Call +44 800 9755 164

Public tenders for agriculture in St-johns Canada

Find all Agriculture tenders in the world.
Finding business opportunities has never been easier.

Results for agriculture. Make a new search!

Germination/Tissue Culture Chamber

Agriculture and Agri-Food Canada | Published December 1, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Comprehensive Land Claim Agreement: No Nature of Requirements: Germination Chamber 01800-160797/A Howell (olz), Amanda Telephone No. - (709) 772-4997 Fax No. - (709)772-4603 The Department of Agriculture and Agri-Food Canada Research Center has a requirement for the purchase of a Seed Germination/Tissue Culture Chamber. The chamber shall be provided according to the Specification and Mandatory Requirements at Annex B. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Roof Replacement Project for Blair House in Kentville (Nova Scotia)

Agriculture and Agri-Food Canada | Published June 29, 2016  -  Deadline July 15, 2016
cpvs

INVITATION TO TENDER/ 01B46-16-054

Roof Replacement Project for Blair House in Kentville (Nova Scotia)

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

The scope of work involves the replacement of the roof system for Blair House in Kentville, Nova Scotia with a new metal roof. The work involves removing the existing asphalt roof shingles, installation new 5/8 plywood sheathing to the roof, along with a new high temperature peel and stick membrane, covered with new metal shingles. The project scope also includes a specified quantity of wood replacement items due to damage or rot, etc.

Site Visit:

A site visit will be held on Wednesday, July 6th, 2016 at 1:00PM (ADT) at 32 Main Street, Kentville Nova Scotia B4N 1J5. Offerors who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation and will be posted on buyandsell.gc.ca.
Tender Period Closing Date and Time: Friday July 15th, 2016 at 02:00 pm (Eastern Daylight Time).

AAFC will not necessarily accept the lowest or any tender.

Laboratory Casework Winmar Contract
Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the buyandsell.gc.ca service provider. Addenda, when issued, will be available from the buyandsell.gc.ca service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Services in Statistics, Geomatics and remote sensing Research for Saint-Jean-sur-Richelieu Research and Development Centre

Agriculture and Agri-Food Canada | Published June 7, 2016  -  Deadline July 19, 2016
cpvs

Request for a standing offer 01B46-16-027

Services in Statistics, Geomatics and remote sensing Research for Saint-Jean-sur-Richelieu Research and Development Centre.

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

The work involves conducting specialized statistical analyses, organizing databases, performing meta-analyses, programming a fuzzy logic inference system and a web-based geographic platform, acquiring images and processing remote-sensing images, and preparing scientific reports including tables and summary charts. Aimed at advancing science, the work will be used for the publication of scientific papers, and will also form a basis for the upgrade of a fuzzy logic inference system and an interactive web-based geographical platform that provides fertilization recommendations for agronomists and farmers.

Site Visit:
There is no site visit.
Tender Period Closing Date and Time: July 19, 2016 at 2:00PM (Eastern Daylight Time)

AAFC will not necessarily accept the lowest or any tender.

Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the Firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the BuyandSell service provider. Addenda, when issued, will be available from the BuyandSell service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa Street, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Maintenance, Repair and Replacement of Components -Building Management System Monitoring and Control System

Agriculture and Agri-Food Canada | Published April 29, 2016  -  Deadline September 6, 2016
cpvs

Request for standing offer 01B46-15-0224

Maintenance, Repair and Replacement of Components -Building Management System Monitoring and Control System

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

Agriculture & Agri-Food Canada (AAFC) requires a Departmental Individual Standing Offer (DISO) agreement with a qualified contracting firm to perform work as outlined in the APPENDIX "B” on an "as and when requested basis" on behalf of the Harrow Research and Development Centre in Ontario. The DISO will cover the repair and maintenance of the Delta Building Management System (DBMS).

