Public tenders for interior-design in United States

Find all Architecture tenders in the world.
Finding business opportunities has never been easier.

Results for architecture. Make a new search!

FURNITURE MAINTENANCE SUPPORT AND INTERIOR DESIGN SERVICES

Defense Logistics Agency, DLA Acquisition Locations | Published June 25, 2015  -  Deadline July 10, 2015
cpvs

PRE-SOLICITATION FOR FURNITURE MAINTENANCE SUPPORT AND INTERIOR DESIGN SERVICES.

71--Interior Design

Department of Veterans Affairs, Long Beach VANLO | Published September 15, 2014  -  Deadline September 18, 2014
cpvs

Knoll Product as Follows: Phase 2 add a on product 5 knoll dividends L shape workstations, Task and guest seating, lateral files and storage cabinets. See Specs and drawings for detail. Receive knoll product is one phase to job site during regular business hours when space is ready total man hours over time receives and install 144 hours base $________________, 8 men, Installation time 4-5 days, clean and remove all trans and complete final walk through with project manager

72--Wall Art, Interior Design and Installation

Department of the Navy, United States Marine Corps | Published January 28, 2008  -  Deadline February 4, 2008
cpvs

Wall Art, Interior Design and Installation

Z--Interior Design Services

Department of the Army, Army Contracting Command, MICC | Published August 12, 2013  -  Deadline August 21, 2013
cpvs

The Mission and Installation Contracting Command, Fort Bragg, intends to issue a solicitation for interior design services not later than (NLT) on or about 13 August 2013. The Contractor will be responsible for performing interior design services in support of moving into a new headquarters building. The purpose of this contract will be to provide a service in a timely and cost effective manner to meet this requirement. The contract type will be a firm fixed-price contract beginning NLT 23 August 2013. NAICS code is 541410: Interior Design Services. The size standard is $7M. The contract will be set-aside for a Woman Owned Small Business. The solicitation can be viewed at https://acquisition.army.mil/asfi/ on or about 13 August 2013 under solicitation number W91247-13-T-0451. Once the solicitation is posted, it is the responsibility of the interested parties to review this site frequently for any updates/amendments to any and all documents. Offers received in response to the solicitation will be evaluated in accordance with procedures outlined in Federal Acquisition Regulation (FAR) Part 13.106-2(a)( 2). Award will be made on the basis of the lowest evaluated price of offers meeting or exceeding the acceptability standards. All responsible sources may submit a quote which shall be considered by this agency. Offers are due on or about 21 August 2013 and award is anticipated before 23 August 2013. The point of contact is Mark Tyson, Contract Specialist, email at markese.a.tyson2.civ@mail.mil.

C--Interior Design, A-E IDIQ, Small Business Set-Aside, NAVFAC Southwest, San Diego, CA

Department of the Navy, Naval Facilities Engineering Command | Published October 18, 2016  -  Deadline November 22, 2016
cpvs

