedance: 8 Ohms Transducer Components Low Frequency: 12‖ woofer High Frequency: 1‖ titanium Audio Input Connections: (2) 1/4‖ jacks & (2) Neutrik Speakon Connectors Enclosure: Vented Crossover: LR High Frequency Protection: Yes Steel Pole Mount: Yes PhysicalDimensions (H x W x D): 23" x 18.8" x18.8" (58.4cm x 47.8cm x 47.8cm) Weight: 49 lbs./22.3Kg, 13, EA; LI 021, (Brand Name or Equal) Stage Lights - Ellipsoidal Stage lights - Lighting Fixture Specifications: General The instrument shall be a ellipsoidal spotlight or approved equal. Physical The spotlights are constructed of rugged, die cast aluminum, free of burrs and pits, finished in black, high temperature epoxy paint. The spotlight shall provide, but not be limited to: Rugged die-cast aluminum construction Ten interior baffles to eliminate beam scattering and spill light. Thermally insulated, precision focus knob. A sealed reflector housing that shall prevent all light leaks. 17 heat-sink fins cast into the reflector housing for temperature control. Integral cable clamp for power leads. A brass self-retaining screw to retain the lamp socket Sturdy gel frame holders with two accessory slots and a top mounted, quick release gel frame retainer. Rugged steel yoke with 300+ rotation of fixture within yoke Positive locking, hand operated yoke clutch. Unit shall be nominally 11‖long by 10‖ wide. Unit shall not weigh more than 8.5 pounds (without c-clamp). The spotlight shall be UL and cUL listed and so labeled. Electrical The unit shall have an operating range of 115-240V, 50/60Hz. The unit shall be capable of using a maximum of 750W HPL lamp. The three conductor, 36‖ leads shall be rated for high temperature and encased in a glass fiber outer sleeve. The unit shall be capable of utilizing ETC Dimmer Doubling technology. Lamp The instrument shall use only one lamp type, the HPL lamp. Fixtures that require the purchasing of multiple lamp types to achieve different field angles shall not be acceptable. The lamp shall: Be an HPL lamp consisting of a compact tungsten filament, contained in a krypton-filled quartz envelope Mount axially within the reflector and shall be pre-focused within the reflector. Have an integral die cast aluminum heat sink that reduces seal temperature and ensures proper lamp alignment. Use an ATP 220 nickel gold plated socket. Lenses Lens sets shall consist of two patented wave lenses. One clear and one stippled. Lenses shall be heat resistant, borosilicate glass. Beam orientation of 25-45 (spot to flood) shall be possible through rotation of exterior rotation knob connected to a rotatable collar housed in the front of the unit.Fixtures which require user to reposition the lamp socket to change the beam angle shall not be acceptable. Optical The optical train shall combine a compact filament lamp with modified parabolic and multifaceted reflector. Reflector finish shall be an Enhanced Aluminum deposition. Reflector shall be cast into a heat sink assembly. Reflector efficiency shall be a minimum of 93%. Reflectors of pressed aluminum sheet construction shall not be acceptable, 18, EA; LI 022, (Brand Name or Equal) Lighting Dimmer - Elation Lighting Dimmer Pack -D -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.