Site Visit:
It is recommended that Firms intending to submit a proposal for this project visit the work site. A site visit will be held on Thursday, May 12, at 10:00 AM (EDT) at The Harrow Research and Development Centre, 2585 County Road 20 Harrow, Ontario N0R 1G0. Participants to the visit will be requested to sign an attendance form. Participants shall present themselves at the reception desk of the Research Centre, ten minutes before the visit scheduled start time.

Attendance to this visit is NOT MANDATORY but Firms that do not attend will not be given an alternative appointment, although they will not be precluded from submitting an offer. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation and will be posted on BuyandSell.gc.ca

Tender Period Closing Date and Time: June 9th, at 02:00 pm (Eastern Daylight Time).

AAFC will not necessarily accept the lowest or any tender.

Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the Firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the BuyandSell service provider. Addenda, when issued, will be available from the BuyandSell service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa Street, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Manure Spreader

Agriculture & Agrifood Canada | Published August 27, 2015
cpvs

Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: Manure Spreader 01800-160475/A Fisher (XAQ), Christine Telephone No. - (709) 772-8057 ( ) Fax No. - (709) 772-4603 Line1, Manure Spreader Agriculture and Agri-food Canada, Atlantic Cool Climate Crop Research Centre, 308 Brookfield Road, St. John's, NL, has a requirement for the supply and delivery of a - 4000 Gallon US Manure Spreader - as per the description and specifications at Annex "A" and "B". The goods must be received on site at our address on or before March 31, 2016. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Repair, Maintenance and Replacement of Heating, Refrigeration and Air Conditioning Systems

Agriculture and Agri-Food Canada | Published June 30, 2016  -  Deadline September 8, 2016
cpvs

Request for standing offer 01B46-15-0243

Repair, Maintenance and Replacement of Heating, Refrigeration and Air Conditioning Systems

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

One (1), Experienced, Contracting firm to supply licenced skilled labour, travel vehicles, tools, replacement parts and consumable materials to maintain and repair Heating, Refrigeration and Air Conditioning Equipment located at the at the London Research and Development Centre a time and materials (standing offer) basis. All work will be carried out by the successful Contractor’s staff; subcontracting other Contracting firms to carry out any part of the work is not acceptable.

Site Visit:
It is recommended that Firms intending to submit a proposal for this project visit the work site. A site visit will be held on Wednesday, July 13, 2016 at 10:00 AM (EDT) at the London Research and Development Centre, 1391 Sandford St. London, On N5V 4T3. Participants to the visit will be requested to sign an attendance form. Participants shall present themselves at the reception desk of the Research Centre, ten minutes before the visit scheduled start time.

Attendance to this visit is NOT MANDATORY but Firms that do not attend will not be given an alternative appointment, although they will not be precluded from submitting an offer. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation and will be posted on BuyandSell.gc.ca

Tender Period Closing Date and Time: August 9th, 2016 at 02:00 pm (Eastern Daylight Time).

AAFC will not necessarily accept the lowest or any tender.

Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the Firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the BuyandSell service provider. Addenda, when issued, will be available from the BuyandSell service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa Street, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Pigsty Walls and Ceiling Finishes Improvements – G building, Sherbrooke

Agriculture and Agri-Food Canada | Published June 20, 2016  -  Deadline December 7, 2016
cpvs

INVITATION TO TENDER/ 01B46-16-057

Pigsty Walls and Ceiling Finishes Improvements – G building, Sherbrooke

Sealed tenders for the project indicated above, addressed to the attention of the Contract Officer, Agriculture and Agri-Food Canada, will be accepted at the following address, up to the tender closing date and time indicated below:

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

TENDER RECEIVING UNIT
2001 Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Scope of Work:

The works consist in general in covering the walls and painting the ceiling and doors of Sherbrooke RDC Pigsty #7 Section G rooms (18 rooms). The type of wall covering will be HDPE plastic laminated on plywood. Multiple services located on the walls and the ceilings will have to be removed or detached and afterwards reinstalled or reattached. For example: water pipes, electrical conduits, junction boxes, electrical outlets, fire alarm devices, ventilation opening release mechanisms, hooks, shutters, etc.