DESCRIPTION: ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM (SF) 330, ARCHITECT ENGINEER QUALIFICATIONS, IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSAL (RFP) PACKAGE TO DOWNLOAD. THIS IS A TOTAL SMALL BUSINESS SET-ASIDE PROCUREMENT. A market research study was conducted by NAVFAC Southwest that included an assessment of relevant qualifications and capabilities of potentially qualified firms. Upon review of the market research, the U.S. Small Business Administration (SBA) in San Diego determined that a Small Business Set-Aside procurement is appropriate. The NAVFAC SW small business office concurs with the SBA determination. Architect-Engineer (A-E) services are required for a firm fixed-price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Interior Design Services. Projects under this contract will occur at various military installations located in the NAVFAC Southwest (SW) Area of Responsibility (AOR) (California, Arizona, Nevada, Colorado, New Mexico, and Utah) and the NAVFAC Pacific AOR (Hawaii, Japan, Guam), but may be also available to the NAVFAC (AOR) as approved by the NAVFAC SW Chief of Contracting Office (CCO). Travel will be required to the project sites. The Offeror/Contractor must demonstrate adequate in-house staffing capability to self-perform at least 50 percent of the cost of the contract as required by FAR Clause 52.219-14(b) (1) Limitation on Subcontracting. A-E Design and Engineering Services shall mainly provide for, but not be limited to, INTERIOR DESIGN related services. All A-E services will be in accordance with the scope of this contract, Industry Design Codes and Standards and Department of Defense Unified Facilities Criteria (UFC) such as Antiterrorism, Energy and Sustainable Design, Safety and Health Requirements. For this contract, the lead discipline shall be a certified Interior Designer. Acceptable certifications are a National Council for Interior Design Qualification (NCIDQ) certification or a state and/or jurisdiction Interior Design Certification, Registration, or License. The number of design task orders per fiscal year may vary and may involve surges of multiple projects with overlapping delivery dates. A-E services required: The work will primarily include preparing Comprehensive Interior Design (CID) for various types of facilities. CID includes Structural Interior Design (SID) and Furniture, Fixtures and Equipment (FF and E) Interior Design. SID includes selection and coordination of interior finish materials that are integral to or attached to the building structure. FF and E interior design includes design, selection, specification, color coordination, and procurement documentation of the required items. SID packages will typically include furniture floor plans, finish schedules, and any supporting interior elevations, details, or plans necessary to communicate the building finish design and build out. FF and E packages will typically include placement plans, ordering and finish information on all freestanding furnishings and accessories, cost estimates, and best value determinations. Additional services may include the following: preparation of the interior design portion of a design-build Request for Proposal (RFP) package, including developing the FF and E requirements and budget for the project; verification of equipment and finishes during building construction; consultation during FF and E procurement, delivery, and installation; supervision of furniture assembly and placement; developing standards for FF and E for a program or group of projects; and other related consultation. Preparation of all interior design deliverables shall be in accordance with UFC 3-120-10, Interior Design. FF and E specifications shall be based on Naval Supply Systems Command (NAVSUP) Blanket Purchase Agreements (BPA), General Services Administration (GSA) schedules, and other Federal contracts. The types of buildings/facilities may include, but are not limited to, administration buildings, academic facilities, maintenance facilities, hangars, industrial/warehouse, bachelor enlisted/officer quarters, recreational facilities, dining facilities, medical facilities, laboratories, and consolidated clubs. The maximum contract value may not exceed $5,000,000 aggregate total. The minimum guarantee for the contract is $5,000. The minimum guarantee for the entire contract term (including option years) will be satisfied by the award of the initial task order. The minimum value of individual task orders executed under this contract is $5,000. The maximum value of individual task orders executed under this contract is $400,000. There will be no dollar limit per year. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Contract term is for a one-year base period with four option periods. Each performance period will run 365 (366 for leap year) calendar days. The hourly rates will be negotiated for each performance period. The Government may exercise the option period unilaterally. Per NFAS 17.208-100(c) (1), options for post-award services may be negotiated on individual task orders for unilateral exercise. The estimated start date is December 2016. The NAICS Code for this procurement is 541410 (Interior Design Services) and the annual small business size standard is $7.5 Million. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. The contractor is not guaranteed work in excess of the minimum guarantee. Firms that provided Architect-Engineer services for a task order issued under the resulting contract are prohibited from participating on the subsequent construction contract. This limitation also applies to subsidiaries/affiliates of the firm. Firms or personnel shall not be affiliated with any furniture dealership, vendor, or manufacturer. SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS: Selection of Architects and Engineers, formerly the Brooks Act (PL 92-582) and Federal Acquisition Regulations (FAR) Part 36.6 selection procedures apply. The evaluation and selection will be based on the following criteria: Criterion 1, Professional Qualifications; Criterion 2, Specialized Experience and Technical Competence; Criterion 3, Capacity; Criterion 4, Past Performance; Criterion 5, Location and Knowledge of the Locality; Criterion 6, Quality Control; and Criterion 7, Volume of Work. Submitted SF330s (Architect-Engineer Qualifications) and related information will be evaluated to determine the most highly qualified firm based on criteria responses. Criteria 1 and 2 are considered most important and of equal importance to each other; Criteria 3, 4, 5, and 6 are of lesser importance and listed in descending order of importance; and Criterion 7 is of lesser importance and will be used as a tiebreaker among firms considered technically equal. Evaluation of past performance and experience may include information provided by the firm, customer inquiries, Government databases, and publicly available sources. Failure to provide requested data, accessible points of contact, or valid phone numbers may result in a firm being considered less favorably in the evaluation. In evaluating an Offeror’s capability, the Government will consider how well the offeror complied with these instructions. All projects provided in the SF330 (Architect-Engineer Qualifications) shall have been completed by the office/branch/individual team member actually performing the work under this contract. Projects not performed by the office/branch/individual team member will be excluded from evaluation consideration. Submission Requirements: The SF330, Part 1 submission is limited to thirty (30), 8.5”x11” pages (see definition). Information submitted beyond the stated page limitation, unless otherwise excepted, will not be considered in the evaluation. Submit one (1) original and three (3) copies of SF330 (Parts 1 and 2), addressing the selection criteria information below. Requested items not counted as part of the 30-page limitation are as noted herein. Also submit one electronic copy of the complete SF330 on CD (Adobe Acrobat .PDF format, compiled into one file). SF330, Part 1, Sections B and C: In Block 5, in addition to the name of the firm, provide the firm’s Data Universal Numbering System (DUNS) number issued by Dun and Bradstreet Information Services. In Block 9, in addition to the name of the firm, provide the DUNS number of each proposed team member. SF330, Part 1, Section D: Organization Chart: In addition to requirements stated in the SF330 Instructions, identify on the submitted organization chart the relationships and lines of authority of the proposed team members, including key subcontractors, including the following: Name Firm employed with Job Title/Role Licensure, certification, and or accreditation Permanent geographic location of individual Note: All individuals listed on the organization chart are not required to have a resume in Section E, such as administrative positions. This chart shall not be counted as part of the 30-page limitation. This chart must be affixed to the submittal to avoid separation in handling. SF330, Part 1, Section E, Resumes of Key Personnel, CRITERION 1, PROFESSIONAL QUALIFICATIONS: The evaluation will consider the professional qualifications of proposed key personnel (see definition at end of notice) in providing relevant A-E interior design services for facility types identified for this contract. Include the geographic office location of the individual on the resume. The designated Program Manager (see definition) shall be a certified Interior Designer with a minimum of five years of relevant experience, and be on staff of the prime A-E firm. . In addition to the Program Manager, key personnel shall include a minimum of two interior designers on the proposed team; at least one shall be certified Interior Designer. Acceptable certifications are a National Council for Interior Design Qualification (NCIDQ) certification or a state and/or jurisdiction Interior Design Certification, Registration, or License. Key personnel experience in performing CID for NAVFAC projects may be considered more favorably. Key personnel shall be proficient in the latest versions of AutoCAD and/or Revit. Key personnel shall not be affiliated with any furniture dealership, vendor, or manufacturer. Key personnel with accreditation as a LEED Accredited Professional in Interior Design + Construction (LEED AP ID+C) may receive more consideration in the evaluation. Submission Requirements: Provide brief resumes for the proposed Program Manager and the key personnel who will specifically perform the relevant interior design services for facility types identified for this contract. Non-relevant information will not be considered. Resumes of personnel performing other than interior design are not required and will not be considered. For each individual, indicate highest level of education achieved, number of years engaged in the discipline, and applicable certification/registration/license. Submit a copy of the applicable current certificate (i.e. NCIDQ or LEED AP ID+C). Certificate copies will not be counted in the 30-page limitation. Each resume shall include a maximum of five (5) specific recently completed projects that best demonstrate the individual’s qualifications in performing the specific interior design services listed for this contract (i.e. CID, SID, FF and E, design-build requirements, supervision of installation, etc.). Submit only projects in which the individual performed a significant role. Provide the month and year of completion of professional services for each project. Submit a brief description of the project within SF330, Section E, Block 19. For each project describe: 1) Facility type; 2) Role and responsibilities of the key personnel; and 3) specific interior design services performed by the individual that are relevant to the A-E services required by this contract. Identifying only the individual’s job title will not provide sufficient information to determine their specific experience as it relates to services to be performed under this contract. Projects not meeting these requirements will not be considered. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a stand-alone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. For purposes of this evaluation, “recent” is defined as professional services completed after November 23 2009 and complete as of the SF330 due date. “Completion” is defined as the date that the final interior design services were completed. Projects not meeting these requirements will not be considered to demonstrate recent experience. SF330, Part 1, Section F, Example Projects, CRITERION 2, SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: The evaluation will consider specialized experience and technical competence of the proposed team relative to interior design services for facility types identified for this contract. Projects completed by the prime A-E firm identified in Part I may be given more consideration in the evaluation process than projects of proposed subcontractors. Firms that demonstrate relevant NAVFAC experience in preparation of Comprehensive Interior Design (CID), including Structural Interior Design (SID) and Furniture, Fixtures, and Equipment (FF and E) packages. Submission Requirements: For the proposed team, submit a maximum of ten (10) recently completed projects (see definitions) that best demonstrate the overall team experience in performing the A-E services for project types identified for this contract. Provide the month and year of completion of professional services for each project. Projects shall have been performed by the office(s)/branch(es) identified in SF330, Part 1, Section C. To enable verification, firms should include the DUNS number along with each firm named in the SF330 Part I, Section F, Block 25. If the project is a Department of Defense/Government contract, include the complete contract number, including the task order number if applicable. In SF330, Part 1, Section F, Block 24, submit a description of the project, including: 1) Type of project and its relevance to the scope of this contract; 2) Specific interior design services performed by the firm (i.e. CID, SID, FF and E, design-build requirements, supervision of installation, etc.); 3) Relevant sustainable features (see definition) incorporated in the project (if none or if not applicable to the project, affirmatively state so); and 4) A-E fee for the interior design portion of the project. Firms with multiple offices shall indicate which office(s)/branch(es) performed the A-E services. Each project may include an additional page with photograph(s) of the project interior design; the photograph pages will not count in the 30-page limitation. For submittal purposes, a task order on an IDIQ contract is considered a project (see definitions), as is a stand-alone contract award. Do not list an IDIQ contract as an example of a completed project. Instead, list relevant completed task orders or stand-alone contract awards. Examples of project work submitted that do not conform to this requirement will not be evaluated. For purposes of this evaluation, “recent” is defined as professional services completed after September 2009 and complete as of the SF330 due date. “Completion” is defined as the date that the final interior design services were completed. Projects not meeting these requirements will not be considered to demonstrate recent experience. If the proposed team is a joint venture (JV), submit information for relevant projects completed by the JV entity. If the JV does not have shared experience, projects may be submitted for each of the JV partners. In any case, do not exceed the ten (10) project limitation. In cases where the submitted project was performed by a JV, but all JV partners for that project are not on the team identified in Part I, Section C, specifically describe the relevant work performed by the JV partner(s) proposed for this contract. In all cases, clearly describe the specific relevant interior design work self-performed by the proposing firm and the firm’s roles and responsibilities on the project; do not include work that is not attributable to the proposing firm. If the project description does not clearly delineate the work performed by the entity/entities teaming on this contract, the project may not be considered. SF330, Part 1, Section G, Key Personnel Participation in Example Projects: Submit in accordance with the SF330 Instructions. From the total projects listed in Section F, provide a maximum of ten (10) projects. SF330, Part 1, Section H; Additional Information requested by Agency: Address the remaining Criteria 3 through 7; additional sheets may be used up to the 30 page limitation for Part 1, if required. See submission requirements. Clearly identify the Criterion number and title. CRITERION 3, CAPACITY: The evaluation will consider the Offeror’s capacity to accomplish the work in the required time and the capability to self-perform at least 50% of the contract value with in-house staffing. Submission Requirements: Submit a narrative that demonstrates the firm’s capacity to accomplish work in the required time frames, addressing the following: 1) Present workload and capability to integrate work under this contract with other work; 2) Methodology the prime A-E firm will use to execute a minimum of 50% of the contract value with in-house personnel; 3) Capacity to accomplish multiple task orders simultaneously with overlapping dates; 4) Ability of the firm to provide qualified backup staffing for key personnel to ensure continuity of service; and 5) Strategy to meet surges in unexpected workload demand. CRITERION 4, PAST PERFORMANCE: The evaluation will consider the Offeror’s past performance on relevant Government and/or commercial projects regarding quality of work, cost control, compliance with performance schedules, and customer satisfaction, with emphasis on example projects presented in Section F. The evaluation will be based on past performance assessments and other available past performance information. Points of contact provided in the proposal may be contacted. Where there is no record of past performance, the proposal will be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation. Submission Requirements: For projects provided as experience in Section F, list and provide copies of any applicable design awards received (copies are not counted in the 30-page limitation). Clearly indicate to which Section F project the award applies; otherwise the information may not be considered. Submit an A-E Contractor Appraisal Support System (ACASS), Contractor Performance Assessment Report System (CPARS), or a Past Performance Questionnaire (PPQ) evaluation for each project submitted under Criterion 2. If a completed ACASS/CPARS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS/CPARS evaluation, the PPQ included with this notice is provided for the Offeror or its team members to submit to the client for each project. If a PPQ is submitted, but an official ACASS/CPARS evaluation is found for that project in government databases, the official evaluation will take precedence. If an ACASS/CPARS evaluation is not available, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF330. If the A-E is unable to obtain a completed PPQ from a client for a project before the response date set forth in this notice, the A-E should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and client information for the respective projects. A-Es should follow-up with clients/references to ensure timely submittal of questionnaires. If the client requests, questionnaires may be submitted directly to the Governments point of contact, Naval Facilities Engineering Command Southwest, Code RAQ20.EP, Attn: Elliott Penetrante, via email at elliott.penetrante@navy.mil, prior to the response date. A-Es shall not incorporate by reference into their response ACASS/CPARS or PPQ evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted ACASS/CPARS and PPQ evaluations will not be counted as part of the 30 page limitation and shall be attached to the SF330, behind the SF330 Part II document(s). CRITERION 5, LOCATION AND KNOWLEDGE OF THE LOCALITY: The evaluation will consider the team’s location, demonstrated knowledge of and project experience within the geographic areas where projects are anticipated for this contract. Due to the extensive coordination required with NAVFAC SW staff, prime A-E firms with a local office within 90 miles of NAVFAC SW headquarters in San Diego may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative that demonstrates the team’s knowledge of and project experience within the geographic locations for anticipated projects on this contract. The narrative shall address the following: 1) Location of the prime A-E’s main office and any branch offices and subcontractor offices that will be utilized for this contract; 2) Description of the team’s knowledge of, and project experience within, the targeted geographic areas; and 3) Description of team’s availability and ability to ensure timely response to requests for onsite support at Government installations throughout the NAVFAC PAC and SW AORs. CRITERION 6, QUALITY CONTROL: The evaluation will consider the Offeror’s Design Quality Control (DQC) program for ensuring technical accuracy and coordination of the A-E services. Firms that demonstrate a QC process that will minimize the government’s quality assurance (QA) effort in reviewing the A-E’s work product may be considered more favorably in the evaluation. Submission Requirements: Submit a narrative that describes the DQC program that the prime A-E firm uses to ensure technical integrity and accuracy of provided services. Identify the key personnel responsible for quality control. The narrative shall address the following: 1) The QC program used by the prime A-E firm to ensure technical accuracy, effective coordination, and consistency of the A-E’s work product across the team (including subcontractors); 2) Process used for checking documents for coordination errors, omissions, conflicts, and discrepancies in the design/report documents; tracking changes and incorporating review comments; and 3) If multiple offices (prime and subcontractor) are included on the team, identify the office responsible for managing and coordinating the QC program and discuss the prime A-E’s methodology to ensure effective QC and communication between offices. CRITERION 7, VOLUME OF WORK: The evaluation will consider the volume of DoD work awarded to the prime A-E in the past 12 months with the objective of equitably distributing contracts among A-E firms, including minority-owned firms and firms without prior DoD contracts. Submission Requirements: State the dollar amount of work previously awarded to the firm identified in the SF330 as the Prime by DOD in the past 12 months. Joint Ventures (JV) should list awards to the JV entity and separately list awards to each individual JV member for the time period. Do not include work performed as a Subcontractor. SELECTION INTERVIEW REQUIREMENTS: Personal interviews may be scheduled for firms slated as most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in their SF330 submittal. Elaborate presentations are not desired. Note that joint ventures (JV) slated for interviews will be required to provide a copy of their JV Agreement prior to the interview. ADDITIONAL INFORMATION: All information must be included in the submitted SF 330 package (cover letter, attachments, and excess information beyond the 30-page limit, unless otherwise excepted, will not be considered in the evaluation). System for Award Management (SAM) Database: In accordance with FAR 52.204-7, System for Award Management Registration, ensure your firm has an active SAM entity record. SAM is a Federal Government owned and operated free web site that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). SAM is the primary Government repository for current and prospective federal awardee information. Please complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code and DUNS or DUNS+4. Registration instructions and information can be accessed from the SAM home page at: https://www.sam.gov. A-E firms meeting the requirements described in this announcement are invited to submit a completed SF330 package per the submission requirements to the office shown below. The submittal package (original, plus 3 copies and 1 CD) shall be received in this office (NAVFAC Southwest, Attn: Elliott Penetrante, Code RAQ20.EP, 1220 Pacific Highway, San Diego, CA 92132) no later than, 2:00 P.M. Pacific Time on November 22, 2016. Facsimile and emailed SF330 packages will not be accepted. Submittals received after this date and time will not be considered. Read the following information carefully. An Offeror risks the late receipt and rejection of their SF330 package when delivery is delayed until the last few minutes before the deadline. Offerors intending to deliver the SF330 package in-person are cautioned that the NAVFAC Southwest facility is located in downtown San Diego. It is recommended that the Offeror allow for delays driving through downtown San Diego caused by traffic (both freeway and downtown), train/trolley crossings, parking at the pay lots/meters near the facility, and gaining access to a secure Government facility. No parking or offloading of SF330s is available at the Government facility. SF330s shall be delivered to the mailroom in Building 128 and reasonable time shall be allowed for mailroom personnel to receive and time stamp the SF330. The stamp time is determined by the NAVFAC Southwest facility mailroom time stamp device only, not by any other time keeping device that the Offeror may use or own. Immediately upon proposal delivery, the Offeror shall leave the premises of the Government facility. An Offeror that does not leave the premises may be requested to leave or be escorted off the premises. THIS IS NOT A REQUEST FOR PROPOSAL. ALL INFORMATION NEEDED TO SUBMIT SF330 DOCUMENTS IS CONTAINED HEREIN. NO SOLICITATION PACKAGE, TECHNICAL INFORMATION, OR BIDDER/PLAN HOLDER LIST WILL BE ISSUED. It is the offeror’s responsibility to check the NAVFAC electronic solicitation website NECO (Navy Electronic Commerce Online) at: https://www.neco.navy.mil for any revisions to this announcement or other notices. Plan-holder list is available via the NECO website and an Interested Vendors List is available via the FedBizOpps website, www.fbo.gov, under this solicitation number. Address inquiries via email: elliott.penetrante@navy.mil or via telephone: 619-532-2967. *** END OF ANNOUNCEMENT *** DEFINITIONS OF TERMS: SEE ATACHMENT SYNOPSIS DOCUMENT

