Public tenders for architect, architecture in Port-hueneme United States

Find all Architecture tenders in the world.
Finding business opportunities has never been easier.

Results for architecture. Make a new search!

A--This announcement seeks out technologies and methodologies to improve expeditionary logistics, and applies to Navy and USMC forward operating environments.

Department of the Navy, Naval Facilities Engineering Command | Published May 28, 2013  -  Deadline May 27, 2014
cpvs

This announcement constitutes a Broad Agency Announcement (BAA) for the Naval Facilities Engineering and Expeditionary Warfare Center (NAVFAC EXWC). This announcement seeks out technologies and methodologies to improve expeditionary logistics, and applies to Navy and USMC forward operating environments (for information on the expeditionary environment, see public material on the Marine Corps Operating Concept, Expeditionary Maneuver Warfare, and Enhanced MAGTF Operations). NAVFAC EXWC is interested in expeditionary technologies and methodologies that are new, innovative, advance the state-of-the-art, or increase knowledge or understanding. To be eligible for consideration and possible contract award, the Technology Readiness Level (TRL) of any proposed technology or methodology must be 6 or lower. Each submission must address only one of the below areas to be considered. Multiple submissions are allowed. TOPIC NO. 1: ENHANCED INFRASTRUCTURE. Innovative technologies are sought to advance the state of the art in lightweight, mobile infrastructure elements such as shelter systems; bridging systems; power generation, distribution, and monitoring equipment; roadway; and landing pad systems. Technologies may include but are not limited to advanced materials, fabrication techniques, repair techniques, modular construction, power transmission, and intelligent resource allocation systems. TOPIC NO. 2: ENHANCED SELF SUFFICIENCY FOR WATER. Technologies are sought for the treatment of water in the expeditionary environment, with an emphasis on small-scale systems with production rates of up to 1 gallon per minute. Topics of interest include disinfection, filtration, and desalination technologies at both the component and system level. Technologies which minimize weight, cube, energy, and logistics requirements are of interest. These may include: advanced filtration barrier technologies with wide operational envelopes (temperature, salinity, contaminates, etc.), field cleanable filter systems, advanced flow schemes for particle separation, small and efficient desalination technologies, anti-fouling technologies, efficiency improvement schemes, and energy recovery technologies. Innovative water packaging, storage, and distribution technologies will be considered, as will water quality-monitoring systems. TOPIC NO 3: ENERGY EFFICIENT EXPEDITIONARY FACILITIES AND EQUIPMENT. Technologies are sought for increasing the energy efficiency of expeditionary facilities, to include advanced metering, monitoring, planning, and distribution technologies for control of electrical, water, natural gas, and thermal systems. Insulation and thermal management technologies are sought for all types of shelter systems. Technologies are sought to increase the efficiency of environmental conditioning units (ECUs) by more than 10% relative to currently fielded units. Such technologies may include but are not limited to: modifications which can drop in to existing ECUs, advanced vapor compression cycles utilizing coolants with a global warming potential less than 4, advanced dehumidification technologies to decrease the latent cooling load in humid environments, advanced non-vapor compression cycles, and sorption type systems which can utilize low grade waste heat. TOPIC NO 4: TOOLS AND METHODS TO FORECAST EFFECTS OF ENHANCED TECHNOLOGIES. Innovative tools and techniques are sought to investigate the effects of improved logistics technologies and their added capabilities on future expeditionary operations. Such modeling and simulation tools may be used to guide future logistics technology development. TOPIC NO 5: ENHANCED LOGISTICS TRACKING TECHNOLOGIES. Innovative sensors, prognostic systems, logistics command and control tools and methods, and modeling and simulation technologies are sought to provide improved awareness of inventory and equipment location and condition, as well as supply chain conditions. TOPIC NO 6: ENHANCED LOGISTICS AND TRANSPORTATION TOOLS. Transportation and supply chain monitoring is critical for all aspects of expeditionary warfare. Open architecture software tools are sought for inclusion in an eco-system of intelligent software agents able to reason over semantically enabled transportation and supply chain data. The primary user interface to these tools will be through web browsers and mobile hand-held devices. Modular tools that operate in a service-oriented architecture and can span the full range of logistics and transportation planning in support of expeditionary warfare are of interest.