Site Visit:

A site visit will be held on Monday, July 4th, 2016 at 10:00 AM (EDT) at 2000 College Street, Sherbrooke, QC J1M 0C8. Offerors who do not attend or send a representative will not be given an alternative appointment but they will not be precluded from submitting a bid. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation and will be posted on buyandsell.gc.ca.

PLEASE NOTE:

The pigsty is a biosecure environment. All visitors will have to follow the protection measures established by the Sherbrooke RDC. The tenderers will have the obligation to take a shower at the pigsty and wear the protective clothing provided on-site (overall, socks, cap and boots) during the visit. The persons that have been in contact with hogs or have visited a pigsty in the last 48 hours prior to the site visit won’t be allowed in the pigsty.

Tender Period Closing Date and Time: Tuesday July 12th, 2016 at 02:00 pm (Eastern Daylight Time).

AAFC will not necessarily accept the lowest or any tender.

Information requests and inquiries related to this tender process are to be directed, in writing, ONLY to the AAFC Contract Officer identified below. Bidders who contact anyone other than the AAFC Contract Officer to obtain such information during the solicitation period may, for that reason alone, be disqualified.

It is MANDATORY for the firms intending to submit tenders on this project to obtain the related specifications, plans and drawings, and all other tender documents through the buyandsell.gc.ca service provider. Addenda, when issued, will be available from the buyandsell.gc.ca service provider.

AAFC Contract Officer:

Carol Rahal

Agriculture and Agri-Food Canada (AAFC)
Corporate Management Branch
Assets Management, Eastern Service Centre

2001, Robert-Bourassa, suite 671-TEN
Montreal, QC, H3A 3N2
Email: carol.rahal@agr.gc.ca

Re-roofing Buildings 17 and 74, AAFC Fredericton, New Brunswick

Public Works and Government Services Canada | Published August 16, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   EC373-171221/A Doucet, Gisele PWB Telephone No. - (506) 636-4541  Fax No. - (506) 636-4376   Re-roofing Buildings 17 and 74, AAFC Fredericton, New Brunswick  Public Works and Government Services Canada has requirement for the removal and disposalof the existing metal roof cladding system and the supply and installation of a new pre-finished metal roof system for Building 17.  The work for Building 74 includes the removal and disposal of the existing asphalt shingle roofing underlay and the supply and installation of a new prefinished metal roof shingle system, complete with eave and roof edge removals and repairs, supply and installation of new roof edge, stack and vent pipe flashings, edge strips, trims and fasteners, closures and sealants.  The location of the work is the Agriculture and Agri-Food Canada (AAFC) Facility, 850 Lincoln Road, Fredericton, New Brunswick. All work is to be performed in accordance with the plans and specifications for PWGSC Project Number R.082428.001 forming partof the bid document. The Contractor shall perform and complete the work by November 30, 2016.  There will be an optional site visit on August 25, 2016 at 11:00 a.m..  All interested bidders are to meet at the Principal Entrance of the Agriculture and Agri-Food Canada Facility, 850 Lincoln Road, Fredericton, New Brunswick.  Although not mandatory, all contractors wishing to submit a tender for this work are encouraged to attend to become familiar with all aspects of the work.  It is recommended that the Bidder or a representative of the Bidder visit the work site and examine the Scope of the Work required and the existing conditions.  Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation.  Please note that this will be the only site visit for this project.  No other site visits will be arranged during the tender period.  New measures related to Code of Conductand certifications included in the solicitation documents requires attention.   The estimated cost for this opportunity is within the following category: $100,001- $250,000 (HST included). Standard bid and contract security for construction isrequired.  Inquiries: All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Gisele Doucet, telephone- (506) 636-4541, facsimile - (506) 636-4376 e-mail - gisele.doucet@pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allowsufficient time to respond.  Inquiries are to be made in accordance with SI03  Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document.  Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS. Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca.   This PWGSC office provides procurement services to the public in both official languages.  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Renovations to AAFC Lab, Bldg. 25, Research and Development Centre, St. John's, NL