Furniture Maintenance Support and Interior Design Services

Defense Logistics Agency, DLA Acquisition Locations | Published September 25, 2015  -  Deadline October 26, 2015
cpvs

Please refer to the attached. Thank you.

R--Interior Design Services Display and Hanging of Photographs and other Artwork

Department of the Navy, Naval Supply Systems Command | Published May 9, 2016  -  Deadline May 13, 2016
cpvs

The NAVSUP Fleet Logistics Center (FLC) Norfolk, Norfolk, VA 23511-3392 intends to negotiate a one hundred percent small business set-aside Firm Fixed price type contract for the installation of approximately 450 photographs and other variously sized pieces of artwork at JB Anacostia-Bolling, Washington, DC ,20032 Estimated period of performance is the date of award through 06 June 2016: The services will be acquired in accordance with the Federal Acquisition Regulation (FAR) Part 12 Acquisition of Commercial items and FAR Subpart 19.5, Set-Asides for Small Business. The North American Industry Classification System (NAICS) code for this acquisition is 541140, Interior Design Services, and the Size Standard is $7.5 Million dollars. A complete Request for Quote package will be available for downloading at the websites: http://www.neco.navy.mil or http://www.fedbizopps.gov on or about 9 May 2016. Potential contractors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available for download at the above sites; this office will no longer issue hard copy solicitations. By submitting an offer, the vendor is self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the offer. By submission of an offer, the contractor acknowledges the requirement that a prospective awardee must be registered in the Systems for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from this solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make a contractor ineligible for award. Contractors may obtain information on registration and annual confirmation requirements by calling 866-606-8220, or via the Internet at https://www.sam.gov/portal/public/SAM/. Please direct all questions regarding this requirement via e-mail to the POC identified in this synopsis. The NECO website has a submit button next to the solicitation number. DO NOT use the submit button on NECO to submit your proposal for the upcoming solicitation.

C--Interior Design Services at Albany VAMC

Department of Veterans Affairs, Albany VAMC | Published June 25, 2008  -  Deadline July 16, 2008
cpvs

The United States Department of Veterans Affairs, Veterans Integrated Service Network (VISN) 2, is looking to enter into negotiations with a qualified Architect/Engineer firm specializing in interior design services. This contract would be to perform interior design services at the Stratton VA Medical Center in Albany NY to bring areas within the multi-story hospital facility up to current aesthetic standards. Work includes identifying appropriate furniture, finishes and decorative items in addition to developing layouts in order to bring about a more homelike appearance in the Medical Center's long term care areas. The relevant NAICS code is 541310 (Architectural Services).Interested offerors are invited to submit complete qualification packets (SF 330) on or before July 16, 2008 to the following address:Jason V. White, Contract SpecialistSamuel S. Stratton VA Medical Center113 Holland Ave., Room C67Albany, NY 12208Electronic submissions will also be accepted at Jason.White@va.gov. Electronic submissions should reference the RFP number in the subject line of the email. Telephone inquiries will not be accepted.Offerors will be evaluated primarily based on the interior design experience/ability evident in the proposed team, supplied past performance, and educational/professional qualifications submitted. Other areas of expertise may be considered, but will carry significantly less weight. As such, submitted qualification packets should focus on this specific skill set in both qualification information and past performance examples. Supplemental photographs, sketches, layouts, or other visual aids that enhance the past performance examples given in the SF 330 will be considered.The VA will evaluate submitted proposals by forming an evaluation team following shortened selection procedures as described in FAR part 36 and the associated sections of the VAAR. In-person interviews/oral presentations are not anticipated, as the overall cost of this design is expected to fall below the Simplified Acquisition Threshold. Submission of pricing proposals and negotiations will be held with the highest-rated offeror after evaluations take place, and as such THIS POSTING IS NOT A REQUEST FOR PROPOSALS AND NO RFP IS AVAILABLE FOR DISTRIBUTION. The VA reserves the right to consider qualification packages already on file from prior projects this fiscal year alongside those received in direct response to this solicitation. Firms with qualification packages already on file may submit responses to this posting highlighting specific interior design experience, but are not required to.

Architectural Serivices for Space Planning & Interior Design

General Services Administration, Public Buildings Service (PBS) | Published June 26, 2009  -  Deadline July 28, 2009
cpvs