MK160 Software support license

Department of the Navy, Naval Sea Systems Command | Published December 17, 2015  -  Deadline December 28, 2015
cpvs

The Naval Surface Warfare Center (NSWC), Port Hueneme Division (PHD) intends to enter into a Firm Fixed Price (FFP) contract with Green Hills Software, Inc. CAGE: 04LG3, in accordance with the statutory authority 10 USC 2304(c)(1) as implemented by FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Establishing an alternative source would result in not only duplication of costs to the Government, which is not expected to be recovered through competition, but would also require unacceptable delays in meeting current requirements. This procurement is for Solaris hosted network floating licenses for annual support To Optimize C/C++ compiler and toolchain for Solaris native processors and for Power architecture processor, as well as annual support for Ada95 compiler and toolchain, Ada Bare Board run-time, and AdaMULTI and Ada95 compiler and toolchain. This acquisition is being procured under NAICS Code 511210. This notice is not a request for competitive proposals. Inspection and Acceptance will be at destination (NSWC PHD). Contract award is expected on a FOB destination basis. This will be a commercial acquisition in accordance with FAR Part 12. The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

R--Operation, Maintenance and Repair of the M/V INDEPENDENCE

Department of the Navy, Naval Facilities Engineering Command | Published February 5, 2015  -  Deadline February 20, 2015
cpvs

This is a synopsis of a solicitation for a single-award, Indefinite-Delivery/Indefinite Quantity (IDIQ) contract with Cost Plus Fixed Fee Task Orders in support of the Naval Facilities Engineering Command (NAVFAC) Engineering and Expeditionary Warfare Center (EXWC). The outcomes to be achieved are the operation, maintenance and repair of the M/V INDEPENDENCE, a ship owned by NAVFAC EXWC that supports RDT and E projects for the Navy. The contractor’s primary effort is to operate the M/V INDEPENDENCE and maintain the vessel’s mission readiness, as specified under individual delivery orders issued during the ordering period. The contractor shall provide a properly licensed crew, support personnel, facilities, and appropriate supervision to perform support services including navigation, operation, management, longshoring, marine equipment design and fabrication, logistics, alterations, and dry-docking to the M/V INDEPENDENCE as required under individual task orders. The contractor shall also provide alternate or additional vessels and crews to support an offshore mission should the M/V INDEPENDENCE not be able to support the mission due to schedule conflicts, mechanical problems, or when an additional vessel is required for the mission. The procurement method used for this solicitation is Contracting by Negotiation FAR Part 15. The NAICS: 541330 with a Marine Engineering and Naval Architecture size standard of $38.5 Million. This requirement will be solicited as a small business set-aside. The contract is anticipated to have a base plus four (4) option years. Only the base period of the contract will offer a minimum guarantee via issuance of a seed task. This contract is a follow-on contract for similar services under contract N62583-10-D-0363. Offerors can view and/or download the solicitation, and any attachments, at https://www.neco.navy.mil/ when it becomes available. The solicitation utilizes source selection procedures which require offerors to submit a technical proposal, past performance and experience information, and a cost proposal for evaluation by the Government. Offerors must be registered in the System for Award Management (SAM) database to be considered for award. Registration is free and can be completed on-line at www.sam.gov. Questions should be directed towards the email POC, below.