Public Works and Government Services Canada | Published May 6, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Renovations to Agriculture & Agri-Food Canada (AAFC) Labs - Bldg. 25, St. John's Research and Development Centre, St. John's, NL  EA003-170118/A Carey, Mary Telephone No. - (709) 772-4754 Fax No. - (709) 772-4603   Public Works and Government Services Canada (PWGSC) has a requirement for the Renovations to AAFC (Agriculture & Agri-Food Canada) Labs, Building 25, St. John's Research & Development Centre, St. Johns, NL The work will consist of interior building renovations, including architectural, mechanical and electrical workin a Government of Canada building.   SPECIAL INSTRUCTIONS:  Before submitting a bid, it is recommended that bidders visit the site and its surroundings to review and verify the form, nature, and extent of the work.  Please review specification section 01 35 28 - Health and Safety Requirements  and take all appropriate safety measures for any site visit, either before or after acceptance of bid.    Bidders must refer to R2710T GENERAL INSTRUCTIONS  Construction Services  Bid Security Requirements (2016-04-04) for the Integrity Provisions applicable to this requirement.  IMPORTANT NOTICE TO SUPPLIERS: The Government Electronic Tendering Service is available at Buyandsell.gc.ca/tenders.  This web site will be the sole authoritative source forGovernment of Canada tenders, and Bidders are responsible for obtaining copies of tender forms and special instructions directly from this web site.  Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk.    Drawings and Specifications are available for viewing and downloading from this website in a Portable Document Format (PDF). Bidders should note that the Drawings and Specifications Package (DSP), which consistsof PDF files organized in an industry recognized directory structure, is included under Attachments.     Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents. These may be viewed at https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/all.   It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted tender.  Addenda, when issued, will also be available on this site.     Bids will be received in English, or French, at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador, A1C 5T2.  Bid Security is a requirement for this tender.  The estimated value for this opportunity is within the range of: $250,001.00 to $500,000.00.   Delivery Date Required:  Eighteen (18) weeks after award of contract.  GSIN # 5129B  Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Boiler Replacement, Potato Research Centre Bldg. 8

Public Works & Government Services Canada | Published June 1, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: YES (MERX) Electronic Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: EC373-160209/A Boiler Replacement - Building 8, Agriculture and Agri-Food Canada, Fredericton, N.B. Public Works and Government Services Canada has a requirement for the boiler replacement at the Agriculture and Agri-Food Canada in Fredericton, New Brunswick. The work covered under this project consists of the furnishing of all plant, labour, equipment and material listed for the construction of the Boiler Replacement in Building 8 Headerhouse at the Potato Research Centre in Fredericton, New Brunswick in strick accordance with specifications and accompanying drawings for PWGSC Project Number R.068224.001 forming part of the bid document. The contract completion is September 30, 2015. It is recommended that the Bidder or a representative of the Bidder visit the work site and examine the Scope of the Work required and the existing conditions. There will be an optional site visit on June 9, 2015 at 1:00 pm. All interested bidders are to meet at the main entrance of the Potato Research Centre, 850 Lincoln Road, Fredericton, New Brunswick. Although not mandatory, all contractors wishing to submit a tender for this work are encouraged to attend to become familiar with all aspects of the work. Any clarifications or changes to the bid solicitation resulting from the site visit will be included as an amendment to the bid solicitation. Please note that this will be the only site visit for this project. No other site visits will be arranged during the tender period. A public bid opening will be held at the Bid Receiving Unit, Room 421, 189 Prince William Street, Saint John, N.B. The estimated cost for this opportunity is within the following category: $250,001 - $500,000 (HST included). Inquiries: All inquiries of a technical nature and all questions of a contractual nature are to be submitted in writing to the Contractual Authority: Lisa Martin, telephone - (506) 851-7811, facsimile - (506) 851-6759 e-mail - lisa.m.martin@pwgsc.gc.ca. Inquiries are to be made in writing and should be received no less than five (5) calendar days prior to the closing date to allow sufficient time to respond. Inquiries are to be made in accordance with SI03 - Enquiries During The Solicitation Period, under Special Instructions To Bidders in the solicitation document. Standard bid and contract security for construction is required. Firms intending to submit tenders on this project should obtain tender documents through the Government Electronic Tendering System (GETS). Addenda, when issued, will be available on GETS. Standard terms and conditions for this procurement are incorporated by reference, and form part of the tender and contract documents. The standard documents are issued by Public Works and Government Services and may be viewed at buyandsell.gc.ca. This PWGSC office provides procurement services to the public in both official languages. Delivery Date: Above-mentioned The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Fume Hood replacement - Atlantic Cool Crop Climate Research Centre (ACCCRC), Bldg. 25, St. John', NL