59--Audio Visual Equipment

Department of the Army, Army Contracting Agency, South Region | Published September 7, 2009  -  Deadline September 11, 2009
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W45CMJ92112001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 443112 with a small business size standard of $9.00M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-11 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT HOOD, TX 76544 The USA ACA Fort Hood requires the following items, Meet or Exceed, to the following: LI 001, LCD Projector: Mitsubishi 6000 Lumen, LCD Projector Specifications: General Device Type: LCD projector Built-in Devices: Speaker Width: 17.1 in Depth: 17.4 in Height: 6.9 in Weight: 19.8 lbs Projector / Panel Image Brightness: 5500 ANSI lumens Image Contrast Ratio: 600:1 Image Size: 5 ft - 25 ft Projection Distance: 7.5 ft - 40 ft Resolution: 1024 x 768 Native Aspect Ratio: 4:3 Color Support: 24-bit (16.7 million colors) Lamp Type: 270 Watt Lamp Life Cycle: 2000 hour(s) Features: Picture in picture, ColorView Natural Color Matrix, 3D CineView Projector Lens System Lens Aperture: F/1.8-2.1 Video Input Analog video format: PAL-M, PAL-N, PAL, NTSC 4.43, PAL 60, NTSC, SECAM Analog video signal: Composite video, RGB, S-Video, Component video Digital Television Video Formats: 525p, 1080i, 720p Video Output Analog video signal: RGB Video Input DeviceType: None Audio Input Type: None Audio Output Type Speakers: Integrated Sound Output mode: Mono Sound Output Power per Channel: 5 Watt Speaker(s): 1 Mixed channel Input Device Type: Remote control - External - Wireless Expansion / Connectivity Interfaces: 1 x Composite video input - BNC, 1 x Audio line-in - RCA X 2, 2 x Serial RS-232C - 8 pin mini-DIN ( Management ), 1 x Component video / RGB input - BNC X 5, 1 x Audio line-out - Mini-phone 3.5 mm, 1 x Audio line-in - Mini-phone 3.5 mm, 1 x S-video input - 4 pin mini-DIN, 1 x Remote control input, 1 x VGA output - 15 pin HD D-Sub (HD-15), 1 x S-video input - BNC X 2, 1 x USB - 4 pin USB Type B, 1 x Composite video input - RCA, 1 x VGA input - 15 pin HD D-Sub (HD-15), 1 x Remote control output Miscellaneous Included Accessories: Included Projector Accessories Lens cover Cables Included: 1 x Serial cable, 1 x A/V cable, 1 x VGA cable Miscellaneous compliant standards: UL 60950, CSA 22.2 No. 950, FCC Class B certified Power Power Device Power supply Voltage Required AC 120/230 V Power Consumption Operational 380 Watt Environmental Parameters Min Operating Temperature: 41 Degrees F Max Operating Temperature: 104 Degrees F Humidity Range Operating: 30 - 90% Sound Emission: 30db., 1, EA; LI 002, Projector Mount: Projector Mount Specifications: Ceiling projector mount for the Mitsubishi 6000 Lumen, LCD Projector., 1, EA; LI 003, Amplifer: Altinex video distribution Amplifer., 1, EA; LI 004, Seamless Switcher: Kramer Dual scaler seamless switcher Specifications: INPUTS: 8 sets of universal BNC connectors: R/Pr, G/Y/CV, B/Pb/C, Hs/Cs, and Vs, each programmable for use as CV, YC, RGB, YCbCr, YPbPr, RGBS or RGBHV. PREVIEW OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors. PROGRAM OUTPUT: 1 x DVI-D on a DVI-I connector. 1 x VGA (VGA through UXGA) on a 15-Pin HD F connector. 