CMBRE Support

Department of the Navy, Naval Air Systems Command | Published May 9, 2016  -  Deadline May 19, 2016
cpvs

Presolicitation Notice CMBRE Tech Support In accordance with FAR 6.302.1 Only one responsible source and no other supplies or services will satistfy agency requirements The Naval Air Warfare Center, Weapons Division, China Lake, CA intends to procure on an other than full and open competition basis to Orbital ATK 13133 34th St North, Clearwater, FL 33762. Orbital shall conduct studies and provide related documentation to support study results; provide independent analyses, simulations, and technological assessments; provide technical training with respect to maintenance and operations; provide consultation for logistics support; provide system interface, hardware and software related documentation, and perform other related tasks in systems definition, architecture, design, reliability and system safety. Orbital ATK is the manufacturer of the CMBRE. This notice of intent is not a request for competitive quotations; however, any firm believing it can fulfill the requirement identified above may submit a written response which shall be considered by the agency. The written response shall reference solicitation number N68936-16-T-0212 and provide a capability statement that clearly indicates the firm's experience, assets, background, and ability to perform the required work without compromising the quality, accuracy, reliability, and schedule. Respond by mail to NAWCWD, Code 245100D, Attn: Gayle Cline, 429 E. Bowen Rd. - Mail Stop 4015, China Lake, CA 93555-6108, or E-mail to gayle.cline@navy.mil. If you provide a quote via any other method, provide us with the date package was sent, commercial carrier, and tracking number so that we can ensure that your quotation is reviewed for consideration during the award process.All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/. Written responses shall be submitted by e-mail to the point(s) of contact listed below or mailed to the Contracting Office Address listed below no later than XX days from this notice date. (POCs information auto-populates via table above.) Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within FBO. See the DLIS website for registration details: http://www.dlis.dla.mil/jcp/.

Y--Florida National Cemetery | Design Build 7,500 - Niche Columbarium | Project No. 911CM3024

Department of Veterans Affairs, VA National Cemetery Administration Construction Support Division | Published July 1, 2015  -  Deadline July 16, 2015
cpvs