Architectural Services for Interior Design, Space Planning and Related Services for Region 7 which encompasses the States of Arkansas, Louisiana, New Mexico, Oklahoma and Texas. This acquisition is being procured in accordance with the Brooks Act as implemented in FAR Subpart 36.6. Firm will be selected for negotiation based on demonstrated competence and qualifications for required work. This procurement is unrestricted. This announcement is open to all businesses regardless of size as stated above. If a large business is selected for this proposed contract, it must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan. The current subcontracting goals are as follows: Small Business 37%, Small Disadvantaged Business 6%, Woman Owned Small Business 5%, HUBZone Small Business 3%, Veteran Owned Small Business 5%, Service Disabled Veteran Owned Small Business 3%. The subcontracting plan is not required with this submittal. To be eligible for contract award, a firm must be registered in the Central Contractor Registration at http://www.ccr.gov and have completed on-line Representations and Certifications at https://orca.bpn.gov. The North American Industrial Classification System Code applicable to this project is 541310, Architectural Services, which has a size standard of $4,500,000 in average annual receipts and corresponds to SIC Code 8712. The General Services Administration (GSA) proposes to award one indefinite delivery, indefinite quantity (IDIQ) contract for Space Planning and Related Services for Region 7. The contract area will be the States of Arkansas, Louisiana, New Mexico, Oklahoma and Texas. The A/E or Interior Design firm selected shall primarily provide, but will not be limited to: interior design, space planning, scope development, furniture layout, specification and estimates, move coordination, construction management and inspection, and estimating services for repair and alteration projects. Other services which may also be required include feasibility studies, problem analysis, design review, consulting design, quality control testing, historic structure reports, building evaluation reports and other architectural, engineering, and technical services. The work will be provided primarily by interior design and space planning disciplines but may also require architectural, mechanical, electrical, estimating, civil, structural, acoustical, historic preservationist, construction manager/inspector, and other disciplines with specialized experience. An IDIQ contract will be negotiated and awarded for one (1) one-year base period and four (4) one-year option periods. The minimum guaranteed contract amount is $1,000 for the base year only. There is no limit on the number of Task Orders or the size of a project; however, the total cumulative Task Orders amount shall not exceed $3 million for any one-year contract period. Projects, while there will be no limit on size, will generally involve Interior Design and Space Planning. Firms will be evaluated in terms of their professional qualifications necessary for satisfactory performance of required services, specialized experience and technical competence in the fields of energy conservation, pollution prevention, waste reduction, and the use of recovered materials. Selection criteria for this acquisition are listed below in descending order of importance: (1) Experience: Experience of the firm and consultants and personnel with regard to providing the types of services described above, and with regard to accomplishment of past projects including Interior Design and Space Planning Services. The SF330 shall include a matrix in Section G showing experience of the proposed lead designers on the projects listed in Section F of the SF330. Show any experience in sustainable design using LEED U.S. Green Building Council (USGBC). Projects should specifically address sustainable design aspects of each project. Projects completed before May 2004 will not be considered. (2) Furniture and Move Supervision and Coordination: Experience and capability of the firm and consultants with respect to complete management and inspection services for projects of the type described above. (3) Technical Ability: Professional qualifications, expertise and education level of individuals employed by the firm and consultants who will be directly involved in providing the above described services and their philosophy concerning interior design and space planning. (4) Management/Organization/Production/Quality Control: Producing a high quality design, maintaining good working relationships, working with interior design, space planning and renovation projects, meeting schedules, providing accurate cost estimates, and tracking and controlling costs. The evaluation will consider the availability of an adequate number of personnel in the following key disciplines: interior designer, architect, mechanical, electrical, civil, and structural. The evaluation will look at numbers listed in Part II of the SF330 to evaluate overall capacity of the team. Include a Part II for each firm that is part of the proposed team. The evaluation will consider the past history of the proposed team working together as a team, quality control coordination between disciplines and subcontractors and quality control procedures (type and timing of reviews). (5) Geographical Boundaries: Production office in the States of Arkansas, Louisiana, New Mexico, Oklahoma or Texas. The Government will not indemnify the firm against liability involving asbestos or other hazardous materials, that is, no clause holding the firm harmless will be included in the contract. A Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract will result from this solicitation, including profit, overhead and hourly rates for anticipated disciplines and for use in negotiating FFP task orders. A supplemental architect-engineer Lookup Table for pricing task orders for design projects with an estimated construction cost of up to $2,000,000 will be included in the contract. The Government will use the fixed price amount in the Lookup Table which will be a function of project size, type, and complexity. The Lookup Table will be provided to the A/E during initial contract negotiations. Firms, when responding to this announcement, should address their capability with regard to each of the evaluation factors listed above, as the top rated firms recommended for interview will be recommended solely on their written response to this announcement. For any firm who is selected - Replacement of, and/or substitution personnel and/or consultants during the award/negotiation stage of this contract may deem your proposal unacceptable. It is critical to propose personnel that have a high level of certainty that they will be available to perform the duties under this contract for the duration of the entire contract. Any and all changes made after the initial submission of your technical proposal will be re-evaluated for technical sufficiency and may negatively change the order of your technical rating as initially established. Submission of cost and or pricing data by the prime and all consultants, subcontractors and contract employees will be required. NOTE: SF 330, Part 1, Section E, "Resumes of Key Personnel Proposed for This Contract", Item 13, "Role in This Contract". In addition to the role in this contract, employees should be clearly identified as to whether they are direct employees or contract employees of the firm they are proposed under. All responsible Architectural or Engineering firms wishing to be considered must submit four (4) copies of completed Standard Form (SF) 330 and other pertinent information (see FAR 53.236-2(b)) which must be received NLT 2:00 PM CST on July 28, 2009. Faxed, facsimile, or emailed submittals will NOT be accepted or considered. All submittals must clearly identify the Solicitation number (see above) on the face of the envelope for identification purposes. Late submittals will be handled in accordance with FAR 52.215-1. Point of Contact Barbara Varley, Contracting Officer, (817) 978-7086, barbara.varley@gsa.gov. Isaac Karto, Contract Specialist, (817) 978-2198, Isaac.karto@gsa.gov

R--Interior Design Services

Department of the Navy, Naval Supply Systems Command | Published November 10, 2010  -  Deadline November 20, 2010
cpvs

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/). The RFQ number is N00189-11-T-Z034. This solicitation documents and incorporates provisions and clauses in effect through FAC 2001-24 and DFARS Change Notice 20040625. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm . The NAICS code is 541410. The Fleet and Industrial Supply Center Norfolk, Philadelphia Office requests responses from qualified sources capable of providing interior design services in accordance with the attached documents. Place of Performance is Washington, DC and period of performance is1 Dec 2010 – 30 Nov 2011. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. This announcement will close at 16:00 EST on 20 November 2010. Contact Jillian Swanson who can be reached at jillian.swanson@navy.mil. A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency. FAR 52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of past performance and price. The relative importance of the factors is as follows past performance more important than price. Central Contractor Registration (CCR). Quoters must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/ . All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number (if applicable), business size, and payment terms. Quotes over 10 pages in total will not be accepted by facsimile. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

C--Architect-Engineer Interior Design Services

Department of the Army, U.S. Army Corps of Engineers | Published June 24, 2014  -  Deadline July 25, 2014
cpvs