1 x RGBHV / YPbPr on BNC connectors. CONTROLS: Front panel buttons, high contrast LCD, IR remote control, ETHERNET, RS-232, and RS-485. ADDITIONAL CONTROLS: Freeze, zoom, different selectable vertical refresh rates, ProcAmp control, output image scaling, Picture-In-Picture, text overlay, and aspect ratio change. POWER SOURCE: 100-240 VAC, 50/60Hz 55VA DIMENSIONS: 19 (W), 9.3 (D), 3RU (H) rack mountable WEIGHT: 5.5 kg. (12.2 lbs.) ACCESSORIES: IR remote control, power cord, null modem adapter OPTIONS: Control panel, 1, EA; LI 005, Switcher Remote: Kramer Dual Scaler Seamless Switcher Remote Specifications: All the front panel controls of the Seamless Switcher are replicated. Convenient Switching Control: T-Bar or Take button with selectable transition speed control. Menu Button: Switcher Control via on-screen display on Preview output. Wipe Direction Control: Via front panel buttons. Control Multiple Units: Up to 4 Seamless Switchers can be controlled from one Switcher Remote. Gooseneck Lamp: For low light environments. Control: 4 RS-485s to control up to 4 Seamless Switchers and 1 RS-232 for firmware upgrades. Power Supply: 12V DC. Standard 19 Rack Mount Size: 4RU. Angled faceplate allows for free standing use on a table. Ports: 4 sets of RS-485 3-PIN Terminal Block Ports Controls: Front panel buttons, RS-232, and RS-485 Power Source: 12VDC, 240mA Dimensions: 19 inch (W), 3.4 inch (D), 4U (H) rack mountable. Weight: 1.58kg. (3.5lbs)., 1, EA; LI 006, Camera: Pelco Video Camera, Video Camera Optics Specifications: Signal Format: NTSC or PAL Scanning System: 2:1 Interlace 2:1 Interlace Image Sensor Effective Pixels: 1/4-inch EXview HAD NTSC: 768 (H) X 494 (V) PAL: 752 (H) X 582 (V) Horizontal Resolution: NTSC>540 TV Lines PAL>470 TV Lines Lens: f/1.4 (focal length, 3.4~119 mm) Zoom: 35X optical, 12X digital Zoom Speed (optical range): 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds Horizontal: 55.8 at 3.4 mm wide zoom Angle of view: 1.7 at 119 mm telephoto zoom Focus: Automatic with manual override Maximum Sensitivity @35IRE NTSC/EIA 0.55 lux at 1/60 sec (color) 0.063 lux at 1/4 sec (color) 0.00018 lux at 1/2 sec (B-W) PAL/CCIR 0.50 lux at 1/50 sec (color) 0.062 lux at 1/3 sec (color) 0.00014 lux at 1/1.5 sec (B-W) Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync White Balance: Automatic with manual override Shutter Speed: NTSC Automatic (electronic iris)/Manual 1/2 ~1/30,000 PAL Automatic (electronic iris)/Manual 1/1.5 ~1/30,000 Iris Control: Automatic Iris Control with manual override Gain Control: Automatic/OFF Video Output: 1 Vp-p, 75 ohms Video Signal to Noise: >50 dB Wide Dynamic Range: 128X Electronic Image Stabilization: Integrated Image Enhancement: Integrated Video Camera Dome Drive Features: 256 Presets 0.1 Preset Accuracy RJ-45 Data Port for Software Update and Setup On-Screen Compass, Tilt, and Zoom Display 400/sec Pan Preset Speed and 200/sec Tilt Preset Speed Rotating Discreet Liner with Sealed Fixed Bubble Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom Variable Scan Speed: Programmable Between 1-40/sec Pan Motion Allows 0.1-150/sec Pan Speed Programmable Limit Stops for Auto/Random/Frame Scan Modes Auto-sensing Protocol (Coaxitron, RS-422 P and D); Accepts Competitive Control Protocol with Optional Translator Card Digital Position and Zoom Control and Feedback through D Protocol Built-in Menu System for Setup of Programmable Functions Auto Flip Rotates Dome 180 at Bottom of Tilt Travel Programmable Zoom Speeds., 2, EA; LI 007, Controller: Pelco PTZ Controller, Specifications: A full-function, desktop keyboard controller that can be used in a variety of applications. A barrel-type joystick provides precise pan and tilt control of fixed speed and variable speed receivers. Twisting the joystick clockwise or counter clockwise zooms the lens in or out, 1, EA; LI 008, Keyboard Kit Pelco Keyboard Kit, Specifications: Economical Full-Feature Keyboard; Select up to 256 Cameras from One Keyboard Connected to a String of MX4000 Genex Multiplexers; Select up to 128 Cameras from a Maximum of Four Keyboards through an MX4000SVR Genex Multiplexer Server; Variable Speed Control of Pan/Tilt