The Department of Veterans Affairs National Cemetery Administration (NCA) anticipates awarding a firm-fixed price Design-Build contract based upon a two-phase Design Build selection procedure. This Pre-Solicitation Notice /Request for Qualifications (RFQ) represent Phase I (One) of the II (Two) Phase process. To be further evaluated, firms must submit information in response to the criteria established in this RFQ by the specified due date and time. The North American Industry System (NAICS) Code for this requirement is 237990, and the U.S. Small Business Administration Size Standard is $36.5 Million dollars. This project is 100% Set-aside for Service Disabled Veteran Owned Small Business (SDVOSB). To be eligible for award the SDVOSB must be considered small under the relevant NAICS code and must be registered and verified in the following websites: Those desiring to receive an award from this solicitation must be registered at www.vetbiz.gov. Companies must have the Certified Veteran Enterprise (CVE) seal on their registration to be considered : the VIP database will be checked both upon receipt of an offer and prior to award; firms must be currently registered in the System for Award Management (SAM) database at www.sam.gov and have completed online Representations and Certifications prior to contract award; www.cpscontractor.nih.gov and www.vets100.vets.dol.gov/. The Scope of Work includes the Design Build of a 7,500 Niche Columbarium at Florida National Cemetery. The purpose of this project is to design and construct a 7,500 niche columbarium on burial section 615 at the existing cemetery. The Contractor shall recommend the most appropriate location for the new columbarium, all associated access roads, walkways, landscaping, site infrastructure, and irrigation within the project site. In the design of new work under this contract, the DB team shall consider all requirements (other than procedural requirements) pertaining to: 1. Zoning laws 2. Environmental and erosion and sediment control regulations; and 3. Laws relating to landscaping, open space, minimum distance of a structure from property lines, historic preservation, aesthetics and other similar laws of the State and local political division, which would apply to the project if it were not to be constructed or altered by the U.S. Government. The contractor's design will be based upon NCA's design criteria and program guide located on the VA website and a similar Schematic (SD) drawing, project requirements narrative, and Performance Technical Specifications (PTS) that will be provided in a subsequent Request of Proposal (Phase II). Contractor recommendations for creative cost savings and/or quality-enhancing design solutions will be considered via the later RFP/Phase Two process. CONSTRUCTION MAGNITUDE: The magnitude of this construction project is anticipated to be between $5,000,000 and $10,000,000 in accordance with VAARS 836.204. The Contract Duration is four hundred fifty-five (455) calendar days from issuance of the Notice to Proceed. The contract provides for preparation of Design Development (DD) and Construction Documents (CDs). The Design Build firm A/E who prepares the construction documents shall be a professional architect or engineer licensed in the State of Florida. The professional seal indicating such license by the state shall appear on the final construction documents. The architect whose seal is shown will be known as the Architect of Record. Record (redline) hard copy drawings and As-Constructed AutoCAD files drawings will also be required upon construction completion. All Design-Build (D-B) firms must have Phase I packets submitted to the Department of Veterans Affairs Vendor Portal on or before July, 2015 at 3:00 PM/EST. The instructions to register to the vendor portal are attached. Offeror packets will be evaluated based upon the following criteria in descending order of importance: 1. Firm's Technical Approach to the scope of work, (do not include detailed design or excessive technical information). Demonstrated ability to provide innovative, cost effective design and construction solutions, with emphasis and a commitment to improving on the initial design concepts without adding to the overall project cost; 2. Specialized experience and technical competence: a. Show experience as it relates to same or similar requirement (i.e. niche-columbarium, crypts); must show experience with design build construction projects for the A/E and the construction firm. b. Extent of design/build experience, especially experience that the Offeror's current A-E/construction company partnership have working together; c. Composition of the proposed key staff i.e. Project manager, design manager, and other key personnel. 