General Information Document Type: Pre-solicitation Notice Solicitation Number: W912DY-14-R-0036 Posted Date: June 24, 2014 Response Date: July 25, 2014 Classification Code: D, Architect and Engineering Services Contracting Office Address: US Army Corps of Engineers (USACE) Huntsville Center (CEHNC-CT-Preaward) 4820 University Square Huntsville AL 35816-1822 Description 1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR 36.6 and EP 715-1-7 Architect-Engineer Contracting in USACE. This acquisition is for worldwide Architect-Engineer (A-E) design services that are to be provided through the Engineering Directorate primarily for the Army Centralized Furnishings Program and the Integrated Medical Furniture (IMF) Program, and also for other programs that need these services. The Army Centralized Furnishings Program provides barracks, administrative and systems furniture, fixtures and equipment (FF&E), technical support for FF&E acquisition, and interior design services for various military facilities at various worldwide locations. The Architectural and Engineering support is for Comprehensive Interior Design (CID) services in support of the Army Centralized Furnishings Program. The Integrated Medical Furniture (IMF) Program provides integrated systems product solutions for furniture, fixtures and equipment (FF&E), technical support for FF&E acquisition, and interior design services for hospitals, clinics, pharmacies, laboratories, dental clinics, veterinarian clinics, administrative and logistical facilities, and research, training/classroom and medical warehouse functions for facilities within the Continental United States and worldwide. The Architectural and Engineering support is for Comprehensive Interior Design services in support of the IMF Program. The Architect-Engineer (A-E) design services provided will include the following capabilities: (a) Development of FF&E Request for Quotation (RFQ) technical documents by coordinating the user requirements with the design, existing conditions, and function of use. (b) Development of non-proprietary furniture item descriptions (FID) through knowledge of and experience with major furniture manufacturers. (c) Perform technical reviews of the manufacturer or the vendor FF&E quotes against the RFQ's FID and other technical direction of the RFQ. (d) Survey facilities to develop requirements for FF&E packages and CIDs. (e) Inspect complete installations assuring that furniture meets the FID and RFQ quantities in accordance with the contract award. (f) Develop and record findings of deficiencies and missing items. (g) Development of Comprehensive Interior Design (CID) packages to include Furniture, Fixtures and Equipment (FF&E) designs and Structural Interior Design (SID) packages in accordance with design instructions applicable to specific projects. (h) Develop finish presentation boards, if required, for specific design projects. (i) Coordinate support, as needed, from other disciplines to successfully configure a facility to adapt to new uses or to expand facility areas to meet mission requirements that require larger facility areas than what is provided. With either scenario, use a multi-discipline design support approach to perform these requirements. (j) Produce design drawings in a format fully compatible with the latest versions of AutoCAD and the capability to perform Building Information Modeling (BIM) utilizing Revit. In order to provide these services, the Huntsville Engineering and Support Center intends to award a MATOC IDIQ contract that procures A-E services by task order under a contract that accommodates multiple customer ordering simultaneously for varying needs of A-E requirements. The contract will consist of a one-year base period with four one-year options for a total of five years. The total amount of each contract over the five year ordering period is expected not to exceed $1,800,000.00. The program capacity shared by all awarded contracts will be approximately $9,000,000.00. Work will be issued by negotiated firm-fixed price task orders. The initial contract is anticipated to be awarded in Fiscal Year 2015. The most applicable North American Industrial Classification Code (NAICS Code) is 541310 (Architectural Services), with a small business size standard of $14,000,000.00 in average annual receipts. To be eligible for contract award, the submitting A-E contractor must be registered in the System for Award Management (SAM) and have the professional qualifications necessary for satisfactory performance of the required services. All contracts will include the specific A-E clauses, as follows: In accordance with (IAW) FAR 52.236-23, Responsibility of the Architect-Engineer Contractor, the A-E Contractor shall be responsible for the professional quality, technical accuracy, and the coordination of all designs, drawings, specifications, and other services furnished by the Contractor under this contract. The Contractor shall, without additional compensation, correct or revise any errors or deficiencies in its designs, drawings, specifications, and other services. In accordance with DFARS clause 252.236-7009, Option for Supervision and Inspection Services, the Contractor may perform any part or all of the supervision and inspection services for the construction contracts resulting from the A-E services, however, the A-E contractor will not be responsible for the direct performance of the construction itself. In accordance with FAR 52.219-14, at least 50% of the cost of contract performance incurred for personnel shall be expended for employees of the prime contractor on a contract reserved for small business. 2, PROJECT INFORMATION 2.1 Description of Work. The Interior Design A-E Services contracts will provide Architect-Engineer (AE) design services for furniture acquisition technical support and for Comprehensive Interior Design services to include FF&E design and SID design. These services will be provided based on programmatic requirements as determined for each project will support various Army, Navy, Air Force, Marine Corps and MEDCOM installations. Projects are located at various Department of Defense (DoD) facilities and other federal and state facilities worldwide. Services will require the knowledge, technical expertise and licensure/certifications required to provide interior design support for furniture acquisitions and CID support. The contractor shall be responsible for providing technical support for furniture acquisitions and shall be responsible for accomplishing deliverables using existing programmatic technical templates and processes utilizing MSOffice, including Word and Excel. The contractor shall also be responsible for accomplishing CIDs, including FF&E designs and SID designs through the preparation of drawings using computer-aided design (CAD) in AutoCAD and building information modeling (BIM) technologies delivering the three-dimensional drawings in Revit software, in electronic digital format, if applicable. Specifications for SID support shall be processed and delivered in SpecsIntact software configuration. All final deliverables, to include technical procurement documents, drawings and specifications shall be delivered in a format compatible with Corps of Engineers electronic bidding system. The Government will only accept a final product that is fully operational, without conversion, reformatting or editing. Work shall be submitted in hard copy and digital formats. Record drawings shall also be submitted in reproducible hard copy format. The projects have a projected MCA construction value of up to $50M or more and require integration of highly complex targetry, digital instrumentation, computer control/tracking systems, and data capture/playback. IAW FAR Part 16.505(a)(8)(ii) and DFARS clause 252.236-7009, Option for Supervision and Inspection Services, the Government may direct the Contractor to perform any part or all of the supervision and inspection services for the construction contract. In accordance with FAR 36.209, the A-E Contractor and its subcontractors, suppliers, and consultants selected for award will not be considered eligible for DoD construction contracts that relate to any A-E Task Orders awarded under this contract. Potential Organizational Conflicts of Interest (OCIs) are also governed by FAR subpart 9.5. 2.2 Location of Work. The contract scope will primarily be in the continental United States but will also include Outlying Areas and geographic coverage that includes international locations. The mission is to provide A-E services in the continental United States but will also include a remote capability to meet the requirements and demands of our worldwide customers. This acquisition will include work sites and requirements inside and outside the United States and Outlying Areas as defined by FAR 2.101. Services will include providing United States based technical support for furniture acquisitions, as well as CID services for both FF&E designs and SID designs for military customers at remote and international locations, such as United States occupied installations and/or host nation facilities. All actual design work is expected to be performed within the United States. From the Continental United States, the service provider must have the capability to perform multiple task order requests for work in locations outside the United States and Outlying Areas as defined by FAR 2.101, including, but not limited to Germany, Italy, Spain, Afghanistan, Iraq, Guam, Korea, Mexico, Japan, and Singapore. Consistent with CEHNC international missions, as documented in ER 10-1-22, Organization and Functions: U. S. Army Engineering and Support Center, Huntsville, there are no geographic boundaries for this acquisition and the term quote mark international quote mark furniture acquisition technical support and interior design services are applicable to this procurement. Although most international support will be for A-E services that are remotely provided from the United States, limited international travel may be required on some work requirements. 3. SELECTION CRITERIA: 3.1 Primary Selection Criteria - The selection criteria for this acquisition are listed below in descending order of importance. Criteria (1) - (10) are primary. Price will not be used as a criterion. The project submission requirements and the corresponding selection criteria are listed, as follows: The contractor shall provide examples of at least three (3) but no more than five (5) projects. These projects should demonstrate relevant experience in the following criteria (a-f). Example projects shall clearly state what specific role the contractor and key subcontractors had including the names of the key personnel. Preference will be given to those projects that are design complete within the last three (3) years from the date of this synopsis. The contractor shall not submit a base contract (IDIQ, MATOC, etc.) or multiple task orders as a project, only individual task orders from a base contract can be submitted as one project. The Government will consider only the first five projects in the submission; any remaining projects will not count for the five projects. These example projects shall be from the prime or key subcontractors (a key subcontractor is a subcontractor that will perform 10% or more of the work for this contract) that demonstrate specialized experience and technical competence with A-E services as they relate to the technical support for furniture acquisition packages and the preparation of Comprehensive Interior Design packages to include fully developed FF&E designs and SID designs of similar size, scope and magnitude to the services being procured under this synopsis. Preference will be given to projects that show the proposed team has worked together. The submitting A-E contractor shall submit an unconditional letter of commitment signed by key subcontractors (if the key subcontractor is a subcontractor that will perform 10% or more of the work for this contract). A Sample Letter of Commitment provided with the synopsis (Attachment A). a. Specialized corporate experience and technical competence in: (1) Development of FF&E Request for Quotation (RFQ) technical documents by coordinating the user requirements with the design, existing conditions, and function of use. (2) Development of non-proprietary furniture item descriptions (FID) through knowledge of and experience with major furniture manufacturers. (3) Perform technical reviews of the manufacture or the vendor FF&E quotes against the RFQ's FID and other technical direction of the RFQ. (4) Survey facilities to develop requirements for FF&E packages and CIDs. (5) Inspect complete installations assuring that furniture meets the FID quality and RFQ quantities in accordance with the contract award. (6) Develop and record findings of deficiencies and missing items. (7) Development of Comprehensive Interior Design packages to include Furniture, Fixtures and Equipment (FF&E) designs and Structural Interior Design (SID) packages in accordance with design instructions applicable to specific projects. (8) Develop finish presentation boards, if required, for specific design projects. (9) Coordinate support, as needed, from other disciplines to successfully configure a facility to adapt to new uses or expand areas to fit missions larger than the areas of a facility that was provided and the multi-discipline design support will be required. (10) Produce design drawings in a format fully compatible with the latest versions of AutoCAD and the capability to perform Building Information Modeling (BIM) utilizing Revit. b. Professional Qualifications Criteria: (1) The submitting A-E contractor shall provide a Certificate of Authorization (or equivalent) to demonstrate that it is permitted by law to practice the professions of architecture and/or engineering work in at least one state, territory, or jurisdiction of the United States as required by FAR 36.601-4(b). (2) Resumes shall be provided on SF-330, in Section E for qualified professional personnel in the following key disciplines: project management, , electrical engineering, mechanical engineering, cost engineering, interior design, architecture and structural engineering. The project manager shall have an active registration in interior design, architecture or engineering. The electrical engineer, mechanical engineer, interior designer, architect, and structural engineer shall have an active registration in their respective professional discipline. The lead personnel in the field of cost engineering must have an active registration in any of the engineering disciplines listed above or must be a Certified Cost Consultant (CCC) or must be a Certified Cost Engineer (CCE). The proposal shall clearly identify the lead designer in each of these disciplines, the type of registration, and in what states they are registered. It is recommended that interior designers be NCIDQ certified with current certification status. (3) The submitting A-E contractor shall submit unconditional letters of commitment for key personnel not currently employed by the prime or key subcontractor(s). Letters of commitment are additionally required from any non-key subcontractors that will be providing key personnel. The evaluation of personnel will consider education, certifications, training, registration, overall and relevant experience, longevity with the firm, and specialized experience as required above. (4) Qualified personnel to provide interior design support should be experienced with USACE design standards and processes and should be familiar with the UFC 3-120-10 for Interior Design as well as other UFC as applicable to this synopsis. Personnel should also be knowledgeable and experienced with applicable building codes, to include the current version of the International Building Code (IBC) and the National Fire Protection Association (NFPA) Life Safety Code for new and renovation construction projects adapted for use by USACE. c. Past Performance Criteria: (1) Past performance of the prime firm and any key subcontractors on DoD contracts for projects relevant in size, scope and similarity to the services being procured under this synopsis with respect to quality of work, and compliance with performance schedules, as determined from ACASS and other sources will be used for evaluation of the A-E contractor. ACASS is the primary source of information on past performance (DFARS 236.602-1(a)(4)) that the evaluation board will consider. ACASS / PPIRS may be queried for all prime / joint venture (JV) and key subcontractors. The firm should also demonstrate the ability to comply with the proposed design cost and a history of designing projects to pre-defined construction cost limitations. Any credible, documented information on relevant past performance can be considered. (2) The submitting A-E contractor shall provide a reference using the Past Performance Questionnaire (PPQ) (Attachment B) for each example project submitted by the A-E contractor under the Specialized Corporate Experience and Technical Competence. The submitting A-E contractor is responsible for forwarding the PPQ to each past performance reference submitted under this synopsis. The submitting A-E contractor should complete Blocks 1-4 of the PPQ and the client/customer complete Blocks 5-8 and the evaluation survey. The client/customer should return the PPQ to the firm to be submitted with the SF330. Each PPQ will be evaluated to determine if it is relevant to the design of facility repairs, renovations, conversions, or rehabilitations of similar size, scope and magnitude to the services being procured under this synopsis and design complete within the last three (3) years from the date of this synopsis, and if so, the quality of the A-E contractor's past performance will be assessed. In the event that adverse past performance information is obtained outside the PPIRS/ACASS, the firm will have the opportunity to respond to any adverse information received which it had not had a previous opportunity to comment if the vendor is in the slate of firms selected for discussions IAW FAR 36.602-3(c) or if adverse past performance is the determining reason why the firm is not in the slate of the most highly qualified firms. If the A-E contractor's performance record is so sparse that no meaningful confidence assessment rating can reasonably be assigned, or if sufficient past performance data cannot be obtained from the questionnaires, PPIRS, other sources or the firm has no past performance record, the firm in either instance will be given an quote mark Unknown Risk quote mark or quote mark Neutral quote mark rating. d. Capacity Criteria: Firms competing shall demonstrate an effective organizational structure and quality management plan to accomplish multiple individual task orders simultaneously in a one year period of time with values ranging from $20,000 to $350,000 each. The evaluation will consider the management approach, coordination of disciplines and subcontractors, and quality control procedures to complete the aforementioned projects. e. Knowledge of Locality Criteria: The submitting A-E contractor shall demonstrate their capability to perform work in multiple geographic regions and international locations. The A-E contractor should demonstrate the capability to perform furniture acquisition technical support as well as the preparation of CID design submittals throughout the fifty (50) United States, its territories and other various worldwide military facility locations. Greater consideration will be given to the A-E contractors with the demonstrated capability to perform work in diverse locations, rather than only having capacity or ability in a limited geographic region. Criteria (f) and (h) are the secondary criteria and will only be used as quote mark tie-breakers quote mark among firms that are essentially technically equal. 3.2 Secondary Selection Criteria f. Small Business (SB) and Small Disadvantaged Business (SDB) Participation: Extent of participation of small businesses, small disadvantaged businesses, women-owned small businesses, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. The goals and participation plan form are provided under Attachment C. Small Business Category and % of Total Acquisition Value Small Business (SB) 40% Small Disadvantaged Business (SDB) 13% Woman-Owned Small Business (WOSB) 5% Historically Black Colleges And Universities (HBCU) and Minority Institutions (MI) 0% HUBZone 4% Veteran-Owned Small Business (VOSB) 3% Service-Disabled Veteran-Owned Small Business (SDVOSB) 3% g. Geographic Proximity: Firms will be evaluated based on their proximity to the U.S. Army Engineering and Support Center, Huntsville, AL. Firms with a closer proximity to the Huntsville area will incur less travel costs and less administrative costs in coordinating the A-E design requirements with the CEHNC Engineering Directorate.. h. Volume of work Criteria: Volume of DoD A-E contract awards within the last 12 months, with the objective of effecting an equitable distribution of DoD A-E contracts among qualified firms, including SB and SDB. 4. SUBMISSION REQUIREMENTS: The submitting A-E contractor must be registered in the System for Award Management (SAM) to be eligible for award. The submitting A-E contractor may register via the SAM internet site at http://www.sam.gov. SF-330 submissions will be received until 1400 (2:00 pm) Central Time on 25 July 2014. Interested firms having the capabilities to perform the work described above must submit seven (7) hard copies and one (1) PDF copy on a compact disc (CD) of the SF 330 Part I and SF 330 Part II for the prime and key subcontractors or JV Partners to the Contract Specialist at the following address: US Army Engineering and Support Center CEHNC-CT ATTN: Mr. Martin Bushey 4820 University Square Huntsville AL 35816-1822 All hard copy submissions shall be identical in content. The SF 330 Part I shall not exceed fifty (50) pages (8.5 quote mark x 11 quote mark ), including no more than five (5) pages for Section H. Each side of a sheet of paper is considered one page; use no smaller than 12-font type. Letters of Commitments and Certificate of Authorization will not be counted in the 50 page limit. However, firms may use no smaller than 10 pt font on organizational charts, graphs, tables and matrices. Charts, graphs etc. may have only that amount of text to explain the item and shall not contain excessive text that circumvents the page and font limits. Pages that violate these limits will be removed from the packet and will not be evaluated. Include the firm's DUNS number in the SF 330, Part I, Section H. In Section H, indicate the estimated percentage of involvement of each firm (prime, key-subcontractors, and other subcontractors) on the proposed team. Facsimile or email transmissions will not be accepted. Solicitation packages are not provided and no additional project information will be given to firms during the announcement period. Any JV Partnership must submit a signed and dated joint venture agreement as a part of the package. This paperwork will not be included in the page count and should be provided as an attachment. This is not a request for proposal. Awards are anticipated to be made in the 4th Quarter of FY14 or later. 5. POINT OF CONTACT (POC) Martin Bushey, 256-895-1119 Contract Specialist martin.bushey@usace.army.mil Shirley A. Martin, 256-895-1642 Contracting Officer shirley.a.martin@usace.army.mil Interested offerors can post questions on the ProjNet website (www.projnet.org) using the following bidder inquiry key: 52Z3AC-YU583H The deadline for posting questions is 1400 (2:00pm) Central Time, July 07, 2014. 6. PLACE OF PERFORMANCE Most A-E services under this acquisition will be performed at the contractor's office or the Huntsville Center.