Units Made by Keypad SelectionUsing Select-a-Speed Feature; Preset Position and Pattern Control;Main and Spot Monitor Control; Digital Zoom Control on Main Monitor; Auxiliary Operation., 1, EA; LI 009, Video Monitor: Marshall (4) Screen Rack Mount Video Monitor Specifications (Quad): Rack mountable unit that offers four 4" high-resolution active matrix LCD panels. Each of the four 480 x 234 pixel screens has its own set of controls for color, tint, contrast, and brightness. Each panel has its own input with active loop-through feature, a 3 color tally system, and auto-recognition of NTSC or PAL formats. This unit is only 2U high, can be tilted up to 100 degrees while rack mounted, and is the smallest video monitoring system of its kind. All V-R Series models are constructed of steel and aluminum, and include a power supply. Display Viewing Area: 4: (3.23 x 2.43) Resolution Pixels: 480H x 234V Dot Pitch: 0.17mm x0.264mm Brightness: (in cd/m2): 300 System: NTSC/PAL Auto Recognition Inputs Per Panel (total): 1 (4) Composite Dimensions: 19.125W x 3.43H x 1.9D Weight: 3.5 lbs Power Consumption: 12 VDC, 5.0 Amps., 2, EA; LI 010, Monitor Delvcam (2) Screen Rank Mount Video Monitor Specifications (Dual): DISPLAY: 7 active matrix TFT-LCD (16:9) BACK LIGHT: Internal CCFT DOT MATRIX: 0.129 (H) x 0.447 (V) RESOLUTION: 1440 Horizontal x 234 Vertical BRIGHTNESS: 300cd/m2 (NIT) CONTRAST: 150:1 VIEWING ANGLE: U: 15 / D: 35, R / L: 50 PIXEL CONFIGURATION: Striped VIDEO SIGNAL: 1Vpp into 75Ω Terminated & Looping Input STANDARD: NTSC-M POWER REQUIREMENTS: 110-220VoltsAC50/60 cycAuto switching, 14watts OPERATING TEMPERATURE: 32-122 Degrees F (0-50C) REMOTE CONTROL: Handheld Infrared DIMENSIONS: 19"W x 4.5"D x 7"H (4RU) WEIGHT: 16.0 Lbs. Features: Picture Mode Select: 16:9 Wide Cinema Mode 4:3 Normal Mode 4:3 Wide Mode 4:3 Full Mode Looping BNC inputs High Resolution Performance NTSC-M Standard CATV, UHF, VHF TV ATSC Receiver (Monitor A only) Allows 180 of tilt while mounted in rack Low power consumption and heat dissipation for mobile applications Fits in standard 19" rack, 4 spaces high On screen color, tint, brightness and contrast controls Wireless I/R remote control., 1, EA; LI 011, DVD/CD duplicator Microboards (10) Disc DVD/CD duplicator Specifications: Burn Speed: DVD 18X, CD 52X (Selectable recording Speed) Supported Formats: DVD-Video, DVD-ROM, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD-DL,CD-DA (Red Book), CD-ROM Modes 1 & 2, XA Forms 1 & 2, ISO 9660, Photo CD, CD-Extra, Mixed Mode, Video CD, Hybrid CD, HFS Connectivity: Standalone; PC-connect upgrade available Verification: Bit-to-Bit Data Power: 100-240 VAC 50/60HZ Environment: 10 degrees C to 40 degrees C Humidity: 20% to 80% Hard Drive Optional PC Interface Optional, 1, EA; LI 012, Baluns Vbaluns video Baluns, 2, EA; LI 013, Modulator Blonder Tongue RF Modulator Specifications: Input: Video: 1V p-p @ 75 ohms Audio: 1V RMS @ 47K ohms Video Performance: Differential Gain: 4% Differential Phase LCD display and logically arranged encoders. Extensive gating, compression, and equalization facilities. Built-in USB memory recorder/player for recording or BGM playback. Virtual Rack with effects and EQ for just about any processing requirements. Scene memory for instant store and recall of all console parameters, including head amp gain. Advanced access management includes user keys (standard USB memory devices) that can be issued with different access levels for different users. Editor Software for enhanced operability and programmability. Internal Processing: 32bit (Accumulator=58bit) Sampling frequency rate: Internal: 44.1kHz, 48kHz External: 44.1kHz (-10%) to 48kHz (+6%) Signal delay: Less than 2.5ms (INPUT