3. Project Understanding: knowledge and understanding of project issues and risk. Explanation of how the offer proposes to ensure success of the project. 4. Past performance: Demonstrated record of performance; including completion schedule, quality of work, and completion within budget and ability to effectively schedule and manage a multi-disciplinary work force; ? SUBMISSION REQUIREMENTS - Past Performance Questionnaire The Offeror shall provide past performance information for each project provided under specialized experience. A completed Past Performance Questionnaire (PPQ), attached at the end of this solicitation must be provided per the following guidance. PPQ must also have contact information of the reference. a. The respondent must be familiar with the project, but not affiliated with the Offeror. b. The respondent must be able to provide an independent evaluation of the Offeror's performance on the referenced project. Design-Build (D-B) firms/teams that meet the requirements of this announcement are invited to submit a Standard Form (SF) 330, U.S. Government Architect-Engineer Qualifications, to the office indicated above for Phase I evaluation. The SF 330's are formatted for Architect-Engineer (A-E) and related services, but this form will be used for both design and construction qualifications. The SF 330 can be downloaded from the forms library section at the following website: " http//www.gsa.gov Please upload the request for qualifications to the DVA's Vendor Portal on or before July 15, 2015 by 3:00 PM/EST. Five (5) of the most highly-qualified Design-Build (D-B) firms will be short-listed to participate in Phase II of this Design-Build (D-B) selection process. Debriefings of successful and unsuccessful firms will be held after final selection has taken place and will be conducted, to the extent practicable, in accordance with 15.503, 15.506(b) through (f), 15.507(c), and 15.506(d)(2) through (d)(5). Note that 15.506(d)(2) through (d)(5) do not apply to architect-engineer contracts In Phase II, the firms short-listed will be sent the Request for Proposal (RFP) which will contain the Schematic Design Drawings, Project Requirements Narrative, Performance Technical Specifications (PTS), and evaluation criteria for technical and firm-fixed price proposals. Offerors will be asked to prepare a proposal that may include design enhancements/cost-savings measures, and a project management plan, describing the contractor's management philosophy, schedule, team organization, and quality control as part of the Phase II technical proposal. The RFP will not require design drawings as part of the Phase II submittal. A price proposal will be required along with the technical and management proposals and a sub-contracting plan. Short-listed Offerors will be asked to submit both a technical and price proposal based upon evaluation factors identified in the RFP. Award of a single contract will be made to the Offeror with the Lowest Price Technically Acceptable (LPTA). Debriefings will be made available after contract award. For inquiries and clarifications, the primary point of contact is Tiffany Thornton, Contracting Officer, telephone number (202) 632-5891, e-mail address tiffany.thornton@va.gov. NO COLLECT CALLS WILL BE ACCEPTED. Note: This Pre-Solicitation announcement is NOT a Request for Proposals (RFP). SUBMISSION REQUIREMENTS: Firms that fully meet the requirements described in this announcement are invited to submit a Letter of Interest and a completed SF 330 for each firm, a Team SF 330, and an organizational chart of the team. The organizational chart shall include names of the key personnel, firms, disciplines, roles and responsibilities and/or technical expertise. Submission of any additional supporting material is encouraged, but only the extent that it graphically (via drawings and photographs) and further substantiates the relevant project work specifically described on the SF 330. Additional information should not exceed Twenty (20) double-sided pages. It is recommended that submissions be spiral bound and assembled in a manner that chronologically corresponds and addresses the Technical Evaluation Criteria. Submissions received via e-mail or facsimile will NOT be accepted. Responses must be received by July 15, 2015 at 3:00 PM/EST. Note: Architect-Engineering (A-E) firms that were involved in the preparation of the preliminary planning for this project are not eligible to participate in the subsequent Design-Build (D-B) process. Contracting Office Address: Department of Veterans Affairs National Cemetery Administration Contracting Service 425 I Street NW, 5th Floor Washington, DC 20001 Place of Performance: Florida National Cemetery 6502 SW 102nd Avenue Bushnell, FL 33513 Point of Contact: Tiffany M. Thornton tiffany.thornton@va.gov