R--VA-741-RQ-0036 Interior Design for HEC Renovation

Department of Veterans Affairs, VA Health Administration Center | Published February 3, 2011  -  Deadline February 9, 2011
cpvs

The contractor shall perform complete interior design services recommendations to include, wall covering, carpet, artwork, acquisition and relocation of office furnishings, etc., for newly acquired and renovated space at 2957 Clairmont Road, Atlanta, Georgia. The specific areas covered by this scope of work include renovation of 1st , 2nd, 3rd and 5th floors The contractor shall obtain quotes for recommendations for services necessary to purchase, dismantle, move and reassemble cubicles and office furnishings. Contractor shall also research and provide recommendations from a minimum of three vendors/quotes for each service, such as cubicles, office furniture, furnishings, moving services, etc.

Architectural & Interior Design for JGB Board/Meeting Rooms Upgrade

Washington Metropolitan Area Transit Authority, Procurement and Materiels | Published October 15, 2009  -  Deadline October 30, 2009
cpvs

RFQ/GP10041/NAC SYNOPSIS Date Posted on Internet: October 15, 2009 Date of Invitation: October 15, 2009 Proposals Due: October 30, 2009 Project Description: Architectural/Interior Design for JGB Board/Meeting Rooms Upgrade The Washington Metropolitan Area Transit Authority (WMATA) is seeking the services of a Architect-Engineer (A-E) to perform Architectural/Interior Design and Engineering Services for the upgrade of the Board and Meeting Rooms at WMATA�s headquarters, the Jackson Graham Building (JGB), located at 600 Fifth Street, N.W. Washington D.C., 20001. The areas in this scope include the Board Room, the Meeting Room, and adjacent supporting areas such as the connecting vestibule/corridor between the Board Room and Meeting Room entrances, the Caucus Room, the Press Room, and audio-visual equipment areas. WMATA plans to make several upgrades to these rooms, including some architectural features, a new horse-shoe shaped custom built-in board room table, a raised platform for the board room table area, an opening in the wall between the Caucus Room and Board Room raised platform area, an access ramp to the raised platform level in the Caucus Room, art work, audio-visual equipment, lighting, wall finishes, carpet, etc. WMATA also plans to remove the non bearing masonry wall between the Board and Meeting rooms and replace it with a new acoustic folding partition and track, to allow both rooms to function as one for large gatherings. WMATA also plans to upgrade some AV equipment and microphones before this project begins. This project is divided into three (3) major phases, but only Phase One is being considered at this time. For Phase 1, the selected designer shall produce at least three concept interior design options, with proposed finishes and colors on presentation boards with actual samples of materials including but not limited to carpet, wall panel system and fabric finishes, paint colors, wood finishes, lighting schemes and fixture types, photos of chairs and their finishes, hardware finishes, a 3-D color illustration of what the rooms will look like and any significant detailing that affects the area�s appearance for each option. Color and finish boards of the three options shall be reviewed by WMATA�s upper management for comments, and a final selection shall be made and approved. See attached solicitation documents. All questions shall be directed to the Contract Administrator, Mr. Nichel Crooks who can be reached at ncrooks@wmata.com or at (202) 962-1440. As an alternate, Mr. James Foote can be reached at jfoote@wmata.com or at (202) 962-1481. Please visit our Internet web site at http://www.wmata.com/business/procurement_and_contracting for information regarding this and other WMATA contracts.

Interior Design Team

Department of the Air Force, Air Force Special Operations Command | Published June 3, 2009  -  Deadline June 10, 2009
cpvs