Public Works and Government Services Canada | Published July 12, 2016
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Competitive Procurement Strategy:  Comprehensive Land Claim Agreement: No Nature of Requirements:   Fume Hood replacement - Atlantic Cool Crop Climate Research Centre (ACCCRC), Building 25,  St. John's, NL  EA003-170845/A Carey, Mary Telephone No. - (709) 772-4754 Fax No. - (709) 772-4603   Public Works and Government Services Canada (PWGSC) has a requirement for the removal and replacement of Existing Laboratory Fume Hoods at the Atlantic Cool Crop Climate Research Centre (ACCCRC), Building 25, St. John's, NL.  Work entails the removal of one fume hood and the installation of 3 new fume hoods.  There will be a scheduled site visit on Wednesday, July 27, 2016 at 2:30 p.m. Interested bidders are to meet at Building 25, ACCCRC, Agriculture & Agri-Food Canada, 308 Brookfield Road, St. Johns, NL.  SPECIAL INSTRUCTIONS:  Before submitting a bid, it is recommended that bidders visit the site as a part of the scheduled tender site visit to review and verify the form, nature, and extent of the work, materials needed, the means of access and the temporary facilities required to perform the work. Please review specification section 01 35 29.06 - Health and Safety Requirements  and take all appropriate safety measures for any site visit, either before or after acceptance of bid.    Bidders mustrefer to R2710T GENERAL INSTRUCTIONS  Construction Services  Bid Security Requirements (2016-04-04) for the Integrity Provisions applicable to this requirement.  IMPORTANT NOTICE TO SUPPLIERS: The Government Electronic Tendering Service is available at Buyandsell.gc.ca/tenders.  This web site will be the sole authoritative source forGovernment of Canada tenders, and Bidders are responsible for obtaining copies of tender forms and special instructions directly from this web site.  Firms that elect to base their bids on tender documents obtained from other sources do so at their own risk.    Drawings and Specifications are available for viewing and downloading from this website in a Portable Document Format (PDF). Bidders should note that the Drawings and Specifications Package (DSP), which consistsof PDF files organized in an industry recognized directory structure, is included under Attachments.     Standard terms and conditions for this procurement are incorporated by reference into, and form part of, the tender and contract documents. These may beviewed at https://buyandsell.gc.ca/policy-and-guidelines/standard-acquisition-clauses-and-conditions-manual/all.   It is the responsibility of the Bidder to ensure that all addenda issued prior to solicitation closing have been obtained and addressed in the submitted tender.  Addenda, when issued, willalso be available on this site.     Bids will be received in English, or French, at:  Public Works and Government Services Canada, Bid Receiving Unit, 10 Barter's Hill, P.O. Box 4600, St. John's, Newfoundland and Labrador, A1C 5T2.  Bid Security is a requirement for this tender.  The estimated value for this opportunity is within the range of: $100,001.00 to $250,000.00.   Delivery Date Required:  Eighteen (18) weeks after award of contract.  GSIN # 5161AF   Delivery Date: Above-mentioned  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Nanostring nCounter Sprint