C--Petroleum Oil Lubricants (POL) AE Services, World Wide

Department of the Navy, Naval Facilities Engineering Command | Published March 13, 2015  -  Deadline April 16, 2015
cpvs

THERE IS NO RFP PACKAGE TO DOWNLOAD. ALL INFORMATION NEEDED TO SUBMIT FS-330 DOCUMENT IS CONTAINED HEREIN. SF 254S AND SF 255S WILL NOT BE CONSIDERED. INDEFINITE DELIVERY INDEFINITE QUANTITY contract for ARCHITECT-ENGINEERING (A/E) services for the Naval Facilities Engineering and Expeditionary Warfare Center, Port Hueneme, California. Two separate Multiple Award Contacts (MACs) will be awarded under this single solicitation: 1) A Small Business set aside for requirements within the United States and Outlying areas (Puerto Rico, Northern Mariana Islands, American Samoa, Guam, U.S. Virgin Islands, Baker Island, Howland Island, Jarvis Island, Johnson Atoll, Kingman Reef, Midway Island, Navassa Island, Palmyra Atoll, Wake Atoll) and 2) An unrestricted acquisition for all other requirements outside the United States and Outlying Areas. It is anticipated that both MACs will be Firm Fixed Price Contracts. The North American industry Classification System (NAICS) code is the procurement 541330, and the annual size standard is $15,000,000. The size standard applies to only the small business action. This synopsis provides engineering and design services for Petroleum, Oil and Lubricants (POL) systems, and supporting facilities at various locations, worldwide. The Government anticipates award of two separate MACs consisting of three to five (3-5) contracts on each MAC. The duration of the contract(s) will be for one year from the date of an initial contract award (Base Year) with four (4) additional one-year option periods. The aggregate value of all Task Orders issued under the contract(s) resulting from this solicitation shall not exceed $70,000,000 for the Small Business Set aside MAC and $29,000,000 for the unrestricted MAC for a total of $99,000,000 (not per awardee) over the base year and all option periods for both MACs. The options may be exercised within the time frame specified in the resultant contract at the sole discretion of the Government. Estimated start date is August 2015. The minimum guarantee of $5,000 (per awardee) for the base period will be satisfied by the award of an initial Task Order per awardee. Multiple Task Orders may be awarded with similar delivery schedules requiring the selected firm(s) to provide services with overlapping work/delivery dates. Individual Task Orders are expected to range, on average, between $50,000 to $800,000 for the Small Business Set aside for requirements within the United States and Outlying areas and between $50,000 to $850,000 for the unrestricted MAC for all other requirements. This project provides engineering and design services for POL systems, and supporting facilities at various locations, worldwide. The design and engineering services will require expertise in architectural, mechanical, electrical, civil, structural, and environmental disciplines as it pertains to Department of Defense (DoD) POL systems. POL systems include all components of Receipt, Storage, Transfer and Issue equipment. Support facilities include all utilities that supply POL systems and structures, building and associated equipment that directly support POL System operation. The required A/E services for POL systems and facilities include but are not limited to the following: a) Preparation of Design-Build (DB) Request for Proposals (RFP) and cost estimates. b) Fully designed plans and specifications. c) Preparation of Report, Evaluations, Studies or analyses on any or all components of a POL system and its support facilities, and related site visits/investigations (e.g. corrosion/cathodic protection analysis, environmental studies in support of permit applications to federal, state and local agencies, project brochure development, topographic surveying, soil boring). d) Integrity assessments that includes American Petroleum Institute (API) inspection and/or testing of storage tanks, pipelines, pressure vessels, pumps, control systems, all associated fuel equipment and electrical systems supplying POL equipment and ancillary support facilities. e) Spill management that includes, identification and abatement/removal of contaminated soil and other hazardous materials. f) Cost estimates, Life Cycle Cost Analysis, Economic Analysis, and Business Case Analysis. g) DD Form 1391 or similar planning and programming documents. h) Post Construction Award Services (PCAS) such as submittal reviews, construction inspection, Operations and Maintenance Support Information (OMSI) preparation, engineering consultations and Title II (on-site Quality Assurance (QA) oversight) services. i) POL related Support Services (i.e. work performed by Program/Principal Managers, Design Managers, Project Managers and Construction Managers such as coordination of various technical disciples, permitting, phasing of work in occupied and unoccupied facilities and disruption of both utilities and operations of the site and building occupants during construction, scheduling, quality assurance, construction inspection, constructability reviews). The following information is provided for information purposes and is not a representation or forecast of future work. For the Small Business MAC, recent task orders have previously been performed in: California, Virginia, Florida, Washington, Texas, Georgia, Louisiana, Maryland, Nevada, North Carolina, Hawaii, Guam, and Wake Island. For the unrestricted MAC, recent task orders have been performed in Japan, South Korea, Kwajalein, Diego Garcia, Germany, Spain, Djibouti, and Guantanamo Bay, Cuba. Participants in the unrestricted MAC should anticipate having to comply with various Status of Forces Agreements that will be defined on each task order. If small business firms desire to be considered for the unrestricted MAC, a separate SF-330 may be submitted. Selection criteria will include, in descending order of importance, the following: (1) Specialized Experience. Provide a description of similar, recent Department of Defense POL projects (maximum of ten (10), i.e. Pipeline / Tank Inspection, Tank design, POL fuel system design, Title II activities as they relate to POL), with clients, for which team members provided