to OMNI OUT @48kHz) Total harmonic distortion Input Gain=Min: CH INPUT to OMNI OUT Less than 0.05% 20Hz to 20kHz Frequency response: CH INPUT to OMNI OUT 0, +0.5, -1.5dB 20Hz to 20kHzDynamic range (Maximum level to noise level):110dB, DA Converter (OMNI OUT) 108dB, AD+DA (OMNI OUT) Hum & noise level: -128dB, Equivalent input noise (20-20kHz, Rs=150ohms, Input Gain=Max) -84dB, Residual noise Crosstalk (@1kHz) Input Gain=Min: -80dB, Adjacent input channels -80dB, Input to output Power requirements: 110V-240V, 50/60Hz Power consumption: 32 Channel 170 Watts 16 Channel 95 Watts Weight: 32 Channel: 19.4kg, 16 Channel: 12.0kg Analog Input Characteristics Input: 1-16 or 1-32 Gain: -62dB to +10dB Actual Load Impedance: 3K ohms Input Level Sensitivity: -82dBu to -10dBu Nominal: -61dBu to +10DBu Max Before Clip: -42dBu to +30dBu Connector Type: XLR Analog Output Characteristics OMNI OUT 1-32 Impedance: 32ohms Gain SW +24dB Nominal: +4dBu Max Before Clip: +24dBu Connector Type: XLR PHONES OUT Impedance 15ohms Nominal: 75mW Max Before Clip: 150mW Connector Type: Stereo ‖ Phone Jack Digital Output Characteristics Terminal: (2) 2TR In Digital Coaxial & 2RT Out Digital Coaxial Format: IEC60958 Data Length: 24bit Level: 0.5Vpp/75ohms Connector: RCA pin jack Control I/O Characteristics Terminal: Network (Ethernet) Format: 100 Base-T Connector: RJ-45 Terminal: MIDI IN and MIDI OUT Connector: DIN-5Pin x2 Terminal: WORD CLOCK IN Level: TTL/75ohms, Terminated Connector: BNC WORD CLOCK OUT Level: TTL/75ohms Connector: BNC Terminal: Lamp Level: 0-12V Connector: XLR-4-31 Type Terminal: USB HOST Format: USB1.1 Level: USB Connector: A Type USB., 1, EA; LI 015, Mixing Console Yamaha LS9-16 Digital Audio Mixing Console, Digital Audio Mixing Console 16 and 32 Channel Digital Mixer Specifications: General Specifications Shall have16 or 32 mono mic/line input channels plus 4 stereo input channels, expandable up to 32 or 64 channels in two layers. 16 mix buses, 8 matrix buses, plus stereo and mono buses with LCR mode. Top-performance analog mic/line preamplifiers. Color LCD display and logically arranged encoders. Extensive gating, compression, and equalization facilities. Built-in USB memory recorder/player for recording or BGM playback. Virtual Rack with effects and EQ for just about any processing requirements. Scene memory for instant store and recall of all console parameters, including head amp gain. Advanced access management includes user keys (standard USB memory devices) that can be issued with different access levels for different users. Editor Software for enhanced operability and programmability. Internal Processing: 32bit (Accumulator=58bit) Sampling frequency rate: Internal: 44.1kHz, 48kHz External: 44.1kHz (-10%) to 48kHz (+6%) Signal delay: Less than 2.5ms (INPUT to OMNI OUT @48kHz) Total harmonic distortion Input Gain=Min: CH INPUT to OMNI OUT Less than 0.05% 20Hz to 20kHz Frequency response: CH INPUT to OMNI OUT 0, +0.5, -1.5dB 20Hz to 20kHzDynamic range (Maximum level to noise level):110dB, DA Converter (OMNI OUT) 108dB, AD+DA (OMNI OUT) Hum & noise level: -128dB, Equivalent input noise (20-20kHz, Rs=150ohms, Input Gain=Max) -84dB, Residual noise Crosstalk (@1kHz) Input Gain=Min: -80dB, Adjacent input channels -80dB, Input to output Power requirements: 110V-240V, 50/60Hz Power consumption: 32 Channel 170 Watts 16 Channel 95 Watts Weight: 32 Channel: 19.4kg, 16 Channel: 12.0kg Analog Input Characteristics Input: 1-16 or 1-32 Gain: -62dB to +10dB Actual Load Impedance: 3K ohms Input Level Sensitivity: -82dBu to -10dBu Nominal: -61dBu to +10DBu Max Before Clip: -42dBu to +30dBu Connector Type: XLR Analog Output Characteristics OMNI OUT 1-32 Impedance: 32ohms Gain SW +24dB Nominal: +4dBu Max Before Clip: +24dBu Connector Type: XLR PHONES OUT Impedance 15ohms Nominal: 75mW Max Before Clip: 150mW Connector Type: Stereo ‖ Phone Jack Digital Output Characteristics Terminal: (2) 2TR In Digital Coaxial & 2RT Out Digital Coaxial Format: IEC60958 Data Length: 24bit Level: 0.5Vpp/75ohms Connector: RCA pin jack Control I/O Characteristics Terminal: Network (Ethernet) Format: 100 Base-T Connector: RJ-45 Terminal: MIDI IN and MIDI OUT Connector: DIN-5Pin x2 Terminal: WORD CLOCK IN Level: TTL/75ohms, Terminated Connector: BNC WORD CLOCK OUT Level: TTL/75ohms Connector: BNC Terminal: Lamp Level: 0-12V Connector: XLR-4-31 Type Terminal: USB HOST Format: USB1.1 Level: USB Connector: A Type USB., 1, EA; LI 016, DVD/CD Player Tascam DVD/CD Player Specifications: General Power requirements: AC 120V, 60Hz (US, Canada, Mexico) AC 230V, 50Hz (Europe) AC 230V, 50Hz (Australia) Power consumption: 11W (at operation) 0.2W (in standby mode) Dimensions (W x H x D): 19" x 2" x 10.6" (482 x 51 x 269 mm) Weight: 5.1 lbs (2.3 kg) Audio section Analog output: Audio out: -8 dB/1 k Digital output*: Digital out (optical): -21 dBm to -15 dBm (660 nm 30 nm) * Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency - 32 kHz, 44.1 kHz, 48 kHz) Video section Video system: NTSC Horizontal Resolution: 500 lines Signal-to-Noise Ratio: 64 dB Video output level Composite: 1.0 V (p-p)/75 S-video-Y: 1.0 V(p-p)/75 S-video-C: 0.286 V (p-p)/75 Component-Y: 1.0 V (p-p)/75 Component-Pb/Pr: 0.7 V (p-p)/75 HDMI HDMI Output (Ver. 1.1): HDMI RS-232C Serial command: 9-Pin D-SUB 1U rack-mountable single disc player with a powered loading tray. The DVD player reads DVD Video, DVD Audio (2-channel only), Video CD, CD-DA, MP3, WMA, WAV, JPEG, ASF, MPEG-2/MPEG-1, and DivX. The player is capable of playing back properly finalized DVD +R/+RW discs. Outputs consist of HDMI audio/video out and Composite, S-Video, and Component video outputs. Rear panel stereo outputs are unbalanced (RCA) and digital outputs are optical. Digital outputs can pass Dolby Digital and DTS surround streams for later decoding. The DVD player performs multiple playback modes, including slow motion and frame by frame playback, power on play, aspect adjustment, selectable scan mode, tray-lock, FVPP, and Progressive Scan. When stopped the DVD player output is black. The DVD player provides extensive bi-directional RS-232 serial control. I/R remote control included. It is equipped with a screen saver function and defeatable On-Screen Icons. The unit is also able to play "finalized" +R/+RW (video format discs only). The unit is HDCP compliant., 2, EA; LI 017, DVD/CD Recorder Tascam DVD/CD Recorder Specifications: This device is a three-in-one video recorder that combines (3) all-digital formats of MiniDV, 250GB HDD, and DVD in a compact package complete with A-D encoding as well as various editing and dubbing capabilities. DV native format recording to HDD can be performed, allowing the unit to make exact copies of DV tapes. The model is equipped with an RS-232C interface to further enhance system applications. Thanks to these advantages, this unit is ideal for professionals as it makes media duplication and professional archiving of existing analog footage easier than ever. Easy to use and connect. No complicated wiring Use it as a standalone editing/dubbing/viewing production system --or-- Plug it in to your existing system Multi-format DVD (recording & playback of DVD-R, DVD-RW, and DVD-RAM as well as playback of +R or +RW.) Simple non-linear 'play-list' editing built-in DV Native Format Recording to HDD Up to 18 hours of HDD recording in DV modeCan be used as extended length DV recorder from input via IEEE-1394! Create