Agriculture and Agri-Food Canada | Published September 2, 2016
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address:  Nanostring Technologies, Inc. 530 Fairview Avenue North Suite 2000 Seattle Washington United States 98109 Nature of Requirements:   01799-170311/A Lomax, Sandra Telephone No. - (506) 636-4362  Fax No. - (506) 636-4376   Nanostring nCounter Sprint  Advance Contract Award Notice (ACAN)  An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.  Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Nanostring nCounter Sprint.  It is a device used to analyze differential expression of genes and proteins.   It used to research projects on plant genomics, physiology and molecular biology.      Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements:  Mandatory Requirements  Item 1.  An integrated system which employs digital barcode technology to hybridize with target molecules to yield precise and sensitive quantification. Up to 800 targets can be measured simultaneously in a single sample, and up to 12 samples can be assayed in a single run.   A NanosSring nCounter Sprint profiler NCT-SPRINT-3Y, Installation and training, 12 month warranty including parts and labor.  Item 2.  Two years maintenance service contract beyond first 12 months.  The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) - World Trade Organization  Agreement on Government Procurement (WTO-AGP)  The reason for single tendering is; only one firm is capable of performing the contract.  The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d)   Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technicalreasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively.  Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to  where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;  Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists;  The product must be delivered on or beforeMarch 31, 2017.  The estimated value of the contract is $231,231.00 HST extra  Suppliers' right to submit a statement of capabilities:  Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets theadvertised requirements.  Closing date and time for accepting statements of capabilities:   Submissions must be received on or by 2:00 p.m. September 20, 2016.   Inquiries and statement of capabilities are to be directed to:  Sandra Lomax, Supply Officer   Public Works and Government Services Canada 189 Prince William St Saint John, NB   E2L 2B9   Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned  You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.  An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.  However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.  Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.  The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.  The Crown retains the right to negotiate with suppliers on any procurement.  Documents may be submitted in either official language of Canada.

Automated Library Prep Station

Agriculture and Agri-Food Canada | Published November 25, 2015
cpvs

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: Illumina Canada, Inc. 5200 Illumina Way San Diego California United States 92122 Nature of Requirements: 01799-160705/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 Automated Library Prep Station Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. The Department of Agriculture and Agri-Food Canada hasrequirement to provide one (1) NeoPrep Library System. It is an automated robotic system that will prepare libraries for Illumina next-generation sequencing. It will develop genetic markers for selection and breeding, gene expression indicators for fertilizer and potato storage management and viral diagnostic methods. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Item 1. An integratedsystem to prepare libraries for Illumina next-generation sequencing (NGS) platforms. Prepare sixteen (16) libraries per run without user intervention and provide uninterrupted walk away time. A platform that can generate quantified and normalized sequencing-ready libraries and delivers high-quality and reproducible results even from low amounts of DNA or RNA. An on-instrument touchscreen and internal computer, NeoPrep Control Software, barcode scanner and 12 month warranty. Item 2. One year maintenance service contract. Includes full coverage for parts, labor and travel; reagent replacement upon hardware failures; 1 preventative maintenance visit per year; remote Technical Support; 3 business day average on-site response; hardware/software updates; on-site applications support; and discounts on advanced training. One year maintenance service contract to take effect when the 12 month warranty in item 1 expires. The procurement is subject to the following trade agreement: - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) In order to maintain scientific consistency and comparability across this broad ranging research initiative it is required that all data production across time frames and collaborators is carried out on comparable machines. Articles 506.12 (a) and 506.12(b) of AIT are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; The estimated value of the contract is $60,000.00 Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities Submissions must be received on or by 2:00 p.m. December 10, 2015. Inquiries and statement of capabilities are to be directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer

Agriculture and Agri-Food Canada | Published December 11, 2015
cpvs

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Interchangeable Parts Comprehensive Land Claim Agreement: No Vendor Name and Address: BRUKER LTD. 555 Steeles Ave East Milton Ontario Canada L9T1Y6 Nature of Requirements: 01913-160967/A Lomax, Sandra Telephone No. - (506) 636-4362 Fax No. - (506) 636-4376 600 MHz Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating tothe supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. Public Works and Government Services Canada (PWGSC), on behalf of its client, the Department of Agriculture and Agri-Food Canada has requirement for the supply and deliver of one (1) Comprehensive Multi-Phase Nuclear Magnetic Resonance Spectrometer. It is used to study the structure of molecules. Any interested supplies must demonstrate by way of a statement of capabilities that it meets the following Mandatory Requirements: Mandatory Requirements Magnet: Shielded 14.1 Tesla (1H operating frequency of 600 MHz) superconducting narrow bore Amplifiers: 1H 300 Watt minimum pulse power X 500 Watt minimum pulse power Y 500 Watt minimum pulse power Gradient: 40 Gauss/cm minimum Automation: Sample Changer (24 sample minimum) for solution NMR including spinners Software: The system must supplied with acquisition and processing (1D, 2D, and 3D) software. Probes: A) Solution 10 mm broad band observe (31P 15N minimum) with a single axis gradient. The probe must be tunable through automation. B) 4-mm gradient semi-solid high resolution magic angle spinning (HR-MAS) triple-resonance (1H/31P/13C) probe with a lock (2D) channel. It must able be able to perform triple resonance experiments (observe 1H, 31P, or 13C and simultaneously decouple the other two nuclei). It must be able to generate a gradient of at least 40 Gauss/cm (minimum) along the magic angle. Samples must be able to be changed without removal of the probe. C) 4-mm dual resonance (1H/X) MAS probe. It must tunable from 31P to 15N (minimum). Samples must be able to be changed without removal of the probe. D) 2.5-mm triple resonance (1H/X/Y) MAS probe. The X channel must tunable from 15N to 13C and the Y channel from 13C to 31P (minimal ranges). Samples must be able to be changed without removal of the probe. Additional Accessories: - Variable Temperature Controller and accessories required for low temperature operation - Magic Angle Spinning Control unit (including spinning rate counter, stabilization and sample eject) The procurement is subject to the following trade agreement: - World Trade Organization Agreement on Government Procurement (WTO-AGP) - Agreement on Internal Trade (AIT) - North American Free Trade Agreement (NAFTA) The reason for single tendering is; only one firm is capable of performing the contract. The following exception to the Government Contact Regulations is invoked for this procurement under subsection 6(d) Articles 506.12(a) and 506.12(b) of AIT are applicable on thebasis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative and where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists, respectively. Articles 1016.2 (b) and 1016.2 (d) of NAFTA are applicable on the basis of limited tendering due to where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists and for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter; Article XV.1(b) of WTO-AGP are applicable on the basis of limited tendering due to when, for works ofart or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternativeor substitute exists; The product must be delivered on or before March 31, 2016. The estimated value of the contract is $1,350,000.00 HST extra Suppliers' right to submit a statement of capabilities: Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. Closing date and time for accepting statements of capabilities: Submissions must be received on or by 2:00 p.m. December 29, 2015. Inquiries and statement of capabilities are tobe directed to: Sandra Lomax, Supply Specialist Public Works and Government Services Canada 189 Prince William St Saint John, NB E2L 2B9 Telephone No. (506) 636-4362 Fax No. (506 636-4376 Email sandra.lomax@pwgsc.gc.ca Delivery Date: Above-mentioned You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above. An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process. Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. The Crown retains the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.
  • 1