a significant technical contribution. Work on these projects must have been done in the last five (5) years. In matrix form, identify which team members worked on the projects described above. Provide an explanation of your management approach, an organizational chart showing inter-relationship of management and design team components, and specific quality control process. Describe your quality control program/process; identify who has the responsibility for implementation of the program, and discuss how you instill a culture of quality throughout the team. (2) Professional Qualifications. Submit a matrix for proposed design team(s), including alternates, that contains the following data about the member’s assignment: team member’s name, firm name, level and area of concentration (i.e., Bachelors of Science (BS) mechanical engineering), location of professional registration including license number, states of professional registration, number of year professional experience, and number of years with current firm. Identify any American Welding Society (AWS), National Association of Corrosion (NACE), American Society for Nondestructive Testing (ASNT), American Petroleum Institute (API), and any other applicable certification of all team members as it relates to this project requirement. Identify any prior/active security clearances of all team members. For project managers and team leaders, identify the number of teams (design, consultants, and joint venture partners) they have managed over the past five years. (3) Capacity. Demonstrate the ability of the firm to execute multiple, simultaneous projects within a reasonable, minimum time limit as demonstrated by the team’s history of successfully completing such projects in compliance with performance schedules and providing timely construction support. Discuss how surge workload would be handled. (4) Provide Past Performance information on contracts that the firm has completed for Government agencies and/or private industry with respect to cost control, quality of work, and compliance with performance schedules. Demonstrated long-term Government or private business relationships, repeat business on related efforts, and construction support are valued. Provide a listing of performance ratings and letters of commendation from both private and DoD clients (designate your role; prime, consultant, or joint venture partner). Ratings should be no later than five (5) years. (5) Small Business and Small Disadvantaged Business Subcontracting Plan. Firms will be evaluated on the extent to which they identify and commit to the published Small Business Subcontracting Program. The Secretary of the Navy has assigned the Naval Facilities Engineering Command goals expressed in terms of percentages of total planned subcontracting dollars for utilization of small business (SB) of 66.8%. Included in the SB goals are targets for: Small Disadvantaged Business (SDB) – 17.27%, Women Owned Small Business (WOSB) – 15.3%, Service Disabled Veteran Owned Small Business (SDVOSB) – 3.03%, and HUBZone Small Business – 8.94%. Large business firms shall submit their Navy wide, Summary Subcontract Report with their SF 330. The slated firms will be required to provide a preliminary subcontracting plan (support for small business subcontracting) as part of the interview. Note: If large business is selected for award, an acceptable subcontracting plan that reflects a minimum of subcontracting goals stated above must be submitted before price negotiations begin for contract award. (6) Location – Describe firm’s location and demonstrated knowledge of the general geographical areas in which projects could be located. Indicate firm’s location of main offices, branch offices, and sub-consultants offices. Describe and illustrate the team’s knowledge and availability to meet project requirements on a worldwide basis. (7) Volume of Work previously awarded to the firm by the Department of Defense within the past twelve months. Indicate in Block H the total dollar value of contracts awarded and their projected completion schedules. (8) Sustainable Design Requirement- Firms will be evaluated in terms of their knowledge and demonstrated experience in applying sustainability concepts through an integrated design approach and designing in accordance with the U. S. Green Building Council, Leadership in Energy and Environmental Design (LEED) Green Building Rating System. Identify examples indicating design team (including consultants) experience and concepts employed for sustainability of DOD POL Systems. Sustainable design elements as pertaining to DOD Fuel systems include: 1) Minimize or elimination of toxic and harmful substances in facilities and the surrounding environments; 2) Facility maintenance and operational practices that reduce or eliminate harmful effects on people and natural environment., and 3) Efficiency in resource, and selection of materials and products appropriate for the environment. Firms, their subsidiaries, or affiliates, which design or prepare specifications for a construction or service contract, cannot provide the actual construction or service on a subsequent contract. SF 330 Part I is limited to 50 pages. SF 330, Part II is limited to one page for the prime contractor and one page for each subcontractor. Part II, block 5(b), Small Business Status – do not leave this blank. Four hard copies and one electronic copy of the submittal package are to be received in this office no later than 4:00 p.m., Pacific Time on April 16, 2015. Submittals received after this date and time will not be considered. Telegraphic and facsimile of SF 330s will not be accepted. Electronic mail is not an acceptable media. Offerors shall ensure that proposal disks are virus free, and free of password protection. Thumb or flash drives are not acceptable. Site visits will not be arranged during the submittal period. In accordance with FAR 52.204-7, all firms must be registered with the System for Award Management (SAM) prior to award of any contract. Responses are to be submitted to Naval Facilities Engineering and Expeditionary Warfare Center, Port Hueneme, California, 1100 23rd Ave, Port Hueneme, CA 93043-4347, Attn: Keith Garascia. Outside corner of mailing envelope shall be labeled as follows: N3943015POLAE - A/E Services.