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemental with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-32, Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 20090115, and Air Force Acquisition Circular (AFAC) 2009-0318. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The solicitation number for this procurement is 09-R-0020 and is a Request for Quotation (RFQ). Submit written offers only, oral offers will not be accepted. All firms or individuals responding must be registered with the Central Contractor Registration (CCR). Information concerning CCR registration requirements may be viewed via the Internet at http://www.ccr.gov or by calling the CCR Registration Center at 1-888-227-2423. This solicitation is a set-aside 100% for Small Business. The North American Industry Classification System (NAICS) is 541410. Small Business Size Standard is $7 million. Only one contract will be awarded. It is the firm's or individual's responsibility to be familiar with applicable provisions and clauses. All FAR Provisions and Clauses may be viewed in full text at the Federal Acquisition Regulation Table of Contents via the Internet at http://farsite.hill.af.mi/vffar1.htm. All items shall be delivered FOB DESTINATION to Bldg. 600 110 E. Sextant Ave Cannon AFB, NM 88103 CLIN 0001: Interior Design Team will meet with represenatives from the Landing and the Drop Zone to better understand the desired functionality and specifics on the look and feel for each space. The team will walk through all spaces to asess the condition of the space, millwork and furnishings. Once programming is complete the team will develop conceptual ideas for each facility and present them for approval before moving to the next phase. FAR 52.212-1 Instructions to Offerors - Commercial Items The following addenda is provided to this provision: Paragraph (b), entitled "Submission of Offers", Request for Quotation should be submitted shall contain the following information: Solicitation Number; Time Specified for Receipt of Offers; Name; Address; Telephone Number of Offerer; Terms of the Expressed Warranty; Price; Any Discount Terms and Acknowledgement of all Solicitation Amendments. Quote shall also contain all other documentation specified herein. Signed quotes must indicate quantity, unit price and total amount. Offers may be submitted via facsimile or mail. Paragraph (c), entitled "Period of Acceptance for Offerers", The offerer agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers. Paragraph (f)(1), entitled "Late submissions, modifications, revisions, and with the drawls of offers", Late offers: Request for Quotations or modification of quotes received at the address specified for the receipt of offers after the exact time specified for receipt of offers will not be considered. FAR 52.212-2 Evaluation - Commercial Items The following addenda is provided to the provision: The Government will award a firm-fixed price contract resulting from this combined synopsis/solicitation to the responsible offerer whose offer conforming to the synopsis/solicitation will be the most advantageous to the Government, price and other factors considered. Award shall be based on All or None and Best Value to the Government. Best value can include but is not limited to price, delivery date, and technical capability. FAR 52-212-3 Offerer Representations and Certifications-Commercial Items. Complete only paragraph (j) of this provision if the annular representations and certificates have been completed electronically at http://orca.bpn.gov. If the annual representations and certifications has not been completed electronically at the ORCA website, then only paragraphs (b) through (i) of this provision need to be completed. FAR 52.211-6 Brand Name or Equal NOTE: Any Offer Submitted as an Or Equal Must Include Require Documentation In Accordance with this Provision FAR 52.212-4 (dev) Contract Terms and Conditions-Commercial Items FAR 52.212-5 (dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor-Cooperation with Authorities an Remedies FAR 52.222-21 Prohibition of Segregated Facilities FAR 52.222-26 Equal Opportunity FAR 52-222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. FAR 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Regulation FAR 52.233-3 Protest After Award FAR 52.247-34 F.O.B. Destination FAR 52.252-1 Solicitation Provisions Incorporated by References FAR 52.252-2 Clauses Incorporated by Reference FAR 52-252-5 Authorized Deviations in Provisions FAR 52-252.6 Authorized Deviations in Clauses DFARS 252.204-7004 Required Central Contractor Registration DFARS 252.212-7000 Offerer Representations and Certifications-Commercial Items DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. DFARS 252.225-7000 Buy American Act-Balance of Payments Program Certificate DFARS 252.225-7001 Buy American Act and Balance of Payments program DFARS 252.232-7003 Electronic Submission of Payment Requests DFARS 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings AFFARS 5352.201-9101 Ombudsman (see below POC) RESPONSE TIME: Request for Quotation will be accepted at the 27th Special Operations Contracting Squadron, 110 E. Sextant, Bldg 600, Cannon AFB NM 88103-5109 NO LATER THAN 2:00 pm Mountain Time on 10 June 2009. Quotations may be faxed to 575-784-2959 with a signed original forwarded by mail. Facsimile offers will be accepted. Contracting Officer: Patricia Thatcher. Point of Contact for this Solicitation is: A1C Kathleen Sao, 575-784-1359 Fax 575-784-1147 e-mail kathleen.peters-sao@cannon.af.mil or Patricia Thatcher, 575-784-2890, Fax: 505-784-1147, e-mail patty.thatcher@cannon.af.mil.

C--Interior Design Service

Department of the Interior, Fish and Wildlife Service | Published October 16, 2008  -  Deadline November 10, 2008
cpvs

U. S. Fish and Wildlife Service (Service), located in Arlington, VA, is seeking eligible sources capable of completing services as descrived below:The U.S. Fish & Wildlife Service (hereafter referred to as "the Government") intends to award a Blanket Purchase Agreement (BPA) established on the basis of fixed price rates with a threshold of up to $500,000 for five years.This is a total woman owned, small business set-aside. Proposals from Offerors that are not a woman-owned small business (as defined by the U.S. Small Business Administration) will not be considered. The NAICS code is: 541410. The PSC code is: C211.This is a local set-aside restricted to the Washington, DC and locations within 50 miles of Washington, DC. 1) DATE: 10/16/082) Contracting Office Zip Code: 222033) Classification Code: R (Professional, Administrative, and Management Support Services)4) Contracting Office Address:U.S. Fish & Wildlife ServiceDivision of Contracting & Facilities Management 4401 N. Fairfax Drive, MS 7118-43Arlington, VA 222035) Subject: Space Planning, Design and Other Related Services6) Solicitation No. 982109Q2017) Contract Specialist Alina Sadoveanu (address as in #4, above)Questions to be addressed to Contract Specialist via e-mail only. TelephoneInquiries will not be accepted. (See G, "Instructions to Offerors", paragraph. Entitled "Technical Questions".E-mail: Alina_Sadoveanu @fws.gov8) Place of Contract performance: Arlington, VA and Washington, D.C.9) This is a 100% total woman-owned small business set-aside.STATEMENT OF WORK1.0 Objective.This requirement has the objective of acquiring the capability and use of space analysis, space planning, architectural and design, project management, construction management, design-build and other related services for the U.S. Fish and Wildlife Service. The Contractor shall provide total services as described in this statement of work. Changes to the above locations may occur throughout the term of this BPA and will be included in the scope.2.0 Description of Requirement.The majority of the work will be performed at the Arlington Headquarters (Buildings, 4301,4401 and 4501) North Fairfax Drive, Arlington, VA, and 1849 C Street, N.W., Main Interior Building. Changes to the above locations may occur throughout the term of this BPA. Services required include but not limited to:" Develop space plans, and/or design intent drawings," Generate construction drawings, " Coordinate permit applications and inspections with applicable county governments," Conduct Construction administration, and" Provide project support for other areas including but not limited to audio visual, furniture, security, signage, filing, and storage." Perform design build projects Subcontracting is acceptable, with prior Government approval.Orders will be placed by individual BPA Calls as requirements arise. Each Task Order will include performance objectives, delivery requirements and other necessary information.3.0 TravelIncidental travel for performance requirements over 50 miles outside the Washington, D.C. metropolitan area will be separately reimbursed by the Government. All contractor travel must be approved by the COR in advance and in writing and shall be subject to the Federal Travel Regulation, as applicable, on the date(s) traveled. See GSA.GOV/FTR4.0 Government-Furnished Equipment and PropertyThe Government will not provide any equipment or property under this agreement.PERIOD OF PERFORMANCEThe contract performance period will be for a period of five years.INSPECTION AND ACCEPTANCE CRITERIAFinal inspection and acceptance of all work performed, reports and other deliverables will be performed at the place of delivery by the COR.General Acceptance CriteriaGeneral quality measures, as set forth below, will be applied to each work product received from the contractor under this statement of work:" Accuracy - Work Products shall be accurate in presentation, technical content, and adherence to accepted elements of style." Clarity - Work Products shall be clear and concise. Any/All drawings shall be easy to understand and be relevant to the supporting narrative." Compliance - With applicable Federal, State and local codes and Government mandatory for greening ,and indoor air quality as set forth by the Environmental Protection Agency and/or General Service Administration." Consistency to Requirements - All work products must satisfy the requirements of this statement of work." Format - Work Products shall be submitted in hard copy (where applicable) and in a media mutually agreed upon prior to submission. Hard copy formats shall follow any specified Directives or Manuals." Timeliness - Work Products shall be submitted on or before the due date specified in this statement of work or submitted in accordance with a later scheduled date determined by the Government.Unless otherwise specified, the Government will have a maximum of ten (10) working days from the day the draft deliverable is received to review the document, provide comments back to the contractor, approve or disapprove the deliverable(s). The contractor will also have a maximum of ten (10) working days from the day comments are received to incorporate all changes and submit the final deliverable to the Government. All days identified below are intended to be workdays unless otherwise specified. QUALITY ASSURANCEThe COR will review, for completeness, preliminary or draft documentation that the Contractor submits, and may return it to the Contractor for correction. Absence of any comments by the COR will not relieve the Contractor of the responsibility for complying with the requirements of this work statement. Final approval and acceptance of documentation required herein shall be by letter of approval, or signature on plans as acceptance by COR. The Contractor shall not construe any letter of acknowledgment of receipt material as a waiver of review, or as an acknowledgment that the material is in conformance with this work statement. Any approval given during preparation of the documentation, or approval for shipment shall not guarantee the final acceptance of the completed documentation.CENTRAL CONTRACTOR REGISTRATION (CCR): In order to be awarded a United States Government contract, all Contractors must be registered with the CentralContractor Registration (CCR). Registration is cost-free. Go to http://www.ccr.gov toRegister. Prior to registering with CCR, you must obtain a DUNS number. The DUNS number may be obtained on-line by registering with Dunn & Bradstreet. The website is:http://smallbusiness.dnb.com. There is no cost to register with D&B or to receive aDUNS number. You are encouraged to register immediately since the process can take considerable time.INSTRUCTIONS TO OFFERORSSUBMISSION REQUIREMENTS: Solicitation packages are not available. This is not a Request for Proposal. Interested firms having the capabilities to perform this work must submit two paper copies of the SF 330, Part I, and, Part II. The proposal shall be submitted as one file using Microsoft Word (.doc) or Adobe Acrobat (.pdf) and may not exceed 50 pages. In addition, firms may submit a portfolio. At the end of the solicitation process all materials will be retained for the file. No other general notification to firms under consideration for this project will be made. Facsimile transmissions will not be accepted. Solicitation packages are not provided and no additional project information will be given to firms during the announcement period.Interested vendors may submit questions in writing to POC Alina Sadoveanu at Alina_Sadoveanu@fws.gov by October 27, 2008. Answers will be posted in the form of an amendment to this synopsis on October 29, 2008. All SF 330s are due on November 10, 2008.All SF 330s received will be reviewed in accordance to the technical evaluations and graded using adjectival grading method. Then the SF 330 will be ranked and firm ranked #1 will be contacted for a price proposal SF252. The Government will only contact the next ranking firm if it fails negotiations with the first ranking firm. EVALUATION FACTORS The evaluation factors listed will be equally weighted. 1. Demonstrate experience in working on office space interior design projects specifically with the federal government in the past five years. Briefly describe work on historical buildings and executive space. 2. Provide three references on projects that have been completed in the past three years. The references will be contacted to inquire about the timelines of service, accuracy of the proposed budget, customer satisfaction, and quality of work. 3. Demonstrate experience in application of greening requirements, and use examples how in your company's previous work, those requirements have been implemented. EVALUATION METHODOLOGY Adjectival rating for non-price factors: Outstanding: Greatly exceeds the minimum performance or capability requirements in a way beneficial to the Government. There are no significant weaknesses. Those aspects of a factor or sub-factor resulting in an "Outstanding" rating may be incorporated into the resulting contract. Excellent: Exceeds the minimum performance or capability requirements in a way beneficial to the Government. There are no significant weaknesses. Those aspects of a factor or sub-factor resulting in an "Excellent" rating may be incorporated into the resulting contract. Acceptable: Meets the minimum performance or capability requirements. There may be minor but correctable weaknesses. Marginal: May meet the performance or capability requirements. There are apparent or moderate weaknesses that are correctable. Unacceptable: Fails to meet the performance or capability requirements. There are unacceptable weaknesses. POC:Alina Sadoveanu at 703-358-2172 or e-mail at Alina_Sadoveanu@fws.gov.