finished DVD programs without a computer! Compatible with most non-linear editing systems IEEE-1394 dubbing to/from MiniDV tape Program storage on HDD High quality DVD creation and duplication 250 GB HDD storage for extended recording time (up to 473 hours in FR480 mode) and high speed DVD duplication (up to 8X) Full auto repeat discs can be made BNC Video output connector DVCAM playback capability RS-232C interface for custom installations., 1, EA; LI 018, Processor Shure System Processor Specification: System Processor The primary interface for this device is a Windows-based software program that mimics the functional block diagrams used in sound system design. The processing blocks shall be applied in any order, to any input or output. Processing blocks shall be able to be copied and pasted to duplicate processors across multiple channels. The device shall allow real-time design changes, so processing blocks can be added, removed or changed during system tuning. The security options shall allow complete lock of the system to prevent undesired tampering or to restrict user access to certain parts of the system. Control input pins shall allow connection of potentiometers, contact closures, for remote control of preset changes, volume, and muting. Specifications and Features: Automatic Feedback Reduction 5-, 10-, and 16-filter single-channel and stereo modules Frequency resolution: 0.1 Hz Filter width: 1/10 to 1/70 per octave EQ and Shelving Cut/Shelf Equalizer High/low shelf filters: 6 and 12 dB/octave slopes, 18dB boost/cut High/low cut filters: 6, 12, 18, and 24 dB/octave slopes High/low cut filter types: Butterworth, Bessel and Linkwitz-Riley Graphic Equalizers 10- and 30-band modules Combining and non-combining Parametric Equalizers 3, 5, 7, and 10 filter modules, plus cut/shelf filters Bandwidth: 1/70 to 4 octaves Filter depths: up to 18dB Crossover Independently adjustable slopes Butterworth, Bessel & Linkwitz-Riley up to 24 dB/octave Dynamics Processing Automatic Gain Control Maximum boost: 12dB Compressor/Limiter Selectable soft knee or fixed hard knee Single-channel or stereo Peak Stop (look-ahead) limiter Ducker Gate and Downward Expander Delay 10 seconds of available delay memory 20 microsecond resolution Matrix Mixer Routes any input to any output Independently adjustable cross point gain, muting, and polarity Frequency Response 20 Hz to 20 kHz +/ 1dB Dynamic Range 110 dB minimum, A-weighted, 20 Hz to 20 kHz Digital-to-Analog, Analog-to-Digital Conversion 24 bit Impedance Input: 10k ohms Output 120k ohms Input Clipping Level +24 dBu minimum Output Clipping Level +24 dBu +12 dBu with 12 dB pad engaged +6 dBu with 18 dB pad engaged Total Harmonic Distortion < 0.05%, +4 dBu, 20 Hz to 20 kHz Propagation Delay < 1.5 ms. Processing blocks add no latency Polarity Input to output: non-inverting (inverting optional) Operating Voltage 100-240 VAC, 50/60 Hz (auto-switching), 1 A, maximum Maximum Power Drain 45 W Temperature Range Operating: 7 degrees to 49 degrees C (19 degrees to 120 degrees F) Storage: 29 degrees to 74 degrees C (20 degrees to 165 degrees F) Dimensions: 482.6 mm x 247.7 mm x 44.4 mm (19 in. x 9.75 in. x 1.75 in.) Weight 2.83 kg (6.25 lbs)., 1, EA; LI 019, Switch Shure Digital Remote Switch Specifications: Hardware Adapter: Communicates directly with DFR11EQ Version 5 by converting the analog signal generated by the switch into digital RS-232. Adapter plugs directly into the RS-232 serial port on back panel of the DFR hardware unit. The Switch Assembly: Consists of a 10-position switch that can be customized to select up to 10 scene presets., 1, EA; LI 020, Processo -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.
  • 1