Sole Source Fountainhead Console Spare Parts

National Aeronautics and Space Administration, Kennedy Space Center | Published June 16, 2016  -  Deadline June 22, 2016
cpvs

This solicitation is a sole source acquisition notice for commercial items prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. Kennedy Space Center (KSC) has a requirement to negotiate with Fountainhead Controlrooms, Inc. for the acquisition of spare components for the Gesab consoles installed in the Launch Service Program's Launch Vehicle Data Centers. This notice is being issued as a Sole Source Request for Quotation to Fountainhead Control Rooms, Inc., Duluth GA for the following purchase:Spare parts that are vendor proprietary for the existing consoles installed in the Launch Vehicle Data Centers at CCAFS Hangar AE and Vandenberg AFB Building 836. The spare parts being requisitioned have no substitutes that work with the existing consoles. Fountainhead Controlrooms currently is the sole US representative for the console manufacturer, Gesab LLC. The Government currently uses Fountainhead consoles and intends to maintain spare parts for consoles. Using another manufacture's console parts will add significant costs for additional spares and additional cost for training for installation and maintaining of the consoles. The monetary costs associated with purchasing another manufacture's parts and maintaining spares is greater than the actual cost of the required spare parts. The introduction of another brand of desk equipment would require excessive cost in maintaining the existing consoles. Any hardware added to the existing desk system has to be compatible in order for the consoles to be viable. To be consistent in architecture and infrastructure, the government requires Fountainhead products to maintain consistency and compatibility in an already designed console interface.Delivery of the spare components for the Gesab consoles are due no later than October 14, 2016. Quotation must reflect that the delivery date and period of performance can be met. Evaluation criteria are technical acceptability and overall lowest cost. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offers for the items(s) described above are due by June 22, 2016, 10:00 AM (EST) via email to troy.m.deal@nasa.gov . Interested organizations may submit their written quotation or written detailed capabilities and qualifications to perform the effort in writing to the identified point of contact no later than 10:00 AM EST on June 22, 2016. Such detailed capabilities and qualifications must demonstrate in writing the ability to meet this requirement and will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government. Questions must be received in writing (email) by 12:00 PM EST on June 20, 2016, to the identified point of contact. All responsible sources may submit an offer which shall be considered by the agency. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. An ombudsman has been appointed The provisions and clauses in the RFQ are those in effect through FAC 2005-88. The NAICS Code and the small business size standard for this procurement are 337214, $500,000,000 respectively. The offeror shall state in their offer their size status for this procurement. The DPAS rating for this procurement is DO-C9. Offers must include solicitation number, FOB destination to KSC, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors must include completed copies of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items, with their offer. These representations and certifications will be incorporated by reference in any resultant contract.Prospective offerors may notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor this Internet (FedBizOpps) site for the release of solicitation amendments (if any). Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. Offerors shall provide the information required by FAR 52.212-1 (Apr 2014), Instructions to Offerors-Commercial, which is incorporated by reference. In accordance with FAR 52.212-1, the Contractor shall be registered within the Sam.gov database. The Contractor may register via the Internet at URL: https://www.sam.gov/portal/public/SAM/ 52.247-34 F.o.b. Destination. (NOV 1991) 1852.215-84 Ombudsman. (NOV 2011) ALTERNATE 1 (JUN 2000) 1852.225-70 Export Licenses. (FEB 2000) 1852.237-73 Release of Sensitive Information. (JUN 2005) FAR 52.212-4 (May, 2015), Contract Terms and Conditions-Commercial Items is applicable. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items. (MAR 2016) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. 7104(g)). 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (OCT 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (OCT 2015) (31 U.S.C. 6101 note). 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). 52.219-28, Post Award Small Business Program Representation (JUL 2013) (15 U.S.C. 632(a)(2)). 52.222-3, Convict Labor (JUN 2003) (E.O. 11755). 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB 2016) (E.O. 13126). 52.222-21, Prohibition of Segregated Facilities (Apr 2015). 52.222-22 Previous Contracts and Compliance Reports (FEB 1999)52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). (31) 52.222-36, Affirmative Action for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011). (E.O. 13513). [X](40)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43). (42) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). (End of clause) 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): [http://www.acquisition.gov/far/ ]
  • 1