Z--Interior Design Services

Department of the Army, Army Contracting Command, MICC | Published September 4, 2013
cpvs

Award was made to Minc Interiors Inc. on 29 August 2013.

Interior Design HQ Bldg

Department of the Air Force, Air Force Global Strike Command | Published March 30, 2012  -  Deadline April 13, 2012
cpvs

Notice to Offerors: This a notice of proposed contract action issued solely for information and planning purposes; it does not constitute a Request for Proposal (RFP) or a promise to issue and RFP in the future. This notice does not commit the Government to contract for any supply or service whatsoever. The Government reserves the right to cancel any solicitation, either before or after the closing date. In the event the Government cancels any solicitation, the Government has no obligation to reimburse an offeror for any costs. The NAICS for this project is 541430 and the small business size standard is $7M. Work consists of providing corporate-quality signage plus a lighting design for HQ AFGSC building. Requires fabrication, transportation, and installation of interior signage plus a lighting design and installation for the signage. The interior signage shall be architectural art glass or similar. This is only a draft and does not constitute the final Statement of Work which will be issued with the solicitation. The contractor is required to provide all labor, equipment, transportation, materials, quality control, and supervision necessary to fulfill the requirement at Barksdale AFB, Louisiana, in accordance with the project Statement of Work. The Request for Proposal anticipated posting date will be on or about 13 April 2012. The Request for Proprosal will close out on or about 15 May 2012. This acquisition is 100% Small Business set-aside. Any Request for Proposal will be available by Electronic Transmission only at: http://www.fbo.gov. Potential contractors must be currently registered in the Central Contractor Registry to be eligible for award. (See Internet Site: https://www.bpn.gov/ccr/default.aspx). All responsible sources may submit an offer good through 180 calendar days after the Request for Proposal closing, which shall be considered by the agency. Potential contractors must also be currently registered with ORCA.

Interior Design Services

Overseas Private Investment Corporation, Contracts and Administrative Services | Published July 10, 2009  -  Deadline August 14, 2009
cpvs

OPIC requires a vendor for the design, acquisition, delivery and installation of furnishings and equipment for OPIC offices in Washington, DC.

Z--Interior Design Tasks

Department of Veterans Affairs, Syracuse VAMC | Published May 7, 2008  -  Deadline June 13, 2008
cpvs

It is anticipated that RFP 528-08-RP-0141 will be issued the week of May 12, 2008. The solicitation will be issued subject to the availability of funds and unrestricted pursuant to the Small Business Competitiveness Demonstration Program of FAR 19.10 as to qualifying business size for competitive responses, except that this is a cascaded solicitation to allow maximum opportunity for participation to the following socio-economic classifications (in descending order of priority): Service-Disabled Veteran-Owned Small Business; Veteran-Owned Small Business; HUBZone Small Business, and SBA Certified Small Disadvantaged Business.Written, faxed, or e-mailed requests for the solicitation are required, including company name, address, POC, telephone voice number, fax number, and e-mail address. No telephone requests will be accepted. The solicitation documents will be available from the Contracting Officer on CD and no paper copies will be provided. Except for potential solicitation amendments, no other solicitation documents will be posted electronically at fbo.gov.Work includes all labor, material, equipment and supervision necessary to accomplish nine individual projects (Renovate Imaging Angio & CT for new equipment; Renovate 5 South for Outpatient PT; Renovate Space for Low Vision; Replace ICU Lav/Toilet Units; Remodel Canteen Dining Room; Renovate Histology Room C368: Renovate Speech Pathology; Renovate Imaging Reading Area; and Renovate X-Ray A328). Work will be phased with some tasks performed concurrently over approximately one year. Work includes demolition, asbestos abatement, HVAC, electrical, plumbing, erection of interior walls and finishes, etc.Attendance at a pre-proposal meeting tentatively scheduled for sometime during the week of June 2, 2008 is considered essential. The date, time and location of this meeting will be posted at fbo.gov when the solicitation is issued.The Government will award a contract resulting from the solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. This is not a Sealed Bid Procurement. The following factors (listed in descending order of priority) shall be used to evaluate offers: Construction Management, Price, Proposed Team, Proposed Construction Schedule, and Past Experience & Past Performance. Technical Factors when combined are slightly more important than Price. Offerors are advised that if technical proposals in the competitive range are essentially equal, award will be made on the basis of the lowest price.Estimated total construction cost is between $2,000,000 and $5,000,000. NAICS code is 236220 and the small business size standard is $31M.

Furniture Maintenance Support and Interior Design Services - SP4705-15-R-1015

Defense Logistics Agency, DLA Acquisition Locations | Published October 26, 2015  -  Deadline October 30, 2015
cpvs

The announcement is hereby reposted to extend the response time to October 30, 2015 at 1:00 p.m. EST.
Categories
  United States - Show all countries
Fort worth, tx (40)Louisville, ky (32)Washington, dc (24)E end blvd wilkes barre, pa (21)Seven hills, oh (21)Seattle, wa (17)East avenue tulsa, ok (15)Norfolk, va (15)Baltimore, md (14)Mobile, al (13)Omaha, ne (12)East stoner avenue shreveport, la (11)Huntsville, al (9)Jacksonville, fl (9)Little rock, ar (9)Philadelphia, pa (9)Holland avenue albany, ny (8)Nas jacksonville, fl (8)New york, ny (8)Corps of engineers, europe district, contracting division cmr 410 box 7, apo ae (7)Elmendorf afb, ak (7)Arlington, va (6)E main st danville, il (6)Fort shafter, hi (6)Los angeles, ca (6)Regional office golden co 80401 (6)Savannah, ga (6)Veterans drive st cloud, mn (6)E woodrow wilson drive jackson, ms (5)Front street norfolk, va (5)Holcombe blvd houston, tx (5)Millington, tn (5)Sacramento, ca (5)Bethesda, md (4)Clement street san francisco, ca (4)Colorado springs, co (4)Dupont, wa (4)Fort wainwright, ak (4)Fuller road ann arbor, mi (4)Kirkwood hwy wilmington, de (4)Maryland avenue norfolk, va (4)Maryland avenue norfolk, va (4)Nas jacksonville jacksonville, fl (4)Pearl harbor, hi (4)San francisco, ca (4)South lincoln ave lebanon, pa (4)Street kansas city, mo (4)Tacoma, wa (4)Veterans drive fort harrison, mt (4)West tenth street indianapolis, in (4)Winchester, va (4)Albuquerque, nm (3)Armstrong rd battle creek, mi (3)Atlanta, ga (3)Chicago, il (3)Clermont street denver, co (3)Cleveland, oh (3)E clinton avenue fresno, ca (3)East bannister road kansas city, mo (3)East h street iron mountain, mi (3)Elm street fargo, nd (3)Fort benning, ga (3)Glendale, co (3)Hagood avenue charleston, sc (3)Kirman avenue reno, nv (3)Lebanon pike murfreesboro, tn (3)Locust street reno, nv (3)Mcclellan business park, ca (3)Multiple shipping information. (3)Murfreesboro, tn (3)N lynn st arlington, va (3)Nas jacksonville jacksonville, fl (3)Phoenix, az (3)St trafficway leavenworth, ks (3)Tampa, fl (3)Tulsa, ok (3)Usace district, europe cmr 410 box 7, apo ae (3)Vandenberg afb, ca (3)Weiss street saginaw, mi (3)Wilshire blvd los angeles, ca (3), tx (2)23510-1096 (2)Alabama and mississippi (2)Alexandria, va (2)Armstrong road battle creek, mi (2)Attention: joseph embry minneapolis, mn (2)Attention: network contract manager minneapolis, mn (2)Avenue south nashville, tennessee (2)Avenue south nashville, tn (2)Bangor, me (2)Building a norfolk, va (2)Building one pittsburgh, pa (2)Camp lejeune, nc (2)Cincinnati, oh (2)College park, md (2)Crater lake highway white city, or (2)Denver, co (2)Denver, colorado (2)Detroit, mi (2)